[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221228084028.46528-7-manivannan.sadhasivam@linaro.org>
Date: Wed, 28 Dec 2022 14:10:17 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: andersson@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, bp@...en8.de,
tony.luck@...el.com
Cc: quic_saipraka@...cinc.com, konrad.dybcio@...aro.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
james.morse@....com, mchehab@...nel.org, rric@...nel.org,
linux-edac@...r.kernel.org, quic_ppareek@...cinc.com,
luca.weiss@...rphone.com, ahalaney@...hat.com, steev@...i.org,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH v5 06/17] arm64: dts: qcom: sdm845: Fix the base addresses of LLCC banks
The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.
On SDM845, the size of the LLCC bank 0 needs to be reduced to 0x4500 as
there are LLCC BWMON registers located after this range.
Reported-by: Parikshit Pareek <quic_ppareek@...cinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 65032b94b46d..4db68d4d78df 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2132,8 +2132,11 @@ uart15: serial@...000 {
llcc: system-cache-controller@...0000 {
compatible = "qcom,sdm845-llcc";
- reg = <0 0x01100000 0 0x31000>, <0 0x01300000 0 0x50000>;
- reg-names = "llcc_base", "llcc_broadcast_base";
+ reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>,
+ <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>,
+ <0 0x01300000 0 0x50000>;
+ reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+ "llcc3_base", "llcc_broadcast_base";
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
--
2.25.1
Powered by blists - more mailing lists