[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221221210917.458537-4-fabrizio.castro.jz@renesas.com>
Date: Wed, 21 Dec 2022 21:09:16 +0000
From: Fabrizio Castro <fabrizio.castro.jz@...esas.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Sebastian Reichel <sre@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>
Cc: Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
Lee Jones <lee@...nel.org>, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org,
Chris Paterson <Chris.Paterson2@...esas.com>,
Biju Das <biju.das@...renesas.com>,
linux-renesas-soc@...r.kernel.org,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Jacopo Mondi <jacopo@...ndi.org>
Subject: [PATCH v2 3/4] gpio: Add support for the Renesas RZ/V2M PWC GPIOs
The RZ/V2M SoC contains an External Power Sequence Controller
(PWC) module. The PWC module provides an external power supply
on/off sequence, on/off signal for the LPDDR4 core power supply,
General-Purpose Outputs, and key input signals.
Add a driver for controlling the General-Purpose Outputs.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@...esas.com>
---
v1->v2: Dropped OF match table and syscon as a result of the change in
DT model
drivers/gpio/Kconfig | 10 ++++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-rzv2m-pwc.c | 105 ++++++++++++++++++++++++++++++++++
3 files changed, 116 insertions(+)
create mode 100644 drivers/gpio/gpio-rzv2m-pwc.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index ec7cfd4f52b1..4c77fb6966e0 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -553,6 +553,16 @@ config GPIO_ROCKCHIP
help
Say yes here to support GPIO on Rockchip SoCs.
+config GPIO_RZV2M_PWC
+ tristate "Renesas RZ/V2M PWC GPIO support"
+ depends on MFD_RZV2M_PWC_CORE || COMPILE_TEST
+ help
+ Say yes here to support the External Power Sequence Controller (PWC)
+ GPIO controller driver for RZ/V2M devices.
+
+ The PWSDxSEL pins can be used as General-Purpose Ouputs.
+ Their output is low by default.
+
config GPIO_SAMA5D2_PIOBU
tristate "SAMA5D2 PIOBU GPIO support"
depends on MFD_SYSCON
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 010587025fc8..a5c159ae9db5 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -132,6 +132,7 @@ obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_REALTEK_OTTO) += gpio-realtek-otto.o
obj-$(CONFIG_GPIO_REG) += gpio-reg.o
obj-$(CONFIG_GPIO_ROCKCHIP) += gpio-rockchip.o
+obj-$(CONFIG_GPIO_RZV2M_PWC) += gpio-rzv2m-pwc.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SAMA5D2_PIOBU) += gpio-sama5d2-piobu.o
obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o
diff --git a/drivers/gpio/gpio-rzv2m-pwc.c b/drivers/gpio/gpio-rzv2m-pwc.c
new file mode 100644
index 000000000000..19bdb949b3d3
--- /dev/null
+++ b/drivers/gpio/gpio-rzv2m-pwc.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Renesas Electronics Corporation
+ *
+ * GPIO driver for Renesas RZ/V2M External Power Sequence Controller (PWC)
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include "../mfd/rzv2m-pwc.h"
+
+struct rzv2m_pwc_gpio_priv {
+ void __iomem *base;
+ struct gpio_chip gp;
+ DECLARE_BITMAP(ch_en_bits, 2);
+};
+
+static void rzv2m_pwc_gpio_set(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+ struct rzv2m_pwc_gpio_priv *priv = gpiochip_get_data(chip);
+ u32 reg;
+
+ /* BIT 16 enables write to BIT 0, and BIT 17 enables write to BIT 1 */
+ reg = BIT(offset + 16);
+ if (value)
+ reg |= BIT(offset);
+
+ writel(reg, priv->base + PWC_GPIO);
+
+ if (value)
+ set_bit(offset, priv->ch_en_bits);
+ else
+ clear_bit(offset, priv->ch_en_bits);
+}
+
+static int rzv2m_pwc_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct rzv2m_pwc_gpio_priv *priv = gpiochip_get_data(chip);
+
+ return test_bit(offset, priv->ch_en_bits);
+}
+
+static int rzv2m_pwc_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int nr, int value)
+{
+ if (nr > 1)
+ return -EINVAL;
+
+ rzv2m_pwc_gpio_set(gc, nr, value);
+
+ return 0;
+}
+
+static const struct gpio_chip rzv2m_pwc_gc = {
+ .label = "gpio_rzv2m_pwc",
+ .owner = THIS_MODULE,
+ .get = rzv2m_pwc_gpio_get,
+ .set = rzv2m_pwc_gpio_set,
+ .direction_output = rzv2m_pwc_gpio_direction_output,
+ .can_sleep = false,
+ .ngpio = 2,
+ .base = -1,
+};
+
+static int rzv2m_pwc_gpio_probe(struct platform_device *pdev)
+{
+ struct rzv2m_pwc_priv *pdata = dev_get_drvdata(pdev->dev.parent);
+ struct rzv2m_pwc_gpio_priv *priv;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->base = pdata->base;
+ /*
+ * The register used by this driver cannot be read, therefore set the
+ * outputs to their default values and initialize priv->ch_en_bits
+ * accordingly. BIT 16 enables write to BIT 0, BIT 17 enables write to
+ * BIT 1, and the default value of both BIT 0 and BIT 1 is 0.
+ */
+ writel(BIT(17) | BIT(16), priv->base + PWC_GPIO);
+ bitmap_zero(priv->ch_en_bits, 2);
+
+ priv->gp = rzv2m_pwc_gc;
+ priv->gp.parent = pdev->dev.parent;
+ priv->gp.fwnode = dev_fwnode(pdev->dev.parent);
+
+ return devm_gpiochip_add_data(&pdev->dev, &priv->gp, priv);
+}
+
+static struct platform_driver rzv2m_pwc_gpio_driver = {
+ .probe = rzv2m_pwc_gpio_probe,
+ .driver = {
+ .name = "gpio_rzv2m_pwc",
+ },
+};
+module_platform_driver(rzv2m_pwc_gpio_driver);
+
+MODULE_ALIAS("platform:gpio_rzv2m_pwc");
+MODULE_SOFTDEP("pre: rzv2m_pwc");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Fabrizio Castro <castro.fabrizio.jz@...esas.com>");
+MODULE_DESCRIPTION("Renesas RZ/V2M PWC GPIO");
--
2.34.1
Powered by blists - more mailing lists