linux-kernel - [PATCH v2] dt-bindings: pinctrl: qcom,sm8450-lpass-lpi: add input-enable and bias-bus-hold

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20221222161420.172824-1-krzysztof.kozlowski@linaro.org>
Date:   Thu, 22 Dec 2022 17:14:20 +0100
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
        linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v2] dt-bindings: pinctrl: qcom,sm8450-lpass-lpi: add input-enable and bias-bus-hold

Allow bias-bus-hold and input-enable properties (already used in SM8450):

  sm8450-qrd.dtb: pinctrl@...0000: dmic02-default-state: 'oneOf' conditional failed, one must be fixed:
    'pins' is a required property
    'function' is a required property
    'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
    'input-enable' does not match any of the regexes: 'pinctrl-[0-9]+'

Compact the properties which are just set to true for readability.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>

---

Changes since v1:
1. Add input-enable.
---
 .../bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml     | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
index 01a0a4a40ba5..e04d094d1946 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
@@ -96,14 +96,12 @@ $defs:
           2: Lower Slew rate (slower edges)
           3: Reserved (No adjustments)
 
+      bias-bus-hold: true
       bias-pull-down: true
-
       bias-pull-up: true
-
       bias-disable: true
-
+      input-enable: true
       output-high: true
-
       output-low: true
 
     required:
-- 
2.34.1