[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <530561e9-9ef8-7c8c-8e73-838c86a92266@sholland.org>
Date: Tue, 27 Dec 2022 15:58:16 -0600
From: Samuel Holland <samuel@...lland.org>
To: Sasha Levin <sashal@...nel.org>, stable@...r.kernel.org
Cc: Andre Przywara <andre.przywara@....com>,
Vinod Koul <vkoul@...nel.org>, kishon@...nel.org,
wens@...e.org, jernej.skrabec@...il.com,
wsa+renesas@...g-engineering.com, linux-phy@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH AUTOSEL 5.10 1/7] phy: sun4i-usb: Add support for the H616
USB PHY
Hi Sasha,
On 12/27/22 14:35, Sasha Levin wrote:
> From: Andre Przywara <andre.przywara@....com>
>
> [ Upstream commit 0f607406525d25019dd9c498bcc0b42734fc59d5 ]
>
> The USB PHY used in the Allwinner H616 SoC inherits some traits from its
> various predecessors: it has four full PHYs like the H3, needs some
> extra bits to be set like the H6, and puts SIDDQ on a different bit like
> the A100. Plus it needs this weird PHY2 quirk.
>
> Name all those properties in a new config struct and assign a new
> compatible name to it.
>
> Signed-off-by: Andre Przywara <andre.przywara@....com>
> Reviewed-by: Samuel Holland <samuel@...lland.org>
> Link: https://lore.kernel.org/r/20221031111358.3387297-5-andre.przywara@arm.com
> Signed-off-by: Vinod Koul <vkoul@...nel.org>
> Signed-off-by: Sasha Levin <sashal@...nel.org>
> ---
> drivers/phy/allwinner/phy-sun4i-usb.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
> index 651d5e2a25ce..230987e55ece 100644
> --- a/drivers/phy/allwinner/phy-sun4i-usb.c
> +++ b/drivers/phy/allwinner/phy-sun4i-usb.c
> @@ -974,6 +974,17 @@ static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
> .missing_phys = BIT(1) | BIT(2),
> };
>
> +static const struct sun4i_usb_phy_cfg sun50i_h616_cfg = {
> + .num_phys = 4,
> + .type = sun50i_h6_phy,
> + .disc_thresh = 3,
> + .phyctl_offset = REG_PHYCTL_A33,
> + .dedicated_clocks = true,
> + .phy0_dual_route = true,
> + .hci_phy_ctl_clear = PHY_CTL_SIDDQ,
> + .needs_phy2_siddq = true,
This will fail to compile without b45c6d80325b ("phy: sun4i-usb:
Introduce port2 SIDDQ quirk"). However, like Andre mentioned in
reference to the devicetree updates[1], we were not expecting any of
these patches to be backported. Since you already dropped the DT
portion, there is no need to bother with these two patches either.
Regards,
Samuel
[1]: https://lore.kernel.org/lkml/20221220000115.19c152fe@slackpad.lan/
> +};
> +
> static const struct of_device_id sun4i_usb_phy_of_match[] = {
> { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
> { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
> @@ -988,6 +999,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
> { .compatible = "allwinner,sun50i-a64-usb-phy",
> .data = &sun50i_a64_cfg},
> { .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg },
> + { .compatible = "allwinner,sun50i-h616-usb-phy", .data = &sun50i_h616_cfg },
> { },
> };
> MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
Powered by blists - more mailing lists