linux-kernel - Re: [PATCH v4 1/2] arm64: dts: rockchip: Add EmbedFire LubanCat 1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <88357291-3cdd-8d5a-fdec-38bd081a4235@linaro.org>
Date:   Wed, 21 Dec 2022 09:15:40 +0100
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Yuteng Zhong <zonyitoo@...il.com>, Heiko Stuebner <heiko@...ech.de>
Cc:     Rob Herring <robh+dt@...nel.org>, Peter Geis <pgwipeout@...il.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-rockchip@...ts.infradead.org, DHDAXCW <lasstp5011@...il.com>
Subject: Re: [PATCH v4 1/2] arm64: dts: rockchip: Add EmbedFire LubanCat 1

On 21/12/2022 06:46, Yuteng Zhong wrote:
> from: DHDAXCW <lasstp5011@...il.com>
> 
> LubanCat 1 is a Rockchip RK3566 SBC based
> is developed by EmbedFire Electronics Co., Ltd.
> Mini Linux Card Type Cheap Computer Development Board
> 
> It has the following characteristics:
> - MicroSD card slot, onboard eMMC flash memory
> - 1GbE Realtek RTL8211F Ethernet Transceiver
> - 1 USB Type-C port (power and USB2.0 OTG)
> - 1 USB 3.0 Host port
> - 3 USB 2.0 Host ports
> - 1 HDMI
> - 1 infrared receiver
> - 1 MIPI DSI
> - 1 MIPI CSI
> - 1 x 4-section headphone jack
> - Mini PCIe socket (USB or PCIe)
> - 1 SIM Card slot
> - 1 SYS LED and 1 PWR LED
> - 40-pin GPIO expansion header
> 
> Signed-off-by: Yuteng Zhong <zonyitoo@...il.com>
> Signed-off-by: DHDAXCW <lasstp5011@...il.com>
> ---
> 
> Changed in V2:
>   - Remove RNG node
> Changed in V3:
>   - Sent E-mail with a wrong attachment
> Changed in V4:
>   - Modify all node names
> 
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../boot/dts/rockchip/rk3566-lubancat-1.dts   | 598 ++++++++++++++++++
>  2 files changed, 599 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 0a76a2ebb5f6..e52bda04d45a 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
> new file mode 100644
> index 000000000000..443fcfabbd16
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
> @@ -0,0 +1,598 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> +* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> +*/
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
> +#include "rk3566.dtsi"
> +
> +/ {
> +	model = "EmbedFire LubanCat 1";
> +	compatible = "embedfire,lubancat-1", "rockchip,rk3566";
> +
> +	aliases {
> +		ethernet0 = &gmac1;
> +		mmc0 = &sdmmc0;
> +		mmc1 = &sdhci;
> +	};
> +
> +	chosen: chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};
> +
> +	gmac1_clkin: external-gmac1-clock {
> +		compatible = "fixed-clock";
> +		clock-frequency = <125000000>;
> +		clock-output-names = "gmac1_clkin";
> +		#clock-cells = <0>;
> +	};
> +	
> +	hdmi-con {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_con_in: endpoint {
> +				remote-endpoint = <&hdmi_out_con>;
> +			};
> +		};
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +
> +		sys_led: sys-led {
> +			label = "sys_led";
> +			linux,default-trigger = "heartbeat";
> +			default-state = "on";
> +			gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&sys_led_pin>;
> +		};
> +	};
> +
> +	usb_5v: usb-5v-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_5v";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +
> +	vcc5v0_sys: vcc5v0-sys-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&usb_5v>;
> +	};
> +
> +	vcc3v3_sys: vcc3v3-sys {

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc3v3_pcie: vcc3v3-pcie-regulator {


Best regards,
Krzysztof