| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20221229140155.GA17849@roeck-us.net>
Date: Thu, 29 Dec 2022 06:01:55 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: Saravanan Sekar <saravanan@...umiz.com>
Cc: jdelvare@...e.com, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, marten.lindahl@...s.com,
linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 3/4] hwmon: (pmbus/mpq7932) Add a support for mpq7932
Power Management IC
On Wed, Dec 07, 2022 at 06:37:15PM +0100, Saravanan Sekar wrote:
> The MPQ7932 is a power management IC designed to operate from 5V buses to
> power a variety of Advanced driver-assistance system SOCs. Six integrated
> buck converters with hardware monitoring capability powers a variety of
> target rails configurable over PMBus interface.
>
> Signed-off-by: Saravanan Sekar <saravanan@...umiz.com>
Applied to hwmon-next, after changing multi-line comments.
Guenter
> ---
> drivers/hwmon/pmbus/Kconfig | 16 ++++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/mpq7932.c | 153 ++++++++++++++++++++++++++++++++++
> 3 files changed, 170 insertions(+)
> create mode 100644 drivers/hwmon/pmbus/mpq7932.c
>
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 89668af67206..30448e049486 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -317,6 +317,22 @@ config SENSORS_MP5023
> This driver can also be built as a module. If so, the module will
> be called mp5023.
>
> +config SENSORS_MPQ7932_REGULATOR
> + bool "Regulator support for MPQ7932"
> + depends on SENSORS_MPQ7932 && REGULATOR
> + help
> + If you say yes here you get six integrated buck converter regulator
> + support for power management IC MPS MPQ7932.
> +
> +config SENSORS_MPQ7932
> + tristate "MPS MPQ7932"
> + help
> + If you say yes here you get hardware monitoring functionality support
> + for power management IC MPS MPQ7932.
> +
> + This driver can also be built as a module. If so, the module will
> + be called mpq7932.
> +
> config SENSORS_PIM4328
> tristate "Flex PIM4328 and compatibles"
> help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 0002dbe22d52..d9d2fa4bd6f7 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -34,6 +34,7 @@ obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
> obj-$(CONFIG_SENSORS_MP2888) += mp2888.o
> obj-$(CONFIG_SENSORS_MP2975) += mp2975.o
> obj-$(CONFIG_SENSORS_MP5023) += mp5023.o
> +obj-$(CONFIG_SENSORS_MPQ7932) += mpq7932.o
> obj-$(CONFIG_SENSORS_PLI1209BC) += pli1209bc.o
> obj-$(CONFIG_SENSORS_PM6764TR) += pm6764tr.o
> obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o
> diff --git a/drivers/hwmon/pmbus/mpq7932.c b/drivers/hwmon/pmbus/mpq7932.c
> new file mode 100644
> index 000000000000..1dc1ab71957b
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/mpq7932.c
> @@ -0,0 +1,153 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * mpq7932.c - hwmon with optional regulator driver for mps mpq7932
> + * Copyright 2022 Monolithic Power Systems, Inc
> + *
> + * Author: Saravanan Sekar <saravanan@...umiz.com>
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/pmbus.h>
> +#include "pmbus.h"
> +
> +#define MPQ7932_BUCK_UV_MIN 206250
> +#define MPQ7932_UV_STEP 6250
> +#define MPQ7932_N_VOLTAGES 256
> +#define MPQ7932_VOUT_MAX 0xFF
> +#define MPQ7932_NUM_PAGES 6
> +
> +#define MPQ7932_TON_DELAY 0x60
> +#define MPQ7932_VOUT_STARTUP_SLEW 0xA3
> +#define MPQ7932_VOUT_SHUTDOWN_SLEW 0xA5
> +#define MPQ7932_VOUT_SLEW_MASK GENMASK(1, 0)
> +#define MPQ7932_TON_DELAY_MASK GENMASK(4, 0)
> +
> +struct mpq7932_data {
> + struct pmbus_driver_info info;
> + struct pmbus_platform_data pdata;
> +};
> +
> +#if IS_ENABLED(CONFIG_SENSORS_MPQ7932_REGULATOR)
> +static struct regulator_desc mpq7932_regulators_desc[] = {
> + PMBUS_REGULATOR_STEP("buck", 0, MPQ7932_N_VOLTAGES,
> + MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
> + PMBUS_REGULATOR_STEP("buck", 1, MPQ7932_N_VOLTAGES,
> + MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
> + PMBUS_REGULATOR_STEP("buck", 2, MPQ7932_N_VOLTAGES,
> + MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
> + PMBUS_REGULATOR_STEP("buck", 3, MPQ7932_N_VOLTAGES,
> + MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
> + PMBUS_REGULATOR_STEP("buck", 4, MPQ7932_N_VOLTAGES,
> + MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
> + PMBUS_REGULATOR_STEP("buck", 5, MPQ7932_N_VOLTAGES,
> + MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
> +};
> +#endif
> +
> +static int mpq7932_write_word_data(struct i2c_client *client, int page, int reg,
> + u16 word)
> +{
> + switch (reg) {
> + /* chip support only byte access for VOUT_COMMAND otherwise
> + * results -EREMOTEIO
> + */
/*
* We do not use or accept networking-style multi-line comments in the hwmon
* subsystem.
*/
> + case PMBUS_VOUT_COMMAND:
> + return pmbus_write_byte_data(client, page, reg, word & 0xFF);
> +
> + default:
> + return -ENODATA;
> + }
> +}
> +
> +static int mpq7932_read_word_data(struct i2c_client *client, int page,
> + int phase, int reg)
> +{
> + switch (reg) {
> + /* chip support neither (PMBUS_VOUT_MARGIN_HIGH, PMBUS_VOUT_MARGIN_LOW)
> + * nor (PMBUS_MFR_VOUT_MIN, PMBUS_MFR_VOUT_MAX). As a result set voltage
> + * fails due to error in pmbus_regulator_get_low_margin, so faked.
> + */
> + case PMBUS_MFR_VOUT_MIN:
> + return 0;
> +
> + case PMBUS_MFR_VOUT_MAX:
> + return MPQ7932_VOUT_MAX;
> +
> + /* chip support only byte access for VOUT_COMMAND otherwise
> + * results -EREMOTEIO
> + */
> + case PMBUS_READ_VOUT:
> + return pmbus_read_byte_data(client, page, PMBUS_VOUT_COMMAND);
> +
> + default:
> + return -ENODATA;
> + }
> +}
> +
> +static int mpq7932_probe(struct i2c_client *client)
> +{
> + struct mpq7932_data *data;
> + struct pmbus_driver_info *info;
> + struct device *dev = &client->dev;
> + int i;
> +
> + data = devm_kzalloc(dev, sizeof(struct mpq7932_data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + info = &data->info;
> + info->pages = MPQ7932_NUM_PAGES;
> + info->format[PSC_VOLTAGE_OUT] = direct;
> + info->m[PSC_VOLTAGE_OUT] = 160;
> + info->b[PSC_VOLTAGE_OUT] = -33;
> + for (i = 0; i < info->pages; i++) {
> + info->func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> + | PMBUS_HAVE_STATUS_TEMP;
> + }
> +
> +#if IS_ENABLED(CONFIG_SENSORS_MPQ7932_REGULATOR)
> + info->num_regulators = ARRAY_SIZE(mpq7932_regulators_desc);
> + info->reg_desc = mpq7932_regulators_desc;
> +#endif
> +
> + info->read_word_data = mpq7932_read_word_data;
> + info->write_word_data = mpq7932_write_word_data;
> +
> + data->pdata.flags = PMBUS_NO_CAPABILITY;
> + dev->platform_data = &data->pdata;
> +
> + return pmbus_do_probe(client, info);
> +}
> +
> +static const struct of_device_id mpq7932_of_match[] = {
> + { .compatible = "mps,mpq7932"},
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, mpq7932_of_match);
> +
> +static const struct i2c_device_id mpq7932_id[] = {
> + { "mpq7932", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(i2c, mpq7932_id);
> +
> +static struct i2c_driver mpq7932_regulator_driver = {
> + .driver = {
> + .name = "mpq7932",
> + .of_match_table = mpq7932_of_match,
> + },
> + .probe_new = mpq7932_probe,
> + .id_table = mpq7932_id,
> +};
> +module_i2c_driver(mpq7932_regulator_driver);
> +
> +MODULE_AUTHOR("Saravanan Sekar <saravanan@...umiz.com>");
> +MODULE_DESCRIPTION("MPQ7932 PMIC regulator driver");
> +MODULE_LICENSE("GPL");
> +MODULE_IMPORT_NS(PMBUS);
Powered by blists - more mailing lists