linux-kernel - Re: [PATCH 1/2] scsi: ufs: ufs-qcom: add basic interconnect support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <71bf6521-71d7-ec45-912f-e3dc6038d3a4@linaro.org>
Date:   Fri, 23 Dec 2022 00:17:23 +0200
From:   Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To:     Brian Masney <bmasney@...hat.com>, andersson@...nel.org
Cc:     agross@...nel.org, konrad.dybcio@...aro.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, jejb@...ux.ibm.com,
        martin.petersen@...cle.com, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-scsi@...r.kernel.org
Subject: Re: [PATCH 1/2] scsi: ufs: ufs-qcom: add basic interconnect support

On 17/11/2022 12:49, Brian Masney wrote:
> The firmware on the Qualcomm platforms expects the interconnect votes to
> be present. Let's add very basic support where the maximum throughput is
> requested to match what's done in a few other drivers.
> 
> This will not break boot on systems where the interconnects and
> interconnect-names properties are not specified in device tree for UFS
> since the interconnect framework will silently return.
> 
> Signed-off-by: Brian Masney <bmasney@...hat.com>
> ---
>   drivers/ufs/host/ufs-qcom.c | 25 +++++++++++++++++++++++++
>   1 file changed, 25 insertions(+)
> 
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index 8ad1415e10b6..55bf8dd88985 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -7,6 +7,7 @@
>   #include <linux/time.h>
>   #include <linux/clk.h>
>   #include <linux/delay.h>
> +#include <linux/interconnect.h>
>   #include <linux/module.h>
>   #include <linux/of.h>
>   #include <linux/platform_device.h>
> @@ -936,6 +937,22 @@ static const struct reset_control_ops ufs_qcom_reset_ops = {
>   	.deassert = ufs_qcom_reset_deassert,
>   };
>   
> +static int ufs_qcom_icc_init(struct device *dev, char *pathname)
> +{
> +	struct icc_path *path;
> +	int ret;
> +
> +	path = devm_of_icc_get(dev, pathname);
> +	if (IS_ERR(path))
> +		return dev_err_probe(dev, PTR_ERR(path), "failed to acquire interconnect path\n");
> +
> +	ret = icc_set_bw(path, 0, UINT_MAX);

I noticed that this patch bumps peak_bw (and leaves average_bw as 0), 
while vendor kernels bump average_bw, but ib (peak_bw) is set to 0.

> +	if (ret < 0)
> +		return dev_err_probe(dev, ret, "failed to set bandwidth request\n");
> +
> +	return 0;
> +}
> +
>   /**
>    * ufs_qcom_init - bind phy with controller
>    * @hba: host controller instance
> @@ -991,6 +1008,14 @@ static int ufs_qcom_init(struct ufs_hba *hba)
>   			err = dev_err_probe(dev, PTR_ERR(host->generic_phy), "Failed to get PHY\n");
>   			goto out_variant_clear;
>   		}
> +
> +		err = ufs_qcom_icc_init(dev, "ufs-ddr");
> +		if (err)
> +			goto out_variant_clear;
> +
> +		err = ufs_qcom_icc_init(dev, "cpu-ufs");
> +		if (err)
> +			goto out_variant_clear;
>   	}
>   
>   	host->device_reset = devm_gpiod_get_optional(dev, "reset",

-- 
With best wishes
Dmitry