| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 28 Dec 2022 15:53:48 -0800
From: Abhishek Kumar <kuabhs@...omium.org>
To: Dave Taht <dave.taht@...il.com>
Cc: kvalo@...nel.org, ath10k@...ts.infradead.org,
linux-wireless@...r.kernel.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Make-Wifi-fast <make-wifi-fast@...ts.bufferbloat.net>
Subject: Re: [PATCH] ath10k: snoc: enable threaded napi on WCN3990
Apologies for the late reply, Thanks Dave for your comment. My answer is inline.
On Tue, Dec 20, 2022 at 7:10 AM Dave Taht <dave.taht@...il.com> wrote:
>
> I am always interested in flent.org tcp_nup, tcp_ndown, and rrul_be
> tests on wifi hardware. In AP mode, especially, against a few clients
> in rtt_fair on the "ending the anomaly" test suite at the bottom of
> this link: https://www.cs.kau.se/tohojo/airtime-fairness/ . Of these,
> it's trying to optimize bandwidth more fairly and keep latencies low
> when 4 or more stations are trying to transmit (in a world with 16 or
> more stations online), that increasingly bothers me the most. I'm
> seeing 5+ seconds on some rtt_fair-like tests nowadays.
I used testing using iperf and conductive setup and fetched the
throughput data(mentioned below).
>
> I was also seeing huge simultaneous upload vs download disparities on
> the latest kernels, on various threads over here:
> https://forum.openwrt.org/t/aql-and-the-ath10k-is-lovely/59002 and
> more recently here:
> https://forum.openwrt.org/t/reducing-multiplexing-latencies-still-further-in-wifi/133605
Interesting, thanks for the pointer and probably the Qualcomm team is
aware of it.
>
> I don't understand why napi with the default budget (64) is even
> needed on the ath10k, as a single txop takes a minimum of ~200us, but
> perhaps your patch will help. Still, measuring the TCP statistics
> in-band would be nice to see. Some new tools are appearing that can do
> this, Apple's goresponsiveness, crusader... that are simpler to use
> than flent.
Here are some of the additional raw data with and without threaded napi:
==================================================
udp_rx(Without threaded NAPI)
435.98+-5.16 : Channel 44
439.06+-0.66 : Channel 157
udp_rx(With threaded NAPI)
509.73+-41.03 : Channel 44
549.97+-7.62 : Channel 157
===================================================
udp_tx(Without threaded NAPI)
461.31+-0.69 : Channel 44
461.46+-0.78 : Channel 157
udp_tx(With threaded NAPI)
459.20+-0.77 : Channel 44
459.78+-1.08 : Channel 157
===================================================
tcp_rx(Without threaded NAPI)
472.63+-2.35 : Channel 44
469.29+-6.31 : Channel 157
tcp_rx(With threaded NAPI)
498.49+-2.44 : Channel 44
541.14+-40.65 : Channel 157
===================================================
tcp_tx(Without threaded NAPI)
317.34+-2.37 : Channel 44
317.01+-2.56 : Channel 157
tcp_tx(With threaded NAPI)
371.34+-2.36 : Channel 44
376.95+-9.40 : Channel 157
====================================================
>
> On Tue, Dec 20, 2022 at 12:17 AM Abhishek Kumar <kuabhs@...omium.org> wrote:
> >
> > NAPI poll can be done in threaded context along with soft irq
> > context. Threaded context can be scheduled efficiently, thus
> > creating less of bottleneck during Rx processing. This patch is
> > to enable threaded NAPI on ath10k driver.
> >
> > Based on testing, it was observed that on WCN3990, the CPU0 reaches
> > 100% utilization when napi runs in softirq context. At the same
> > time the other CPUs are at low consumption percentage. This
> > does not allow device to reach its maximum throughput potential.
> > After enabling threaded napi, CPU load is balanced across all CPUs
> > and following improvments were observed:
> > - UDP_RX increase by ~22-25%
> > - TCP_RX increase by ~15%
> >
> > Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2-00696-QCAHLSWMTPL-1
> > Signed-off-by: Abhishek Kumar <kuabhs@...omium.org>
> > ---
> >
> > drivers/net/wireless/ath/ath10k/core.c | 16 ++++++++++++++++
> > drivers/net/wireless/ath/ath10k/hw.h | 2 ++
> > drivers/net/wireless/ath/ath10k/snoc.c | 3 +++
> > 3 files changed, 21 insertions(+)
> >
> > diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
> > index 5eb131ab916fd..ee4b6ba508c81 100644
> > --- a/drivers/net/wireless/ath/ath10k/core.c
> > +++ b/drivers/net/wireless/ath/ath10k/core.c
> > @@ -100,6 +100,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = false,
> > .use_fw_tx_credits = true,
> > .delay_unmap_buffer = false,
> > + .enable_threaded_napi = false,
> > },
> > {
> > .id = QCA988X_HW_2_0_VERSION,
> > @@ -140,6 +141,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = false,
> > .use_fw_tx_credits = true,
> > .delay_unmap_buffer = false,
> > + .enable_threaded_napi = false,
> > },
> > {
> > .id = QCA9887_HW_1_0_VERSION,
> > @@ -181,6 +183,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = false,
> > .use_fw_tx_credits = true,
> > .delay_unmap_buffer = false,
> > + .enable_threaded_napi = false,
> > },
> > {
> > .id = QCA6174_HW_3_2_VERSION,
> > @@ -217,6 +220,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = false,
> > .use_fw_tx_credits = true,
> > .delay_unmap_buffer = false,
> > + .enable_threaded_napi = false,
> > },
> > {
> > .id = QCA6174_HW_2_1_VERSION,
> > @@ -257,6 +261,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = false,
> > .use_fw_tx_credits = true,
> > .delay_unmap_buffer = false,
> > + .enable_threaded_napi = false,
> > },
> > {
> > .id = QCA6174_HW_2_1_VERSION,
> > @@ -297,6 +302,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = false,
> > .use_fw_tx_credits = true,
> > .delay_unmap_buffer = false,
> > + .enable_threaded_napi = false,
> > },
> > {
> > .id = QCA6174_HW_3_0_VERSION,
> > @@ -337,6 +343,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = false,
> > .use_fw_tx_credits = true,
> > .delay_unmap_buffer = false,
> > + .enable_threaded_napi = false,
> > },
> > {
> > .id = QCA6174_HW_3_2_VERSION,
> > @@ -381,6 +388,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = false,
> > .use_fw_tx_credits = true,
> > .delay_unmap_buffer = false,
> > + .enable_threaded_napi = false,
> > },
> > {
> > .id = QCA99X0_HW_2_0_DEV_VERSION,
> > @@ -427,6 +435,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = false,
> > .use_fw_tx_credits = true,
> > .delay_unmap_buffer = false,
> > + .enable_threaded_napi = false,
> > },
> > {
> > .id = QCA9984_HW_1_0_DEV_VERSION,
> > @@ -480,6 +489,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = false,
> > .use_fw_tx_credits = true,
> > .delay_unmap_buffer = false,
> > + .enable_threaded_napi = false,
> > },
> > {
> > .id = QCA9888_HW_2_0_DEV_VERSION,
> > @@ -530,6 +540,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = false,
> > .use_fw_tx_credits = true,
> > .delay_unmap_buffer = false,
> > + .enable_threaded_napi = false,
> > },
> > {
> > .id = QCA9377_HW_1_0_DEV_VERSION,
> > @@ -570,6 +581,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = false,
> > .use_fw_tx_credits = true,
> > .delay_unmap_buffer = false,
> > + .enable_threaded_napi = false,
> > },
> > {
> > .id = QCA9377_HW_1_1_DEV_VERSION,
> > @@ -612,6 +624,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = false,
> > .use_fw_tx_credits = true,
> > .delay_unmap_buffer = false,
> > + .enable_threaded_napi = false,
> > },
> > {
> > .id = QCA9377_HW_1_1_DEV_VERSION,
> > @@ -645,6 +658,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = false,
> > .use_fw_tx_credits = true,
> > .delay_unmap_buffer = false,
> > + .enable_threaded_napi = false,
> > },
> > {
> > .id = QCA4019_HW_1_0_DEV_VERSION,
> > @@ -692,6 +706,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = false,
> > .use_fw_tx_credits = true,
> > .delay_unmap_buffer = false,
> > + .enable_threaded_napi = false,
> > },
> > {
> > .id = WCN3990_HW_1_0_DEV_VERSION,
> > @@ -725,6 +740,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .hw_restart_disconnect = true,
> > .use_fw_tx_credits = false,
> > .delay_unmap_buffer = true,
> > + .enable_threaded_napi = true,
> > },
> > };
> >
> > diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
> > index 9643031a4427a..adf3076b96503 100644
> > --- a/drivers/net/wireless/ath/ath10k/hw.h
> > +++ b/drivers/net/wireless/ath/ath10k/hw.h
> > @@ -639,6 +639,8 @@ struct ath10k_hw_params {
> > bool use_fw_tx_credits;
> >
> > bool delay_unmap_buffer;
> > +
> > + bool enable_threaded_napi;
> > };
> >
> > struct htt_resp;
> > diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
> > index cfcb759a87dea..b94150fb6ef06 100644
> > --- a/drivers/net/wireless/ath/ath10k/snoc.c
> > +++ b/drivers/net/wireless/ath/ath10k/snoc.c
> > @@ -927,6 +927,9 @@ static int ath10k_snoc_hif_start(struct ath10k *ar)
> >
> > bitmap_clear(ar_snoc->pending_ce_irqs, 0, CE_COUNT_MAX);
> >
> > + if (ar->hw_params.enable_threaded_napi)
> > + dev_set_threaded(&ar->napi_dev, true);
> > +
> > ath10k_core_napi_enable(ar);
> > ath10k_snoc_irq_enable(ar);
> > ath10k_snoc_rx_post(ar);
> > --
> > 2.39.0.314.g84b9a713c41-goog
> >
>
>
> --
> This song goes out to all the folk that thought Stadia would work:
> https://www.linkedin.com/posts/dtaht_the-mushroom-song-activity-6981366665607352320-FXtz
> Dave Täht CEO, TekLibre, LLC
Powered by blists - more mailing lists