linux-kernel - Re: [PATCH 2/3] ARM: dts: qcom: pm8226: add PON device node along with resin sub-node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5631229.DvuYhMxLoT@g550jk>
Date:   Mon, 26 Dec 2022 13:11:33 +0100
From:   Luca Weiss <luca@...tu.xyz>
To:     linux-arm-msm@...r.kernel.org,
        ~postmarketos/upstreaming@...ts.sr.ht
Cc:     ~postmarketos/upstreaming@...ts.sr.ht,
        Rayyan Ansari <rayyan@...ari.sh>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...ainline.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Rayyan Ansari <rayyan@...ari.sh>
Subject: Re: [PATCH 2/3] ARM: dts: qcom: pm8226: add PON device node along with resin
 sub-node

On Freitag, 23. Dezember 2022 20:34:02 CET Rayyan Ansari wrote:
> The PON (Power On) device in PM8226 supports both the power key and
> resin (reset input).
> The reset input is usually connected to a physical volume up/down button.
> 
> Signed-off-by: Rayyan Ansari <rayyan@...ari.sh>

Reviewed-by: Luca Weiss <luca@...tu.xyz>

> ---
>  arch/arm/boot/dts/qcom-pm8226.dtsi | 24 +++++++++++++++++++-----
>  1 file changed, 19 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi
> b/arch/arm/boot/dts/qcom-pm8226.dtsi index d99532ea70b2..403324a35cf5
> 100644
> --- a/arch/arm/boot/dts/qcom-pm8226.dtsi
> +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi
> @@ -1,5 +1,6 @@
>  // SPDX-License-Identifier: BSD-3-Clause
>  #include <dt-bindings/iio/qcom,spmi-vadc.h>
> +#include <dt-bindings/input/linux-event-codes.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/spmi/spmi.h>
> 
> @@ -10,12 +11,25 @@ pm8226_0: pm8226@0 {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
> 
> -		pwrkey@800 {
> -			compatible = "qcom,pm8941-pwrkey";
> +		pon@800 {
> +			compatible = "qcom,pm8916-pon";
>  			reg = <0x800>;
> -			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> -			debounce = <15625>;
> -			bias-pull-up;
> +
> +			pwrkey {
> +				compatible = "qcom,pm8941-
pwrkey";
> +				interrupts = <0x0 0x8 0 
IRQ_TYPE_EDGE_BOTH>;
> +				debounce = <15625>;
> +				bias-pull-up;
> +				linux,code = <KEY_POWER>;
> +			};
> +
> +			pm8226_resin: resin {
> +				compatible = "qcom,pm8941-resin";
> +				interrupts = <0x0 0x8 1 
IRQ_TYPE_EDGE_BOTH>;
> +				debounce = <15625>;
> +				bias-pull-up;
> +				status = "disabled";
> +			};
>  		};
> 
>  		smbb: charger@...0 {