linux-kernel - [PATCH] drm/i915/display: Check source height is

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20221226225246.1.I15dff7bb5a0e485c862eae61a69096caf12ef29f@changeid>
Date:   Mon, 26 Dec 2022 22:53:24 -0700
From:   Drew Davenport <ddavenport@...omium.org>
To:     intel-gfx@...ts.freedesktop.org
Cc:     Drew Davenport <ddavenport@...omium.org>,
        Daniel Vetter <daniel@...ll.ch>,
        David Airlie <airlied@...il.com>,
        Imre Deak <imre.deak@...el.com>,
        Jani Nikula <jani.nikula@...ux.intel.com>,
        Joonas Lahtinen <joonas.lahtinen@...ux.intel.com>,
        José Roberto de Souza <jose.souza@...el.com>,
        Juha-Pekka Heikkilä 
        <juha-pekka.heikkila@...el.com>,
        Matt Roper <matthew.d.roper@...el.com>,
        Rodrigo Vivi <rodrigo.vivi@...el.com>,
        Thomas Zimmermann <tzimmermann@...e.de>,
        Tvrtko Ursulin <tvrtko.ursulin@...ux.intel.com>,
        Ville Syrjälä 
        <ville.syrjala@...ux.intel.com>, dri-devel@...ts.freedesktop.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH] drm/i915/display: Check source height is > 0

The error message suggests that the height of the src rect must be at
least 1. Reject source with height of 0.

Signed-off-by: Drew Davenport <ddavenport@...omium.org>

---
I was investigating some divide-by-zero crash reports on ChromeOS which
pointed to the intel_adjusted_rate function. Further prodding showed
that I could reproduce this in a simple test program if I made src_h
some value less than 1 but greater than 0.

This seemed to be a sensible place to check that the source height is at
least 1. I tried to repro this issue on an amd device I had on hand, and
the configuration was rejected.

Would it make sense to add a check that source dimensions are at least 1
somewhere in core, like in drm_atomic_plane_check? Or is that a valid
use case on some devices, and thus any such check should be done on a
per-driver basis?

Thanks.

 drivers/gpu/drm/i915/display/skl_universal_plane.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/skl_universal_plane.c b/drivers/gpu/drm/i915/display/skl_universal_plane.c
index 4b79c2d2d6177..9b172a1e90deb 100644
--- a/drivers/gpu/drm/i915/display/skl_universal_plane.c
+++ b/drivers/gpu/drm/i915/display/skl_universal_plane.c
@@ -1627,7 +1627,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	u32 offset;
 	int ret;
 
-	if (w > max_width || w < min_width || h > max_height) {
+	if (w > max_width || w < min_width || h > max_height || h < 1) {
 		drm_dbg_kms(&dev_priv->drm,
 			    "requested Y/RGB source size %dx%d outside limits (min: %dx1 max: %dx%d)\n",
 			    w, h, min_width, max_width, max_height);
-- 
2.39.0.314.g84b9a713c41-goog