Message-ID: <CAHBxVyEZJeH6H00Jdcm2_=z-D2kYxVTgagYhmLoyJ2CPqcFbgg@mail.gmail.com>
Date:   Thu, 22 Dec 2022 11:55:29 -0800
From:   Atish Kumar Patra <atishp@...osinc.com>
To:     Conor Dooley <conor@...nel.org>
Cc:     Rob Herring <robh@...nel.org>, krzysztof.kozlowski+dt@...aro.org,
        palmer@...belt.com, Conor Dooley <conor.dooley@...rochip.com>,
        devicetree@...r.kernel.org, linux-riscv@...ts.infradead.org,
        linux-kernel@...r.kernel.org, apatel@...tanamicro.com,
        Will Deacon <will@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        opensbi@...ts.infradead.org
Subject: Re: [PATCH v1] dt-bindings: riscv: add SBI PMU event mappings

On Thu, Dec 22, 2022 at 11:24 AM Conor Dooley <conor@...nel.org> wrote:
>
> Hey Rob,
>
> On Thu, Dec 22, 2022 at 12:06:27PM -0600, Rob Herring wrote:
> > On Wed, Dec 21, 2022 at 02:15:49PM +0000, Conor Dooley wrote:
> > > From: Conor Dooley <conor.dooley@...rochip.com>
> > >
> > > The SBI PMU extension requires a firmware to be aware of the event to
> > > counter/mhpmevent mappings supported by the hardware. OpenSBI may use
> > > DeviceTree to describe the PMU mappings. This binding is currently
> > > described in markdown in OpenSBI (since v1.0 in Dec 2021) & used by QEMU
> > > since v7.2.0.
> > >
> > > Import the binding for use while validating dtb dumps from QEMU and
> > > upcoming hardware (eg JH7110 SoC) that will make use of the event
> > > mapping.
> > >
> > > Link: https://github.com/riscv-software-src/opensbi/blob/master/docs/pmu_support.md
> > > Co-developed-by: Atish Patra <atishp@...osinc.com>
> > > Signed-off-by: Atish Patra <atishp@...osinc.com>
> > > Signed-off-by: Conor Dooley <conor.dooley@...rochip.com>
> > > ---
> > > I asked Rob on IRC about these bindings a few weeks ago & he said he
> > > would be willing to take them. I have modified wording slightly in the
> > > descriptions, but have mostly left things as close to the OpenSBI
> > > documentation as possible.
> >
> > Please CC the perf maintainers. Might be crickets, but so they at least
> > have a chance to see it.
>
> Yah, I was kinda unsure who to CC. It does list them as being
> specifically ARM so I probably made the wrong choice about inclusion.
> I've added them now.
>
> > > I'm not super sure about what I've done with the properties being
> > > correct type wise, I went digging in bindings and am sorta using the
> > > first thing that "fit".
> > >
> > > Since you wrote the md doc Atish, I put your co-developed-by. OpenSBI
> > > is BSD-2-Clause licensed so I am also unsure as to what license I can
> > > use for this binding since that's where I took it from.
> > > ---
> > >  .../devicetree/bindings/perf/riscv,pmu.yaml   | 158 ++++++++++++++++++
> > >  1 file changed, 158 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/perf/riscv,pmu.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/perf/riscv,pmu.yaml b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml
> > > new file mode 100644
> > > index 000000000000..d65f937680af
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml
> > > @@ -0,0 +1,158 @@
> > > +# SPDX-License-Identifier: BSD-2-Clause
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/perf/riscv,pmu.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: RISC-V SBI PMU events
> > > +
> > > +maintainers:
> > > +  - Atish Patra <atishp@...osinc.com>
> > > +
> > > +description: |
> > > +  SBI PMU extension supports allow supervisor software to configure, start &
> > > +  stop any performance counter at anytime. Thus, a user can leverage full
> > > +  capability of performance analysis tools such as perf if the SBI PMU
> > > +  extension is enabled. The OpenSBI implementation makes the following
> > > +  assumptions about the hardware platform:
> > > +    MCOUNTINHIBIT CSR must be implemented in the hardware. Otherwise, the SBI
> > > +    PMU extension will not be enabled.
> > > +

This is no longer true since OpenSBI commit b28f070. We should remove
this from OpenSBI docs as well.

> > > +    The platform must provide information about PMU event to counter mapping
> > > +    via device tree or platform specific hooks. Otherwise, the SBI PMU
> > > +    extension will not be enabled.
> > > +
> > > +    The platforms should provide information about the PMU event selector
> > > +    values that should be encoded in the expected value of MHPMEVENTx while
> > > +    configuring MHPMCOUNTERx for that specific event. This can be done via a
> > > +    device tree or platform specific hooks. The exact value to be written to
> > > +    the MHPMEVENTx is completely dependent on the platform. The generic
> > > +    platform writes the zero-extended event_idx as the expected value for
> > > +    hardware cache/generic events as suggested by the SBI specification.
> > > +

But the larger question is these are OpenSBI implementation specific
assumptions. Should it be included in
the DT binding ?

> > > +properties:
> > > +  compatible:
> > > +    const: riscv,pmu
> > > +
> > > +  riscv,event-to-mhpmevent:
> > > +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> > > +    description:
> > > +      Represents an ONE-to-ONE mapping between a PMU event and the event
> > > +      selector value that platform expects to be written to the MHPMEVENTx CSR
> > > +      for that event.
> > > +      The mapping is encoded in an array format where each row represents an
> >
> > s/array/matrix/
> >
> > > +      event. The first element represents the event idx while the second &
> > > +      third elements represent the event selector value that should be encoded
> > > +      in the expected value to be written in MHPMEVENTx.
> > > +      This property shouldn't encode any raw hardware event.
> > > +    minItems: 1
> > > +    maxItems: 255
>
> I copied these 255s from dt-schema somewhere as a sane max.
> Atish, is there a cap here or should we allow as many as someone likes?
> The md binding doesn't mention any limits - is it in the SBI spec?
> The strongest wording I saw there was "limited" & event idx is 20 bits
> wide as per the spec [0]. Does that make 2^20 the hard limit here?
>

This is for hardware & cache events. The total number of events
defined there are 52 (10 HW + 42 Cache) events.
So 255 is a sane max that provides enough room for expansion in future
if required.

> 0 - https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/riscv-sbi.adoc#11-performance-monitoring-unit-extension-eid-0x504d55-pmu
>
> > > +    items:
> > > +      $ref: /schemas/types.yaml#/definitions/uint32-array
> >
> > Huh? A property can only have 1 type. I wonder what the tools do with
> > this...
>
> I suppose I left this over (by accident) from when I had it arranged
> slightly differently. I guess I never actually noticed as the tools
> don't appear to complain. Now dropped :)
>
> > > +      maxItems: 3
> >
> > Better to do:
> >
> >          items:
> >            - description: what's in the 1st word
> >            - description: what's in the 2nd word
> >            - description: what's in the 3rd word
> >
> > And rework the overall description to not say the same thing.
>
> Yah, good idea. I'll do that for the next version.
>
> > > +  riscv,event-to-mhpmcounters:
> > > +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> > > +    description:
> > > +      Represents a MANY-to-MANY mapping between a range of events and all the
> > > +      MHPMCOUNTERx in a bitmap format that can be used to monitor these range
> > > +      of events. The information is encoded in an array format where each
> > > +      row represents a certain range of events and corresponding counters.
> > > +      The first element represents starting of the pmu event id and 2nd column
> > > +      represents the end of the pmu event id. The third element represent a
> > > +      bitmap of all the MHPMCOUNTERx.
> > > +      This property is mandatory if event-to-mhpmevent is present. Otherwise,
> > > +      it can be omitted.
> >
> > No need to state this in freeform text, use 'dependencies'.
>
> Oh! I didn't know that that existed. I was going to go and do some sort
> of required properties dance but perhaps that's not needed now (at least
> to the same extent).
>
> > > +      This property shouldn't encode any raw event.
> > > +    minItems: 1
> > > +    maxItems: 255
> > > +    items:
> > > +      $ref: /schemas/types.yaml#/definitions/uint32-array
> > > +      maxItems: 3
> > > +
> > > +  riscv,raw-event-to-mhpmcounters:
> > > +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> > > +    description:
> > > +      Represents an ONE-to-MANY or MANY-to-MANY mapping between the rawevent(s)
> > > +      and all the MHPMCOUNTERx in a bitmap format that can be used to monitor
> > > +      that raw event.
> > > +      The encoding of the raw events are platform specific. The information is
> > > +      encoded in an array format where each row represents the specific raw
> > > +      event(s). The first element is a 64-bit match value where the invariant
> > > +      bits of range of events are set. The second element is a 64-bit mask that
> > > +      will have all the variant bits of the range of events cleared. All other
> > > +      bits should be set in the mask. The third element is a 32-bit value to
> > > +      represent bitmap of all MHPMCOUNTERx that can monitor these set of
> > > +      event(s). If a platform directly encodes each raw PMU event as a unique
> > > +      ID, the value of select_mask must be 0xffffffff_ffffffff.
> > > +    minItems: 1
> > > +    maxItems: 255
> > > +    items:
> > > +      $ref: /schemas/types.yaml#/definitions/uint32-array
> > > +      maxItems: 5
> > > +
> > > +required:
> > > +  - compatible
> >
> > I assume at least one of the other properties must be present?
>
> Atish: (and +CC the OpenSBI list)
> Which properties are actually needed here? Or are any? The md binding
> in the OpenSBI sources doesn't seem to require anything other than the
> compatible?
>

That's true. Opensbi allows the platform to define functions
to provide the mapping. Now that's an OpenSBI implementation thing.
Other implementations may choose to use it differently.


> Thanks Rob,
> Conor.
>

Powered by blists - more mailing lists