[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <697f07b4-87e6-9fa5-4298-82b075a96264@linaro.org>
Date: Thu, 22 Dec 2022 16:14:47 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Vinod Koul <vkoul@...nel.org>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Joel Selvaraj <joelselvaraj.oss@...il.com>,
Marijn Suijten <marijn.suijten@...ainline.org>,
Caleb Connolly <caleb@...nolly.tech>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Douglas Anderson <dianders@...omium.org>
Subject: Re: [PATCH v4 4/4] arm64: dts: qcom: sdm845: do not customize SPI0
pin drive/bias
On 22.12.2022 16:13, Krzysztof Kozlowski wrote:
> Each board should define pin drive/bias for used busses. All boards
> using SPI0 (db845c and cheza) already do it, so drop the bias/drive
> strength from SoC DTSI.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> Reviewed-by: Douglas Anderson <dianders@...omium.org>
>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Konrad
>
> Cc: Doug Anderson <dianders@...omium.org>
>
> Changes since v3:
> 1. Rb tag
>
> Changes since v2:
> 1. New patch.
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index dcea535de9b7..cac70212cc2a 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -2785,8 +2785,6 @@ qup_i2c15_default: qup-i2c15-default-state {
> qup_spi0_default: qup-spi0-default-state {
> pins = "gpio0", "gpio1", "gpio2", "gpio3";
> function = "qup0";
> - drive-strength = <6>;
> - bias-disable;
> };
>
> qup_spi1_default: qup-spi1-default-state {
Powered by blists - more mailing lists