early console in setup code early console in extract_kernel input_data: 0x044f3079 input_len: 0x021fa74f output: 0x01000000 output_len: 0x043615f0 kernel_total_size: 0x05704000 needed_size: 0x05704000 Decompressing Linux... Parsing ELF... done. Booting the kernel. Linux version 6.1.0-rc2-00014-g0af8489b0216 (kbuild@d10e562dce7f) (gcc-11 (Debian 11.3.0-8) 11.3.0, GNU ld (GNU Binutils for Debian) 2.39) #2 SMP Thu Dec 29 14:09:30 CST 2022 KERNEL supported cpus: Intel GenuineIntel Vortex Vortex86 SoC x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. signal: max sigframe size: 1760 BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable e820: remove [mem 0x100000000-0xfffffffffffffffe] usable printk: debug: ignoring loglevel setting. printk: bootconsole [earlyser0] enabled e820: remove [mem 0x100000000-0xfffffffffffffffe] usable Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! user-defined physical RAM map: user: [mem 0x0000000000000000-0x000000000009fbff] usable user: [mem 0x000000000009fc00-0x000000000009ffff] reserved user: [mem 0x00000000000f0000-0x00000000000fffff] reserved user: [mem 0x0000000000100000-0x00000000bffdffff] usable user: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved user: [mem 0x00000000feffc000-0x00000000feffffff] reserved user: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved Hypervisor detected: KVM kvm-clock: Using msrs 4b564d01 and 4b564d00 kvm-clock: using sched offset of 820359527 cycles clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns tsc: Detected 2194.916 MHz processor e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable last_pfn = 0xbffe0 max_arch_pfn = 0x100000 x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC Scan for SMP in [mem 0x00000000-0x000003ff] Scan for SMP in [mem 0x0009fc00-0x0009ffff] Scan for SMP in [mem 0x000f0000-0x000fffff] found SMP MP-table at [mem 0x000f5ba0-0x000f5baf] mpc: f5bb0-f5c80 initial memory mapped: [mem 0x00000000-0x06bfffff] RAMDISK: [mem 0x7a52c000-0x7fffffff] Allocated new RAMDISK: [mem 0x28d2a000-0x2e7fd498] Move RAMDISK from [mem 0x7a52c000-0x7ffff498] to [mem 0x28d2a000-0x2e7fd498] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000F59B0 000014 (v00 BOCHS ) ACPI: RSDT 0x00000000BFFE198D 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: FACP 0x00000000BFFE1839 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: DSDT 0x00000000BFFE0040 0017F9 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: FACS 0x00000000BFFE0000 000040 ACPI: APIC 0x00000000BFFE18AD 000080 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: HPET 0x00000000BFFE192D 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: WAET 0x00000000BFFE1965 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) ACPI: Reserving FACP table memory at [mem 0xbffe1839-0xbffe18ac] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe1838] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f] ACPI: Reserving APIC table memory at [mem 0xbffe18ad-0xbffe192c] ACPI: Reserving HPET table memory at [mem 0xbffe192d-0xbffe1964] ACPI: Reserving WAET table memory at [mem 0xbffe1965-0xbffe198c] mapped APIC to ffffb000 ( fee00000) 2327MB HIGHMEM available. 743MB LOWMEM available. mapped low ram: 0 - 2e7fe000 low ram: 0 - 2e7fe000 Zone ranges: Normal [mem 0x0000000000001000-0x000000002e7fdfff] HighMem [mem 0x000000002e7fe000-0x00000000bffdffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bffdffff] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bffdffff] On node 0, zone Normal: 1 pages in unavailable ranges On node 0, zone Normal: 97 pages in unavailable ranges Using APIC driver default ACPI: PM-Timer IO Port: 0x608 ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f ACPI: Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 TSC deadline timer available smpboot: Allowing 2 CPUs, 0 hotplug CPUs mapped IOAPIC to ffffa000 (fec00000) [mem 0xc0000000-0xfeffbfff] available for PCI devices Booting paravirtualized kernel on KVM clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns setup_percpu: NR_CPUS:8 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 percpu: Embedded 351 pages/cpu s1407324 r0 d30372 u1437696 pcpu-alloc: s1407324 r0 d30372 u1437696 alloc=351*4096 pcpu-alloc: [0] 0 [0] 1 kvm-guest: PV spinlocks disabled, no host support Built 1 zonelists, mobility grouping on. Total pages: 784442 Kernel command line: ip=::::vm-meta-173::dhcp root=/dev/ram0 RESULT_ROOT=/result/rcutorture/300s-default-tasks-tracing/vm-snb/debian-11.1-i386-20220923.cgz/i386-randconfig-a012-20221226/gcc-11/0af8489b0216fa1dd83e264bef8063f2632633d7/19 BOOT_IMAGE=/pkg/linux/i386-randconfig-a012-20221226/gcc-11/0af8489b0216fa1dd83e264bef8063f2632633d7/vmlinuz-6.1.0-rc2-00014-g0af8489b0216 branch=linux-next/master job=/lkp/jobs/scheduled/vm-meta-173/rcutorture-300s-default-tasks-tracing-debian-11.1-i386-20220923.cgz-0af8489b0216fa1dd83e264bef8063f2632633d7-20221231-13940-1j3s4jz-4.yaml user=lkp ARCH=i386 kconfig=i386-randconfig-a012-20221226 commit=0af8489b0216fa1dd83e264bef8063f2632633d7 vmalloc=256M initramfs_async=0 page_owner=on initcall_debug mem=4G nmi_watchdog=0 max_uptime=1200 LKP_SERVER=internal-lkp-server selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oo sysrq: sysrq always enabled. ignoring the deprecated load_ramdisk= option Unknown kernel command line parameters "RESULT_ROOT=/result/rcutorture/300s-default-tasks-tracing/vm-snb/debian-11.1-i386-20220923.cgz/i386-randconfig-a012-20221226/gcc-11/0af8489b0216fa1dd83e264bef8063f2632633d7/19 BOOT_IMAGE=/pkg/linux/i386-randconfig-a012-20221226/gcc-11/0af8489b0216fa1dd83e264bef8063f2632633d7/vmlinuz-6.1.0-rc2-00014-g0af8489b0216 branch=linux-next/master job=/lkp/jobs/scheduled/vm-meta-173/rcutorture-300s-default-tasks-tracing-debian-11.1-i386-20220923.cgz-0af8489b0216fa1dd83e264bef8063f2632633d7-20221231-13940-1j3s4jz-4.yaml user=lkp ARCH=i386 kconfig=i386-randconfig-a012-20221226 commit=0af8489b0216fa1dd83e264bef8063f2632633d7 max_uptime=1200 LKP_SERVER=internal-lkp-server selinux=0 softlockup_panic=1 prompt_ramdisk=0 vga=normal", will be passed to user space. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) allocated 47245380 bytes of page_ext mem auto-init: stack:byref_all(zero), heap alloc:off, heap free:off stackdepot hash table entries: 65536 (order: 6, 262144 bytes, linear) Initializing HighMem for node 0 (0002e7fe:000bffe0) Initializing Movable for node 0 (00000000:00000000) Checking if this processor honours the WP bit even in supervisor mode...Ok. Memory: 2882744K/3145208K available (40135K kernel code, 10445K rwdata, 15300K rodata, 2904K init, 19000K bss, 262464K reserved, 0K cma-reserved, 2383752K highmem) SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=2, Nodes=1 Node 0, zone Normal: page owner found early allocated 10 pages Node 0, zone HighMem: page owner found early allocated 0 pages trace event string verifier disabled Running RCU self tests rcu: Hierarchical RCU implementation. rcu: RCU lockdep checking is enabled. rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout). Trampoline variant of Tasks RCU enabled. Rude variant of Tasks RCU enabled. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 2304, nr_irqs: 56, preallocated irqs: 16 rcu: srcu_init: Setting srcu_struct sizes based on contention. calling hvc_console_init+0x0/0x4a @ 0 initcall hvc_console_init+0x0/0x4a returned 0 after 0 usecs calling univ8250_console_init+0x0/0x8b @ 0 printk: console [ttyS0] enabled printk: bootconsole [earlyser0] disabled initcall univ8250_console_init+0x0/0x8b returned 0 after 0 usecs calling altera_jtaguart_console_init+0x0/0x4a @ 0 initcall altera_jtaguart_console_init+0x0/0x4a returned 0 after 0 usecs Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8192 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 32768 ... MAX_LOCKDEP_CHAINS: 65536 ... CHAINHASH_SIZE: 32768 memory used by lock dependency info: 4061 kB memory used for stack traces: 2112 kB per task-struct memory footprint: 2112 bytes ACPI: Core revision 20220331 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns APIC: Switch to symmetric I/O mode setup Enabling APIC mode: Flat. Using 1 I/O APICs masked ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs apic 0 pin 0 not connected IOAPIC[0]: Preconfigured routing entry (0-1 -> IRQ 1 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-2 -> IRQ 0 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-3 -> IRQ 3 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-4 -> IRQ 4 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-5 -> IRQ 5 Level:1 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-6 -> IRQ 6 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-7 -> IRQ 7 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-8 -> IRQ 8 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-9 -> IRQ 9 Level:1 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-10 -> IRQ 10 Level:1 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-11 -> IRQ 11 Level:1 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-12 -> IRQ 12 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-13 -> IRQ 13 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-14 -> IRQ 14 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (0-15 -> IRQ 15 Level:0 ActiveLow:0) apic 0 pin 16 not connected apic 0 pin 17 not connected apic 0 pin 18 not connected apic 0 pin 19 not connected apic 0 pin 20 not connected apic 0 pin 21 not connected apic 0 pin 22 not connected apic 0 pin 23 not connected ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa3704c1a9, max_idle_ns: 440795296692 ns Calibrating delay loop (skipped) preset value.. 4389.83 BogoMIPS (lpj=2194916) pid_max: default: 32768 minimum: 301 LSM: Security Framework initializing landlock: Up and running. LoadPin: ready to pin (currently not enforcing) Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization Spectre V2 : Kernel not compiled with retpoline; no mitigation available! Spectre V2 : Vulnerable Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch Speculative Store Bypass: Vulnerable L1TF: Kernel not compiled for PAE. No mitigation for L1TF MDS: Vulnerable: Clear CPU buffers attempted, no microcode MMIO Stale Data: Unknown: No mitigations Freeing SMP alternatives memory: 40K smpboot: CPU0: Intel Xeon E312xx (Sandy Bridge) (family: 0x6, model: 0x2a, stepping: 0x1) cblist_init_generic: Setting adjustable number of callback queues. cblist_init_generic: Setting shift to 1 and lim to 1. cblist_init_generic: Setting shift to 1 and lim to 1. cblist_init_generic: Setting shift to 1 and lim to 1. Running RCU-tasks wait API self tests calling init_hw_perf_events+0x0/0xa30 @ 1 Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. initcall init_hw_perf_events+0x0/0xa30 returned 0 after 1000 usecs calling init_real_mode+0x0/0x114 @ 1 initcall init_real_mode+0x0/0x114 returned 0 after 0 usecs calling trace_init_perf_perm_irq_work_exit+0x0/0x38 @ 1 initcall trace_init_perf_perm_irq_work_exit+0x0/0x38 returned 0 after 0 usecs calling bp_init_aperfmperf+0x0/0x77 @ 1 initcall bp_init_aperfmperf+0x0/0x77 returned 0 after 0 usecs calling validate_x2apic+0x0/0x13a @ 1 initcall validate_x2apic+0x0/0x13a returned 0 after 0 usecs calling register_nmi_cpu_backtrace_handler+0x0/0x4c @ 1 initcall register_nmi_cpu_backtrace_handler+0x0/0x4c returned 0 after 0 usecs calling kvm_setup_vsyscall_timeinfo+0x0/0xc5 @ 1 initcall kvm_setup_vsyscall_timeinfo+0x0/0xc5 returned 0 after 0 usecs calling spawn_ksoftirqd+0x0/0xa6 @ 1 initcall spawn_ksoftirqd+0x0/0xa6 returned 0 after 1000 usecs calling migration_init+0x0/0x4b @ 1 initcall migration_init+0x0/0x4b returned 0 after 0 usecs calling srcu_bootup_announce+0x0/0x13b @ 1 rcu: Hierarchical SRCU implementation. rcu: Max phase no-delay instances is 400. initcall srcu_bootup_announce+0x0/0x13b returned 0 after 1000 usecs calling rcu_spawn_gp_kthread+0x0/0x301 @ 1 initcall rcu_spawn_gp_kthread+0x0/0x301 returned 0 after 1000 usecs calling check_cpu_stall_init+0x0/0x4f @ 1 initcall check_cpu_stall_init+0x0/0x4f returned 0 after 0 usecs calling rcu_sysrq_init+0x0/0x73 @ 1 initcall rcu_sysrq_init+0x0/0x73 returned 0 after 0 usecs calling trace_init_flags_sys_enter+0x0/0x35 @ 1 initcall trace_init_flags_sys_enter+0x0/0x35 returned 0 after 0 usecs calling trace_init_flags_sys_exit+0x0/0x35 @ 1 initcall trace_init_flags_sys_exit+0x0/0x35 returned 0 after 0 usecs calling cpu_stop_init+0x0/0x16d @ 1 Callback from call_rcu_tasks_trace() invoked. initcall cpu_stop_init+0x0/0x16d returned 0 after 1000 usecs calling init_kprobes+0x0/0x273 @ 1 initcall init_kprobes+0x0/0x273 returned 0 after 1000 usecs calling init_events+0x0/0x16a @ 1 initcall init_events+0x0/0x16a returned 0 after 0 usecs calling init_trace_printk+0x0/0x49 @ 1 initcall init_trace_printk+0x0/0x49 returned 0 after 0 usecs calling event_trace_enable_again+0x0/0x86 @ 1 initcall event_trace_enable_again+0x0/0x86 returned 0 after 0 usecs calling irq_work_init_threads+0x0/0x2e @ 1 initcall irq_work_init_threads+0x0/0x2e returned 0 after 0 usecs calling jump_label_init_module+0x0/0x49 @ 1 initcall jump_label_init_module+0x0/0x49 returned 0 after 0 usecs calling init_zero_pfn+0x0/0x4b @ 1 initcall init_zero_pfn+0x0/0x4b returned 0 after 0 usecs calling init_fs_inode_sysctls+0x0/0x54 @ 1 initcall init_fs_inode_sysctls+0x0/0x54 returned 0 after 0 usecs calling init_fs_locks_sysctls+0x0/0x54 @ 1 initcall init_fs_locks_sysctls+0x0/0x54 returned 0 after 0 usecs calling dynamic_debug_init+0x0/0x3c7 @ 1 initcall dynamic_debug_init+0x0/0x3c7 returned 0 after 4000 usecs NMI watchdog: Perf NMI watchdog permanently disabled smp: Bringing up secondary CPUs ... x86: Booting SMP configuration: .... node #0, CPUs: #1 masked ExtINT on CPU#1 smp: Brought up 1 node, 2 CPUs smpboot: Max logical packages: 1 smpboot: Total of 2 processors activated (8779.66 BogoMIPS) devtmpfs: initialized version magic: 0x4231332a calling ipc_ns_init+0x0/0x7c @ 1 initcall ipc_ns_init+0x0/0x7c returned 0 after 0 usecs calling init_mmap_min_addr+0x0/0x3a @ 1 initcall init_mmap_min_addr+0x0/0x3a returned 0 after 0 usecs calling pci_realloc_setup_params+0x0/0xa5 @ 1 initcall pci_realloc_setup_params+0x0/0xa5 returned 0 after 0 usecs calling inet_frag_wq_init+0x0/0x7f @ 1 initcall inet_frag_wq_init+0x0/0x7f returned 0 after 1000 usecs calling e820__register_nvs_regions+0x0/0xad @ 1 initcall e820__register_nvs_regions+0x0/0xad returned 0 after 0 usecs calling cpufreq_register_tsc_scaling+0x0/0x98 @ 1 initcall cpufreq_register_tsc_scaling+0x0/0x98 returned 0 after 0 usecs calling reboot_init+0x0/0x2e @ 1 initcall reboot_init+0x0/0x2e returned 0 after 0 usecs calling wq_sysfs_init+0x0/0x8b @ 1 initcall wq_sysfs_init+0x0/0x8b returned 0 after 0 usecs calling ksysfs_init+0x0/0x16c @ 1 initcall ksysfs_init+0x0/0x16c returned 0 after 0 usecs calling schedutil_gov_init+0x0/0x49 @ 1 initcall schedutil_gov_init+0x0/0x49 returned 0 after 0 usecs calling rcu_set_runtime_mode+0x0/0x9b @ 1 initcall rcu_set_runtime_mode+0x0/0x9b returned 0 after 0 usecs calling init_jiffies_clocksource+0x0/0x50 @ 1 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns initcall init_jiffies_clocksource+0x0/0x50 returned 0 after 1000 usecs calling futex_init+0x0/0x1df @ 1 futex hash table entries: 512 (order: 3, 32768 bytes, linear) initcall futex_init+0x0/0x1df returned 0 after 1000 usecs calling cgroup_wq_init+0x0/0x8a @ 1 initcall cgroup_wq_init+0x0/0x8a returned 0 after 0 usecs calling cgroup1_wq_init+0x0/0x87 @ 1 initcall cgroup1_wq_init+0x0/0x87 returned 0 after 0 usecs calling trace_events_eprobe_init_early+0x0/0x8d @ 1 initcall trace_events_eprobe_init_early+0x0/0x8d returned 0 after 0 usecs calling init_kprobe_trace_early+0x0/0xac @ 1 initcall init_kprobe_trace_early+0x0/0xac returned 0 after 0 usecs calling memory_failure_init+0x0/0x183 @ 1 initcall memory_failure_init+0x0/0x183 returned 0 after 0 usecs calling cma_init_reserved_areas+0x0/0xa4 @ 1 initcall cma_init_reserved_areas+0x0/0xa4 returned 0 after 0 usecs calling fsnotify_init+0x0/0xa3 @ 1 initcall fsnotify_init+0x0/0xa3 returned 0 after 0 usecs calling filelock_init+0x0/0x17f @ 1 initcall filelock_init+0x0/0x17f returned 0 after 0 usecs calling init_script_binfmt+0x0/0x4c @ 1 initcall init_script_binfmt+0x0/0x4c returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x4c @ 1 initcall init_elf_binfmt+0x0/0x4c returned 0 after 0 usecs calling configfs_init+0x0/0x160 @ 1 initcall configfs_init+0x0/0x160 returned 0 after 0 usecs calling debugfs_init+0x0/0xfc @ 1 initcall debugfs_init+0x0/0xfc returned -1 after 0 usecs calling tracefs_init+0x0/0xb6 @ 1 initcall tracefs_init+0x0/0xb6 returned 0 after 0 usecs calling pinctrl_init+0x0/0x5f @ 1 pinctrl core: initialized pinctrl subsystem pinctrl core: failed to create debugfs directory initcall pinctrl_init+0x0/0x5f returned 0 after 1000 usecs calling gpiolib_dev_init+0x0/0x249 @ 1 initcall gpiolib_dev_init+0x0/0x249 returned 0 after 0 usecs calling virtio_init+0x0/0x40 @ 1 Callback from call_rcu_tasks_rude() invoked. initcall virtio_init+0x0/0x40 returned 0 after 2000 usecs calling regulator_init+0x0/0x130 @ 1 regulator-dummy: no parameters, enabled initcall regulator_init+0x0/0x130 returned 0 after 1000 usecs calling iommu_init+0x0/0x89 @ 1 initcall iommu_init+0x0/0x89 returned 0 after 0 usecs calling component_debug_init+0x0/0x51 @ 1 initcall component_debug_init+0x0/0x51 returned 0 after 0 usecs calling opp_debug_init+0x0/0x51 @ 1 initcall opp_debug_init+0x0/0x51 returned 0 after 0 usecs calling cpufreq_core_init+0x0/0x15c @ 1 initcall cpufreq_core_init+0x0/0x15c returned 0 after 0 usecs calling cpufreq_gov_performance_init+0x0/0x49 @ 1 initcall cpufreq_gov_performance_init+0x0/0x49 returned 0 after 0 usecs calling cpufreq_gov_powersave_init+0x0/0x49 @ 1 initcall cpufreq_gov_powersave_init+0x0/0x49 returned 0 after 0 usecs calling cpufreq_gov_userspace_init+0x0/0x49 @ 1 initcall cpufreq_gov_userspace_init+0x0/0x49 returned 0 after 0 usecs calling CPU_FREQ_GOV_ONDEMAND_init+0x0/0x49 @ 1 initcall CPU_FREQ_GOV_ONDEMAND_init+0x0/0x49 returned 0 after 0 usecs calling cpufreq_dt_platdev_init+0x0/0x292 @ 1 initcall cpufreq_dt_platdev_init+0x0/0x292 returned -19 after 0 usecs calling cpuidle_init+0x0/0x76 @ 1 initcall cpuidle_init+0x0/0x76 returned 0 after 0 usecs calling sock_init+0x0/0x191 @ 1 initcall sock_init+0x0/0x191 returned 0 after 0 usecs calling net_inuse_init+0x0/0x6b @ 1 initcall net_inuse_init+0x0/0x6b returned 0 after 0 usecs calling net_defaults_init+0x0/0x6b @ 1 initcall net_defaults_init+0x0/0x6b returned 0 after 0 usecs calling init_default_flow_dissectors+0x0/0x98 @ 1 initcall init_default_flow_dissectors+0x0/0x98 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x29c @ 1 NET: Registered PF_NETLINK/PF_ROUTE protocol family initcall netlink_proto_init+0x0/0x29c returned 0 after 2000 usecs calling genl_init+0x0/0x9e @ 1 initcall genl_init+0x0/0x9e returned 0 after 0 usecs calling olpc_init+0x0/0x32b @ 1 initcall olpc_init+0x0/0x32b returned 0 after 0 usecs calling pi_init+0x0/0xb4 @ 1 initcall pi_init+0x0/0xb4 returned 0 after 0 usecs calling irq_sysfs_init+0x0/0x164 @ 1 initcall irq_sysfs_init+0x0/0x164 returned 0 after 1000 usecs calling release_early_probes+0x0/0x81 @ 1 initcall release_early_probes+0x0/0x81 returned 0 after 0 usecs calling bdi_class_init+0x0/0xbf @ 1 initcall bdi_class_init+0x0/0xbf returned 0 after 0 usecs calling mm_sysfs_init+0x0/0x7e @ 1 initcall mm_sysfs_init+0x0/0x7e returned 0 after 0 usecs calling init_per_zone_wmark_min+0x0/0x7e @ 1 initcall init_per_zone_wmark_min+0x0/0x7e returned 0 after 0 usecs calling mpi_init+0x0/0x108 @ 1 initcall mpi_init+0x0/0x108 returned 0 after 0 usecs calling mhi_init+0x0/0x5c @ 1 initcall mhi_init+0x0/0x5c returned 0 after 0 usecs calling mhi_ep_init+0x0/0x49 @ 1 initcall mhi_ep_init+0x0/0x49 returned 0 after 0 usecs calling gpiolib_sysfs_init+0x0/0x162 @ 1 initcall gpiolib_sysfs_init+0x0/0x162 returned 0 after 0 usecs calling acpi_gpio_setup_params+0x0/0x5e @ 1 initcall acpi_gpio_setup_params+0x0/0x5e returned 0 after 0 usecs calling pcibus_class_init+0x0/0x4e @ 1 initcall pcibus_class_init+0x0/0x4e returned 0 after 0 usecs calling pci_driver_init+0x0/0x6c @ 1 initcall pci_driver_init+0x0/0x6c returned 0 after 0 usecs calling lcd_class_init+0x0/0xa6 @ 1 initcall lcd_class_init+0x0/0xa6 returned 0 after 0 usecs calling backlight_class_init+0x0/0x112 @ 1 initcall backlight_class_init+0x0/0x112 returned 0 after 0 usecs calling tty_class_init+0x0/0x84 @ 1 initcall tty_class_init+0x0/0x84 returned 0 after 0 usecs calling iommu_dev_init+0x0/0x4e @ 1 initcall iommu_dev_init+0x0/0x4e returned 0 after 0 usecs calling mipi_dsi_bus_init+0x0/0x49 @ 1 initcall mipi_dsi_bus_init+0x0/0x49 returned 0 after 0 usecs calling devlink_class_init+0x0/0xc5 @ 1 initcall devlink_class_init+0x0/0xc5 returned 0 after 0 usecs calling software_node_init+0x0/0x80 @ 1 initcall software_node_init+0x0/0x80 returned 0 after 0 usecs calling isa_bus_init+0x0/0xc0 @ 1 initcall isa_bus_init+0x0/0xc0 returned 0 after 0 usecs calling regmap_initcall+0x0/0x45 @ 1 initcall regmap_initcall+0x0/0x45 returned 0 after 0 usecs calling sram_init+0x0/0x4b @ 1 initcall sram_init+0x0/0x4b returned 0 after 0 usecs calling syscon_init+0x0/0x4b @ 1 initcall syscon_init+0x0/0x4b returned 0 after 0 usecs calling spi_init+0x0/0x187 @ 1 initcall spi_init+0x0/0x187 returned 0 after 0 usecs calling spmi_init+0x0/0x73 @ 1 initcall spmi_init+0x0/0x73 returned 0 after 0 usecs calling spmi_controller_init+0x0/0x4b @ 1 initcall spmi_controller_init+0x0/0x4b returned 0 after 0 usecs calling hsi_init+0x0/0x49 @ 1 initcall hsi_init+0x0/0x49 returned 0 after 0 usecs calling i2c_init+0x0/0x193 @ 1 initcall i2c_init+0x0/0x193 returned 0 after 0 usecs calling thermal_init+0x0/0x176 @ 1 thermal_sys: Registered thermal governor 'step_wise' thermal_sys: Registered thermal governor 'user_space' initcall thermal_init+0x0/0x176 returned 0 after 1000 usecs calling init_ladder+0x0/0x53 @ 1 cpuidle: using governor ladder initcall init_ladder+0x0/0x53 returned 0 after 1000 usecs calling rpmsg_init+0x0/0x119 @ 1 initcall rpmsg_init+0x0/0x119 returned 0 after 0 usecs calling rpmsg_ns_init+0x0/0x50 @ 1 initcall rpmsg_ns_init+0x0/0x50 returned 0 after 0 usecs calling fsi_init+0x0/0x132 @ 1 initcall fsi_init+0x0/0x132 returned 0 after 0 usecs calling kobject_uevent_init+0x0/0x49 @ 1 initcall kobject_uevent_init+0x0/0x49 returned 0 after 0 usecs calling bts_init+0x0/0x13e @ 1 initcall bts_init+0x0/0x13e returned -19 after 0 usecs calling pt_init+0x0/0x389 @ 1 initcall pt_init+0x0/0x389 returned -19 after 0 usecs calling boot_params_ksysfs_init+0x0/0x11e @ 1 initcall boot_params_ksysfs_init+0x0/0x11e returned 0 after 0 usecs calling sbf_init+0x0/0x24f @ 1 initcall sbf_init+0x0/0x24f returned 0 after 0 usecs calling arch_kdebugfs_init+0x0/0x51 @ 1 initcall arch_kdebugfs_init+0x0/0x51 returned 0 after 0 usecs calling init_pit_clocksource+0x0/0xe1 @ 1 initcall init_pit_clocksource+0x0/0xe1 returned 0 after 0 usecs calling intel_pconfig_init+0x0/0x1e1 @ 1 initcall intel_pconfig_init+0x0/0x1e1 returned 0 after 0 usecs calling activate_jump_labels+0x0/0xb1 @ 1 initcall activate_jump_labels+0x0/0xb1 returned 0 after 0 usecs calling ffh_cstate_init+0x0/0xa4 @ 1 initcall ffh_cstate_init+0x0/0xa4 returned 0 after 0 usecs calling kvm_alloc_cpumask+0x0/0x1a6 @ 1 initcall kvm_alloc_cpumask+0x0/0x1a6 returned 0 after 0 usecs calling activate_jump_labels+0x0/0xb3 @ 1 initcall activate_jump_labels+0x0/0xb3 returned 0 after 0 usecs calling kcmp_cookies_init+0x0/0xe1 @ 1 initcall kcmp_cookies_init+0x0/0xe1 returned 0 after 0 usecs calling cryptomgr_init+0x0/0x49 @ 1 initcall cryptomgr_init+0x0/0x49 returned 0 after 0 usecs calling acpi_pci_init+0x0/0xb6 @ 1 initcall acpi_pci_init+0x0/0xb6 returned 0 after 0 usecs calling cdns_uart_init+0x0/0x4b @ 1 initcall cdns_uart_init+0x0/0x4b returned 0 after 0 usecs calling olpc_ec_init_module+0x0/0x4b @ 1 initcall olpc_ec_init_module+0x0/0x4b returned 0 after 0 usecs calling pci_arch_init+0x0/0x19c @ 1 PCI: PCI BIOS revision 2.10 entry at 0xfd1ca, last bus=0 PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x19c returned 0 after 2000 usecs calling of_platform_default_populate_init+0x0/0x1a3 @ 1 initcall of_platform_default_populate_init+0x0/0x1a3 returned -19 after 0 usecs calling fixup_ht_bug+0x0/0x1ce @ 1 initcall fixup_ht_bug+0x0/0x1ce returned 0 after 0 usecs calling topology_init+0x0/0xb1 @ 1 initcall topology_init+0x0/0xb1 returned 0 after 1000 usecs calling uid_cache_init+0x0/0x144 @ 1 initcall uid_cache_init+0x0/0x144 returned 0 after 0 usecs calling param_sysfs_init+0x0/0x1cb @ 1 initcall param_sysfs_init+0x0/0x1cb returned 0 after 91000 usecs calling user_namespace_sysctl_init+0x0/0x19a @ 1 initcall user_namespace_sysctl_init+0x0/0x19a returned 0 after 0 usecs calling proc_schedstat_init+0x0/0x59 @ 1 initcall proc_schedstat_init+0x0/0x59 returned 0 after 0 usecs calling pm_sysrq_init+0x0/0x4f @ 1 initcall pm_sysrq_init+0x0/0x4f returned 0 after 0 usecs calling create_proc_profile+0x0/0x190 @ 1 initcall create_proc_profile+0x0/0x190 returned 0 after 0 usecs calling crash_save_vmcoreinfo_init+0x0/0x977 @ 1 initcall crash_save_vmcoreinfo_init+0x0/0x977 returned 0 after 0 usecs calling crash_notes_memory_init+0x0/0x98 @ 1 initcall crash_notes_memory_init+0x0/0x98 returned 0 after 0 usecs calling cgroup_sysfs_init+0x0/0x4e @ 1 initcall cgroup_sysfs_init+0x0/0x4e returned 0 after 0 usecs calling cgroup_namespaces_init+0x0/0x2e @ 1 initcall cgroup_namespaces_init+0x0/0x2e returned 0 after 0 usecs calling init_optprobes+0x0/0x73 @ 1 kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. initcall init_optprobes+0x0/0x73 returned 0 after 1000 usecs calling hung_task_init+0x0/0xf7 @ 1 initcall hung_task_init+0x0/0xf7 returned 0 after 0 usecs calling trace_eval_init+0x0/0x123 @ 1 initcall trace_eval_init+0x0/0x123 returned 0 after 0 usecs calling oom_init+0x0/0xb3 @ 1 initcall oom_init+0x0/0xb3 returned 0 after 1000 usecs calling default_bdi_init+0x0/0x81 @ 1 initcall default_bdi_init+0x0/0x81 returned 0 after 0 usecs calling percpu_enable_async+0x0/0x35 @ 1 initcall percpu_enable_async+0x0/0x35 returned 0 after 0 usecs calling init_user_reserve+0x0/0x40 @ 1 initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs calling init_admin_reserve+0x0/0x40 @ 1 initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs calling init_reserve_notifier+0x0/0x2e @ 1 initcall init_reserve_notifier+0x0/0x2e returned 0 after 0 usecs calling swap_init_sysfs+0x0/0xff @ 1 initcall swap_init_sysfs+0x0/0xff returned 0 after 0 usecs calling swapfile_init+0x0/0xe3 @ 1 initcall swapfile_init+0x0/0xe3 returned 0 after 0 usecs calling hugetlb_init+0x0/0x768 @ 1 HugeTLB: registered 4.00 MiB page size, pre-allocated 0 pages HugeTLB: 0 KiB vmemmap can be freed for a 4.00 MiB page initcall hugetlb_init+0x0/0x768 returned 0 after 1000 usecs calling ksm_init+0x0/0x20a @ 1 initcall ksm_init+0x0/0x20a returned 0 after 1000 usecs calling mem_cgroup_init+0x0/0x28c @ 1 initcall mem_cgroup_init+0x0/0x28c returned 0 after 0 usecs calling mem_cgroup_swap_init+0x0/0x10e @ 1 Callback from call_rcu_tasks() invoked. initcall mem_cgroup_swap_init+0x0/0x10e returned 0 after 1000 usecs calling page_idle_init+0x0/0x92 @ 1 initcall page_idle_init+0x0/0x92 returned 0 after 0 usecs calling seqiv_module_init+0x0/0x49 @ 1 initcall seqiv_module_init+0x0/0x49 returned 0 after 0 usecs calling dh_init+0x0/0xc2 @ 1 initcall dh_init+0x0/0xc2 returned 0 after 0 usecs calling rsa_init+0x0/0xc0 @ 1 initcall rsa_init+0x0/0xc0 returned 0 after 0 usecs calling ecdsa_init+0x0/0x121 @ 1 initcall ecdsa_init+0x0/0x121 returned 0 after 0 usecs calling hmac_module_init+0x0/0x49 @ 1 initcall hmac_module_init+0x0/0x49 returned 0 after 0 usecs calling crypto_xcbc_module_init+0x0/0x49 @ 1 initcall crypto_xcbc_module_init+0x0/0x49 returned 0 after 0 usecs calling crypto_null_mod_init+0x0/0x124 @ 1 initcall crypto_null_mod_init+0x0/0x124 returned 0 after 0 usecs calling md4_mod_init+0x0/0x49 @ 1 initcall md4_mod_init+0x0/0x49 returned 0 after 0 usecs calling md5_mod_init+0x0/0x49 @ 1 initcall md5_mod_init+0x0/0x49 returned 0 after 0 usecs calling rmd160_mod_init+0x0/0x49 @ 1 initcall rmd160_mod_init+0x0/0x49 returned 0 after 0 usecs calling sha1_generic_mod_init+0x0/0x49 @ 1 initcall sha1_generic_mod_init+0x0/0x49 returned 0 after 0 usecs calling sha256_generic_mod_init+0x0/0x4e @ 1 initcall sha256_generic_mod_init+0x0/0x4e returned 0 after 0 usecs calling sha512_generic_mod_init+0x0/0x4e @ 1 initcall sha512_generic_mod_init+0x0/0x4e returned 0 after 0 usecs calling sm3_generic_mod_init+0x0/0x49 @ 1 initcall sm3_generic_mod_init+0x0/0x49 returned 0 after 0 usecs calling wp512_mod_init+0x0/0x4e @ 1 initcall wp512_mod_init+0x0/0x4e returned 0 after 0 usecs calling blake2b_mod_init+0x0/0x4e @ 1 initcall blake2b_mod_init+0x0/0x4e returned 0 after 0 usecs calling crypto_ecb_module_init+0x0/0x49 @ 1 initcall crypto_ecb_module_init+0x0/0x49 returned 0 after 0 usecs calling crypto_cbc_module_init+0x0/0x49 @ 1 initcall crypto_cbc_module_init+0x0/0x49 returned 0 after 0 usecs calling crypto_cfb_module_init+0x0/0x49 @ 1 initcall crypto_cfb_module_init+0x0/0x49 returned 0 after 0 usecs calling crypto_ctr_module_init+0x0/0x4e @ 1 initcall crypto_ctr_module_init+0x0/0x4e returned 0 after 0 usecs calling crypto_xctr_module_init+0x0/0x49 @ 1 initcall crypto_xctr_module_init+0x0/0x49 returned 0 after 0 usecs calling hctr2_module_init+0x0/0x4e @ 1 initcall hctr2_module_init+0x0/0x4e returned 0 after 0 usecs calling crypto_kw_init+0x0/0x49 @ 1 initcall crypto_kw_init+0x0/0x49 returned 0 after 0 usecs calling crypto_gcm_module_init+0x0/0xf1 @ 1 initcall crypto_gcm_module_init+0x0/0xf1 returned 0 after 0 usecs calling crypto_ccm_module_init+0x0/0x4e @ 1 initcall crypto_ccm_module_init+0x0/0x4e returned 0 after 0 usecs calling crypto_aegis128_module_init+0x0/0x6c @ 1 initcall crypto_aegis128_module_init+0x0/0x6c returned 0 after 0 usecs calling pcrypt_init+0x0/0x151 @ 1 initcall pcrypt_init+0x0/0x151 returned 0 after 1000 usecs calling cryptd_init+0x0/0x124 @ 1 cryptd: max_cpu_qlen set to 1000 initcall cryptd_init+0x0/0x124 returned 0 after 1000 usecs calling fcrypt_mod_init+0x0/0x49 @ 1 initcall fcrypt_mod_init+0x0/0x49 returned 0 after 0 usecs calling blowfish_mod_init+0x0/0x49 @ 1 initcall blowfish_mod_init+0x0/0x49 returned 0 after 0 usecs calling twofish_mod_init+0x0/0x49 @ 1 initcall twofish_mod_init+0x0/0x49 returned 0 after 0 usecs calling serpent_mod_init+0x0/0x49 @ 1 initcall serpent_mod_init+0x0/0x49 returned 0 after 0 usecs calling aes_init+0x0/0x49 @ 1 initcall aes_init+0x0/0x49 returned 0 after 0 usecs calling sm4_init+0x0/0x49 @ 1 initcall sm4_init+0x0/0x49 returned 0 after 0 usecs calling camellia_init+0x0/0x49 @ 1 initcall camellia_init+0x0/0x49 returned 0 after 0 usecs calling cast6_mod_init+0x0/0x49 @ 1 initcall cast6_mod_init+0x0/0x49 returned 0 after 0 usecs calling chacha_generic_mod_init+0x0/0x4e @ 1 initcall chacha_generic_mod_init+0x0/0x4e returned 0 after 0 usecs calling deflate_mod_init+0x0/0xc5 @ 1 initcall deflate_mod_init+0x0/0xc5 returned 0 after 0 usecs calling michael_mic_init+0x0/0x49 @ 1 initcall michael_mic_init+0x0/0x49 returned 0 after 0 usecs calling crc32c_mod_init+0x0/0x49 @ 1 initcall crc32c_mod_init+0x0/0x49 returned 0 after 0 usecs calling crc32_mod_init+0x0/0x49 @ 1 initcall crc32_mod_init+0x0/0x49 returned 0 after 0 usecs calling crct10dif_mod_init+0x0/0x49 @ 1 initcall crct10dif_mod_init+0x0/0x49 returned 0 after 0 usecs calling crypto_authenc_module_init+0x0/0x49 @ 1 initcall crypto_authenc_module_init+0x0/0x49 returned 0 after 0 usecs calling crypto_authenc_esn_module_init+0x0/0x49 @ 1 initcall crypto_authenc_esn_module_init+0x0/0x49 returned 0 after 0 usecs calling lzo_mod_init+0x0/0xc0 @ 1 initcall lzo_mod_init+0x0/0xc0 returned 0 after 0 usecs calling lzorle_mod_init+0x0/0xbf @ 1 initcall lzorle_mod_init+0x0/0xbf returned 0 after 0 usecs calling lz4hc_mod_init+0x0/0xbf @ 1 initcall lz4hc_mod_init+0x0/0xbf returned 0 after 0 usecs calling xxhash_mod_init+0x0/0x49 @ 1 initcall xxhash_mod_init+0x0/0x49 returned 0 after 0 usecs calling prng_mod_init+0x0/0x4e @ 1 initcall prng_mod_init+0x0/0x4e returned 0 after 0 usecs calling drbg_init+0x0/0x1a7 @ 1 initcall drbg_init+0x0/0x1a7 returned 0 after 0 usecs calling ghash_mod_init+0x0/0x49 @ 1 initcall ghash_mod_init+0x0/0x49 returned 0 after 0 usecs calling polyval_mod_init+0x0/0x49 @ 1 initcall polyval_mod_init+0x0/0x49 returned 0 after 0 usecs calling zstd_mod_init+0x0/0xc0 @ 1 initcall zstd_mod_init+0x0/0xc0 returned 0 after 0 usecs calling crypto_ofb_module_init+0x0/0x49 @ 1 initcall crypto_ofb_module_init+0x0/0x49 returned 0 after 0 usecs calling essiv_module_init+0x0/0x49 @ 1 initcall essiv_module_init+0x0/0x49 returned 0 after 0 usecs calling curve25519_init+0x0/0x49 @ 1 initcall curve25519_init+0x0/0x49 returned 0 after 0 usecs calling ecdh_init+0x0/0x121 @ 1 initcall ecdh_init+0x0/0x121 returned 0 after 0 usecs calling init_bio+0x0/0xf8 @ 1 initcall init_bio+0x0/0xf8 returned 0 after 0 usecs calling blk_ioc_init+0x0/0x5f @ 1 initcall blk_ioc_init+0x0/0x5f returned 0 after 0 usecs calling blk_mq_init+0x0/0x15d @ 1 initcall blk_mq_init+0x0/0x15d returned 0 after 0 usecs calling genhd_device_init+0x0/0xd1 @ 1 initcall genhd_device_init+0x0/0xd1 returned 0 after 1000 usecs calling io_wq_init+0x0/0x8b @ 1 initcall io_wq_init+0x0/0x8b returned 0 after 0 usecs calling sg_pool_init+0x0/0x1ae @ 1 initcall sg_pool_init+0x0/0x1ae returned 0 after 0 usecs calling irq_poll_setup+0x0/0x129 @ 1 initcall irq_poll_setup+0x0/0x129 returned 0 after 0 usecs calling mcp23s08_i2c_init+0x0/0x4b @ 1 initcall mcp23s08_i2c_init+0x0/0x4b returned 0 after 0 usecs calling mcp23s08_spi_init+0x0/0x4b @ 1 initcall mcp23s08_spi_init+0x0/0x4b returned 0 after 0 usecs calling sx150x_init+0x0/0x4b @ 1 initcall sx150x_init+0x0/0x4b returned 0 after 0 usecs calling gpiolib_debugfs_init+0x0/0x5a @ 1 initcall gpiolib_debugfs_init+0x0/0x5a returned 0 after 0 usecs calling altera_gpio_init+0x0/0x4b @ 1 initcall altera_gpio_init+0x0/0x4b returned 0 after 0 usecs calling da9055_gpio_init+0x0/0x4b @ 1 initcall da9055_gpio_init+0x0/0x4b returned 0 after 0 usecs calling f7188x_gpio_init+0x0/0x16c @ 1 gpio-f7188x: Unsupported Fintek device 0xffff gpio-f7188x: Unsupported Fintek device 0xffff initcall f7188x_gpio_init+0x0/0x16c returned -19 after 1000 usecs calling max7300_init+0x0/0x4b @ 1 initcall max7300_init+0x0/0x4b returned 0 after 0 usecs calling max7301_init+0x0/0x4b @ 1 initcall max7301_init+0x0/0x4b returned 0 after 0 usecs calling max732x_init+0x0/0x4b @ 1 initcall max732x_init+0x0/0x4b returned 0 after 0 usecs calling mc33880_init+0x0/0x4b @ 1 initcall mc33880_init+0x0/0x4b returned 0 after 0 usecs calling palmas_gpio_init+0x0/0x4b @ 1 initcall palmas_gpio_init+0x0/0x4b returned 0 after 0 usecs calling pca953x_init+0x0/0x4b @ 1 initcall pca953x_init+0x0/0x4b returned 0 after 0 usecs calling rc5t583_gpio_init+0x0/0x4b @ 1 initcall rc5t583_gpio_init+0x0/0x4b returned 0 after 0 usecs calling tc3589x_gpio_init+0x0/0x4b @ 1 initcall tc3589x_gpio_init+0x0/0x4b returned 0 after 0 usecs calling tps6586x_gpio_init+0x0/0x4b @ 1 initcall tps6586x_gpio_init+0x0/0x4b returned 0 after 0 usecs calling wm831x_gpio_init+0x0/0x4b @ 1 initcall wm831x_gpio_init+0x0/0x4b returned 0 after 0 usecs calling wm8994_gpio_init+0x0/0x4b @ 1 initcall wm8994_gpio_init+0x0/0x4b returned 0 after 0 usecs calling pwm_debugfs_init+0x0/0x5a @ 1 initcall pwm_debugfs_init+0x0/0x5a returned 0 after 0 usecs calling pwm_sysfs_init+0x0/0x4e @ 1 initcall pwm_sysfs_init+0x0/0x4e returned 0 after 0 usecs calling pci_slot_init+0x0/0x60 @ 1 initcall pci_slot_init+0x0/0x60 returned 0 after 0 usecs calling fbmem_init+0x0/0x1a6 @ 1 initcall fbmem_init+0x0/0x1a6 returned 0 after 0 usecs calling acpi_init+0x0/0x2b4 @ 1 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: 1 ACPI AML tables successfully acquired and loaded ACPI: Interpreter enabled ACPI: PM: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug PCI: Using E820 reservations for host bridge windows ACPI: Enabled 2 GPEs in block 00 to 0F ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A03:00: _OSC: OS supports [Segments HPX-Type3] acpi PNP0A03:00: PCIe port services disabled; not requesting _OSC control acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. acpi resource window ([0x440000000-0x4bfffffff] ignored, not CPU addressable) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x20 @ 1 pci 0000:00:00.0: quirk_mmio_always_on+0x0/0x20 took 0 usecs pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:01.3: calling acpi_pm_check_blacklist+0x0/0x40 @ 1 pci 0000:00:01.3: acpi_pm_check_blacklist+0x0/0x40 took 0 usecs pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 pci 0000:00:01.3: calling quirk_piix4_acpi+0x0/0x230 @ 1 pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB pci 0000:00:01.3: quirk_piix4_acpi+0x0/0x230 took 1953 usecs pci 0000:00:01.3: calling pci_fixup_piix4_acpi+0x0/0x20 @ 1 pci 0000:00:01.3: pci_fixup_piix4_acpi+0x0/0x20 took 0 usecs pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] pci 0000:00:02.0: calling pci_fixup_video+0x0/0x160 @ 1 pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:02.0: pci_fixup_video+0x0/0x160 took 976 usecs pci 0000:00:03.0: calling quirk_f0_vpd_link+0x0/0xe0 @ 1 pci 0000:00:03.0: quirk_f0_vpd_link+0x0/0xe0 took 0 usecs pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] pci_bus 0000:00: on NUMA node 0 ACPI: PCI: Interrupt link LNKA configured for IRQ 10 ACPI: PCI: Interrupt link LNKB configured for IRQ 10 ACPI: PCI: Interrupt link LNKC configured for IRQ 11 ACPI: PCI: Interrupt link LNKD configured for IRQ 11 ACPI: PCI: Interrupt link LNKS configured for IRQ 9 initcall acpi_init+0x0/0x2b4 returned 0 after 167000 usecs calling pnp_init+0x0/0x49 @ 1 initcall pnp_init+0x0/0x49 returned 0 after 0 usecs calling regulator_fixed_voltage_init+0x0/0x4b @ 1 initcall regulator_fixed_voltage_init+0x0/0x4b returned 0 after 0 usecs calling aat2870_regulator_init+0x0/0x4b @ 1 initcall aat2870_regulator_init+0x0/0x4b returned 0 after 0 usecs calling ad5398_init+0x0/0x4b @ 1 initcall ad5398_init+0x0/0x4b returned 0 after 0 usecs calling da9052_regulator_init+0x0/0x4b @ 1 initcall da9052_regulator_init+0x0/0x4b returned 0 after 0 usecs calling da9063_regulator_init+0x0/0x4b @ 1 initcall da9063_regulator_init+0x0/0x4b returned 0 after 0 usecs calling isl6271a_init+0x0/0x4b @ 1 initcall isl6271a_init+0x0/0x4b returned 0 after 0 usecs calling lp8788_buck_init+0x0/0x4b @ 1 initcall lp8788_buck_init+0x0/0x4b returned 0 after 0 usecs calling lp8788_ldo_init+0x0/0x50 @ 1 initcall lp8788_ldo_init+0x0/0x50 returned 0 after 0 usecs calling max1586_pmic_init+0x0/0x4b @ 1 initcall max1586_pmic_init+0x0/0x4b returned 0 after 0 usecs calling max8649_init+0x0/0x4b @ 1 initcall max8649_init+0x0/0x4b returned 0 after 0 usecs calling max8952_pmic_init+0x0/0x4b @ 1 initcall max8952_pmic_init+0x0/0x4b returned 0 after 0 usecs calling max8973_init+0x0/0x4b @ 1 initcall max8973_init+0x0/0x4b returned 0 after 0 usecs calling mc13783_regulator_init+0x0/0x4b @ 1 initcall mc13783_regulator_init+0x0/0x4b returned 0 after 0 usecs calling mc13892_regulator_init+0x0/0x4b @ 1 initcall mc13892_regulator_init+0x0/0x4b returned 0 after 0 usecs calling palmas_init+0x0/0x4b @ 1 initcall palmas_init+0x0/0x4b returned 0 after 0 usecs calling tps51632_init+0x0/0x4b @ 1 initcall tps51632_init+0x0/0x4b returned 0 after 0 usecs calling rc5t583_regulator_init+0x0/0x4b @ 1 initcall rc5t583_regulator_init+0x0/0x4b returned 0 after 0 usecs calling tps62360_init+0x0/0x4b @ 1 initcall tps62360_init+0x0/0x4b returned 0 after 0 usecs calling tps_65023_init+0x0/0x4b @ 1 initcall tps_65023_init+0x0/0x4b returned 0 after 0 usecs calling tps65217_regulator_init+0x0/0x4b @ 1 initcall tps65217_regulator_init+0x0/0x4b returned 0 after 0 usecs calling tps6586x_regulator_init+0x0/0x4b @ 1 initcall tps6586x_regulator_init+0x0/0x4b returned 0 after 0 usecs calling twlreg_init+0x0/0x4b @ 1 initcall twlreg_init+0x0/0x4b returned 0 after 0 usecs calling twlreg_init+0x0/0x4b @ 1 initcall twlreg_init+0x0/0x4b returned 0 after 0 usecs calling wm831x_dcdc_init+0x0/0x50 @ 1 initcall wm831x_dcdc_init+0x0/0x50 returned 0 after 0 usecs calling wm831x_isink_init+0x0/0x91 @ 1 initcall wm831x_isink_init+0x0/0x91 returned 0 after 0 usecs calling wm831x_ldo_init+0x0/0x50 @ 1 initcall wm831x_ldo_init+0x0/0x50 returned 0 after 0 usecs calling wm8400_regulator_init+0x0/0x4b @ 1 initcall wm8400_regulator_init+0x0/0x4b returned 0 after 0 usecs calling misc_init+0x0/0x17e @ 1 initcall misc_init+0x0/0x17e returned 0 after 0 usecs calling iommu_subsys_init+0x0/0x2a0 @ 1 iommu: Default domain type: Translated iommu: DMA domain TLB invalidation policy: lazy mode initcall iommu_subsys_init+0x0/0x2a0 returned 0 after 1000 usecs calling dp_aux_bus_init+0x0/0x6c @ 1 initcall dp_aux_bus_init+0x0/0x6c returned 0 after 0 usecs calling parport_default_proc_register+0x0/0xc3 @ 1 initcall parport_default_proc_register+0x0/0xc3 returned 0 after 1000 usecs calling tifm_init+0x0/0x132 @ 1 initcall tifm_init+0x0/0x132 returned 0 after 1000 usecs calling uacce_init+0x0/0xdf @ 1 initcall uacce_init+0x0/0xdf returned 0 after 0 usecs calling pm805_i2c_init+0x0/0x4b @ 1 initcall pm805_i2c_init+0x0/0x4b returned 0 after 0 usecs calling act8945a_i2c_init+0x0/0x4b @ 1 initcall act8945a_i2c_init+0x0/0x4b returned 0 after 0 usecs calling sta2x11_drivers_init+0x0/0x50 @ 1 initcall sta2x11_drivers_init+0x0/0x50 returned 0 after 0 usecs calling tc3589x_init+0x0/0x4b @ 1 initcall tc3589x_init+0x0/0x4b returned 0 after 0 usecs calling wm8400_driver_init+0x0/0x91 @ 1 initcall wm8400_driver_init+0x0/0x91 returned 0 after 0 usecs calling wm831x_spi_init+0x0/0x8c @ 1 initcall wm831x_spi_init+0x0/0x8c returned 0 after 0 usecs calling tps6105x_init+0x0/0x4b @ 1 initcall tps6105x_init+0x0/0x4b returned 0 after 0 usecs calling tps65217_init+0x0/0x4b @ 1 initcall tps65217_init+0x0/0x4b returned 0 after 0 usecs calling mc13xxx_i2c_init+0x0/0x4b @ 1 initcall mc13xxx_i2c_init+0x0/0x4b returned 0 after 0 usecs calling da903x_init+0x0/0x4b @ 1 initcall da903x_init+0x0/0x4b returned 0 after 0 usecs calling da9052_i2c_init+0x0/0x91 @ 1 initcall da9052_i2c_init+0x0/0x91 returned 0 after 0 usecs calling lp8788_init+0x0/0x4b @ 1 initcall lp8788_init+0x0/0x4b returned 0 after 0 usecs calling da9055_i2c_init+0x0/0x91 @ 1 initcall da9055_i2c_init+0x0/0x91 returned 0 after 0 usecs calling tps6586x_init+0x0/0x4b @ 1 initcall tps6586x_init+0x0/0x4b returned 0 after 0 usecs calling aat2870_init+0x0/0x4b @ 1 initcall aat2870_init+0x0/0x4b returned 0 after 0 usecs calling palmas_i2c_init+0x0/0x4b @ 1 initcall palmas_i2c_init+0x0/0x4b returned 0 after 0 usecs calling rc5t583_i2c_init+0x0/0x4b @ 1 initcall rc5t583_i2c_init+0x0/0x4b returned 0 after 0 usecs calling lm3533_i2c_init+0x0/0x4b @ 1 initcall lm3533_i2c_init+0x0/0x4b returned 0 after 0 usecs calling rsmu_i2c_init+0x0/0x4b @ 1 initcall rsmu_i2c_init+0x0/0x4b returned 0 after 0 usecs calling dax_core_init+0x0/0x1dc @ 1 initcall dax_core_init+0x0/0x1dc returned 0 after 1000 usecs calling dma_buf_init+0x0/0xbf @ 1 initcall dma_buf_init+0x0/0xbf returned 0 after 0 usecs calling dma_resv_lockdep+0x0/0x5dc @ 1 initcall dma_resv_lockdep+0x0/0x5dc returned 0 after 0 usecs calling init_scsi+0x0/0x1a2 @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x1a2 returned 0 after 2000 usecs calling ata_init+0x0/0xb4 @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0xb4 returned 0 after 0 usecs calling pxa2xx_spi_init+0x0/0x4b @ 1 initcall pxa2xx_spi_init+0x0/0x4b returned 0 after 0 usecs calling init_pcmcia_cs+0x0/0x7a @ 1 initcall init_pcmcia_cs+0x0/0x7a returned 0 after 0 usecs calling usb_common_init+0x0/0x51 @ 1 initcall usb_common_init+0x0/0x51 returned 0 after 0 usecs calling ulpi_init+0x0/0xa4 @ 1 initcall ulpi_init+0x0/0xa4 returned 0 after 0 usecs calling usb_init+0x0/0x354 @ 1 ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x354 returned 0 after 3000 usecs calling usb_phy_generic_init+0x0/0x4b @ 1 initcall usb_phy_generic_init+0x0/0x4b returned 0 after 0 usecs calling xdbc_init+0x0/0x2a2 @ 1 initcall xdbc_init+0x0/0x2a2 returned 0 after 0 usecs calling usb_udc_init+0x0/0xf8 @ 1 initcall usb_udc_init+0x0/0xf8 returned 0 after 0 usecs calling usb_roles_init+0x0/0x7d @ 1 initcall usb_roles_init+0x0/0x7d returned 0 after 0 usecs calling serio_init+0x0/0x8f @ 1 initcall serio_init+0x0/0x8f returned 0 after 0 usecs calling gameport_init+0x0/0x8f @ 1 initcall gameport_init+0x0/0x8f returned 0 after 0 usecs calling input_init+0x0/0x155 @ 1 initcall input_init+0x0/0x155 returned 0 after 0 usecs calling dw_i2c_init_driver+0x0/0x4b @ 1 initcall dw_i2c_init_driver+0x0/0x4b returned 0 after 0 usecs calling i2c_gpio_init+0x0/0x8e @ 1 initcall i2c_gpio_init+0x0/0x8e returned 0 after 0 usecs calling i2c_adap_pxa_init+0x0/0x4b @ 1 initcall i2c_adap_pxa_init+0x0/0x4b returned 0 after 0 usecs calling i3c_init+0x0/0xca @ 1 initcall i3c_init+0x0/0xca returned 0 after 0 usecs calling rc_core_init+0x0/0x110 @ 1 initcall rc_core_init+0x0/0x110 returned 0 after 0 usecs calling cec_devnode_init+0x0/0x1aa @ 1 cec: Failed to create debugfs cec dir initcall cec_devnode_init+0x0/0x1aa returned 0 after 1000 usecs calling power_supply_class_init+0x0/0x9c @ 1 initcall power_supply_class_init+0x0/0x9c returned 0 after 0 usecs calling hwmon_init+0x0/0xa5 @ 1 initcall hwmon_init+0x0/0xa5 returned 0 after 0 usecs calling leds_init+0x0/0x8b @ 1 initcall leds_init+0x0/0x8b returned 0 after 0 usecs calling intel_scu_ipc_init+0x0/0x4e @ 1 initcall intel_scu_ipc_init+0x0/0x4e returned 0 after 0 usecs calling remoteproc_init+0x0/0x109 @ 1 initcall remoteproc_init+0x0/0x109 returned 0 after 0 usecs calling glink_rpm_init+0x0/0x4b @ 1 initcall glink_rpm_init+0x0/0x4b returned 0 after 0 usecs calling rpmsg_init+0x0/0x95 @ 1 initcall rpmsg_init+0x0/0x95 returned 0 after 0 usecs calling rt8973a_muic_i2c_init+0x0/0x4b @ 1 initcall rt8973a_muic_i2c_init+0x0/0x4b returned 0 after 0 usecs calling ras_init+0x0/0x57 @ 1 initcall ras_init+0x0/0x57 returned 0 after 0 usecs calling nvmem_init+0x0/0x49 @ 1 initcall nvmem_init+0x0/0x49 returned 0 after 0 usecs calling sdam_init+0x0/0x4b @ 1 initcall sdam_init+0x0/0x4b returned 0 after 0 usecs calling fpga_mgr_class_init+0x0/0xa6 @ 1 FPGA manager framework initcall fpga_mgr_class_init+0x0/0xa6 returned 0 after 1000 usecs calling fpga_bridge_dev_init+0x0/0x8b @ 1 initcall fpga_bridge_dev_init+0x0/0x8b returned 0 after 0 usecs calling fpga_region_init+0x0/0x8b @ 1 initcall fpga_region_init+0x0/0x8b returned 0 after 0 usecs calling mux_init+0x0/0xa4 @ 1 initcall mux_init+0x0/0xa4 returned 0 after 0 usecs calling siox_init+0x0/0x96 @ 1 initcall siox_init+0x0/0x96 returned 0 after 0 usecs calling counter_init+0x0/0xd2 @ 1 initcall counter_init+0x0/0xd2 returned 0 after 0 usecs calling init_soundcore+0x0/0x84 @ 1 initcall init_soundcore+0x0/0x84 returned 0 after 0 usecs calling proto_init+0x0/0x49 @ 1 initcall proto_init+0x0/0x49 returned 0 after 0 usecs calling net_dev_init+0x0/0x531 @ 1 initcall net_dev_init+0x0/0x531 returned 0 after 2000 usecs calling neigh_init+0x0/0xe9 @ 1 initcall neigh_init+0x0/0xe9 returned 0 after 0 usecs calling fib_notifier_init+0x0/0x49 @ 1 initcall fib_notifier_init+0x0/0x49 returned 0 after 0 usecs calling ethnl_init+0x0/0x112 @ 1 initcall ethnl_init+0x0/0x112 returned 0 after 0 usecs calling nexthop_init+0x0/0x191 @ 1 initcall nexthop_init+0x0/0x191 returned 0 after 0 usecs calling pci_subsys_init+0x0/0x173 @ 1 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0xbffe0000-0xbfffffff] initcall pci_subsys_init+0x0/0x173 returned 0 after 2000 usecs calling vsprintf_init_hashval+0x0/0x47 @ 1 initcall vsprintf_init_hashval+0x0/0x47 returned 0 after 0 usecs calling dcdbas_init+0x0/0xca @ 1 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) initcall dcdbas_init+0x0/0xca returned 0 after 2000 usecs calling nmi_warning_debugfs+0x0/0x5c @ 1 initcall nmi_warning_debugfs+0x0/0x5c returned 0 after 0 usecs calling save_microcode_in_initrd+0x0/0x110 @ 1 initcall save_microcode_in_initrd+0x0/0x110 returned 0 after 0 usecs calling hpet_late_init+0x0/0x1ef @ 1 initcall hpet_late_init+0x0/0x1ef returned 0 after 0 usecs calling iomem_init_inode+0x0/0x126 @ 1 initcall iomem_init_inode+0x0/0x126 returned 0 after 1000 usecs calling clocksource_done_booting+0x0/0xae @ 1 clocksource: Switched to clocksource kvm-clock initcall clocksource_done_booting+0x0/0xae returned 0 after 2142 usecs calling tracer_init_tracefs+0x0/0x1ec @ 1 initcall tracer_init_tracefs+0x0/0x1ec returned 0 after 78 usecs calling init_trace_printk_function_export+0x0/0x92 @ 1 initcall init_trace_printk_function_export+0x0/0x92 returned 0 after 407 usecs calling init_kprobe_trace+0x0/0xcc @ 1 initcall init_kprobe_trace+0x0/0xcc returned 0 after 102 usecs calling init_dynamic_event+0x0/0x92 @ 1 initcall init_dynamic_event+0x0/0x92 returned 0 after 38 usecs calling init_uprobe_trace+0x0/0xf6 @ 1 initcall init_uprobe_trace+0x0/0xf6 returned 0 after 114 usecs calling secretmem_init+0x0/0xa2 @ 1 initcall secretmem_init+0x0/0xa2 returned 0 after 1 usecs calling init_fs_stat_sysctls+0x0/0x54 @ 1 initcall init_fs_stat_sysctls+0x0/0x54 returned 0 after 30 usecs calling init_fs_exec_sysctls+0x0/0x54 @ 1 initcall init_fs_exec_sysctls+0x0/0x54 returned 0 after 15 usecs calling init_pipe_fs+0x0/0xea @ 1 initcall init_pipe_fs+0x0/0xea returned 0 after 260 usecs calling init_fs_namei_sysctls+0x0/0x54 @ 1 initcall init_fs_namei_sysctls+0x0/0x54 returned 0 after 34 usecs calling init_fs_dcache_sysctls+0x0/0x54 @ 1 initcall init_fs_dcache_sysctls+0x0/0x54 returned 0 after 14 usecs calling init_fs_namespace_sysctls+0x0/0x54 @ 1 initcall init_fs_namespace_sysctls+0x0/0x54 returned 0 after 14 usecs calling inotify_user_setup+0x0/0x12a @ 1 initcall inotify_user_setup+0x0/0x12a returned 0 after 46 usecs calling eventpoll_init+0x0/0x150 @ 1 initcall eventpoll_init+0x0/0x150 returned 0 after 51 usecs calling anon_inode_init+0x0/0xb5 @ 1 initcall anon_inode_init+0x0/0xb5 returned 0 after 290 usecs calling proc_locks_init+0x0/0x59 @ 1 initcall proc_locks_init+0x0/0x59 returned 0 after 18 usecs calling init_fs_coredump_sysctls+0x0/0x54 @ 1 initcall init_fs_coredump_sysctls+0x0/0x54 returned 0 after 21 usecs calling iomap_init+0x0/0x57 @ 1 initcall iomap_init+0x0/0x57 returned 0 after 363 usecs calling dquot_init+0x0/0x22b @ 1 VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) initcall dquot_init+0x0/0x22b returned 0 after 1683 usecs calling proc_cmdline_init+0x0/0x57 @ 1 initcall proc_cmdline_init+0x0/0x57 returned 0 after 17 usecs calling proc_consoles_init+0x0/0x59 @ 1 initcall proc_consoles_init+0x0/0x59 returned 0 after 15 usecs calling proc_cpuinfo_init+0x0/0x55 @ 1 initcall proc_cpuinfo_init+0x0/0x55 returned 0 after 13 usecs calling proc_devices_init+0x0/0x60 @ 1 initcall proc_devices_init+0x0/0x60 returned 0 after 13 usecs calling proc_interrupts_init+0x0/0x59 @ 1 initcall proc_interrupts_init+0x0/0x59 returned 0 after 27 usecs calling proc_loadavg_init+0x0/0x5e @ 1 initcall proc_loadavg_init+0x0/0x5e returned 0 after 12 usecs calling proc_meminfo_init+0x0/0x5e @ 1 initcall proc_meminfo_init+0x0/0x5e returned 0 after 12 usecs calling proc_stat_init+0x0/0x55 @ 1 initcall proc_stat_init+0x0/0x55 returned 0 after 13 usecs calling proc_uptime_init+0x0/0x5e @ 1 initcall proc_uptime_init+0x0/0x5e returned 0 after 13 usecs calling proc_version_init+0x0/0x5e @ 1 initcall proc_version_init+0x0/0x5e returned 0 after 12 usecs calling proc_softirqs_init+0x0/0x5e @ 1 initcall proc_softirqs_init+0x0/0x5e returned 0 after 11 usecs calling proc_kmsg_init+0x0/0x58 @ 1 initcall proc_kmsg_init+0x0/0x58 returned 0 after 13 usecs calling proc_page_init+0x0/0xa0 @ 1 initcall proc_page_init+0x0/0xa0 returned 0 after 25 usecs calling fscache_init+0x0/0x16e @ 1 FS-Cache: Loaded initcall fscache_init+0x0/0x16e returned 0 after 575 usecs calling init_ramfs_fs+0x0/0x49 @ 1 initcall init_ramfs_fs+0x0/0x49 returned 0 after 6 usecs calling init_hugetlbfs_fs+0x0/0x342 @ 1 initcall init_hugetlbfs_fs+0x0/0x342 returned 0 after 297 usecs calling cachefiles_init+0x0/0x134 @ 1 CacheFiles: Loaded initcall cachefiles_init+0x0/0x134 returned 0 after 1195 usecs calling dynamic_debug_init_control+0x0/0x13a @ 1 initcall dynamic_debug_init_control+0x0/0x13a returned 0 after 26 usecs calling acpi_event_init+0x0/0xcc @ 1 initcall acpi_event_init+0x0/0xcc returned 0 after 107 usecs calling pnp_system_init+0x0/0x49 @ 1 initcall pnp_system_init+0x0/0x49 returned 0 after 85 usecs calling pnpacpi_init+0x0/0x11c @ 1 pnp: PnP ACPI init pnp 00:02: [dma 2] pnp: PnP ACPI: found 7 devices initcall pnpacpi_init+0x0/0x11c returned 0 after 6750 usecs calling chr_dev_init+0x0/0x1e0 @ 1 initcall chr_dev_init+0x0/0x1e0 returned 0 after 2085 usecs calling hwrng_modinit+0x0/0x170 @ 1 initcall hwrng_modinit+0x0/0x170 returned 0 after 315 usecs calling firmware_class_init+0x0/0xe0 @ 1 initcall firmware_class_init+0x0/0xe0 returned 0 after 100 usecs calling init_pcmcia_bus+0x0/0xfe @ 1 initcall init_pcmcia_bus+0x0/0xfe returned 0 after 143 usecs calling init_acpi_pm_clocksource+0x0/0x27a @ 1 clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns initcall init_acpi_pm_clocksource+0x0/0x27a returned 0 after 40021 usecs calling ssb_modinit+0x0/0x13b @ 1 initcall ssb_modinit+0x0/0x13b returned 0 after 219 usecs calling bcma_init_bus_register+0x0/0x9e @ 1 initcall bcma_init_bus_register+0x0/0x9e returned 0 after 134 usecs calling intel_punit_ipc_init+0x0/0x4b @ 1 initcall intel_punit_ipc_init+0x0/0x4b returned 0 after 89 usecs calling powercap_init+0x0/0x84 @ 1 initcall powercap_init+0x0/0x84 returned 0 after 484 usecs calling rapl_init+0x0/0x13b @ 1 initcall rapl_init+0x0/0x13b returned 0 after 212 usecs calling mcb_init+0x0/0x30 @ 1 initcall mcb_init+0x0/0x30 returned 0 after 100 usecs calling sysctl_core_init+0x0/0x6b @ 1 initcall sysctl_core_init+0x0/0x6b returned 0 after 85 usecs calling eth_offload_init+0x0/0x4a @ 1 kwatchdog (35) used greatest stack depth: 7152 bytes left initcall eth_offload_init+0x0/0x4a returned 0 after 24 usecs calling ipv4_offload_init+0x0/0x16a @ 1 initcall ipv4_offload_init+0x0/0x16a returned 0 after 4 usecs calling inet_init+0x0/0x59e @ 1 NET: Registered PF_INET protocol family IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 24576 bytes, linear) Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) TCP bind hash table entries: 8192 (order: 7, 786432 bytes, linear) TCP: Hash tables configured (established 8192 bind 8192) UDP hash table entries: 512 (order: 3, 57344 bytes, linear) UDP-Lite hash table entries: 512 (order: 3, 57344 bytes, linear) initcall inet_init+0x0/0x59e returned 0 after 13965 usecs calling af_unix_init+0x0/0x1de @ 1 NET: Registered PF_UNIX/PF_LOCAL protocol family initcall af_unix_init+0x0/0x1de returned 0 after 950 usecs calling ipv6_offload_init+0x0/0x14d @ 1 initcall ipv6_offload_init+0x0/0x14d returned 0 after 4 usecs calling init_sunrpc+0x0/0x1e0 @ 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. initcall init_sunrpc+0x0/0x1e0 returned 0 after 4272 usecs calling pcibios_assign_resources+0x0/0xc6 @ 1 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window] initcall pcibios_assign_resources+0x0/0xc6 returned 0 after 4332 usecs calling pci_apply_final_quirks+0x0/0x281 @ 1 pci 0000:00:00.0: calling quirk_passive_release+0x0/0xb0 @ 1 pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:00.0: quirk_passive_release+0x0/0xb0 took 851 usecs pci 0000:00:00.0: calling quirk_natoma+0x0/0x20 @ 1 pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:00.0: quirk_natoma+0x0/0x20 took 781 usecs pci 0000:00:01.0: calling quirk_isa_dma_hangs+0x0/0x20 @ 1 pci 0000:00:01.0: Activating ISA DMA hang workarounds pci 0000:00:01.0: quirk_isa_dma_hangs+0x0/0x20 took 840 usecs pci 0000:00:03.0: calling quirk_e100_interrupt+0x0/0x230 @ 1 pci 0000:00:03.0: quirk_e100_interrupt+0x0/0x230 took 1 usecs PCI: CLS 0 bytes, default 64 initcall pci_apply_final_quirks+0x0/0x281 returned 0 after 10608 usecs calling acpi_reserve_resources+0x0/0x1c0 @ 1 initcall acpi_reserve_resources+0x0/0x1c0 returned 0 after 97 usecs calling populate_rootfs+0x0/0xb2 @ 1 Unpacking initramfs... Freeing initrd memory: 93008K initcall populate_rootfs+0x0/0xb2 returned 0 after 9707313 usecs calling pci_iommu_init+0x0/0xaf @ 1 initcall pci_iommu_init+0x0/0xaf returned 0 after 2 usecs calling sta2x11_mfd_init+0x0/0x6f @ 1 sta2x11_mfd_init initcall sta2x11_mfd_init+0x0/0x6f returned 0 after 642 usecs calling rapl_pmu_init+0x0/0x2c1 @ 1 RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer initcall rapl_pmu_init+0x0/0x2c1 returned 0 after 1516 usecs calling amd_ibs_init+0x0/0x1e7 @ 1 initcall amd_ibs_init+0x0/0x1e7 returned -19 after 1 usecs calling msr_init+0x0/0xbf @ 1 initcall msr_init+0x0/0xbf returned 0 after 25 usecs calling cstate_pmu_init+0x0/0x21f @ 1 initcall cstate_pmu_init+0x0/0x21f returned -19 after 1 usecs calling register_kernel_offset_dumper+0x0/0x4f @ 1 initcall register_kernel_offset_dumper+0x0/0x4f returned 0 after 3 usecs calling i8259A_init_ops+0x0/0x75 @ 1 initcall i8259A_init_ops+0x0/0x75 returned 0 after 7 usecs calling init_tsc_clocksource+0x0/0x18a @ 1 clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3704c1a9, max_idle_ns: 440795296692 ns initcall init_tsc_clocksource+0x0/0x18a returned 0 after 1358 usecs calling add_rtc_cmos+0x0/0x1b6 @ 1 initcall add_rtc_cmos+0x0/0x1b6 returned 0 after 4 usecs calling i8237A_init_ops+0x0/0x96 @ 1 initcall i8237A_init_ops+0x0/0x96 returned 0 after 14 usecs calling umwait_init+0x0/0x173 @ 1 initcall umwait_init+0x0/0x173 returned -19 after 1 usecs calling msr_init+0x0/0x19b @ 1 initcall msr_init+0x0/0x19b returned 0 after 1773 usecs calling ioapic_init_ops+0x0/0x4a @ 1 initcall ioapic_init_ops+0x0/0x4a returned 0 after 79 usecs calling add_bus_probe+0x0/0x77 @ 1 initcall add_bus_probe+0x0/0x77 returned 0 after 1 usecs calling pt_dump_init+0x0/0x8d @ 1 initcall pt_dump_init+0x0/0x8d returned 0 after 1 usecs calling pt_dump_debug_init+0x0/0xa3 @ 1 initcall pt_dump_debug_init+0x0/0xa3 returned 0 after 2 usecs calling twofish_glue_init+0x0/0x49 @ 1 initcall twofish_glue_init+0x0/0x49 returned 0 after 43 usecs calling serpent_sse2_init+0x0/0x9d @ 1 initcall serpent_sse2_init+0x0/0x9d returned 0 after 1623 usecs calling crc32c_intel_mod_init+0x0/0x89 @ 1 initcall crc32c_intel_mod_init+0x0/0x89 returned 0 after 17 usecs calling crc32_pclmul_mod_init+0x0/0xa4 @ 1 initcall crc32_pclmul_mod_init+0x0/0xa4 returned 0 after 20 usecs calling punit_atom_debug_init+0x0/0xdd @ 1 initcall punit_atom_debug_init+0x0/0xdd returned -19 after 1 usecs calling alix_init+0x0/0x196 @ 1 initcall alix_init+0x0/0x196 returned 0 after 2 usecs calling net5501_init+0x0/0x115 @ 1 initcall net5501_init+0x0/0x115 returned 0 after 1 usecs calling iris_init+0x0/0xf0 @ 1 The force parameter has not been set to 1. The Iris poweroff handler will not be installed. initcall iris_init+0x0/0xf0 returned -19 after 1191 usecs calling iosf_mbi_init+0x0/0x6b @ 1 initcall iosf_mbi_init+0x0/0x6b returned 0 after 190 usecs calling imr_init+0x0/0x239 @ 1 initcall imr_init+0x0/0x239 returned -19 after 1 usecs calling proc_execdomains_init+0x0/0x57 @ 1 initcall proc_execdomains_init+0x0/0x57 returned 0 after 60 usecs calling register_warn_debugfs+0x0/0x5a @ 1 initcall register_warn_debugfs+0x0/0x5a returned 0 after 1 usecs calling cpuhp_sysfs_init+0x0/0x1a1 @ 1 initcall cpuhp_sysfs_init+0x0/0x1a1 returned 0 after 148 usecs calling ioresources_init+0x0/0x84 @ 1 initcall ioresources_init+0x0/0x84 returned 0 after 26 usecs calling lockdep_proc_init+0x0/0xd1 @ 1 initcall lockdep_proc_init+0x0/0xd1 returned 0 after 39 usecs calling irq_gc_init_ops+0x0/0x4a @ 1 initcall irq_gc_init_ops+0x0/0x4a returned 0 after 6 usecs calling irq_debugfs_init+0x0/0x12e @ 1 initcall irq_debugfs_init+0x0/0x12e returned 0 after 17 usecs calling proc_modules_init+0x0/0x55 @ 1 initcall proc_modules_init+0x0/0x55 returned 0 after 23 usecs calling timekeeping_init_ops+0x0/0x4a @ 1 initcall timekeeping_init_ops+0x0/0x4a returned 0 after 6 usecs calling init_clocksource_sysfs+0x0/0x86 @ 1 initcall init_clocksource_sysfs+0x0/0x86 returned 0 after 345 usecs calling init_timer_list_procfs+0x0/0x88 @ 1 initcall init_timer_list_procfs+0x0/0x88 returned 0 after 19 usecs calling alarmtimer_init+0x0/0x13a @ 1 initcall alarmtimer_init+0x0/0x13a returned 0 after 108 usecs calling clockevents_init_sysfs+0x0/0x81 @ 1 initcall clockevents_init_sysfs+0x0/0x81 returned 0 after 623 usecs calling proc_dma_init+0x0/0x57 @ 1 initcall proc_dma_init+0x0/0x57 returned 0 after 17 usecs calling kallsyms_init+0x0/0x58 @ 1 initcall kallsyms_init+0x0/0x58 returned 0 after 14 usecs calling ikconfig_init+0x0/0xa5 @ 1 initcall ikconfig_init+0x0/0xa5 returned 0 after 23 usecs calling gcov_init+0x0/0x49 @ 1 initcall gcov_init+0x0/0x49 returned 0 after 5 usecs calling gcov_fs_init+0x0/0xaa @ 1 initcall gcov_fs_init+0x0/0xaa returned 0 after 1582605 usecs calling utsname_sysctl_init+0x0/0x4a @ 1 initcall utsname_sysctl_init+0x0/0x4a returned 0 after 30 usecs calling init_tracepoints+0x0/0x8c @ 1 initcall init_tracepoints+0x0/0x8c returned 0 after 5 usecs calling init_lstats_procfs+0x0/0x7a @ 1 initcall init_lstats_procfs+0x0/0x7a returned 0 after 36 usecs calling perf_event_sysfs_init+0x0/0x198 @ 1 initcall perf_event_sysfs_init+0x0/0x198 returned 0 after 1098 usecs calling system_trusted_keyring_init+0x0/0x158 @ 1 Initialise system trusted keyrings initcall system_trusted_keyring_init+0x0/0x158 returned 0 after 902 usecs calling blacklist_init+0x0/0x1cc @ 1 Key type blacklist registered initcall blacklist_init+0x0/0x1cc returned 0 after 690 usecs calling kswapd_init+0x0/0x5a @ 1 initcall kswapd_init+0x0/0x5a returned 0 after 500 usecs calling mm_compute_batch_init+0x0/0x4a @ 1 initcall mm_compute_batch_init+0x0/0x4a returned 0 after 1 usecs calling workingset_init+0x0/0x155 @ 1 workingset: timestamp_bits=14 max_order=20 bucket_order=6 initcall workingset_init+0x0/0x155 returned 0 after 913 usecs calling proc_vmalloc_init+0x0/0x5c @ 1 initcall proc_vmalloc_init+0x0/0x5c returned 0 after 30 usecs calling procswaps_init+0x0/0x55 @ 1 initcall procswaps_init+0x0/0x55 returned 0 after 16 usecs calling pfn_inject_init+0x0/0x196 @ 1 initcall pfn_inject_init+0x0/0x196 returned 0 after 3 usecs calling fcntl_init+0x0/0x5f @ 1 initcall fcntl_init+0x0/0x5f returned 0 after 9 usecs calling proc_filesystems_init+0x0/0x57 @ 1 initcall proc_filesystems_init+0x0/0x57 returned 0 after 20 usecs calling start_dirtytime_writeback+0x0/0x4f @ 1 initcall start_dirtytime_writeback+0x0/0x4f returned 0 after 7 usecs calling dio_init+0x0/0x62 @ 1 initcall dio_init+0x0/0x62 returned 0 after 9 usecs calling mbcache_init+0x0/0x8a @ 1 initcall mbcache_init+0x0/0x8a returned 0 after 69 usecs calling init_grace+0x0/0x49 @ 1 initcall init_grace+0x0/0x49 returned 0 after 19 usecs calling init_v2_quota_format+0x0/0x84 @ 1 initcall init_v2_quota_format+0x0/0x84 returned 0 after 53 usecs calling init_devpts_fs+0x0/0x89 @ 1 initcall init_devpts_fs+0x0/0x89 returned 0 after 98 usecs calling init_reiserfs_fs+0x0/0x11a @ 1 initcall init_reiserfs_fs+0x0/0x11a returned 0 after 31 usecs calling ext4_init_fs+0x0/0x4c0 @ 1 initcall ext4_init_fs+0x0/0x4c0 returned 0 after 599 usecs calling init_ext2_fs+0x0/0x11f @ 1 initcall init_ext2_fs+0x0/0x11f returned 0 after 16 usecs calling journal_init+0x0/0xba @ 1 initcall journal_init+0x0/0xba returned 0 after 83 usecs calling init_cramfs_fs+0x0/0xb6 @ 1 initcall init_cramfs_fs+0x0/0xb6 returned 0 after 127 usecs calling init_squashfs_fs+0x0/0x133 @ 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher initcall init_squashfs_fs+0x0/0x133 returned 0 after 893 usecs calling init_fat_fs+0x0/0x116 @ 1 initcall init_fat_fs+0x0/0x116 returned 0 after 24 usecs calling init_vfat_fs+0x0/0x49 @ 1 initcall init_vfat_fs+0x0/0x49 returned 0 after 6 usecs calling init_msdos_fs+0x0/0x49 @ 1 initcall init_msdos_fs+0x0/0x49 returned 0 after 5 usecs calling init_bfs_fs+0x0/0x11a @ 1 initcall init_bfs_fs+0x0/0x11a returned 0 after 22 usecs calling init_iso9660_fs+0x0/0x168 @ 1 initcall init_iso9660_fs+0x0/0x168 returned 0 after 118 usecs calling init_hfs_fs+0x0/0xde @ 1 initcall init_hfs_fs+0x0/0xde returned 0 after 18 usecs calling ecryptfs_init+0x0/0x490 @ 1 initcall ecryptfs_init+0x0/0x490 returned 0 after 1228 usecs calling vxfs_init+0x0/0xe3 @ 1 initcall vxfs_init+0x0/0xe3 returned 0 after 33 usecs calling init_nfs_fs+0x0/0x40b @ 1 initcall init_nfs_fs+0x0/0x40b returned 0 after 1125 usecs calling init_nfs_v2+0x0/0x4a @ 1 initcall init_nfs_v2+0x0/0x4a returned 0 after 44 usecs calling init_nfs_v3+0x0/0x4a @ 1 initcall init_nfs_v3+0x0/0x4a returned 0 after 3 usecs calling init_nlm+0x0/0x11b @ 1 initcall init_nlm+0x0/0x11b returned 0 after 106 usecs calling init_nls_cp437+0x0/0x4b @ 1 initcall init_nls_cp437+0x0/0x4b returned 0 after 45 usecs calling init_nls_cp775+0x0/0x4b @ 1 initcall init_nls_cp775+0x0/0x4b returned 0 after 2 usecs calling init_nls_cp850+0x0/0x4b @ 1 initcall init_nls_cp850+0x0/0x4b returned 0 after 2 usecs calling init_nls_cp852+0x0/0x4b @ 1 initcall init_nls_cp852+0x0/0x4b returned 0 after 3 usecs calling init_nls_cp857+0x0/0x4b @ 1 initcall init_nls_cp857+0x0/0x4b returned 0 after 3 usecs calling init_nls_cp860+0x0/0x4b @ 1 initcall init_nls_cp860+0x0/0x4b returned 0 after 3 usecs calling init_nls_cp861+0x0/0x4b @ 1 initcall init_nls_cp861+0x0/0x4b returned 0 after 3 usecs calling init_nls_cp862+0x0/0x4b @ 1 initcall init_nls_cp862+0x0/0x4b returned 0 after 3 usecs calling init_nls_cp863+0x0/0x4b @ 1 initcall init_nls_cp863+0x0/0x4b returned 0 after 3 usecs calling init_nls_cp864+0x0/0x4b @ 1 initcall init_nls_cp864+0x0/0x4b returned 0 after 3 usecs calling init_nls_cp866+0x0/0x4b @ 1 initcall init_nls_cp866+0x0/0x4b returned 0 after 3 usecs calling init_nls_cp869+0x0/0x4b @ 1 initcall init_nls_cp869+0x0/0x4b returned 0 after 3 usecs calling init_nls_cp874+0x0/0x4b @ 1 initcall init_nls_cp874+0x0/0x4b returned 0 after 3 usecs calling init_nls_cp932+0x0/0x4b @ 1 initcall init_nls_cp932+0x0/0x4b returned 0 after 3 usecs calling init_nls_euc_jp+0x0/0xa1 @ 1 initcall init_nls_euc_jp+0x0/0xa1 returned 0 after 5 usecs calling init_nls_cp936+0x0/0x4b @ 1 initcall init_nls_cp936+0x0/0x4b returned 0 after 3 usecs calling init_nls_cp949+0x0/0x4b @ 1 initcall init_nls_cp949+0x0/0x4b returned 0 after 3 usecs calling init_nls_cp950+0x0/0x4b @ 1 initcall init_nls_cp950+0x0/0x4b returned 0 after 3 usecs calling init_nls_cp1250+0x0/0x4b @ 1 initcall init_nls_cp1250+0x0/0x4b returned 0 after 3 usecs calling init_nls_cp1251+0x0/0x4b @ 1 initcall init_nls_cp1251+0x0/0x4b returned 0 after 3 usecs calling init_nls_ascii+0x0/0x4b @ 1 initcall init_nls_ascii+0x0/0x4b returned 0 after 3 usecs calling init_nls_iso8859_2+0x0/0x4b @ 1 initcall init_nls_iso8859_2+0x0/0x4b returned 0 after 3 usecs calling init_nls_iso8859_3+0x0/0x4b @ 1 initcall init_nls_iso8859_3+0x0/0x4b returned 0 after 3 usecs calling init_nls_iso8859_5+0x0/0x4b @ 1 initcall init_nls_iso8859_5+0x0/0x4b returned 0 after 3 usecs calling init_nls_iso8859_6+0x0/0x4b @ 1 initcall init_nls_iso8859_6+0x0/0x4b returned 0 after 3 usecs calling init_nls_iso8859_7+0x0/0x4b @ 1 initcall init_nls_iso8859_7+0x0/0x4b returned 0 after 3 usecs calling init_nls_iso8859_9+0x0/0x4b @ 1 initcall init_nls_iso8859_9+0x0/0x4b returned 0 after 4 usecs calling init_nls_iso8859_13+0x0/0x4b @ 1 initcall init_nls_iso8859_13+0x0/0x4b returned 0 after 3 usecs calling init_nls_iso8859_14+0x0/0x4b @ 1 initcall init_nls_iso8859_14+0x0/0x4b returned 0 after 3 usecs calling init_nls_iso8859_15+0x0/0x4b @ 1 initcall init_nls_iso8859_15+0x0/0x4b returned 0 after 3 usecs calling init_nls_koi8_r+0x0/0x4b @ 1 initcall init_nls_koi8_r+0x0/0x4b returned 0 after 3 usecs calling init_nls_koi8_u+0x0/0x4b @ 1 initcall init_nls_koi8_u+0x0/0x4b returned 0 after 3 usecs calling init_nls_koi8_ru+0x0/0xa1 @ 1 initcall init_nls_koi8_ru+0x0/0xa1 returned 0 after 5 usecs calling init_nls_utf8+0x0/0xac @ 1 initcall init_nls_utf8+0x0/0xac returned 0 after 5 usecs calling init_nls_maccyrillic+0x0/0x4b @ 1 initcall init_nls_maccyrillic+0x0/0x4b returned 0 after 3 usecs calling init_nls_macgaelic+0x0/0x4b @ 1 initcall init_nls_macgaelic+0x0/0x4b returned 0 after 3 usecs calling init_nls_maciceland+0x0/0x4b @ 1 initcall init_nls_maciceland+0x0/0x4b returned 0 after 3 usecs calling init_nls_macinuit+0x0/0x4b @ 1 initcall init_nls_macinuit+0x0/0x4b returned 0 after 3 usecs calling init_nls_macromanian+0x0/0x4b @ 1 initcall init_nls_macromanian+0x0/0x4b returned 0 after 3 usecs calling init_nls_macroman+0x0/0x4b @ 1 initcall init_nls_macroman+0x0/0x4b returned 0 after 3 usecs calling init_nls_macturkish+0x0/0x4b @ 1 initcall init_nls_macturkish+0x0/0x4b returned 0 after 3 usecs calling init_sysv_fs+0x0/0x10d @ 1 initcall init_sysv_fs+0x0/0x10d returned 0 after 31 usecs calling init_hpfs_fs+0x0/0x105 @ 1 initcall init_hpfs_fs+0x0/0x105 returned 0 after 19 usecs calling init_ntfs_fs+0x0/0x45c @ 1 ntfs: driver 2.1.32 [Flags: R/O DEBUG]. initcall init_ntfs_fs+0x0/0x45c returned 0 after 769 usecs calling init_ntfs_fs+0x0/0x17c @ 1 ntfs3: Max link count 4000 ntfs3: Enabled Linux POSIX ACLs support ntfs3: Read-only LZX/Xpress compression included initcall init_ntfs_fs+0x0/0x17c returned 0 after 2106 usecs calling init_efs_fs+0x0/0x11d @ 1 efs: 1.0a - http://aeschi.ch.eu.org/efs/ initcall init_efs_fs+0x0/0x11d returned 0 after 731 usecs calling init_affs_fs+0x0/0x11a @ 1 initcall init_affs_fs+0x0/0x11a returned 0 after 19 usecs calling init_romfs_fs+0x0/0x129 @ 1 romfs: ROMFS MTD (C) 2007 Red Hat, Inc. initcall init_romfs_fs+0x0/0x129 returned 0 after 730 usecs calling init_qnx4_fs+0x0/0x133 @ 1 QNX4 filesystem 0.2.3 registered. initcall init_qnx4_fs+0x0/0x133 returned 0 after 671 usecs calling init_qnx6_fs+0x0/0x133 @ 1 qnx6: QNX6 filesystem 1.0.0 registered. initcall init_qnx6_fs+0x0/0x133 returned 0 after 714 usecs calling init_adfs_fs+0x0/0x11a @ 1 initcall init_adfs_fs+0x0/0x11a returned 0 after 17 usecs calling ovl_init+0x0/0x12c @ 1 initcall ovl_init+0x0/0x12c returned 0 after 21 usecs calling orangefs_init+0x0/0x3ad @ 1 orangefs_debugfs_init: called with debug mask: :none: :0: orangefs_init: module version upstream loaded initcall orangefs_init+0x0/0x3ad returned 0 after 2316 usecs calling init_udf_fs+0x0/0x119 @ 1 initcall init_udf_fs+0x0/0x119 returned 0 after 19 usecs calling init_jfs_fs+0x0/0x52f @ 1 JFS: nTxBlock = 8192, nTxLock = 65536 initcall init_jfs_fs+0x0/0x52f returned 0 after 15922 usecs calling init_xfs_fs+0x0/0x470 @ 1 SGI XFS with ACLs, security attributes, scrub, repair, no debug enabled initcall init_xfs_fs+0x0/0x470 returned 0 after 2131 usecs calling init_nilfs_fs+0x0/0x122 @ 1 NILFS version 2 loaded initcall init_nilfs_fs+0x0/0x122 returned 0 after 619 usecs calling init_befs_fs+0x0/0x12a @ 1 befs: version: 0.9.3 initcall init_befs_fs+0x0/0x12a returned 0 after 533 usecs calling init_gfs2_fs+0x0/0x7b3 @ 1 gfs2: GFS2 installed initcall init_gfs2_fs+0x0/0x7b3 returned 0 after 3021 usecs calling init_f2fs_fs+0x0/0x4ae @ 1 initcall init_f2fs_fs+0x0/0x4ae returned 0 after 1308 usecs calling ipc_init+0x0/0x85 @ 1 initcall ipc_init+0x0/0x85 returned 0 after 97 usecs calling ipc_sysctl_init+0x0/0x8e @ 1 initcall ipc_sysctl_init+0x0/0x8e returned 0 after 65 usecs calling key_proc_init+0x0/0xc5 @ 1 initcall key_proc_init+0x0/0xc5 returned 0 after 23 usecs calling crc64_rocksoft_init+0x0/0x49 @ 1 initcall crc64_rocksoft_init+0x0/0x49 returned 0 after 31 usecs calling jent_mod_init+0x0/0xa1 @ 1 initcall jent_mod_init+0x0/0xa1 returned 0 after 23336 usecs calling asymmetric_key_init+0x0/0x49 @ 1 Key type asymmetric registered initcall asymmetric_key_init+0x0/0x49 returned 0 after 615 usecs calling x509_key_init+0x0/0x50 @ 1 Asymmetric key parser 'x509' registered initcall x509_key_init+0x0/0x50 returned 0 after 798 usecs calling pkcs8_key_init+0x0/0x49 @ 1 Asymmetric key parser 'pkcs8' registered initcall pkcs8_key_init+0x0/0x49 returned 0 after 710 usecs calling blkdev_init+0x0/0x57 @ 1 initcall blkdev_init+0x0/0x57 returned 0 after 125 usecs calling proc_genhd_init+0x0/0x7e @ 1 initcall proc_genhd_init+0x0/0x7e returned 0 after 86 usecs calling bsg_init+0x0/0x131 @ 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) initcall bsg_init+0x0/0x131 returned 0 after 1087 usecs calling deadline_init+0x0/0x49 @ 1 io scheduler mq-deadline registered initcall deadline_init+0x0/0x49 returned 0 after 734 usecs calling kyber_init+0x0/0x49 @ 1 io scheduler kyber registered initcall kyber_init+0x0/0x49 returned 0 after 633 usecs calling bfq_init+0x0/0x135 @ 1 io scheduler bfq registered initcall bfq_init+0x0/0x135 returned 0 after 633 usecs calling io_uring_init+0x0/0x75 @ 1 initcall io_uring_init+0x0/0x75 returned 0 after 11 usecs calling primes_init+0x0/0x49 @ 1 initcall primes_init+0x0/0x49 returned 0 after 2 usecs calling blake2s_mod_init+0x0/0x2e @ 1 initcall blake2s_mod_init+0x0/0x2e returned 0 after 1 usecs calling chacha20poly1305_init+0x0/0x2e @ 1 initcall chacha20poly1305_init+0x0/0x2e returned 0 after 1 usecs calling crc_t10dif_mod_init+0x0/0xb6 @ 1 initcall crc_t10dif_mod_init+0x0/0xb6 returned 0 after 889 usecs calling libcrc32c_mod_init+0x0/0x7a @ 1 initcall libcrc32c_mod_init+0x0/0x7a returned 0 after 1033 usecs calling crc64_rocksoft_mod_init+0x0/0xb6 @ 1 initcall crc64_rocksoft_mod_init+0x0/0xb6 returned 0 after 826 usecs calling percpu_counter_startup+0x0/0xf3 @ 1 initcall percpu_counter_startup+0x0/0xf3 returned 0 after 400 usecs calling madera_irq_driver_init+0x0/0x4b @ 1 initcall madera_irq_driver_init+0x0/0x4b returned 0 after 130 usecs calling simple_pm_bus_driver_init+0x0/0x4b @ 1 initcall simple_pm_bus_driver_init+0x0/0x4b returned 0 after 103 usecs calling phy_core_init+0x0/0xa6 @ 1 initcall phy_core_init+0x0/0xa6 returned 0 after 65 usecs calling lgm_phy_driver_init+0x0/0x4b @ 1 initcall lgm_phy_driver_init+0x0/0x4b returned 0 after 153 usecs calling bcm_kona_usb2_driver_init+0x0/0x4b @ 1 initcall bcm_kona_usb2_driver_init+0x0/0x4b returned 0 after 206 usecs calling cdns_torrent_phy_driver_init+0x0/0x4b @ 1 initcall cdns_torrent_phy_driver_init+0x0/0x4b returned 0 after 99 usecs calling cdns_dphy_platform_driver_init+0x0/0x4b @ 1 initcall cdns_dphy_platform_driver_init+0x0/0x4b returned 0 after 93 usecs calling cdns_salvo_phy_driver_init+0x0/0x4b @ 1 initcall cdns_salvo_phy_driver_init+0x0/0x4b returned 0 after 97 usecs calling intel_emmc_driver_init+0x0/0x4b @ 1 initcall intel_emmc_driver_init+0x0/0x4b returned 0 after 99 usecs calling mv_hsic_phy_driver_init+0x0/0x4b @ 1 initcall mv_hsic_phy_driver_init+0x0/0x4b returned 0 after 161 usecs calling mv_usb2_phy_driver_init+0x0/0x4b @ 1 initcall mv_usb2_phy_driver_init+0x0/0x4b returned 0 after 165 usecs calling phy_mdm6600_driver_init+0x0/0x4b @ 1 initcall phy_mdm6600_driver_init+0x0/0x4b returned 0 after 92 usecs calling mscc_ocelot_serdes_init+0x0/0x4b @ 1 initcall mscc_ocelot_serdes_init+0x0/0x4b returned 0 after 136 usecs calling tusb1210_driver_init+0x0/0x4b @ 1 initcall tusb1210_driver_init+0x0/0x4b returned 0 after 92 usecs calling max77620_pinctrl_driver_init+0x0/0x4b @ 1 initcall max77620_pinctrl_driver_init+0x0/0x4b returned 0 after 105 usecs calling microchip_sgpio_pinctrl_driver_init+0x0/0x4b @ 1 initcall microchip_sgpio_pinctrl_driver_init+0x0/0x4b returned 0 after 84 usecs calling palmas_pinctrl_driver_init+0x0/0x4b @ 1 initcall palmas_pinctrl_driver_init+0x0/0x4b returned 0 after 104 usecs calling madera_pin_driver_init+0x0/0x4b @ 1 initcall madera_pin_driver_init+0x0/0x4b returned 0 after 96 usecs calling bgpio_driver_init+0x0/0x4b @ 1 initcall bgpio_driver_init+0x0/0x4b returned 0 after 96 usecs calling dio48e_driver_init+0x0/0xa1 @ 1 initcall dio48e_driver_init+0x0/0xa1 returned -19 after 228 usecs calling idi_48_driver_init+0x0/0xa1 @ 1 initcall idi_48_driver_init+0x0/0xa1 returned -19 after 165 usecs calling idio_16_driver_init+0x0/0xa1 @ 1 initcall idio_16_driver_init+0x0/0xa1 returned -19 after 197 usecs calling gen_74x164_driver_init+0x0/0x4b @ 1 initcall gen_74x164_driver_init+0x0/0x4b returned 0 after 222 usecs calling mmio_74xx_gpio_driver_init+0x0/0x4b @ 1 initcall mmio_74xx_gpio_driver_init+0x0/0x4b returned 0 after 104 usecs calling adnp_i2c_driver_init+0x0/0x4b @ 1 initcall adnp_i2c_driver_init+0x0/0x4b returned 0 after 172 usecs calling adp5520_gpio_driver_init+0x0/0x4b @ 1 initcall adp5520_gpio_driver_init+0x0/0x4b returned 0 after 105 usecs calling gpio_aggregator_init+0x0/0x4b @ 1 initcall gpio_aggregator_init+0x0/0x4b returned 0 after 115 usecs calling arizona_gpio_driver_init+0x0/0x4b @ 1 initcall arizona_gpio_driver_init+0x0/0x4b returned 0 after 108 usecs calling bd9571mwv_gpio_driver_init+0x0/0x4b @ 1 initcall bd9571mwv_gpio_driver_init+0x0/0x4b returned 0 after 98 usecs calling cdns_gpio_driver_init+0x0/0x4b @ 1 initcall cdns_gpio_driver_init+0x0/0x4b returned 0 after 105 usecs calling da9052_gpio_driver_init+0x0/0x4b @ 1 initcall da9052_gpio_driver_init+0x0/0x4b returned 0 after 100 usecs calling ftgpio_gpio_driver_init+0x0/0x4b @ 1 initcall ftgpio_gpio_driver_init+0x0/0x4b returned 0 after 114 usecs calling gpiomm_driver_init+0x0/0x4f @ 1 initcall gpiomm_driver_init+0x0/0x4f returned -19 after 173 usecs calling gw_pld_driver_init+0x0/0x4b @ 1 initcall gw_pld_driver_init+0x0/0x4b returned 0 after 111 usecs calling hlwd_gpio_driver_init+0x0/0x4b @ 1 initcall hlwd_gpio_driver_init+0x0/0x4b returned 0 after 102 usecs calling ichx_gpio_driver_init+0x0/0x4b @ 1 initcall ichx_gpio_driver_init+0x0/0x4b returned 0 after 130 usecs calling it87_gpio_init+0x0/0x665 @ 1 gpio_it87: no device initcall it87_gpio_init+0x0/0x665 returned -19 after 573 usecs calling kempld_gpio_driver_init+0x0/0x4b @ 1 initcall kempld_gpio_driver_init+0x0/0x4b returned 0 after 125 usecs calling madera_gpio_driver_init+0x0/0x4b @ 1 initcall madera_gpio_driver_init+0x0/0x4b returned 0 after 112 usecs calling max77620_gpio_driver_init+0x0/0x4b @ 1 initcall max77620_gpio_driver_init+0x0/0x4b returned 0 after 111 usecs calling mb86s70_gpio_driver_init+0x0/0x4b @ 1 initcall mb86s70_gpio_driver_init+0x0/0x4b returned 0 after 119 usecs calling men_z127_driver_init+0x0/0x50 @ 1 initcall men_z127_driver_init+0x0/0x50 returned 0 after 180 usecs calling gpio_mockup_init+0x0/0x250 @ 1 initcall gpio_mockup_init+0x0/0x250 returned 0 after 145 usecs calling pch_gpio_driver_init+0x0/0x50 @ 1 initcall pch_gpio_driver_init+0x0/0x50 returned 0 after 162 usecs calling idio_16_driver_init+0x0/0x50 @ 1 initcall idio_16_driver_init+0x0/0x50 returned 0 after 143 usecs calling sch311x_gpio_init+0x0/0x1a3 @ 1 initcall sch311x_gpio_init+0x0/0x1a3 returned -19 after 97 usecs calling gpio_sim_init+0x0/0x156 @ 1 initcall gpio_sim_init+0x0/0x156 returned 0 after 532 usecs calling sdv_gpio_driver_init+0x0/0x50 @ 1 initcall sdv_gpio_driver_init+0x0/0x50 returned 0 after 132 usecs calling syscon_gpio_driver_init+0x0/0x4b @ 1 initcall syscon_gpio_driver_init+0x0/0x4b returned 0 after 104 usecs calling tpic2810_driver_init+0x0/0x4b @ 1 initcall tpic2810_driver_init+0x0/0x4b returned 0 after 95 usecs calling tps65086_gpio_driver_init+0x0/0x4b @ 1 initcall tps65086_gpio_driver_init+0x0/0x4b returned 0 after 101 usecs calling virtio_gpio_driver_init+0x0/0x49 @ 1 initcall virtio_gpio_driver_init+0x0/0x49 returned 0 after 86 usecs calling winbond_gpio_idriver_init+0x0/0x4e @ 1 gpio_winbond: chip ID at 2e is ffff gpio_winbond: not an our chip gpio_winbond: chip ID at 4e is ffff gpio_winbond: not an our chip initcall winbond_gpio_idriver_init+0x0/0x4e returned -19 after 3184 usecs calling ws16c48_driver_init+0x0/0xa1 @ 1 initcall ws16c48_driver_init+0x0/0xa1 returned -19 after 152 usecs calling pci_proc_init+0x0/0xe1 @ 1 initcall pci_proc_init+0x0/0xe1 returned 0 after 163 usecs calling pci_stub_init+0x0/0x2a5 @ 1 initcall pci_stub_init+0x0/0x2a5 returned 0 after 155 usecs calling pf_stub_driver_init+0x0/0x50 @ 1 initcall pf_stub_driver_init+0x0/0x50 returned 0 after 147 usecs calling gen_pci_driver_init+0x0/0x4b @ 1 initcall gen_pci_driver_init+0x0/0x4b returned 0 after 116 usecs calling switchtec_init+0x0/0x163 @ 1 switchtec: loaded. initcall switchtec_init+0x0/0x163 returned 0 after 784 usecs calling ams369fg06_driver_init+0x0/0x4b @ 1 initcall ams369fg06_driver_init+0x0/0x4b returned 0 after 95 usecs calling hx8357_driver_init+0x0/0x4b @ 1 SPI driver hx8357 has no spi_device_id for himax,hx8369 initcall hx8357_driver_init+0x0/0x4b returned 0 after 978 usecs calling ili922x_driver_init+0x0/0x4b @ 1 initcall ili922x_driver_init+0x0/0x4b returned 0 after 94 usecs calling lms501kf03_driver_init+0x0/0x4b @ 1 initcall lms501kf03_driver_init+0x0/0x4b returned 0 after 96 usecs calling otm3225a_driver_init+0x0/0x4b @ 1 initcall otm3225a_driver_init+0x0/0x4b returned 0 after 129 usecs calling tdo24m_driver_init+0x0/0x4b @ 1 initcall tdo24m_driver_init+0x0/0x4b returned 0 after 111 usecs calling adp5520_bl_driver_init+0x0/0x4b @ 1 initcall adp5520_bl_driver_init+0x0/0x4b returned 0 after 111 usecs calling adp8860_driver_init+0x0/0x4b @ 1 initcall adp8860_driver_init+0x0/0x4b returned 0 after 99 usecs calling adp8870_driver_init+0x0/0x4b @ 1 initcall adp8870_driver_init+0x0/0x4b returned 0 after 108 usecs calling bd6107_driver_init+0x0/0x4b @ 1 initcall bd6107_driver_init+0x0/0x4b returned 0 after 101 usecs calling da903x_backlight_driver_init+0x0/0x4b @ 1 initcall da903x_backlight_driver_init+0x0/0x4b returned 0 after 101 usecs calling da9052_wled_driver_init+0x0/0x4b @ 1 initcall da9052_wled_driver_init+0x0/0x4b returned 0 after 92 usecs calling gpio_backlight_driver_init+0x0/0x4b @ 1 initcall gpio_backlight_driver_init+0x0/0x4b returned 0 after 98 usecs calling ktd253_backlight_driver_init+0x0/0x4b @ 1 initcall ktd253_backlight_driver_init+0x0/0x4b returned 0 after 97 usecs calling lm3639_i2c_driver_init+0x0/0x4b @ 1 initcall lm3639_i2c_driver_init+0x0/0x4b returned 0 after 196 usecs calling lv5207lp_driver_init+0x0/0x4b @ 1 initcall lv5207lp_driver_init+0x0/0x4b returned 0 after 153 usecs calling wled_driver_init+0x0/0x4b @ 1 initcall wled_driver_init+0x0/0x4b returned 0 after 107 usecs calling sky81452_bl_driver_init+0x0/0x4b @ 1 initcall sky81452_bl_driver_init+0x0/0x4b returned 0 after 122 usecs calling tps65217_bl_driver_init+0x0/0x4b @ 1 initcall tps65217_bl_driver_init+0x0/0x4b returned 0 after 103 usecs calling wm831x_backlight_driver_init+0x0/0x4b @ 1 initcall wm831x_backlight_driver_init+0x0/0x4b returned 0 after 93 usecs calling arcxcnn_driver_init+0x0/0x4b @ 1 initcall arcxcnn_driver_init+0x0/0x4b returned 0 after 97 usecs calling led_bl_driver_init+0x0/0x4b @ 1 initcall led_bl_driver_init+0x0/0x4b returned 0 after 98 usecs calling arcfb_init+0x0/0x14b @ 1 initcall arcfb_init+0x0/0x14b returned -6 after 1 usecs calling pm2fb_init+0x0/0xd1 @ 1 initcall pm2fb_init+0x0/0xd1 returned 0 after 150 usecs calling pm3fb_init+0x0/0xd1 @ 1 initcall pm3fb_init+0x0/0xd1 returned 0 after 177 usecs calling i740fb_init+0x0/0xd0 @ 1 initcall i740fb_init+0x0/0xd0 returned 0 after 251 usecs calling rivafb_init+0x0/0x70 @ 1 rivafb_setup START initcall rivafb_init+0x0/0x70 returned 0 after 615 usecs calling nvidiafb_init+0x0/0x70 @ 1 nvidiafb_setup START initcall nvidiafb_init+0x0/0x70 returned 0 after 637 usecs calling atyfb_init+0x0/0xf7 @ 1 initcall atyfb_init+0x0/0xf7 returned 0 after 129 usecs calling aty128fb_init+0x0/0xb0 @ 1 initcall aty128fb_init+0x0/0xb0 returned 0 after 217 usecs calling sisfb_init+0x0/0xd1 @ 1 initcall sisfb_init+0x0/0xd1 returned 0 after 153 usecs calling via_core_init+0x0/0xac @ 1 VIA Graphics Integration Chipset framebuffer 2.4 initializing initcall via_core_init+0x0/0xac returned 0 after 1241 usecs calling kyrofb_init+0x0/0xd1 @ 1 initcall kyrofb_init+0x0/0xd1 returned 0 after 128 usecs calling savagefb_init+0x0/0x16d @ 1 initcall savagefb_init+0x0/0x16d returned 0 after 122 usecs calling neofb_init+0x0/0xd1 @ 1 initcall neofb_init+0x0/0xd1 returned 0 after 189 usecs calling imsttfb_init+0x0/0xd1 @ 1 initcall imsttfb_init+0x0/0xd1 returned 0 after 146 usecs calling vt8623fb_init+0x0/0x167 @ 1 initcall vt8623fb_init+0x0/0x167 returned 0 after 162 usecs calling arkfb_init+0x0/0x167 @ 1 initcall arkfb_init+0x0/0x167 returned 0 after 168 usecs calling sstfb_init+0x0/0xb0 @ 1 initcall sstfb_init+0x0/0xb0 returned 0 after 162 usecs calling goldfish_fb_driver_init+0x0/0x4b @ 1 initcall goldfish_fb_driver_init+0x0/0x4b returned 0 after 111 usecs calling cirrusfb_init+0x0/0xd1 @ 1 initcall cirrusfb_init+0x0/0xd1 returned 0 after 144 usecs calling s1d13xxxfb_init+0x0/0x8d @ 1 initcall s1d13xxxfb_init+0x0/0x8d returned 0 after 110 usecs calling sm501fb_driver_init+0x0/0x4b @ 1 initcall sm501fb_driver_init+0x0/0x4b returned 0 after 98 usecs calling carminefb_init+0x0/0x98 @ 1 initcall carminefb_init+0x0/0x98 returned 0 after 240 usecs calling mb862xxfb_init+0x0/0x40 @ 1 initcall mb862xxfb_init+0x0/0x40 returned 0 after 129 usecs calling vesafb_driver_init+0x0/0x4b @ 1 initcall vesafb_driver_init+0x0/0x4b returned 0 after 103 usecs calling ssd1307fb_driver_init+0x0/0x4b @ 1 initcall ssd1307fb_driver_init+0x0/0x4b returned 0 after 99 usecs calling vfb_init+0x0/0x2dd @ 1 initcall vfb_init+0x0/0x2dd returned -6 after 2 usecs calling ipmb_driver_init+0x0/0x4b @ 1 initcall ipmb_driver_init+0x0/0x4b returned 0 after 111 usecs calling ged_driver_init+0x0/0x4b @ 1 initcall ged_driver_init+0x0/0x4b returned 0 after 117 usecs calling acpi_ac_init+0x0/0xd8 @ 1 initcall acpi_ac_init+0x0/0xd8 returned 0 after 343 usecs calling acpi_button_driver_init+0x0/0xc1 @ 1 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: button: Power Button [PWRF] initcall acpi_button_driver_init+0x0/0xc1 returned 0 after 2639 usecs calling acpi_fan_driver_init+0x0/0x4b @ 1 initcall acpi_fan_driver_init+0x0/0x4b returned 0 after 184 usecs calling acpi_processor_driver_init+0x0/0x1a5 @ 1 initcall acpi_processor_driver_init+0x0/0x1a5 returned 0 after 1031 usecs calling acpi_thermal_init+0x0/0x11b @ 1 initcall acpi_thermal_init+0x0/0x11b returned 0 after 640 usecs calling acpi_battery_init+0x0/0x8a @ 1 initcall acpi_battery_init+0x0/0x8a returned 0 after 27 usecs calling of_fixed_factor_clk_driver_init+0x0/0x4b @ 1 initcall of_fixed_factor_clk_driver_init+0x0/0x4b returned 0 after 579 usecs calling of_fixed_clk_driver_init+0x0/0x4b @ 1 initcall of_fixed_clk_driver_init+0x0/0x4b returned 0 after 109 usecs calling gpio_clk_driver_init+0x0/0x4b @ 1 initcall gpio_clk_driver_init+0x0/0x4b returned 0 after 97 usecs calling lmk04832_driver_init+0x0/0x4b @ 1 initcall lmk04832_driver_init+0x0/0x4b returned 0 after 89 usecs calling max77686_clk_driver_init+0x0/0x4b @ 1 initcall max77686_clk_driver_init+0x0/0x4b returned 0 after 108 usecs calling max9485_driver_init+0x0/0x4b @ 1 initcall max9485_driver_init+0x0/0x4b returned 0 after 94 usecs calling s2mps11_clk_driver_init+0x0/0x4b @ 1 initcall s2mps11_clk_driver_init+0x0/0x4b returned 0 after 172 usecs calling si5341_driver_init+0x0/0x4b @ 1 initcall si5341_driver_init+0x0/0x4b returned 0 after 103 usecs calling si514_driver_init+0x0/0x4b @ 1 initcall si514_driver_init+0x0/0x4b returned 0 after 86 usecs calling si544_driver_init+0x0/0x4b @ 1 initcall si544_driver_init+0x0/0x4b returned 0 after 182 usecs calling si570_driver_init+0x0/0x4b @ 1 initcall si570_driver_init+0x0/0x4b returned 0 after 88 usecs calling rs9_driver_init+0x0/0x4b @ 1 initcall rs9_driver_init+0x0/0x4b returned 0 after 98 usecs calling vc5_driver_init+0x0/0x4b @ 1 initcall vc5_driver_init+0x0/0x4b returned 0 after 107 usecs calling vc7_i2c_driver_init+0x0/0x4b @ 1 initcall vc7_i2c_driver_init+0x0/0x4b returned 0 after 126 usecs calling wm831x_clk_driver_init+0x0/0x4b @ 1 initcall wm831x_clk_driver_init+0x0/0x4b returned 0 after 142 usecs calling lgm_cgu_driver_init+0x0/0x4b @ 1 initcall lgm_cgu_driver_init+0x0/0x4b returned 0 after 96 usecs calling xvcu_driver_init+0x0/0x4b @ 1 initcall xvcu_driver_init+0x0/0x4b returned 0 after 97 usecs calling litex_soc_ctrl_driver_init+0x0/0x4b @ 1 initcall litex_soc_ctrl_driver_init+0x0/0x4b returned 0 after 116 usecs calling virtio_mmio_init+0x0/0x4b @ 1 initcall virtio_mmio_init+0x0/0x4b returned 0 after 106 usecs calling virtio_balloon_driver_init+0x0/0x49 @ 1 initcall virtio_balloon_driver_init+0x0/0x49 returned 0 after 83 usecs calling virtio_input_driver_init+0x0/0x49 @ 1 initcall virtio_input_driver_init+0x0/0x49 returned 0 after 98 usecs calling pg86x_regulator_driver_init+0x0/0x4b @ 1 initcall pg86x_regulator_driver_init+0x0/0x4b returned 0 after 97 usecs calling cpcap_regulator_driver_init+0x0/0x4b @ 1 initcall cpcap_regulator_driver_init+0x0/0x4b returned 0 after 110 usecs calling act8865_pmic_driver_init+0x0/0x4b @ 1 initcall act8865_pmic_driver_init+0x0/0x4b returned 0 after 102 usecs calling act8945a_pmic_driver_init+0x0/0x4b @ 1 initcall act8945a_pmic_driver_init+0x0/0x4b returned 0 after 113 usecs calling atc260x_regulator_driver_init+0x0/0x4b @ 1 initcall atc260x_regulator_driver_init+0x0/0x4b returned 0 after 107 usecs calling bd9571mwv_regulator_driver_init+0x0/0x4b @ 1 initcall bd9571mwv_regulator_driver_init+0x0/0x4b returned 0 after 104 usecs calling da9121_regulator_driver_init+0x0/0x4b @ 1 initcall da9121_regulator_driver_init+0x0/0x4b returned 0 after 108 usecs calling da9210_regulator_driver_init+0x0/0x4b @ 1 initcall da9210_regulator_driver_init+0x0/0x4b returned 0 after 96 usecs calling da9211_regulator_driver_init+0x0/0x4b @ 1 initcall da9211_regulator_driver_init+0x0/0x4b returned 0 after 88 usecs calling fan53555_regulator_driver_init+0x0/0x4b @ 1 initcall fan53555_regulator_driver_init+0x0/0x4b returned 0 after 94 usecs calling fan53880_regulator_driver_init+0x0/0x4b @ 1 initcall fan53880_regulator_driver_init+0x0/0x4b returned 0 after 92 usecs calling hi6421_regulator_driver_init+0x0/0x4b @ 1 initcall hi6421_regulator_driver_init+0x0/0x4b returned 0 after 110 usecs calling hi6421v530_regulator_driver_init+0x0/0x4b @ 1 initcall hi6421v530_regulator_driver_init+0x0/0x4b returned 0 after 102 usecs calling hi6421_spmi_regulator_driver_init+0x0/0x4b @ 1 initcall hi6421_spmi_regulator_driver_init+0x0/0x4b returned 0 after 106 usecs calling isl9305_regulator_driver_init+0x0/0x4b @ 1 initcall isl9305_regulator_driver_init+0x0/0x4b returned 0 after 147 usecs calling lp3971_i2c_driver_init+0x0/0x4b @ 1 initcall lp3971_i2c_driver_init+0x0/0x4b returned 0 after 186 usecs calling lp872x_driver_init+0x0/0x4b @ 1 initcall lp872x_driver_init+0x0/0x4b returned 0 after 105 usecs calling lp873x_regulator_driver_init+0x0/0x4b @ 1 initcall lp873x_regulator_driver_init+0x0/0x4b returned 0 after 108 usecs calling ltc3589_driver_init+0x0/0x4b @ 1 initcall ltc3589_driver_init+0x0/0x4b returned 0 after 91 usecs calling ltc3676_driver_init+0x0/0x4b @ 1 initcall ltc3676_driver_init+0x0/0x4b returned 0 after 96 usecs calling max77620_regulator_driver_init+0x0/0x4b @ 1 initcall max77620_regulator_driver_init+0x0/0x4b returned 0 after 103 usecs calling max8893_driver_init+0x0/0x4b @ 1 initcall max8893_driver_init+0x0/0x4b returned 0 after 95 usecs calling max20086_regulator_driver_init+0x0/0x4b @ 1 initcall max20086_regulator_driver_init+0x0/0x4b returned 0 after 88 usecs calling max77686_pmic_driver_init+0x0/0x4b @ 1 initcall max77686_pmic_driver_init+0x0/0x4b returned 0 after 138 usecs calling max77802_pmic_driver_init+0x0/0x4b @ 1 initcall max77802_pmic_driver_init+0x0/0x4b returned 0 after 118 usecs calling max77826_regulator_driver_init+0x0/0x4b @ 1 initcall max77826_regulator_driver_init+0x0/0x4b returned 0 after 113 usecs calling mcp16502_drv_init+0x0/0x4b @ 1 initcall mcp16502_drv_init+0x0/0x4b returned 0 after 95 usecs calling mp5416_regulator_driver_init+0x0/0x4b @ 1 initcall mp5416_regulator_driver_init+0x0/0x4b returned 0 after 98 usecs calling mp8859_regulator_driver_init+0x0/0x4b @ 1 initcall mp8859_regulator_driver_init+0x0/0x4b returned 0 after 103 usecs calling mp886x_regulator_driver_init+0x0/0x4b @ 1 initcall mp886x_regulator_driver_init+0x0/0x4b returned 0 after 91 usecs calling mt6315_regulator_driver_init+0x0/0x4b @ 1 initcall mt6315_regulator_driver_init+0x0/0x4b returned 0 after 113 usecs calling mt6360_regulator_driver_init+0x0/0x4b @ 1 initcall mt6360_regulator_driver_init+0x0/0x4b returned 0 after 111 usecs calling mt6370_regulator_driver_init+0x0/0x4b @ 1 initcall mt6370_regulator_driver_init+0x0/0x4b returned 0 after 99 usecs calling qcom_labibb_regulator_driver_init+0x0/0x4b @ 1 initcall qcom_labibb_regulator_driver_init+0x0/0x4b returned 0 after 102 usecs calling qcom_spmi_regulator_driver_init+0x0/0x4b @ 1 initcall qcom_spmi_regulator_driver_init+0x0/0x4b returned 0 after 111 usecs calling qcom_usb_vbus_regulator_driver_init+0x0/0x4b @ 1 initcall qcom_usb_vbus_regulator_driver_init+0x0/0x4b returned 0 after 112 usecs calling pf8x00_regulator_driver_init+0x0/0x4b @ 1 initcall pf8x00_regulator_driver_init+0x0/0x4b returned 0 after 105 usecs calling pfuze_driver_init+0x0/0x4b @ 1 initcall pfuze_driver_init+0x0/0x4b returned 0 after 123 usecs calling pv88060_regulator_driver_init+0x0/0x4b @ 1 initcall pv88060_regulator_driver_init+0x0/0x4b returned 0 after 94 usecs calling attiny_regulator_driver_init+0x0/0x4b @ 1 initcall attiny_regulator_driver_init+0x0/0x4b returned 0 after 92 usecs calling rn5t618_regulator_driver_init+0x0/0x4b @ 1 initcall rn5t618_regulator_driver_init+0x0/0x4b returned 0 after 116 usecs calling rt4801_driver_init+0x0/0x4b @ 1 initcall rt4801_driver_init+0x0/0x4b returned 0 after 155 usecs calling rt5033_regulator_driver_init+0x0/0x4b @ 1 initcall rt5033_regulator_driver_init+0x0/0x4b returned 0 after 181 usecs calling rt5190a_driver_init+0x0/0x4b @ 1 initcall rt5190a_driver_init+0x0/0x4b returned 0 after 174 usecs calling rt6160_driver_init+0x0/0x4b @ 1 initcall rt6160_driver_init+0x0/0x4b returned 0 after 110 usecs calling rtmv20_driver_init+0x0/0x4b @ 1 initcall rtmv20_driver_init+0x0/0x4b returned 0 after 116 usecs calling rtq6752_driver_init+0x0/0x4b @ 1 initcall rtq6752_driver_init+0x0/0x4b returned 0 after 111 usecs calling s2mpa01_pmic_driver_init+0x0/0x4b @ 1 initcall s2mpa01_pmic_driver_init+0x0/0x4b returned 0 after 109 usecs calling s2mps11_pmic_driver_init+0x0/0x4b @ 1 initcall s2mps11_pmic_driver_init+0x0/0x4b returned 0 after 112 usecs calling sky81452_reg_driver_init+0x0/0x4b @ 1 initcall sky81452_reg_driver_init+0x0/0x4b returned 0 after 156 usecs calling slg51000_regulator_driver_init+0x0/0x4b @ 1 initcall slg51000_regulator_driver_init+0x0/0x4b returned 0 after 175 usecs calling stpmic1_regulator_driver_init+0x0/0x4b @ 1 initcall stpmic1_regulator_driver_init+0x0/0x4b returned 0 after 119 usecs calling sy7636a_regulator_driver_init+0x0/0x4b @ 1 initcall sy7636a_regulator_driver_init+0x0/0x4b returned 0 after 116 usecs calling sy8106a_regulator_driver_init+0x0/0x4b @ 1 initcall sy8106a_regulator_driver_init+0x0/0x4b returned 0 after 106 usecs calling sy8827n_regulator_driver_init+0x0/0x4b @ 1 initcall sy8827n_regulator_driver_init+0x0/0x4b returned 0 after 103 usecs calling tps65086_regulator_driver_init+0x0/0x4b @ 1 initcall tps65086_regulator_driver_init+0x0/0x4b returned 0 after 147 usecs calling pmic_driver_init+0x0/0x4b @ 1 initcall pmic_driver_init+0x0/0x4b returned 0 after 136 usecs calling tps65912_regulator_driver_init+0x0/0x4b @ 1 initcall tps65912_regulator_driver_init+0x0/0x4b returned 0 after 110 usecs calling tps65132_i2c_driver_init+0x0/0x4b @ 1 initcall tps65132_i2c_driver_init+0x0/0x4b returned 0 after 173 usecs calling vctrl_driver_init+0x0/0x4b @ 1 initcall vctrl_driver_init+0x0/0x4b returned 0 after 106 usecs calling wm8994_ldo_driver_init+0x0/0x4b @ 1 initcall wm8994_ldo_driver_init+0x0/0x4b returned 0 after 119 usecs calling tps380x_reset_driver_init+0x0/0x4b @ 1 initcall tps380x_reset_driver_init+0x0/0x4b returned 0 after 105 usecs calling n_null_init+0x0/0x79 @ 1 initcall n_null_init+0x0/0x79 returned 0 after 3 usecs calling pty_init+0x0/0x58 @ 1 initcall pty_init+0x0/0x58 returned 0 after 173498 usecs calling sysrq_init+0x0/0x123 @ 1 initcall sysrq_init+0x0/0x123 returned 0 after 75 usecs calling n_hdlc_init+0x0/0xcd @ 1 N_HDLC line discipline registered with maxframe=4096 initcall n_hdlc_init+0x0/0xcd returned 0 after 825 usecs calling serial8250_init+0x0/0x39f @ 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial 00:04: GPIO lookup for consumer rs485-term serial 00:04: using ACPI for GPIO lookup acpi PNP0501:00: GPIO: looking up rs485-term-gpios acpi PNP0501:00: GPIO: looking up rs485-term-gpio serial 00:04: using lookup tables for GPIO lookup serial 00:04: No GPIO consumer rs485-term found 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A serial 00:05: GPIO lookup for consumer rs485-term serial 00:05: using ACPI for GPIO lookup acpi PNP0501:01: GPIO: looking up rs485-term-gpios acpi PNP0501:01: GPIO: looking up rs485-term-gpio serial 00:05: using lookup tables for GPIO lookup serial 00:05: No GPIO consumer rs485-term found 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A initcall serial8250_init+0x0/0x39f returned 0 after 17201 usecs calling serial_cs_driver_init+0x0/0x49 @ 1 initcall serial_cs_driver_init+0x0/0x49 returned 0 after 152 usecs calling pericom8250_pci_driver_init+0x0/0x50 @ 1 initcall pericom8250_pci_driver_init+0x0/0x50 returned 0 after 155 usecs calling of_platform_serial_driver_init+0x0/0x4b @ 1 initcall of_platform_serial_driver_init+0x0/0x4b returned 0 after 94 usecs calling sc16is7xx_init+0x0/0xfc @ 1 initcall sc16is7xx_init+0x0/0xfc returned 0 after 191 usecs calling jsm_init_module+0x0/0xc7 @ 1 initcall jsm_init_module+0x0/0xc7 returned 0 after 326 usecs calling ulite_init+0x0/0xac @ 1 initcall ulite_init+0x0/0xac returned 0 after 95 usecs calling altera_uart_init+0x0/0xc2 @ 1 initcall altera_uart_init+0x0/0xc2 returned 0 after 161 usecs calling altera_jtaguart_init+0x0/0xc2 @ 1 initcall altera_jtaguart_init+0x0/0xc2 returned 0 after 172 usecs calling pch_uart_module_init+0x0/0xc7 @ 1 initcall pch_uart_module_init+0x0/0xc7 returned 0 after 220 usecs calling init_lqasc+0x0/0xc2 @ 1 initcall init_lqasc+0x0/0xc2 returned 0 after 175 usecs calling arc_serial_init+0x0/0xbf @ 1 initcall arc_serial_init+0x0/0xbf returned 0 after 131 usecs calling digicolor_uart_init+0x0/0xd5 @ 1 initcall digicolor_uart_init+0x0/0xd5 returned 0 after 135 usecs calling sifive_serial_init+0x0/0xc2 @ 1 initcall sifive_serial_init+0x0/0xc2 returned 0 after 139 usecs calling moxa_init+0x0/0x615 @ 1 MOXA Intellio family driver version 6.0k initcall moxa_init+0x0/0x615 returned 0 after 924 usecs calling mxser_module_init+0x0/0x1a5 @ 1 initcall mxser_module_init+0x0/0x1a5 returned 0 after 130 usecs calling nozomi_init+0x0/0x1aa @ 1 initcall nozomi_init+0x0/0x1aa returned 0 after 175 usecs calling ttynull_init+0x0/0x17f @ 1 initcall ttynull_init+0x0/0x17f returned 0 after 407 usecs calling slgt_init+0x0/0x2bd @ 1 SyncLink GT SyncLink GT, tty major#235 SyncLink GT no devices found initcall slgt_init+0x0/0x2bd returned 0 after 1740 usecs calling goldfish_tty_platform_driver_init+0x0/0x4b @ 1 initcall goldfish_tty_platform_driver_init+0x0/0x4b returned 0 after 96 usecs calling rpmsg_tty_init+0x0/0x19d @ 1 initcall rpmsg_tty_init+0x0/0x19d returned 0 after 113 usecs calling random_sysctls_init+0x0/0x54 @ 1 initcall random_sysctls_init+0x0/0x54 returned 0 after 41 usecs calling ttyprintk_init+0x0/0x1c6 @ 1 initcall ttyprintk_init+0x0/0x1c6 returned 0 after 455 usecs calling virtio_console_init+0x0/0x1df @ 1 initcall virtio_console_init+0x0/0x1df returned 0 after 161 usecs calling lp_init_module+0x0/0x334 @ 1 kworker/u4:1 (59) used greatest stack depth: 6528 bytes left lp: driver loaded but no devices found initcall lp_init_module+0x0/0x334 returned 0 after 3329 usecs calling applicom_init+0x0/0xccf @ 1 Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ ac.o: No PCI boards found. ac.o: For an ISA board you must supply memory and irq parameters. initcall applicom_init+0x0/0xccf returned -6 after 2551 usecs calling nvram_module_init+0x0/0x164 @ 1 Non-volatile memory driver v1.3 initcall nvram_module_init+0x0/0x164 returned 0 after 1098 usecs calling toshiba_init+0x0/0x25d @ 1 toshiba: not a supported Toshiba laptop initcall toshiba_init+0x0/0x25d returned -19 after 769 usecs calling timeriomem_rng_driver_init+0x0/0x4b @ 1 initcall timeriomem_rng_driver_init+0x0/0x4b returned 0 after 331 usecs calling intel_rng_mod_init+0x0/0x41b @ 1 initcall intel_rng_mod_init+0x0/0x41b returned -19 after 318 usecs calling via_rng_mod_init+0x0/0xcf @ 1 initcall via_rng_mod_init+0x0/0xcf returned -19 after 1 usecs calling virtio_rng_driver_init+0x0/0x49 @ 1 initcall virtio_rng_driver_init+0x0/0x49 returned 0 after 115 usecs calling xiphera_trng_driver_init+0x0/0x4b @ 1 initcall xiphera_trng_driver_init+0x0/0x4b returned 0 after 200 usecs calling pc8736x_gpio_init+0x0/0x670 @ 1 platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing platform pc8736x_gpio.0: no device found initcall pc8736x_gpio_init+0x0/0x670 returned -19 after 2398 usecs calling nsc_gpio_init+0x0/0x4c @ 1 nsc_gpio initializing initcall nsc_gpio_init+0x0/0x4c returned 0 after 517 usecs calling mwave_init+0x0/0x502 @ 1 smapi::smapi_init, ERROR invalid usSmapiID mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine mwave: mwavedd::mwave_init: Error: Failed to initialize board data mwave: mwavedd::mwave_init: Error: Failed to initialize initcall mwave_init+0x0/0x502 returned -5 after 4027 usecs calling cmm_init+0x0/0x182 @ 1 initcall cmm_init+0x0/0x182 returned 0 after 200 usecs calling scr24x_init+0x0/0x154 @ 1 initcall scr24x_init+0x0/0x154 returned 0 after 132 usecs calling hangcheck_init+0x0/0xd7 @ 1 Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). initcall hangcheck_init+0x0/0xd7 returned 0 after 1170 usecs calling xillybus_class_init+0x0/0x9d @ 1 initcall xillybus_class_init+0x0/0x9d returned 0 after 60 usecs calling xillyusb_init+0x0/0x5a @ 1 usbcore: registered new interface driver xillyusb initcall xillyusb_init+0x0/0x5a returned 0 after 1017 usecs calling drm_core_init+0x0/0x207 @ 1 ACPI: bus type drm_connector registered initcall drm_core_init+0x0/0x207 returned 0 after 778 usecs calling komeda_platform_driver_init+0x0/0xa2 @ 1 initcall komeda_platform_driver_init+0x0/0xa2 returned 0 after 101 usecs calling drm_display_helper_module_init+0x0/0x44 @ 1 initcall drm_display_helper_module_init+0x0/0x44 returned 0 after 60 usecs calling drm_sched_fence_slab_init+0x0/0x8a @ 1 initcall drm_sched_fence_slab_init+0x0/0x8a returned 0 after 7 usecs calling tdfx_init+0x0/0x4e @ 1 initcall tdfx_init+0x0/0x4e returned 0 after 60 usecs calling mga_init+0x0/0x58 @ 1 initcall mga_init+0x0/0x58 returned 0 after 41 usecs calling vgem_init+0x0/0x260 @ 1 [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 initcall vgem_init+0x0/0x260 returned 0 after 3111 usecs calling ast_pci_driver_init+0x0/0xf5 @ 1 initcall ast_pci_driver_init+0x0/0xf5 returned 0 after 187 usecs calling rcar_dw_hdmi_platform_driver_init+0x0/0x4b @ 1 initcall rcar_dw_hdmi_platform_driver_init+0x0/0x4b returned 0 after 119 usecs calling qxl_pci_driver_init+0x0/0xf5 @ 1 initcall qxl_pci_driver_init+0x0/0xf5 returned 0 after 233 usecs calling boe_bf060y8m_aj0_driver_init+0x0/0x4b @ 1 initcall boe_bf060y8m_aj0_driver_init+0x0/0x4b returned 0 after 87 usecs calling panel_driver_init+0x0/0x4b @ 1 initcall panel_driver_init+0x0/0x4b returned 0 after 157 usecs calling boe_panel_driver_init+0x0/0x4b @ 1 initcall boe_panel_driver_init+0x0/0x4b returned 0 after 95 usecs calling dsicm_driver_init+0x0/0x4b @ 1 initcall dsicm_driver_init+0x0/0x4b returned 0 after 87 usecs calling panel_lvds_driver_init+0x0/0x4b @ 1 initcall panel_lvds_driver_init+0x0/0x4b returned 0 after 112 usecs calling kd35t133_driver_init+0x0/0x4b @ 1 initcall kd35t133_driver_init+0x0/0x4b returned 0 after 91 usecs calling ej030na_driver_init+0x0/0x4b @ 1 SPI driver panel-innolux-ej030na has no spi_device_id for innolux,ej030na initcall ej030na_driver_init+0x0/0x4b returned 0 after 1360 usecs calling innolux_panel_driver_init+0x0/0x4b @ 1 initcall innolux_panel_driver_init+0x0/0x4b returned 0 after 91 usecs calling khadas_ts050_panel_driver_init+0x0/0x4b @ 1 initcall khadas_ts050_panel_driver_init+0x0/0x4b returned 0 after 89 usecs calling kingdisplay_panel_driver_init+0x0/0x4b @ 1 initcall kingdisplay_panel_driver_init+0x0/0x4b returned 0 after 94 usecs calling lb035q02_driver_init+0x0/0x4b @ 1 initcall lb035q02_driver_init+0x0/0x4b returned 0 after 91 usecs calling lg4573_driver_init+0x0/0x4b @ 1 initcall lg4573_driver_init+0x0/0x4b returned 0 after 165 usecs calling nl8048_driver_init+0x0/0x4b @ 1 initcall nl8048_driver_init+0x0/0x4b returned 0 after 97 usecs calling nv3052c_driver_init+0x0/0x4b @ 1 SPI driver nv3052c has no spi_device_id for leadtek,ltk035c5444t initcall nv3052c_driver_init+0x0/0x4b returned 0 after 1040 usecs calling nt35510_driver_init+0x0/0x4b @ 1 initcall nt35510_driver_init+0x0/0x4b returned 0 after 90 usecs calling nt35560_driver_init+0x0/0x4b @ 1 initcall nt35560_driver_init+0x0/0x4b returned 0 after 93 usecs calling nt39016_driver_init+0x0/0x4b @ 1 SPI driver nt39016 has no spi_device_id for kingdisplay,kd035g6-54nt initcall nt39016_driver_init+0x0/0x4b returned 0 after 1088 usecs calling mantix_driver_init+0x0/0x4b @ 1 initcall mantix_driver_init+0x0/0x4b returned 0 after 96 usecs calling lcd_olinuxino_driver_init+0x0/0x4b @ 1 initcall lcd_olinuxino_driver_init+0x0/0x4b returned 0 after 188 usecs calling wuxga_nt_panel_driver_init+0x0/0x4b @ 1 initcall wuxga_nt_panel_driver_init+0x0/0x4b returned 0 after 92 usecs calling rad_panel_driver_init+0x0/0x4b @ 1 initcall rad_panel_driver_init+0x0/0x4b returned 0 after 160 usecs calling raydium_rm68200_driver_init+0x0/0x4b @ 1 initcall raydium_rm68200_driver_init+0x0/0x4b returned 0 after 182 usecs calling rb070d30_panel_driver_init+0x0/0x4b @ 1 initcall rb070d30_panel_driver_init+0x0/0x4b returned 0 after 86 usecs calling db7430_driver_init+0x0/0x4b @ 1 SPI driver db7430-panel has no spi_device_id for samsung,lms397kf04 initcall db7430_driver_init+0x0/0x4b returned 0 after 1088 usecs calling ld9040_driver_init+0x0/0x4b @ 1 initcall ld9040_driver_init+0x0/0x4b returned 0 after 96 usecs calling s6d16d0_driver_init+0x0/0x4b @ 1 initcall s6d16d0_driver_init+0x0/0x4b returned 0 after 90 usecs calling s6e3ha2_driver_init+0x0/0x4b @ 1 initcall s6e3ha2_driver_init+0x0/0x4b returned 0 after 89 usecs calling s6e63j0x03_driver_init+0x0/0x4b @ 1 initcall s6e63j0x03_driver_init+0x0/0x4b returned 0 after 86 usecs calling s6e88a0_ams452ef01_driver_init+0x0/0x4b @ 1 initcall s6e88a0_ams452ef01_driver_init+0x0/0x4b returned 0 after 91 usecs calling sofef00_panel_driver_init+0x0/0x4b @ 1 initcall sofef00_panel_driver_init+0x0/0x4b returned 0 after 102 usecs calling seiko_panel_platform_driver_init+0x0/0x4b @ 1 initcall seiko_panel_platform_driver_init+0x0/0x4b returned 0 after 125 usecs calling sharp_nt_panel_driver_init+0x0/0x4b @ 1 initcall sharp_nt_panel_driver_init+0x0/0x4b returned 0 after 107 usecs calling sharp_ls060_driver_init+0x0/0x4b @ 1 initcall sharp_ls060_driver_init+0x0/0x4b returned 0 after 98 usecs calling st7701_dsi_driver_init+0x0/0x4b @ 1 initcall st7701_dsi_driver_init+0x0/0x4b returned 0 after 91 usecs calling st7703_driver_init+0x0/0x4b @ 1 initcall st7703_driver_init+0x0/0x4b returned 0 after 96 usecs calling tdo_tl070wsh30_panel_driver_init+0x0/0x4b @ 1 initcall tdo_tl070wsh30_panel_driver_init+0x0/0x4b returned 0 after 93 usecs calling td028ttec1_driver_init+0x0/0x4b @ 1 initcall td028ttec1_driver_init+0x0/0x4b returned 0 after 94 usecs calling td043mtea1_driver_init+0x0/0x4b @ 1 initcall td043mtea1_driver_init+0x0/0x4b returned 0 after 88 usecs calling truly_nt35597_driver_init+0x0/0x4b @ 1 initcall truly_nt35597_driver_init+0x0/0x4b returned 0 after 96 usecs calling ws2401_driver_init+0x0/0x4b @ 1 SPI driver ws2401-panel has no spi_device_id for samsung,lms380kf01 initcall ws2401_driver_init+0x0/0x4b returned 0 after 1096 usecs calling xpp055c272_driver_init+0x0/0x4b @ 1 initcall xpp055c272_driver_init+0x0/0x4b returned 0 after 95 usecs calling cdns_dsi_platform_driver_init+0x0/0x4b @ 1 initcall cdns_dsi_platform_driver_init+0x0/0x4b returned 0 after 133 usecs calling chipone_init+0x0/0x65 @ 1 initcall chipone_init+0x0/0x65 returned 0 after 185 usecs calling ch7033_driver_init+0x0/0x4b @ 1 initcall ch7033_driver_init+0x0/0x4b returned 0 after 192 usecs calling display_connector_driver_init+0x0/0x4b @ 1 initcall display_connector_driver_init+0x0/0x4b returned 0 after 124 usecs calling lt8912_i2c_driver_init+0x0/0x4b @ 1 initcall lt8912_i2c_driver_init+0x0/0x4b returned 0 after 97 usecs calling lt9211_driver_init+0x0/0x4b @ 1 initcall lt9211_driver_init+0x0/0x4b returned 0 after 164 usecs calling lt9611_driver_init+0x0/0x4b @ 1 initcall lt9611_driver_init+0x0/0x4b returned 0 after 133 usecs calling lvds_codec_driver_init+0x0/0x4b @ 1 initcall lvds_codec_driver_init+0x0/0x4b returned 0 after 120 usecs calling stdpxxxx_ge_b850v3_init+0x0/0x88 @ 1 initcall stdpxxxx_ge_b850v3_init+0x0/0x88 returned 0 after 181 usecs calling ps8640_driver_init+0x0/0x4b @ 1 initcall ps8640_driver_init+0x0/0x4b returned 0 after 93 usecs calling sii8620_driver_init+0x0/0x4b @ 1 initcall sii8620_driver_init+0x0/0x4b returned 0 after 92 usecs calling sii9234_driver_init+0x0/0x4b @ 1 initcall sii9234_driver_init+0x0/0x4b returned 0 after 107 usecs calling simple_bridge_driver_init+0x0/0x4b @ 1 initcall simple_bridge_driver_init+0x0/0x4b returned 0 after 135 usecs calling thc63_driver_init+0x0/0x4b @ 1 initcall thc63_driver_init+0x0/0x4b returned 0 after 118 usecs calling tc358762_driver_init+0x0/0x4b @ 1 initcall tc358762_driver_init+0x0/0x4b returned 0 after 92 usecs calling adv7511_init+0x0/0xc4 @ 1 initcall adv7511_init+0x0/0xc4 returned 0 after 179 usecs calling dlpc3433_driver_init+0x0/0x4b @ 1 initcall dlpc3433_driver_init+0x0/0x4b returned 0 after 241 usecs calling sn65dsi83_driver_init+0x0/0x4b @ 1 initcall sn65dsi83_driver_init+0x0/0x4b returned 0 after 120 usecs calling ti_sn65dsi86_init+0x0/0x21e @ 1 initcall ti_sn65dsi86_init+0x0/0x21e returned 0 after 603 usecs calling tfp410_module_init+0x0/0x12d @ 1 initcall tfp410_module_init+0x0/0x12d returned 0 after 206 usecs calling tpd12s015_driver_init+0x0/0x4b @ 1 initcall tpd12s015_driver_init+0x0/0x4b returned 0 after 115 usecs calling nwl_dsi_driver_init+0x0/0x4b @ 1 initcall nwl_dsi_driver_init+0x0/0x4b returned 0 after 243 usecs calling it66121_driver_init+0x0/0x4b @ 1 initcall it66121_driver_init+0x0/0x4b returned 0 after 246 usecs calling anx6345_driver_init+0x0/0x4b @ 1 initcall anx6345_driver_init+0x0/0x4b returned 0 after 106 usecs calling anx7625_driver_init+0x0/0x4b @ 1 initcall anx7625_driver_init+0x0/0x4b returned 0 after 103 usecs calling anx78xx_driver_init+0x0/0x4b @ 1 initcall anx78xx_driver_init+0x0/0x4b returned 0 after 96 usecs calling mhdp_driver_init+0x0/0x4b @ 1 initcall mhdp_driver_init+0x0/0x4b returned 0 after 117 usecs calling etnaviv_init+0x0/0x229 @ 1 initcall etnaviv_init+0x0/0x229 returned 0 after 197 usecs calling mxsfb_platform_driver_init+0x0/0xa2 @ 1 initcall mxsfb_platform_driver_init+0x0/0xa2 returned 0 after 104 usecs calling arcpgu_platform_driver_init+0x0/0xa2 @ 1 initcall arcpgu_platform_driver_init+0x0/0xa2 returned 0 after 108 usecs calling bochs_pci_driver_init+0x0/0xf5 @ 1 [drm] Found bochs VGA, ID 0xb0c5. [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebf0000. [drm] Found EDID data blob. [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 1 bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device initcall bochs_pci_driver_init+0x0/0xf5 returned 0 after 21788 usecs calling gm12u320_usb_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver gm12u320 initcall gm12u320_usb_driver_init+0x0/0x50 returned 0 after 1041 usecs calling panel_mipi_dbi_spi_driver_init+0x0/0x4b @ 1 initcall panel_mipi_dbi_spi_driver_init+0x0/0x4b returned 0 after 110 usecs calling simpledrm_platform_driver_init+0x0/0x4b @ 1 initcall simpledrm_platform_driver_init+0x0/0x4b returned 0 after 106 usecs calling ili9163_spi_driver_init+0x0/0x4b @ 1 SPI driver ili9163 has no spi_device_id for newhaven,1.8-128160EF initcall ili9163_spi_driver_init+0x0/0x4b returned 0 after 1049 usecs calling ili9486_spi_driver_init+0x0/0x4b @ 1 SPI driver ili9486 has no spi_device_id for waveshare,rpi-lcd-35 SPI driver ili9486 has no spi_device_id for ozzmaker,piscreen initcall ili9486_spi_driver_init+0x0/0x4b returned 0 after 2117 usecs calling mi0283qt_spi_driver_init+0x0/0x4b @ 1 initcall mi0283qt_spi_driver_init+0x0/0x4b returned 0 after 83 usecs calling repaper_spi_driver_init+0x0/0x4b @ 1 initcall repaper_spi_driver_init+0x0/0x4b returned 0 after 123 usecs calling st7735r_spi_driver_init+0x0/0x4b @ 1 initcall st7735r_spi_driver_init+0x0/0x4b returned 0 after 76 usecs calling vbox_pci_driver_init+0x0/0xf4 @ 1 initcall vbox_pci_driver_init+0x0/0xf4 returned 0 after 174 usecs calling gud_usb_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver gud initcall gud_usb_driver_init+0x0/0x50 returned 0 after 983 usecs calling parport_pc_init+0x0/0x31d @ 1 parport_pc 00:03: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA initcall parport_pc_init+0x0/0x31d returned 0 after 105229 usecs calling parport_cs_driver_init+0x0/0x49 @ 1 initcall parport_cs_driver_init+0x0/0x49 returned 0 after 109 usecs calling topology_sysfs_init+0x0/0x61 @ 1 initcall topology_sysfs_init+0x0/0x61 returned 0 after 481 usecs calling cacheinfo_sysfs_init+0x0/0x61 @ 1 initcall cacheinfo_sysfs_init+0x0/0x61 returned 0 after 1553 usecs calling ibmasm_init+0x0/0x119 @ 1 ibmasm: IBM ASM Service Processor Driver version 1.0 loaded initcall ibmasm_init+0x0/0x119 returned 0 after 1111 usecs calling dummy_irq_init+0x0/0x110 @ 1 dummy-irq: no IRQ given. Use irq=N initcall dummy_irq_init+0x0/0x110 returned -5 after 656 usecs calling ics932s401_driver_init+0x0/0x4b @ 1 initcall ics932s401_driver_init+0x0/0x4b returned 0 after 138 usecs calling tifm_7xx1_driver_init+0x0/0x50 @ 1 initcall tifm_7xx1_driver_init+0x0/0x50 returned 0 after 194 usecs calling bh1770_driver_init+0x0/0x4b @ 1 initcall bh1770_driver_init+0x0/0x4b returned 0 after 129 usecs calling apds990x_driver_init+0x0/0x4b @ 1 initcall apds990x_driver_init+0x0/0x4b returned 0 after 142 usecs calling apds9802als_driver_init+0x0/0x4b @ 1 initcall apds9802als_driver_init+0x0/0x4b returned 0 after 161 usecs calling isl29003_driver_init+0x0/0x4b @ 1 initcall isl29003_driver_init+0x0/0x4b returned 0 after 97 usecs calling isl29020_driver_init+0x0/0x4b @ 1 initcall isl29020_driver_init+0x0/0x4b returned 0 after 138 usecs calling tsl2550_driver_init+0x0/0x4b @ 1 initcall tsl2550_driver_init+0x0/0x4b returned 0 after 114 usecs calling ds1682_driver_init+0x0/0x4b @ 1 initcall ds1682_driver_init+0x0/0x4b returned 0 after 102 usecs calling c2port_init+0x0/0xbd @ 1 Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti initcall c2port_init+0x0/0xbd returned 0 after 1049 usecs calling hmc6352_driver_init+0x0/0x4b @ 1 initcall hmc6352_driver_init+0x0/0x4b returned 0 after 120 usecs calling at24_init+0x0/0xf3 @ 1 initcall at24_init+0x0/0xf3 returned 0 after 122 usecs calling at25_driver_init+0x0/0x4b @ 1 initcall at25_driver_init+0x0/0x4b returned 0 after 104 usecs calling eeprom_93xx46_driver_init+0x0/0x4b @ 1 initcall eeprom_93xx46_driver_init+0x0/0x4b returned 0 after 113 usecs calling idt_init+0x0/0xa0 @ 1 initcall idt_init+0x0/0xa0 returned 0 after 168 usecs calling mei_init+0x0/0x188 @ 1 initcall mei_init+0x0/0x188 returned 0 after 236 usecs calling mei_txe_driver_init+0x0/0x50 @ 1 initcall mei_txe_driver_init+0x0/0x50 returned 0 after 150 usecs calling lattice_ecp3_driver_init+0x0/0x4b @ 1 initcall lattice_ecp3_driver_init+0x0/0x4b returned 0 after 103 usecs calling dw_xdata_pcie_driver_init+0x0/0x50 @ 1 initcall dw_xdata_pcie_driver_init+0x0/0x50 returned 0 after 153 usecs calling rtsx_usb_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver rtsx_usb initcall rtsx_usb_driver_init+0x0/0x50 returned 0 after 991 usecs calling pvpanic_init+0x0/0x80 @ 1 initcall pvpanic_init+0x0/0x80 returned 0 after 4 usecs calling pvpanic_mmio_driver_init+0x0/0x4b @ 1 initcall pvpanic_mmio_driver_init+0x0/0x4b returned 0 after 122 usecs calling pvpanic_pci_driver_init+0x0/0x50 @ 1 initcall pvpanic_pci_driver_init+0x0/0x50 returned 0 after 168 usecs calling hl_init+0x0/0x264 @ 1 habanalabs: loading driver initcall hl_init+0x0/0x264 returned 0 after 868 usecs calling xsdfec_driver_init+0x0/0x4b @ 1 initcall xsdfec_driver_init+0x0/0x4b returned 0 after 98 usecs calling hisi_hikey_usb_driver_init+0x0/0x4b @ 1 initcall hisi_hikey_usb_driver_init+0x0/0x4b returned 0 after 172 usecs calling open_dice_init+0x0/0x76 @ 1 initcall open_dice_init+0x0/0x76 returned 0 after 172 usecs calling pci1xxxx_gp_driver_init+0x0/0x50 @ 1 initcall pci1xxxx_gp_driver_init+0x0/0x50 returned 0 after 163 usecs calling pci1xxxx_gpio_driver_init+0x0/0x50 @ 1 initcall pci1xxxx_gpio_driver_init+0x0/0x50 returned 0 after 128 usecs calling vcpu_stall_detect_driver_init+0x0/0x4b @ 1 initcall vcpu_stall_detect_driver_init+0x0/0x4b returned 0 after 111 usecs calling sm501_base_init+0x0/0x8d @ 1 initcall sm501_base_init+0x0/0x8d returned 0 after 223 usecs calling bcm590xx_i2c_driver_init+0x0/0x4b @ 1 initcall bcm590xx_i2c_driver_init+0x0/0x4b returned 0 after 85 usecs calling bd9571mwv_driver_init+0x0/0x4b @ 1 initcall bd9571mwv_driver_init+0x0/0x4b returned 0 after 85 usecs calling gsc_driver_init+0x0/0x4b @ 1 initcall gsc_driver_init+0x0/0x4b returned 0 after 167 usecs calling pasic3_driver_init+0x0/0x50 @ 1 initcall pasic3_driver_init+0x0/0x50 returned -19 after 123 usecs calling lp873x_driver_init+0x0/0x4b @ 1 initcall lp873x_driver_init+0x0/0x4b returned 0 after 78 usecs calling ti_tscadc_driver_init+0x0/0x4b @ 1 initcall ti_tscadc_driver_init+0x0/0x4b returned 0 after 102 usecs calling arizona_i2c_driver_init+0x0/0x4b @ 1 initcall arizona_i2c_driver_init+0x0/0x4b returned 0 after 83 usecs calling wm8994_i2c_driver_init+0x0/0x4b @ 1 initcall wm8994_i2c_driver_init+0x0/0x4b returned 0 after 128 usecs calling madera_spi_driver_init+0x0/0x4b @ 1 initcall madera_spi_driver_init+0x0/0x4b returned 0 after 106 usecs calling tps65086_driver_init+0x0/0x4b @ 1 initcall tps65086_driver_init+0x0/0x4b returned 0 after 103 usecs calling tps65912_i2c_driver_init+0x0/0x4b @ 1 initcall tps65912_i2c_driver_init+0x0/0x4b returned 0 after 79 usecs calling tps65912_spi_driver_init+0x0/0x4b @ 1 initcall tps65912_spi_driver_init+0x0/0x4b returned 0 after 74 usecs calling twl_driver_init+0x0/0x4b @ 1 initcall twl_driver_init+0x0/0x4b returned 0 after 83 usecs calling twl4030_audio_driver_init+0x0/0x4b @ 1 initcall twl4030_audio_driver_init+0x0/0x4b returned 0 after 151 usecs calling ocelot_spi_driver_init+0x0/0x4b @ 1 initcall ocelot_spi_driver_init+0x0/0x4b returned 0 after 131 usecs calling cpcap_driver_init+0x0/0x4b @ 1 initcall cpcap_driver_init+0x0/0x4b returned 0 after 69 usecs calling lp3943_driver_init+0x0/0x4b @ 1 initcall lp3943_driver_init+0x0/0x4b returned 0 after 83 usecs calling da9063_i2c_driver_init+0x0/0x4b @ 1 initcall da9063_i2c_driver_init+0x0/0x4b returned 0 after 79 usecs calling da9150_driver_init+0x0/0x4b @ 1 initcall da9150_driver_init+0x0/0x4b returned 0 after 76 usecs calling max77620_driver_init+0x0/0x4b @ 1 initcall max77620_driver_init+0x0/0x4b returned 0 after 111 usecs calling max77686_i2c_driver_init+0x0/0x4b @ 1 initcall max77686_i2c_driver_init+0x0/0x4b returned 0 after 75 usecs calling max77693_i2c_driver_init+0x0/0x4b @ 1 initcall max77693_i2c_driver_init+0x0/0x4b returned 0 after 79 usecs calling max77714_driver_init+0x0/0x4b @ 1 initcall max77714_driver_init+0x0/0x4b returned 0 after 77 usecs calling mp2629_driver_init+0x0/0x4b @ 1 initcall mp2629_driver_init+0x0/0x4b returned 0 after 165 usecs calling mt6360_driver_init+0x0/0x4b @ 1 initcall mt6360_driver_init+0x0/0x4b returned 0 after 74 usecs calling mt6370_driver_init+0x0/0x4b @ 1 initcall mt6370_driver_init+0x0/0x4b returned 0 after 82 usecs calling adp5520_driver_init+0x0/0x4b @ 1 initcall adp5520_driver_init+0x0/0x4b returned 0 after 59 usecs calling kempld_init+0x0/0x16e @ 1 initcall kempld_init+0x0/0x16e returned 0 after 107 usecs calling intel_quark_mfd_driver_init+0x0/0x50 @ 1 initcall intel_quark_mfd_driver_init+0x0/0x50 returned 0 after 190 usecs calling lpc_sch_driver_init+0x0/0x50 @ 1 initcall lpc_sch_driver_init+0x0/0x50 returned 0 after 138 usecs calling lpc_ich_driver_init+0x0/0x50 @ 1 initcall lpc_ich_driver_init+0x0/0x50 returned 0 after 181 usecs calling atmel_flexcom_driver_init+0x0/0x4b @ 1 initcall atmel_flexcom_driver_init+0x0/0x4b returned 0 after 121 usecs calling atmel_hlcdc_driver_init+0x0/0x4b @ 1 initcall atmel_hlcdc_driver_init+0x0/0x4b returned 0 after 93 usecs calling intel_lpss_init+0x0/0x51 @ 1 initcall intel_lpss_init+0x0/0x51 returned 0 after 1 usecs calling intel_lpss_pci_driver_init+0x0/0x50 @ 1 initcall intel_lpss_pci_driver_init+0x0/0x50 returned 0 after 159 usecs calling rn5t618_i2c_driver_init+0x0/0x4b @ 1 initcall rn5t618_i2c_driver_init+0x0/0x4b returned 0 after 86 usecs calling sec_pmic_driver_init+0x0/0x4b @ 1 initcall sec_pmic_driver_init+0x0/0x4b returned 0 after 85 usecs calling as3722_i2c_driver_init+0x0/0x4b @ 1 initcall as3722_i2c_driver_init+0x0/0x4b returned 0 after 85 usecs calling iqs62x_i2c_driver_init+0x0/0x4b @ 1 initcall iqs62x_i2c_driver_init+0x0/0x4b returned 0 after 101 usecs calling hi6421_pmic_driver_init+0x0/0x4b @ 1 initcall hi6421_pmic_driver_init+0x0/0x4b returned 0 after 103 usecs calling hi6421_spmi_pmic_driver_init+0x0/0x4b @ 1 initcall hi6421_spmi_pmic_driver_init+0x0/0x4b returned 0 after 68 usecs calling rt5033_driver_init+0x0/0x4b @ 1 initcall rt5033_driver_init+0x0/0x4b returned 0 after 109 usecs calling sky81452_driver_init+0x0/0x4b @ 1 initcall sky81452_driver_init+0x0/0x4b returned 0 after 86 usecs calling stpmic1_driver_init+0x0/0x4b @ 1 initcall stpmic1_driver_init+0x0/0x4b returned 0 after 82 usecs calling pm8008_mfd_driver_init+0x0/0x4b @ 1 initcall pm8008_mfd_driver_init+0x0/0x4b returned 0 after 163 usecs calling simple_mfd_i2c_driver_init+0x0/0x4b @ 1 initcall simple_mfd_i2c_driver_init+0x0/0x4b returned 0 after 81 usecs calling atc260x_i2c_driver_init+0x0/0x4b @ 1 initcall atc260x_i2c_driver_init+0x0/0x4b returned 0 after 86 usecs calling cxl_core_init+0x0/0x155 @ 1 initcall cxl_core_init+0x0/0x155 returned 0 after 245 usecs calling cxl_pci_driver_init+0x0/0x50 @ 1 initcall cxl_pci_driver_init+0x0/0x50 returned 0 after 235 usecs calling cxl_mem_driver_init+0x0/0x50 @ 1 initcall cxl_mem_driver_init+0x0/0x50 returned 0 after 84 usecs calling cxl_acpi_driver_init+0x0/0x4b @ 1 initcall cxl_acpi_driver_init+0x0/0x4b returned 0 after 140 usecs calling cxl_port_driver_init+0x0/0x50 @ 1 initcall cxl_port_driver_init+0x0/0x50 returned 0 after 78 usecs calling raid_init+0x0/0x49 @ 1 initcall raid_init+0x0/0x49 returned 0 after 45 usecs calling spi_transport_init+0x0/0x220 @ 1 initcall spi_transport_init+0x0/0x220 returned 0 after 83 usecs calling sas_transport_init+0x0/0x223 @ 1 initcall sas_transport_init+0x0/0x223 returned 0 after 196 usecs calling sas_class_init+0x0/0xfa @ 1 initcall sas_class_init+0x0/0xfa returned 0 after 10 usecs calling srp_transport_init+0x0/0xc0 @ 1 initcall srp_transport_init+0x0/0xc0 returned 0 after 222 usecs calling snic_init_module+0x0/0x149 @ 1 snic:SNIC Driver is supported only for x86_64 platforms! snic:Cisco SCSI NIC Driver, ver 0.0.1.18 snic:Trace Facility Enabled. Trace Buffer SZ 16 Pages. initcall snic_init_module+0x0/0x149 returned 0 after 3622 usecs calling advansys_init+0x0/0xcc @ 1 initcall advansys_init+0x0/0xcc returned 0 after 2322 usecs calling arcmsr_module_init+0x0/0x40 @ 1 initcall arcmsr_module_init+0x0/0x40 returned 0 after 147 usecs calling ahc_linux_init+0x0/0x117 @ 1 initcall ahc_linux_init+0x0/0x117 returned 0 after 165 usecs calling ahd_linux_init+0x0/0x153 @ 1 initcall ahd_linux_init+0x0/0x153 returned 0 after 197 usecs calling aac_init+0x0/0xaf @ 1 Adaptec aacraid driver 1.2.1[50983]-custom initcall aac_init+0x0/0xaf returned 0 after 918 usecs calling aic94xx_init+0x0/0x1a1 @ 1 aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded initcall aic94xx_init+0x0/0x1a1 returned 0 after 1234 usecs calling pm8001_init+0x0/0x143 @ 1 initcall pm8001_init+0x0/0x143 returned 0 after 292 usecs calling isci_init+0x0/0xf6 @ 1 isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 initcall isci_init+0x0/0xf6 returned 0 after 1217 usecs calling ips_module_init+0x0/0x1c8 @ 1 initcall ips_module_init+0x0/0x1c8 returned -19 after 246 usecs calling fdomain_pci_driver_init+0x0/0x50 @ 1 initcall fdomain_pci_driver_init+0x0/0x50 returned 0 after 120 usecs calling dmx3191d_pci_driver_init+0x0/0x50 @ 1 initcall dmx3191d_pci_driver_init+0x0/0x50 returned 0 after 158 usecs calling hpsa_init+0x0/0xce @ 1 initcall hpsa_init+0x0/0xce returned 0 after 193 usecs calling pqi_init+0x0/0x32f @ 1 Microchip SmartPQI Driver (v2.1.18-045) initcall pqi_init+0x0/0x32f returned 0 after 900 usecs calling sym2_init+0x0/0xe2 @ 1 initcall sym2_init+0x0/0xe2 returned 0 after 199 usecs calling dc395x_driver_init+0x0/0x50 @ 1 initcall dc395x_driver_init+0x0/0x50 returned 0 after 115 usecs calling megaraid_init+0x0/0x1b9 @ 1 initcall megaraid_init+0x0/0x1b9 returned 0 after 252 usecs calling mraid_mm_init+0x0/0x13a @ 1 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) initcall mraid_mm_init+0x0/0x13a returned 0 after 1419 usecs calling megaraid_init+0x0/0x189 @ 1 megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) initcall megaraid_init+0x0/0x189 returned 0 after 1156 usecs calling megasas_init+0x0/0x4df @ 1 megasas: 07.719.03.00-rc1 initcall megasas_init+0x0/0x4df returned 0 after 793 usecs calling _mpt3sas_init+0x0/0x267 @ 1 mpt3sas version 43.100.00.00 loaded initcall _mpt3sas_init+0x0/0x267 returned 0 after 1680 usecs calling atp870u_driver_init+0x0/0x50 @ 1 initcall atp870u_driver_init+0x0/0x50 returned 0 after 134 usecs calling initio_pci_driver_init+0x0/0x50 @ 1 initcall initio_pci_driver_init+0x0/0x50 returned 0 after 119 usecs calling myrb_init_module+0x0/0xcf @ 1 initcall myrb_init_module+0x0/0xcf returned 0 after 141 usecs calling tw_init+0x0/0x6f @ 1 3ware Storage Controller device driver for Linux v1.26.02.003. initcall tw_init+0x0/0x6f returned 0 after 1246 usecs calling twa_init+0x0/0x6f @ 1 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. initcall twa_init+0x0/0x6f returned 0 after 1223 usecs calling twl_init+0x0/0x6f @ 1 LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. initcall twl_init+0x0/0x6f returned 0 after 1191 usecs calling imm_driver_init+0x0/0x50 @ 1 initcall imm_driver_init+0x0/0x50 returned 0 after 1850 usecs calling init_nsp32+0x0/0x76 @ 1 nsp32: loading... initcall init_nsp32+0x0/0x76 returned 0 after 594 usecs calling hptiop_module_init+0x0/0x74 @ 1 RocketRAID 3xxx/4xxx Controller driver v1.10.0 initcall hptiop_module_init+0x0/0x74 returned 0 after 923 usecs calling stex_init+0x0/0x6f @ 1 stex: Promise SuperTrak EX Driver version: 6.02.0000.01 initcall stex_init+0x0/0x6f returned 0 after 1039 usecs calling mvs_init+0x0/0xcf @ 1 initcall mvs_init+0x0/0xcf returned 0 after 193 usecs calling mvumi_pci_driver_init+0x0/0x50 @ 1 initcall mvumi_pci_driver_init+0x0/0x50 returned 0 after 121 usecs calling esas2r_init+0x0/0x45a @ 1 initcall esas2r_init+0x0/0x45a returned 0 after 224 usecs calling virtio_scsi_init+0x0/0x18f @ 1 initcall virtio_scsi_init+0x0/0x18f returned 0 after 440 usecs calling pvscsi_init+0x0/0x74 @ 1 VMware PVSCSI driver - version 1.0.7.0-k initcall pvscsi_init+0x0/0x74 returned 0 after 943 usecs calling wd719x_pci_driver_init+0x0/0x50 @ 1 initcall wd719x_pci_driver_init+0x0/0x50 returned 0 after 126 usecs calling init_sg+0x0/0x222 @ 1 initcall init_sg+0x0/0x222 returned 0 after 138 usecs calling scsi_debug_init+0x0/0xf09 @ 1 scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) scsi host0: scsi_debug: version 0191 [20210520] dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0 scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 initcall scsi_debug_init+0x0/0xf09 returned 0 after 30989 usecs calling nvme_core_init+0x0/0x35c @ 1 scsi 0:0:0:0: Attached scsi generic sg0 type 0 initcall nvme_core_init+0x0/0x35c returned 0 after 3460 usecs calling nvmf_init+0x0/0x2f4 @ 1 initcall nvmf_init+0x0/0x2f4 returned 0 after 678 usecs calling nvme_fc_init_module+0x0/0x1d5 @ 1 initcall nvme_fc_init_module+0x0/0x1d5 returned 0 after 529 usecs calling ahci_pci_driver_init+0x0/0x50 @ 1 initcall ahci_pci_driver_init+0x0/0x50 returned 0 after 181 usecs calling acard_ahci_pci_driver_init+0x0/0x50 @ 1 initcall acard_ahci_pci_driver_init+0x0/0x50 returned 0 after 157 usecs calling ahci_driver_init+0x0/0x4b @ 1 initcall ahci_driver_init+0x0/0x4b returned 0 after 104 usecs calling inic_pci_driver_init+0x0/0x50 @ 1 initcall inic_pci_driver_init+0x0/0x50 returned 0 after 204 usecs calling ceva_ahci_driver_init+0x0/0x4b @ 1 initcall ceva_ahci_driver_init+0x0/0x4b returned 0 after 174 usecs calling ahci_dwc_driver_init+0x0/0x4b @ 1 initcall ahci_dwc_driver_init+0x0/0x4b returned 0 after 91 usecs calling init_mtd+0x0/0x2b6 @ 1 initcall init_mtd+0x0/0x2b6 returned 0 after 344 usecs calling ar7_parser_init+0x0/0x4b @ 1 initcall ar7_parser_init+0x0/0x4b returned 0 after 38 usecs calling cmdline_parser_init+0x0/0x76 @ 1 initcall cmdline_parser_init+0x0/0x76 returned 0 after 3 usecs calling ofpart_parser_init+0x0/0x66 @ 1 initcall ofpart_parser_init+0x0/0x66 returned 0 after 4 usecs calling redboot_parser_init+0x0/0x4b @ 1 initcall redboot_parser_init+0x0/0x4b returned 0 after 3 usecs calling mtdblock_tr_init+0x0/0x49 @ 1 initcall mtdblock_tr_init+0x0/0x49 returned 0 after 71 usecs calling ftl_tr_init+0x0/0x49 @ 1 initcall ftl_tr_init+0x0/0x49 returned 0 after 15 usecs calling inftl_tr_init+0x0/0x49 @ 1 initcall inftl_tr_init+0x0/0x49 returned 0 after 13 usecs calling rfd_ftl_tr_init+0x0/0x49 @ 1 initcall rfd_ftl_tr_init+0x0/0x49 returned 0 after 12 usecs calling init_ssfdcr+0x0/0x63 @ 1 SSFDC read-only Flash Translation layer initcall init_ssfdcr+0x0/0x63 returned 0 after 689 usecs calling mtdoops_init+0x0/0x2f8 @ 1 mtdoops: mtd device (mtddev=name/number) must be supplied initcall mtdoops_init+0x0/0x2f8 returned -22 after 870 usecs calling mtdswap_ops_init+0x0/0x49 @ 1 initcall mtdswap_ops_init+0x0/0x49 returned 0 after 17 usecs calling cfi_probe_init+0x0/0x4a @ 1 initcall cfi_probe_init+0x0/0x4a returned 0 after 77 usecs calling jedec_probe_init+0x0/0x4a @ 1 initcall jedec_probe_init+0x0/0x4a returned 0 after 3 usecs calling map_ram_init+0x0/0x4a @ 1 initcall map_ram_init+0x0/0x4a returned 0 after 3 usecs calling map_rom_init+0x0/0x4a @ 1 initcall map_rom_init+0x0/0x4a returned 0 after 3 usecs calling map_absent_init+0x0/0x4a @ 1 initcall map_absent_init+0x0/0x4a returned 0 after 3 usecs calling lpddr_probe_init+0x0/0x4a @ 1 initcall lpddr_probe_init+0x0/0x4a returned 0 after 3 usecs calling init_l440gx+0x0/0x584 @ 1 L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue initcall init_l440gx+0x0/0x584 returned -19 after 1054 usecs calling init_esb2rom+0x0/0x159 @ 1 device id = 2440 device id = 2480 device id = 24c0 device id = 24d0 device id = 25a1 device id = 2670 initcall init_esb2rom+0x0/0x159 returned -6 after 2825 usecs calling init_ichxrom+0x0/0xc4 @ 1 initcall init_ichxrom+0x0/0xc4 returned -6 after 46 usecs calling init_ck804xrom+0x0/0xe7 @ 1 initcall init_ck804xrom+0x0/0xe7 returned -6 after 92 usecs calling init_pcmciamtd+0x0/0x132 @ 1 initcall init_pcmciamtd+0x0/0x132 returned 0 after 112 usecs calling platram_driver_init+0x0/0x4b @ 1 initcall platram_driver_init+0x0/0x4b returned 0 after 124 usecs calling init_phram+0x0/0xfe @ 1 initcall init_phram+0x0/0xfe returned 0 after 91 usecs calling init_pmc551+0x0/0x83d @ 1 Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. pmc551: not detected initcall init_pmc551+0x0/0x83d returned -19 after 1492 usecs calling dataflash_driver_init+0x0/0x4b @ 1 initcall dataflash_driver_init+0x0/0x4b returned 0 after 113 usecs calling mchp48l640_driver_init+0x0/0x4b @ 1 initcall mchp48l640_driver_init+0x0/0x4b returned 0 after 85 usecs calling sst25l_driver_init+0x0/0x4b @ 1 initcall sst25l_driver_init+0x0/0x4b returned 0 after 82 usecs calling spinand_drv_init+0x0/0x4b @ 1 initcall spinand_drv_init+0x0/0x4b returned 0 after 84 usecs calling ubi_gluebi_init+0x0/0x4b @ 1 initcall ubi_gluebi_init+0x0/0x4b returned 0 after 79 usecs calling spi_mux_driver_init+0x0/0x4b @ 1 initcall spi_mux_driver_init+0x0/0x4b returned 0 after 91 usecs calling spidev_init+0x0/0x176 @ 1 initcall spidev_init+0x0/0x176 returned 0 after 154 usecs calling altera_spi_driver_init+0x0/0x4b @ 1 initcall altera_spi_driver_init+0x0/0x4b returned 0 after 109 usecs calling dfl_spi_altera_driver_init+0x0/0x4b @ 1 Driver 'dfl-spi-altera' was unable to register with bus_type 'dfl' because the bus was not initialized. initcall dfl_spi_altera_driver_init+0x0/0x4b returned -22 after 1346 usecs calling butterfly_driver_init+0x0/0x50 @ 1 parport0: powerup/reset Butterfly parport_pc 00:03: registered master spi42 spi spi42.1: spi_bitbang_setup, 66 nsec/bit spi spi42.1: setup mode 0, 8 bits/w, 15000000 Hz max --> 0 parport_pc 00:03: registered child spi42.1 parport0: dataflash at spi42.1 parport0: AVR Butterfly initcall butterfly_driver_init+0x0/0x50 returned 0 after 126593 usecs calling fsi_spi_driver_init+0x0/0x49 @ 1 initcall fsi_spi_driver_init+0x0/0x49 returned 0 after 94 usecs calling fsl_spi_init+0x0/0x4b @ 1 initcall fsl_spi_init+0x0/0x4b returned 0 after 108 usecs calling spi_gpio_driver_init+0x0/0x4b @ 1 initcall spi_gpio_driver_init+0x0/0x4b returned 0 after 147 usecs calling intel_spi_platform_driver_init+0x0/0x4b @ 1 initcall intel_spi_platform_driver_init+0x0/0x4b returned 0 after 103 usecs calling mchp_corespi_driver_init+0x0/0x4b @ 1 initcall mchp_corespi_driver_init+0x0/0x4b returned 0 after 108 usecs calling mchp_coreqspi_driver_init+0x0/0x4b @ 1 initcall mchp_coreqspi_driver_init+0x0/0x4b returned 0 after 93 usecs calling mxic_spi_driver_init+0x0/0x4b @ 1 initcall mxic_spi_driver_init+0x0/0x4b returned 0 after 98 usecs calling tiny_spi_driver_init+0x0/0x4b @ 1 initcall tiny_spi_driver_init+0x0/0x4b returned 0 after 86 usecs calling pxa2xx_spi_pci_driver_init+0x0/0x50 @ 1 initcall pxa2xx_spi_pci_driver_init+0x0/0x50 returned 0 after 128 usecs calling rockchip_spi_driver_init+0x0/0x4b @ 1 initcall rockchip_spi_driver_init+0x0/0x4b returned 0 after 99 usecs calling sc18is602_driver_init+0x0/0x4b @ 1 initcall sc18is602_driver_init+0x0/0x4b returned 0 after 91 usecs calling tle62x0_driver_init+0x0/0x4b @ 1 initcall tle62x0_driver_init+0x0/0x4b returned 0 after 98 usecs calling pch_spi_init+0x0/0xc9 @ 1 initcall pch_spi_init+0x0/0xc9 returned 0 after 253 usecs calling blackhole_netdev_init+0x0/0xe8 @ 1 initcall blackhole_netdev_init+0x0/0xe8 returned 0 after 65 usecs calling e1000_init_module+0x0/0x111 @ 1 e1000: Intel(R) PRO/1000 Network Driver e1000: Copyright (c) 1999-2006 Intel Corporation. ACPI: \_SB_.LNKC: Enabled at IRQ 11 e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection initcall e1000_init_module+0x0/0x111 returned 0 after 1309808 usecs calling fw_core_init+0x0/0x1e7 @ 1 initcall fw_core_init+0x0/0x1e7 returned 0 after 612 usecs calling sbp2_init+0x0/0x49 @ 1 initcall sbp2_init+0x0/0x49 returned 0 after 73 usecs calling vfio_init+0x0/0x233 @ 1 VFIO - User Level meta-driver version: 0.3 initcall vfio_init+0x0/0x233 returned 0 after 1502 usecs calling vfio_virqfd_init+0x0/0x86 @ 1 initcall vfio_virqfd_init+0x0/0x86 returned 0 after 535 usecs calling vfio_iommu_type1_init+0x0/0x49 @ 1 initcall vfio_iommu_type1_init+0x0/0x49 returned 0 after 9 usecs calling vfio_pci_core_init+0x0/0x44 @ 1 initcall vfio_pci_core_init+0x0/0x44 returned 0 after 43 usecs calling vfio_pci_init+0x0/0xef @ 1 initcall vfio_pci_init+0x0/0xef returned 0 after 269 usecs calling ks0108_parport_driver_init+0x0/0x50 @ 1 parport0: cannot grant exclusive access for device ks0108 ks0108: ERROR: parport didn't register new device initcall ks0108_parport_driver_init+0x0/0x50 returned 0 after 4431 usecs calling cfag12864b_init+0x0/0x304 @ 1 cfag12864b: ERROR: ks0108 is not initialized initcall cfag12864b_init+0x0/0x304 returned -22 after 832 usecs calling cfag12864bfb_init+0x0/0x1c7 @ 1 cfag12864bfb: ERROR: cfag12864b is not initialized initcall cfag12864bfb_init+0x0/0x1c7 returned -22 after 799 usecs calling hd44780_driver_init+0x0/0x4b @ 1 initcall hd44780_driver_init+0x0/0x4b returned 0 after 125 usecs calling ht16k33_driver_init+0x0/0x4b @ 1 initcall ht16k33_driver_init+0x0/0x4b returned 0 after 89 usecs calling panel_init_module+0x0/0x492 @ 1 panel: could not claim access to parport0. Aborting. panel: panel driver not yet registered initcall panel_init_module+0x0/0x492 returned 0 after 2782 usecs calling lcd2s_i2c_driver_init+0x0/0x4b @ 1 initcall lcd2s_i2c_driver_init+0x0/0x4b returned 0 after 100 usecs calling nonstatic_sysfs_init+0x0/0x49 @ 1 initcall nonstatic_sysfs_init+0x0/0x49 returned 0 after 7 usecs calling i82092aa_module_init+0x0/0x50 @ 1 initcall i82092aa_module_init+0x0/0x50 returned 0 after 166 usecs calling usb_conn_driver_init+0x0/0x4b @ 1 initcall usb_conn_driver_init+0x0/0x4b returned 0 after 104 usecs calling gpio_vbus_driver_init+0x0/0x4b @ 1 initcall gpio_vbus_driver_init+0x0/0x4b returned 0 after 128 usecs calling dwc3_driver_init+0x0/0x4b @ 1 initcall dwc3_driver_init+0x0/0x4b returned 0 after 106 usecs calling dwc3_pci_driver_init+0x0/0x50 @ 1 initcall dwc3_pci_driver_init+0x0/0x50 returned 0 after 129 usecs calling dwc3_haps_driver_init+0x0/0x50 @ 1 initcall dwc3_haps_driver_init+0x0/0x50 returned 0 after 132 usecs calling dwc2_platform_driver_init+0x0/0x4b @ 1 initcall dwc2_platform_driver_init+0x0/0x4b returned 0 after 140 usecs calling dwc2_pci_driver_init+0x0/0x50 @ 1 initcall dwc2_pci_driver_init+0x0/0x50 returned 0 after 198 usecs calling mon_init+0x0/0x295 @ 1 initcall mon_init+0x0/0x295 returned 0 after 600 usecs calling oxu_driver_init+0x0/0x4b @ 1 initcall oxu_driver_init+0x0/0x4b returned 0 after 104 usecs calling isp116x_driver_init+0x0/0x4b @ 1 initcall isp116x_driver_init+0x0/0x4b returned 0 after 91 usecs calling ohci_hcd_mod_init+0x0/0x188 @ 1 initcall ohci_hcd_mod_init+0x0/0x188 returned 0 after 99 usecs calling ohci_platform_init+0x0/0xa3 @ 1 initcall ohci_platform_init+0x0/0xa3 returned 0 after 91 usecs calling xhci_hcd_init+0x0/0x84 @ 1 initcall xhci_hcd_init+0x0/0x84 returned 0 after 2 usecs calling xhci_pci_init+0x0/0x6d @ 1 initcall xhci_pci_init+0x0/0x6d returned 0 after 138 usecs calling xhci_plat_init+0x0/0x68 @ 1 initcall xhci_plat_init+0x0/0x68 returned 0 after 119 usecs calling sl811h_driver_init+0x0/0x4b @ 1 initcall sl811h_driver_init+0x0/0x4b returned 0 after 98 usecs calling sl811_cs_driver_init+0x0/0x49 @ 1 initcall sl811_cs_driver_init+0x0/0x49 returned 0 after 109 usecs calling r8a66597_driver_init+0x0/0x4b @ 1 initcall r8a66597_driver_init+0x0/0x4b returned 0 after 108 usecs calling bcma_hcd_driver_init+0x0/0x4b @ 1 initcall bcma_hcd_driver_init+0x0/0x4b returned 0 after 77 usecs calling ssb_hcd_init+0x0/0x4b @ 1 initcall ssb_hcd_init+0x0/0x4b returned 0 after 70 usecs calling fotg210_hcd_init+0x0/0x1fa @ 1 Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after initcall fotg210_hcd_init+0x0/0x1fa returned 0 after 1374 usecs calling c67x00_driver_init+0x0/0x4b @ 1 initcall c67x00_driver_init+0x0/0x4b returned 0 after 99 usecs calling acm_init+0x0/0x19e @ 1 usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters initcall acm_init+0x0/0x19e returned 0 after 2219 usecs calling usblp_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver usblp initcall usblp_driver_init+0x0/0x50 returned 0 after 1020 usecs calling wdm_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver cdc_wdm initcall wdm_driver_init+0x0/0x50 returned 0 after 1009 usecs calling usbtmc_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver usbtmc initcall usbtmc_driver_init+0x0/0x50 returned 0 after 1125 usecs calling usb_mdc800_init+0x0/0x49c @ 1 usbcore: registered new interface driver mdc800 mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera initcall usb_mdc800_init+0x0/0x49c returned 0 after 2833 usecs calling mts_usb_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver microtekX6 initcall mts_usb_driver_init+0x0/0x50 returned 0 after 1143 usecs calling usb_serial_init+0x0/0x251 @ 1 initcall usb_serial_init+0x0/0x251 returned 0 after 158 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver belkin_sa usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter initcall usb_serial_module_init+0x0/0x53 returned 0 after 6850 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver cp210x usbserial: USB Serial support registered for cp210x initcall usb_serial_module_init+0x0/0x53 returned 0 after 1731 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver cyberjack usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader initcall usb_serial_module_init+0x0/0x53 returned 0 after 1980 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver cypress_m8 usbserial: USB Serial support registered for DeLorme Earthmate USB usbserial: USB Serial support registered for HID->COM RS232 Adapter usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter initcall usb_serial_module_init+0x0/0x53 returned 0 after 3813 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver io_edgeport usbserial: USB Serial support registered for Edgeport 2 port adapter usbserial: USB Serial support registered for Edgeport 4 port adapter usbserial: USB Serial support registered for Edgeport 8 port adapter usbserial: USB Serial support registered for EPiC device initcall usb_serial_module_init+0x0/0x53 returned 0 after 4745 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver empeg usbserial: USB Serial support registered for empeg initcall usb_serial_module_init+0x0/0x53 returned 0 after 1686 usecs calling f81232_init+0x0/0xd1 @ 1 usbcore: registered new interface driver f81534a_ctrl usbcore: registered new interface driver f81232 usbserial: USB Serial support registered for f81232 usbserial: USB Serial support registered for f81534a initcall f81232_init+0x0/0xd1 returned 0 after 3478 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver garmin_gps usbserial: USB Serial support registered for Garmin GPS usb/tty initcall usb_serial_module_init+0x0/0x53 returned 0 after 1837 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver ipaq usbserial: USB Serial support registered for PocketPC PDA initcall usb_serial_module_init+0x0/0x53 returned 0 after 1690 usecs calling ir_init+0x0/0x85 @ 1 usbcore: registered new interface driver ir_usb usbserial: USB Serial support registered for IR Dongle initcall ir_init+0x0/0x85 returned 0 after 1765 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver iuu_phoenix usbserial: USB Serial support registered for iuu_phoenix initcall usb_serial_module_init+0x0/0x53 returned 0 after 1782 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver keyspan usbserial: USB Serial support registered for Keyspan - (without firmware) usbserial: USB Serial support registered for Keyspan 1 port adapter usbserial: USB Serial support registered for Keyspan 2 port adapter usbserial: USB Serial support registered for Keyspan 4 port adapter initcall usb_serial_module_init+0x0/0x53 returned 0 after 4942 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver keyspan_pda usbserial: USB Serial support registered for Keyspan PDA usbserial: USB Serial support registered for Keyspan PDA - (prerenumeration) initcall usb_serial_module_init+0x0/0x53 returned 0 after 2960 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver kl5kusb105 usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect initcall usb_serial_module_init+0x0/0x53 returned 0 after 2103 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver mct_u232 usbserial: USB Serial support registered for MCT U232 initcall usb_serial_module_init+0x0/0x53 returned 0 after 1779 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver mxuport usbserial: USB Serial support registered for MOXA UPort initcall usb_serial_module_init+0x0/0x53 returned 0 after 1825 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver omninet usbserial: USB Serial support registered for ZyXEL - omni.net usb initcall usb_serial_module_init+0x0/0x53 returned 0 after 2008 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver opticon usbserial: USB Serial support registered for opticon initcall usb_serial_module_init+0x0/0x53 returned 0 after 1425 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver qcaux usbserial: USB Serial support registered for qcaux initcall usb_serial_module_init+0x0/0x53 returned 0 after 5795 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver safe_serial usbserial: USB Serial support registered for safe_serial initcall usb_serial_module_init+0x0/0x53 returned 0 after 1997 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver sierra usbserial: USB Serial support registered for Sierra USB modem initcall usb_serial_module_init+0x0/0x53 returned 0 after 1917 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver usb_serial_simple usbserial: USB Serial support registered for carelink usbserial: USB Serial support registered for zio usbserial: USB Serial support registered for funsoft usbserial: USB Serial support registered for flashloader usbserial: USB Serial support registered for google usbserial: USB Serial support registered for libtransistor usbserial: USB Serial support registered for vivopay usbserial: USB Serial support registered for moto_modem usbserial: USB Serial support registered for motorola_tetra usbserial: USB Serial support registered for nokia usbserial: USB Serial support registered for novatel_gps usbserial: USB Serial support registered for hp4x usbserial: USB Serial support registered for suunto usbserial: USB Serial support registered for siemens_mpi initcall usb_serial_module_init+0x0/0x53 returned 0 after 13437 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver spcp8x5 usbserial: USB Serial support registered for SPCP8x5 initcall usb_serial_module_init+0x0/0x53 returned 0 after 1773 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver ssu100 usbserial: USB Serial support registered for Quatech SSU-100 USB to Serial Driver initcall usb_serial_module_init+0x0/0x53 returned 0 after 2096 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver symbolserial usbserial: USB Serial support registered for symbol initcall usb_serial_module_init+0x0/0x53 returned 0 after 1834 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver visor usbserial: USB Serial support registered for Handspring Visor / Palm OS usbserial: USB Serial support registered for Sony Clie 5.0 usbserial: USB Serial support registered for Sony Clie 3.5 initcall usb_serial_module_init+0x0/0x53 returned 0 after 3849 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver wishbone_serial usbserial: USB Serial support registered for wishbone_serial initcall usb_serial_module_init+0x0/0x53 returned 0 after 1901 usecs calling usb_serial_module_init+0x0/0x53 @ 1 usbcore: registered new interface driver xsens_mt usbserial: USB Serial support registered for xsens_mt initcall usb_serial_module_init+0x0/0x53 returned 0 after 1806 usecs calling cypress_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver cypress_cy7c63 initcall cypress_driver_init+0x0/0x50 returned 0 after 942 usecs calling cytherm_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver cytherm initcall cytherm_driver_init+0x0/0x50 returned 0 after 987 usecs calling emi26_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver emi26 - firmware loader initcall emi26_driver_init+0x0/0x50 returned 0 after 1045 usecs calling emi62_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver emi62 - firmware loader initcall emi62_driver_init+0x0/0x50 returned 0 after 1073 usecs calling mfi_fc_driver_init+0x0/0x4b @ 1 usbcore: registered new device driver apple-mfi-fastcharge initcall mfi_fc_driver_init+0x0/0x4b returned 0 after 953 usecs calling idmouse_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver idmouse initcall idmouse_driver_init+0x0/0x50 returned 0 after 928 usecs calling iowarrior_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver iowarrior initcall iowarrior_driver_init+0x0/0x50 returned 0 after 881 usecs calling lcd_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver usblcd initcall lcd_driver_init+0x0/0x50 returned 0 after 894 usecs calling tower_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver legousbtower initcall tower_driver_init+0x0/0x50 returned 0 after 904 usecs calling tv_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver trancevibrator initcall tv_driver_init+0x0/0x50 returned 0 after 942 usecs calling uss720_init+0x0/0xde @ 1 usbcore: registered new interface driver uss720 uss720: USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip uss720: NOTE: this is a special purpose driver to allow nonstandard uss720: protocols (eg. bitbang) over USS720 usb to parallel cables uss720: If you just want to connect to a printer, use usblp instead initcall uss720_init+0x0/0xde returned 0 after 6877 usecs calling sevseg_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver usbsevseg initcall sevseg_driver_init+0x0/0x50 returned 0 after 949 usecs calling yurex_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver yurex initcall yurex_driver_init+0x0/0x50 returned 0 after 887 usecs calling usb251xb_i2c_driver_init+0x0/0x4b @ 1 initcall usb251xb_i2c_driver_init+0x0/0x4b returned 0 after 97 usecs calling usb3503_init+0x0/0x100 @ 1 initcall usb3503_init+0x0/0x100 returned 0 after 190 usecs calling usb4604_i2c_driver_init+0x0/0x4b @ 1 initcall usb4604_i2c_driver_init+0x0/0x4b returned 0 after 79 usecs calling usb_sisusb_init+0x0/0x50 @ 1 usbcore: registered new interface driver sisusb initcall usb_sisusb_init+0x0/0x50 returned 0 after 871 usecs calling onboard_hub_init+0x0/0xc3 @ 1 usbcore: registered new device driver onboard-usb-hub initcall onboard_hub_init+0x0/0xc3 returned 0 after 965 usecs calling musb_driver_init+0x0/0x4b @ 1 initcall musb_driver_init+0x0/0x4b returned 0 after 123 usecs calling gadget_cfs_init+0x0/0x61 @ 1 initcall gadget_cfs_init+0x0/0x61 returned 0 after 57 usecs calling dummy_hcd_init+0x0/0xc8e @ 1 dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005 dummy_hcd dummy_hcd.0: Dummy host controller dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected initcall dummy_hcd_init+0x0/0xc8e returned 0 after 11016 usecs calling net2272_init+0x0/0xc9 @ 1 initcall net2272_init+0x0/0xc9 returned 0 after 322 usecs calling udc_driver_init+0x0/0x4b @ 1 initcall udc_driver_init+0x0/0x4b returned 0 after 112 usecs calling m66592_driver_init+0x0/0x50 @ 1 initcall m66592_driver_init+0x0/0x50 returned -19 after 150 usecs calling r8a66597_driver_init+0x0/0x50 @ 1 initcall r8a66597_driver_init+0x0/0x50 returned -19 after 160 usecs calling udc_driver_init+0x0/0x4b @ 1 initcall udc_driver_init+0x0/0x4b returned 0 after 115 usecs calling fusb300_driver_init+0x0/0x50 @ 1 initcall fusb300_driver_init+0x0/0x50 returned -19 after 164 usecs calling gr_driver_init+0x0/0x4b @ 1 initcall gr_driver_init+0x0/0x4b returned 0 after 139 usecs calling udc_plat_driver_init+0x0/0x4b @ 1 initcall udc_plat_driver_init+0x0/0x4b returned 0 after 119 usecs calling bdc_driver_init+0x0/0x4b @ 1 initcall bdc_driver_init+0x0/0x4b returned 0 after 111 usecs calling max3420_driver_init+0x0/0x4b @ 1 SPI driver max3420-udc has no spi_device_id for maxim,max3421-udc initcall max3420_driver_init+0x0/0x4b returned 0 after 1063 usecs calling acmmod_init+0x0/0x49 @ 1 initcall acmmod_init+0x0/0x49 returned 0 after 53 usecs calling sslb_modinit+0x0/0xbb @ 1 initcall sslb_modinit+0x0/0xbb returned 0 after 32 usecs calling userial_init+0x0/0x213 @ 1 userial_init: registered 8 ttyGS* devices initcall userial_init+0x0/0x213 returned 0 after 755 usecs calling gsermod_init+0x0/0x49 @ 1 initcall gsermod_init+0x0/0x49 returned 0 after 5 usecs calling obexmod_init+0x0/0x49 @ 1 initcall obexmod_init+0x0/0x49 returned 0 after 5 usecs calling mass_storagemod_init+0x0/0x49 @ 1 initcall mass_storagemod_init+0x0/0x49 returned 0 after 4 usecs calling hidmod_init+0x0/0x49 @ 1 initcall hidmod_init+0x0/0x49 returned 0 after 4 usecs calling printermod_init+0x0/0x49 @ 1 initcall printermod_init+0x0/0x49 returned 0 after 4 usecs calling zero_driver_init+0x0/0x49 @ 1 udc dummy_udc.0: binding gadget driver [zero] zero gadget.0: adding 'source/sink'/(ptrval) to config 'source/sink'/(ptrval) zero gadget.0: dual speed source/sink: IN/ep1in-bulk, OUT/ep2out-bulk, ISO-IN/, ISO-OUT/ zero gadget.0: adding 'loopback'/(ptrval) to config 'loopback'/(ptrval) zero gadget.0: dual speed loopback: IN/ep1in-bulk, OUT/ep2out-bulk zero gadget.0: Gadget Zero, version: Cinco de Mayo 2008 zero gadget.0: zero ready dummy_hcd dummy_hcd.0: port status 0x00010101 has changes dummy_hcd dummy_hcd.0: port status 0x00010101 has changes initcall zero_driver_init+0x0/0x49 returned 0 after 10257 usecs calling gadgetfs_init+0x0/0x99 @ 1 gadgetfs: USB Gadget filesystem, version 24 Aug 2004 initcall gadgetfs_init+0x0/0x99 returned 0 after 935 usecs calling gserial_init+0x0/0x104 @ 1 UDC core: g_serial: couldn't find an available UDC initcall gserial_init+0x0/0x104 returned 0 after 1009 usecs calling printer_driver_init+0x0/0x49 @ 1 UDC core: printer: couldn't find an available UDC initcall printer_driver_init+0x0/0x49 returned 0 after 929 usecs calling hidg_init+0x0/0xc7 @ 1 initcall hidg_init+0x0/0xc7 returned -19 after 174 usecs calling acm_ms_driver_init+0x0/0x49 @ 1 UDC core: g_acm_ms: couldn't find an available UDC initcall acm_ms_driver_init+0x0/0x49 returned 0 after 937 usecs calling i8042_init+0x0/0x25f @ 1 i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 initcall i8042_init+0x0/0x25f returned 0 after 5359 usecs calling parkbd_parport_driver_init+0x0/0x50 @ 1 parport0: cannot grant exclusive access for device parkbd initcall parkbd_parport_driver_init+0x0/0x50 returned 0 after 691 usecs calling serport_init+0x0/0x8d @ 1 initcall serport_init+0x0/0x8d returned 0 after 2 usecs calling ct82c710_init+0x0/0x1a2 @ 1 initcall ct82c710_init+0x0/0x1a2 returned -19 after 25 usecs calling pcips2_driver_init+0x0/0x50 @ 1 initcall pcips2_driver_init+0x0/0x50 returned 0 after 143 usecs calling ps2mult_drv_init+0x0/0x50 @ 1 initcall ps2mult_drv_init+0x0/0x50 returned 0 after 138 usecs calling serio_raw_drv_init+0x0/0x50 @ 1 initcall serio_raw_drv_init+0x0/0x50 returned 0 after 136 usecs calling altera_ps2_driver_init+0x0/0x4b @ 1 initcall altera_ps2_driver_init+0x0/0x4b returned 0 after 75 usecs calling apbps2_of_driver_init+0x0/0x4b @ 1 initcall apbps2_of_driver_init+0x0/0x4b returned 0 after 97 usecs calling ps2_gpio_driver_init+0x0/0x4b @ 1 initcall ps2_gpio_driver_init+0x0/0x4b returned 0 after 84 usecs calling userio_misc_init+0x0/0x49 @ 1 initcall userio_misc_init+0x0/0x49 returned 0 after 360 usecs calling fm801_gp_driver_init+0x0/0x50 @ 1 initcall fm801_gp_driver_init+0x0/0x50 returned 0 after 138 usecs calling l4_init+0x0/0x14d @ 1 initcall l4_init+0x0/0x14d returned -19 after 38 usecs calling ns558_init+0x0/0x171 @ 1 initcall ns558_init+0x0/0x171 returned 0 after 47429 usecs calling input_leds_init+0x0/0x49 @ 1 initcall input_leds_init+0x0/0x49 returned 0 after 11 usecs calling joydev_init+0x0/0x49 @ 1 initcall joydev_init+0x0/0x49 returned 0 after 28 usecs calling evdev_init+0x0/0x49 @ 1 initcall evdev_init+0x0/0x49 returned 0 after 702 usecs calling evbug_init+0x0/0x49 @ 1 evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) initcall evbug_init+0x0/0x49 returned 0 after 1043 usecs calling atkbd_init+0x0/0x50 @ 1 initcall atkbd_init+0x0/0x50 returned 0 after 144 usecs calling ad7877_driver_init+0x0/0x4b @ 1 initcall ad7877_driver_init+0x0/0x4b returned 0 after 964 usecs calling ad7879_i2c_driver_init+0x0/0x4b @ 1 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 initcall ad7879_i2c_driver_init+0x0/0x4b returned 0 after 2599 usecs calling ad7879_spi_driver_init+0x0/0x4b @ 1 evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) initcall ad7879_spi_driver_init+0x0/0x4b returned 0 after 3156 usecs calling ads7846_driver_init+0x0/0x4b @ 1 SPI driver ads7846 has no spi_device_id for ti,tsc2046 SPI driver ads7846 has no spi_device_id for ti,ads7843 SPI driver ads7846 has no spi_device_id for ti,ads7845 SPI driver ads7846 has no spi_device_id for ti,ads7873 initcall ads7846_driver_init+0x0/0x4b returned 0 after 3241 usecs calling auo_pixcir_driver_init+0x0/0x4b @ 1 initcall auo_pixcir_driver_init+0x0/0x4b returned 0 after 89 usecs calling bu21013_driver_init+0x0/0x4b @ 1 initcall bu21013_driver_init+0x0/0x4b returned 0 after 77 usecs calling bu21029_driver_init+0x0/0x4b @ 1 initcall bu21029_driver_init+0x0/0x4b returned 0 after 73 usecs calling icn8318_driver_init+0x0/0x4b @ 1 initcall icn8318_driver_init+0x0/0x4b returned 0 after 101 usecs calling cy8ctma140_driver_init+0x0/0x4b @ 1 initcall cy8ctma140_driver_init+0x0/0x4b returned 0 after 75 usecs calling cyttsp_spi_driver_init+0x0/0x4b @ 1 SPI driver cyttsp-spi has no spi_device_id for cypress,cy8ctma340 SPI driver cyttsp-spi has no spi_device_id for cypress,cy8ctst341 initcall cyttsp_spi_driver_init+0x0/0x4b returned 0 after 1893 usecs calling da9052_tsi_driver_init+0x0/0x4b @ 1 initcall da9052_tsi_driver_init+0x0/0x4b returned 0 after 137 usecs calling hampshire_drv_init+0x0/0x50 @ 1 initcall hampshire_drv_init+0x0/0x50 returned 0 after 125 usecs calling hycon_hy46xx_driver_init+0x0/0x4b @ 1 initcall hycon_hy46xx_driver_init+0x0/0x4b returned 0 after 140 usecs calling gunze_drv_init+0x0/0x50 @ 1 initcall gunze_drv_init+0x0/0x50 returned 0 after 129 usecs calling eeti_ts_driver_init+0x0/0x4b @ 1 initcall eeti_ts_driver_init+0x0/0x4b returned 0 after 137 usecs calling elants_i2c_driver_init+0x0/0x4b @ 1 initcall elants_i2c_driver_init+0x0/0x4b returned 0 after 100 usecs calling egalax_drv_init+0x0/0x50 @ 1 initcall egalax_drv_init+0x0/0x50 returned 0 after 173 usecs calling exc3000_driver_init+0x0/0x4b @ 1 initcall exc3000_driver_init+0x0/0x4b returned 0 after 131 usecs calling fujitsu_drv_init+0x0/0x50 @ 1 initcall fujitsu_drv_init+0x0/0x50 returned 0 after 112 usecs calling goodix_ts_driver_init+0x0/0x4b @ 1 initcall goodix_ts_driver_init+0x0/0x4b returned 0 after 160 usecs calling imagis_ts_driver_init+0x0/0x4b @ 1 initcall imagis_ts_driver_init+0x0/0x4b returned 0 after 80 usecs calling inexio_drv_init+0x0/0x50 @ 1 initcall inexio_drv_init+0x0/0x50 returned 0 after 128 usecs calling max11801_ts_driver_init+0x0/0x4b @ 1 initcall max11801_ts_driver_init+0x0/0x4b returned 0 after 147 usecs calling mip4_driver_init+0x0/0x4b @ 1 initcall mip4_driver_init+0x0/0x4b returned 0 after 103 usecs calling mms114_driver_init+0x0/0x4b @ 1 initcall mms114_driver_init+0x0/0x4b returned 0 after 97 usecs calling mtouch_drv_init+0x0/0x50 @ 1 initcall mtouch_drv_init+0x0/0x50 returned 0 after 136 usecs calling mk712_init+0x0/0x35a @ 1 mk712: device not present initcall mk712_init+0x0/0x35a returned -19 after 577 usecs calling usbtouch_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver usbtouchscreen initcall usbtouch_driver_init+0x0/0x50 returned 0 after 1022 usecs calling pm_drv_init+0x0/0x50 @ 1 initcall pm_drv_init+0x0/0x50 returned 0 after 163 usecs calling pixcir_i2c_ts_driver_init+0x0/0x4b @ 1 initcall pixcir_i2c_ts_driver_init+0x0/0x4b returned 0 after 143 usecs calling s6sy761_driver_init+0x0/0x4b @ 1 initcall s6sy761_driver_init+0x0/0x4b returned 0 after 80 usecs calling silead_ts_driver_init+0x0/0x4b @ 1 initcall silead_ts_driver_init+0x0/0x4b returned 0 after 96 usecs calling st1232_ts_driver_init+0x0/0x4b @ 1 initcall st1232_ts_driver_init+0x0/0x4b returned 0 after 75 usecs calling touchit213_drv_init+0x0/0x50 @ 1 zero gadget.0: resume initcall touchit213_drv_init+0x0/0x50 returned 0 after 129 usecs zero gadget.0: zero_resume calling tw_drv_init+0x0/0x50 @ 1 dummy_hcd dummy_hcd.0: port status 0x00100503 has changes initcall tw_drv_init+0x0/0x50 returned 0 after 160 usecs calling tsc2005_driver_init+0x0/0x4b @ 1 initcall tsc2005_driver_init+0x0/0x4b returned 0 after 119 usecs calling tsc2007_driver_init+0x0/0x4b @ 1 initcall tsc2007_driver_init+0x0/0x4b returned 0 after 84 usecs calling wdt87xx_driver_init+0x0/0x4b @ 1 initcall wdt87xx_driver_init+0x0/0x4b returned 0 after 75 usecs calling wm831x_ts_driver_init+0x0/0x4b @ 1 initcall wm831x_ts_driver_init+0x0/0x4b returned 0 after 136 usecs calling sx8654_driver_init+0x0/0x4b @ 1 initcall sx8654_driver_init+0x0/0x4b returned 0 after 78 usecs calling tps6507x_ts_driver_init+0x0/0x4b @ 1 initcall tps6507x_ts_driver_init+0x0/0x4b returned 0 after 158 usecs calling zet6223_driver_init+0x0/0x4b @ 1 initcall zet6223_driver_init+0x0/0x4b returned 0 after 79 usecs calling zforce_driver_init+0x0/0x4b @ 1 initcall zforce_driver_init+0x0/0x4b returned 0 after 88 usecs calling iqs5xx_i2c_driver_init+0x0/0x4b @ 1 initcall iqs5xx_i2c_driver_init+0x0/0x4b returned 0 after 75 usecs calling zinitix_ts_driver_init+0x0/0x4b @ 1 initcall zinitix_ts_driver_init+0x0/0x4b returned 0 after 68 usecs calling rmi_bus_init+0x0/0x240 @ 1 initcall rmi_bus_init+0x0/0x240 returned 0 after 492 usecs calling rmi_i2c_driver_init+0x0/0x4b @ 1 initcall rmi_i2c_driver_init+0x0/0x4b returned 0 after 78 usecs calling rmi_smb_driver_init+0x0/0x4b @ 1 initcall rmi_smb_driver_init+0x0/0x4b returned 0 after 81 usecs calling smbalert_driver_init+0x0/0x4b @ 1 initcall smbalert_driver_init+0x0/0x4b returned 0 after 77 usecs calling i2c_dev_init+0x0/0x19c @ 1 i2c_dev: i2c /dev entries driver initcall i2c_dev_init+0x0/0x19c returned 0 after 611 usecs calling ali1535_driver_init+0x0/0x50 @ 1 initcall ali1535_driver_init+0x0/0x50 returned 0 after 127 usecs calling ali1563_pci_driver_init+0x0/0x50 @ 1 initcall ali1563_pci_driver_init+0x0/0x50 returned 0 after 111 usecs calling ali15x3_driver_init+0x0/0x50 @ 1 initcall ali15x3_driver_init+0x0/0x50 returned 0 after 109 usecs calling nforce2_driver_init+0x0/0x50 @ 1 initcall nforce2_driver_init+0x0/0x50 returned 0 after 137 usecs calling nforce2_s4985_init+0x0/0x42b @ 1 initcall nforce2_s4985_init+0x0/0x42b returned -19 after 1 usecs calling gpu_i2c_driver_init+0x0/0x50 @ 1 initcall gpu_i2c_driver_init+0x0/0x50 returned 0 after 141 usecs calling piix4_driver_init+0x0/0x50 @ 1 piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 initcall piix4_driver_init+0x0/0x50 returned 0 after 4821 usecs calling sis630_driver_init+0x0/0x50 @ 1 initcall sis630_driver_init+0x0/0x50 returned 0 after 168 usecs calling sis96x_driver_init+0x0/0x50 @ 1 initcall sis96x_driver_init+0x0/0x50 returned 0 after 112 usecs calling vt586b_driver_init+0x0/0x50 @ 1 initcall vt586b_driver_init+0x0/0x50 returned 0 after 108 usecs calling i2c_vt596_init+0x0/0x50 @ 1 initcall i2c_vt596_init+0x0/0x50 returned 0 after 99 usecs calling cbus_i2c_driver_init+0x0/0x4b @ 1 initcall cbus_i2c_driver_init+0x0/0x4b returned 0 after 135 usecs calling dw_i2c_driver_init+0x0/0x50 @ 1 usb 1-1: new high-speed USB device number 2 using dummy_hcd initcall dw_i2c_driver_init+0x0/0x50 returned 0 after 120 usecs calling em_i2c_driver_init+0x0/0x4b @ 1 initcall em_i2c_driver_init+0x0/0x4b returned 0 after 102 usecs calling kempld_i2c_driver_init+0x0/0x4b @ 1 initcall kempld_i2c_driver_init+0x0/0x4b returned 0 after 102 usecs calling ce4100_i2c_driver_init+0x0/0x50 @ 1 initcall ce4100_i2c_driver_init+0x0/0x50 returned 0 after 127 usecs calling simtec_i2c_driver_init+0x0/0x4b @ 1 initcall simtec_i2c_driver_init+0x0/0x4b returned 0 after 98 usecs calling diolan_u2c_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver i2c-diolan-u2c initcall diolan_u2c_driver_init+0x0/0x50 returned 0 after 968 usecs calling cp2615_i2c_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver i2c-cp2615 initcall cp2615_i2c_driver_init+0x0/0x50 returned 0 after 933 usecs calling i2c_parport_driver_init+0x0/0x50 @ 1 i2c-parport: adapter type unspecified initcall i2c_parport_driver_init+0x0/0x50 returned 0 after 785 usecs calling pci1xxxx_i2c_pci_driver_init+0x0/0x50 @ 1 initcall pci1xxxx_i2c_pci_driver_init+0x0/0x50 returned 0 after 117 usecs calling osif_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF initcall osif_driver_init+0x0/0x50 returned 0 after 1149 usecs calling taos_drv_init+0x0/0x50 @ 1 initcall taos_drv_init+0x0/0x50 returned 0 after 170 usecs calling i2c_tiny_usb_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver i2c-tiny-usb initcall i2c_tiny_usb_driver_init+0x0/0x50 returned 0 after 965 usecs calling fsi_i2c_driver_init+0x0/0x49 @ 1 initcall fsi_i2c_driver_init+0x0/0x49 returned 0 after 65 usecs calling virtio_i2c_driver_init+0x0/0x49 @ 1 initcall virtio_i2c_driver_init+0x0/0x49 returned 0 after 67 usecs calling i2c_slave_eeprom_driver_init+0x0/0x4b @ 1 initcall i2c_slave_eeprom_driver_init+0x0/0x4b returned 0 after 93 usecs calling cdns_i3c_master_init+0x0/0x4b @ 1 initcall cdns_i3c_master_init+0x0/0x4b returned 0 after 113 usecs calling dw_i3c_driver_init+0x0/0x4b @ 1 initcall dw_i3c_driver_init+0x0/0x4b returned 0 after 126 usecs calling svc_i3c_master_init+0x0/0x4b @ 1 initcall svc_i3c_master_init+0x0/0x4b returned 0 after 95 usecs calling i3c_hci_driver_init+0x0/0x4b @ 1 initcall i3c_hci_driver_init+0x0/0x4b returned 0 after 98 usecs calling init_rc_map_adstech_dvb_t_pci+0x0/0x49 @ 1 initcall init_rc_map_adstech_dvb_t_pci+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_alink_dtu_m+0x0/0x49 @ 1 initcall init_rc_map_alink_dtu_m+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_anysee+0x0/0x49 @ 1 initcall init_rc_map_anysee+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_apac_viewcomp+0x0/0x49 @ 1 initcall init_rc_map_apac_viewcomp+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_t2hybrid+0x0/0x49 @ 1 initcall init_rc_map_t2hybrid+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_asus_pc39+0x0/0x49 @ 1 initcall init_rc_map_asus_pc39+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_asus_ps3_100+0x0/0x49 @ 1 initcall init_rc_map_asus_ps3_100+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_ati_tv_wonder_hd_600+0x0/0x49 @ 1 initcall init_rc_map_ati_tv_wonder_hd_600+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_ati_x10+0x0/0x49 @ 1 initcall init_rc_map_ati_x10+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_avermedia_a16d+0x0/0x49 @ 1 initcall init_rc_map_avermedia_a16d+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_avermedia_cardbus+0x0/0x49 @ 1 initcall init_rc_map_avermedia_cardbus+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_avermedia_dvbt+0x0/0x49 @ 1 initcall init_rc_map_avermedia_dvbt+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_avermedia_m135a+0x0/0x49 @ 1 initcall init_rc_map_avermedia_m135a+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_avermedia_m733a_rm_k6+0x0/0x49 @ 1 initcall init_rc_map_avermedia_m733a_rm_k6+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_avermedia+0x0/0x49 @ 1 initcall init_rc_map_avermedia+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_avermedia_rm_ks+0x0/0x49 @ 1 initcall init_rc_map_avermedia_rm_ks+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_avertv_303+0x0/0x49 @ 1 zero gadget.0: resume initcall init_rc_map_avertv_303+0x0/0x49 returned 0 after 2 usecs zero gadget.0: zero_resume dummy_hcd dummy_hcd.0: port status 0x00100503 has changes calling init_rc_map_azurewave_ad_tu700+0x0/0x49 @ 1 initcall init_rc_map_azurewave_ad_tu700+0x0/0x49 returned 0 after 4 usecs calling init_rc_map_beelink_gs1+0x0/0x49 @ 1 initcall init_rc_map_beelink_gs1+0x0/0x49 returned 0 after 4 usecs calling init_rc_map_behold_columbus+0x0/0x49 @ 1 initcall init_rc_map_behold_columbus+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_behold+0x0/0x49 @ 1 initcall init_rc_map_behold+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_budget_ci_old+0x0/0x49 @ 1 initcall init_rc_map_budget_ci_old+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_cinergy_1400+0x0/0x49 @ 1 initcall init_rc_map_cinergy_1400+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_cinergy+0x0/0x49 @ 1 initcall init_rc_map_cinergy+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_ct_90405+0x0/0x49 @ 1 initcall init_rc_map_ct_90405+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_d680_dmb+0x0/0x49 @ 1 initcall init_rc_map_d680_dmb+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_delock_61959+0x0/0x49 @ 1 initcall init_rc_map_delock_61959+0x0/0x49 returned 0 after 3 usecs calling init_rc_map+0x0/0x49 @ 1 initcall init_rc_map+0x0/0x49 returned 0 after 3 usecs calling init_rc_map+0x0/0x49 @ 1 initcall init_rc_map+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_digitalnow_tinytwin+0x0/0x49 @ 1 initcall init_rc_map_digitalnow_tinytwin+0x0/0x49 returned 0 after 4 usecs calling init_rc_map_digittrade+0x0/0x49 @ 1 initcall init_rc_map_digittrade+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_dm1105_nec+0x0/0x49 @ 1 initcall init_rc_map_dm1105_nec+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_dntv_live_dvb_t+0x0/0x49 @ 1 initcall init_rc_map_dntv_live_dvb_t+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_dntv_live_dvbt_pro+0x0/0x49 @ 1 initcall init_rc_map_dntv_live_dvbt_pro+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_dtt200u+0x0/0x49 @ 1 initcall init_rc_map_dtt200u+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_rc5_dvbsky+0x0/0x49 @ 1 initcall init_rc_map_rc5_dvbsky+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_dvico_mce+0x0/0x49 @ 1 initcall init_rc_map_dvico_mce+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_dvico_portable+0x0/0x49 @ 1 initcall init_rc_map_dvico_portable+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_em_terratec+0x0/0x49 @ 1 initcall init_rc_map_em_terratec+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_encore_enltv2+0x0/0x49 @ 1 initcall init_rc_map_encore_enltv2+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_encore_enltv_fm53+0x0/0x49 @ 1 initcall init_rc_map_encore_enltv_fm53+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_encore_enltv+0x0/0x49 @ 1 initcall init_rc_map_encore_enltv+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_evga_indtube+0x0/0x49 @ 1 initcall init_rc_map_evga_indtube+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_eztv+0x0/0x49 @ 1 initcall init_rc_map_eztv+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_flydvb+0x0/0x49 @ 1 initcall init_rc_map_flydvb+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_flyvideo+0x0/0x49 @ 1 initcall init_rc_map_flyvideo+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_fusionhdtv_mce+0x0/0x49 @ 1 initcall init_rc_map_fusionhdtv_mce+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_gadmei_rm008z+0x0/0x49 @ 1 dummy_udc dummy_udc.0: set_address = 2 initcall init_rc_map_gadmei_rm008z+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_geekbox+0x0/0x49 @ 1 initcall init_rc_map_geekbox+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_genius_tvgo_a11mce+0x0/0x49 @ 1 initcall init_rc_map_genius_tvgo_a11mce+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_gotview7135+0x0/0x49 @ 1 initcall init_rc_map_gotview7135+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_rc5_hauppauge_new+0x0/0x49 @ 1 initcall init_rc_map_rc5_hauppauge_new+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_hisi_poplar+0x0/0x49 @ 1 initcall init_rc_map_hisi_poplar+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_hisi_tv_demo+0x0/0x49 @ 1 initcall init_rc_map_hisi_tv_demo+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_imon_mce+0x0/0x49 @ 1 initcall init_rc_map_imon_mce+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_imon_pad+0x0/0x49 @ 1 initcall init_rc_map_imon_pad+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_imon_rsc+0x0/0x49 @ 1 initcall init_rc_map_imon_rsc+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_iodata_bctv7e+0x0/0x49 @ 1 initcall init_rc_map_iodata_bctv7e+0x0/0x49 returned 0 after 3 usecs calling init_rc_it913x_v1_map+0x0/0x49 @ 1 initcall init_rc_it913x_v1_map+0x0/0x49 returned 0 after 2 usecs calling init_rc_it913x_v2_map+0x0/0x49 @ 1 initcall init_rc_it913x_v2_map+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_kaiomy+0x0/0x49 @ 1 initcall init_rc_map_kaiomy+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_khadas+0x0/0x49 @ 1 initcall init_rc_map_khadas+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_khamsin+0x0/0x49 @ 1 initcall init_rc_map_khamsin+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_kworld_315u+0x0/0x49 @ 1 initcall init_rc_map_kworld_315u+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_kworld_pc150u+0x0/0x49 @ 1 initcall init_rc_map_kworld_pc150u+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_kworld_plus_tv_analog+0x0/0x49 @ 1 initcall init_rc_map_kworld_plus_tv_analog+0x0/0x49 returned 0 after 3 usecs zero gadget.0: high-speed config #3: source/sink calling init_rc_map_leadtek_y04g0051+0x0/0x49 @ 1 zero gadget.0: source/sink disabled initcall init_rc_map_leadtek_y04g0051+0x0/0x49 returned 0 after 3 usecs dummy_udc dummy_udc.0: enabled ep1in-bulk (ep1in-bulk) maxpacket 512 stream disabled dummy_udc dummy_udc.0: enabled ep2out-bulk (ep2out-bulk) maxpacket 512 stream disabled calling init_rc_lme2510_map+0x0/0x49 @ 1 zero gadget.0: source/sink enabled, alt intf 0 initcall init_rc_lme2510_map+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_manli+0x0/0x49 @ 1 initcall init_rc_map_manli+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_mecool_kiii_pro+0x0/0x49 @ 1 initcall init_rc_map_mecool_kiii_pro+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_mecool_kii_pro+0x0/0x49 @ 1 initcall init_rc_map_mecool_kii_pro+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_medion_x10_digitainer+0x0/0x49 @ 1 initcall init_rc_map_medion_x10_digitainer+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_medion_x10+0x0/0x49 @ 1 initcall init_rc_map_medion_x10+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_medion_x10_or2x+0x0/0x49 @ 1 initcall init_rc_map_medion_x10_or2x+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_minix_neo+0x0/0x49 @ 1 initcall init_rc_map_minix_neo+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_msi_digivox_iii+0x0/0x49 @ 1 initcall init_rc_map_msi_digivox_iii+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_msi_digivox_ii+0x0/0x49 @ 1 initcall init_rc_map_msi_digivox_ii+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_msi_tvanywhere+0x0/0x49 @ 1 initcall init_rc_map_msi_tvanywhere+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_msi_tvanywhere_plus+0x0/0x49 @ 1 initcall init_rc_map_msi_tvanywhere_plus+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_nebula+0x0/0x49 @ 1 initcall init_rc_map_nebula+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_nec_terratec_cinergy_xs+0x0/0x49 @ 1 initcall init_rc_map_nec_terratec_cinergy_xs+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_norwood+0x0/0x49 @ 1 initcall init_rc_map_norwood+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_npgtech+0x0/0x49 @ 1 initcall init_rc_map_npgtech+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_odroid+0x0/0x49 @ 1 initcall init_rc_map_odroid+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_pctv_sedna+0x0/0x49 @ 1 initcall init_rc_map_pctv_sedna+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_pine64+0x0/0x49 @ 1 initcall init_rc_map_pine64+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_pinnacle_color+0x0/0x49 @ 1 initcall init_rc_map_pinnacle_color+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_pinnacle_grey+0x0/0x49 @ 1 initcall init_rc_map_pinnacle_grey+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_pinnacle_pctv_hd+0x0/0x49 @ 1 initcall init_rc_map_pinnacle_pctv_hd+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_pixelview+0x0/0x49 @ 1 initcall init_rc_map_pixelview+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_pixelview+0x0/0x49 @ 1 initcall init_rc_map_pixelview+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_pixelview_new+0x0/0x49 @ 1 initcall init_rc_map_pixelview_new+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_pixelview+0x0/0x49 @ 1 initcall init_rc_map_pixelview+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_powercolor_real_angel+0x0/0x49 @ 1 initcall init_rc_map_powercolor_real_angel+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_proteus_2309+0x0/0x49 @ 1 initcall init_rc_map_proteus_2309+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_purpletv+0x0/0x49 @ 1 initcall init_rc_map_purpletv+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_pv951+0x0/0x49 @ 1 initcall init_rc_map_pv951+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_rc6_mce+0x0/0x49 @ 1 initcall init_rc_map_rc6_mce+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_real_audio_220_32_keys+0x0/0x49 @ 1 initcall init_rc_map_real_audio_220_32_keys+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_reddo+0x0/0x49 @ 1 initcall init_rc_map_reddo+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_snapstream_firefly+0x0/0x49 @ 1 initcall init_rc_map_snapstream_firefly+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_streamzap+0x0/0x49 @ 1 initcall init_rc_map_streamzap+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_su3000+0x0/0x49 @ 1 initcall init_rc_map_su3000+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_tanix_tx3mini+0x0/0x49 @ 1 initcall init_rc_map_tanix_tx3mini+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_tanix_tx5max+0x0/0x49 @ 1 initcall init_rc_map_tanix_tx5max+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_tbs_nec+0x0/0x49 @ 1 initcall init_rc_map_tbs_nec+0x0/0x49 returned 0 after 3 usecs calling init_rc_map+0x0/0x49 @ 1 initcall init_rc_map+0x0/0x49 returned 0 after 2 usecs calling init_rc_map+0x0/0x49 @ 1 initcall init_rc_map+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_terratec_cinergy_c_pci+0x0/0x49 @ 1 initcall init_rc_map_terratec_cinergy_c_pci+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_terratec_cinergy_s2_hd+0x0/0x49 @ 1 initcall init_rc_map_terratec_cinergy_s2_hd+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_terratec_cinergy_xs+0x0/0x49 @ 1 initcall init_rc_map_terratec_cinergy_xs+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_terratec_slim_2+0x0/0x49 @ 1 initcall init_rc_map_terratec_slim_2+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_terratec_slim+0x0/0x49 @ 1 initcall init_rc_map_terratec_slim+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_tevii_nec+0x0/0x49 @ 1 initcall init_rc_map_tevii_nec+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_tivo+0x0/0x49 @ 1 initcall init_rc_map_tivo+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_total_media_in_hand_02+0x0/0x49 @ 1 initcall init_rc_map_total_media_in_hand_02+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_total_media_in_hand+0x0/0x49 @ 1 initcall init_rc_map_total_media_in_hand+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_trekstor+0x0/0x49 @ 1 initcall init_rc_map_trekstor+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_tt_1500+0x0/0x49 @ 1 initcall init_rc_map_tt_1500+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_twinhan_vp1027+0x0/0x49 @ 1 initcall init_rc_map_twinhan_vp1027+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_twinhan_dtv_cab_ci+0x0/0x49 @ 1 initcall init_rc_map_twinhan_dtv_cab_ci+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_vega_s9x+0x0/0x49 @ 1 initcall init_rc_map_vega_s9x+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_videomate_k100+0x0/0x49 @ 1 initcall init_rc_map_videomate_k100+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_videomate_s350+0x0/0x49 @ 1 initcall init_rc_map_videomate_s350+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_videomate_tv_pvr+0x0/0x49 @ 1 initcall init_rc_map_videomate_tv_pvr+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_kii_pro+0x0/0x49 @ 1 initcall init_rc_map_kii_pro+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_wetek_hub+0x0/0x49 @ 1 initcall init_rc_map_wetek_hub+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_wetek_play2+0x0/0x49 @ 1 initcall init_rc_map_wetek_play2+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_winfast+0x0/0x49 @ 1 initcall init_rc_map_winfast+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_winfast_usbii_deluxe+0x0/0x49 @ 1 initcall init_rc_map_winfast_usbii_deluxe+0x0/0x49 returned 0 after 2 usecs calling init_rc_map_x96max+0x0/0x49 @ 1 initcall init_rc_map_x96max+0x0/0x49 returned 0 after 3 usecs calling init_rc_map+0x0/0x49 @ 1 initcall init_rc_map+0x0/0x49 returned 0 after 3 usecs calling init_rc_map+0x0/0x49 @ 1 initcall init_rc_map+0x0/0x49 returned 0 after 3 usecs calling init_rc_map_zx_irdec+0x0/0x49 @ 1 initcall init_rc_map_zx_irdec+0x0/0x49 returned 0 after 3 usecs calling ir_jvc_decode_init+0x0/0x64 @ 1 IR JVC protocol handler initialized initcall ir_jvc_decode_init+0x0/0x64 returned 0 after 723 usecs calling ir_rc5_decode_init+0x0/0x64 @ 1 IR RC5(x/sz) protocol handler initialized initcall ir_rc5_decode_init+0x0/0x64 returned 0 after 698 usecs calling ir_rc6_decode_init+0x0/0x64 @ 1 IR RC6 protocol handler initialized initcall ir_rc6_decode_init+0x0/0x64 returned 0 after 615 usecs calling ir_rcmm_decode_init+0x0/0x64 @ 1 IR RCMM protocol handler initialized initcall ir_rcmm_decode_init+0x0/0x64 returned 0 after 645 usecs calling ir_sanyo_decode_init+0x0/0x64 @ 1 IR SANYO protocol handler initialized initcall ir_sanyo_decode_init+0x0/0x64 returned 0 after 671 usecs calling ir_sharp_decode_init+0x0/0x64 @ 1 IR Sharp protocol handler initialized initcall ir_sharp_decode_init+0x0/0x64 returned 0 after 642 usecs calling ir_xmp_decode_init+0x0/0x64 @ 1 IR XMP protocol handler initialized initcall ir_xmp_decode_init+0x0/0x64 returned 0 after 614 usecs calling gpio_ir_recv_driver_init+0x0/0x4b @ 1 initcall gpio_ir_recv_driver_init+0x0/0x4b returned 0 after 138 usecs calling gpio_ir_tx_driver_init+0x0/0x4b @ 1 initcall gpio_ir_tx_driver_init+0x0/0x4b returned 0 after 104 usecs calling iguanair_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver iguanair initcall iguanair_driver_init+0x0/0x50 returned 0 after 889 usecs calling imon_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver imon initcall imon_driver_init+0x0/0x50 returned 0 after 918 usecs calling imon_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver imon_raw initcall imon_driver_init+0x0/0x50 returned 0 after 915 usecs calling ir_spi_driver_init+0x0/0x4b @ 1 SPI driver ir-spi has no spi_device_id for ir-spi-led initcall ir_spi_driver_init+0x0/0x4b returned 0 after 993 usecs calling streamzap_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver streamzap initcall streamzap_driver_init+0x0/0x50 returned 0 after 921 usecs calling irtoy_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver ir_toy initcall irtoy_driver_init+0x0/0x50 returned 0 after 912 usecs calling ttusbir_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver ttusbir initcall ttusbir_driver_init+0x0/0x50 returned 0 after 907 usecs calling ati_remote_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver ati_remote initcall ati_remote_driver_init+0x0/0x50 returned 0 after 941 usecs calling loop_init+0x0/0x229 @ 1 Registered IR keymap rc-empty rc rc0: rc-core loopback device as /devices/virtual/rc/rc0 rc rc0: lirc_dev: driver rc-loopback registered at minor = 0, raw IR receiver, raw IR transmitter input: rc-core loopback device as /devices/virtual/rc/rc0/input3 evbug: Connected device: input3 (rc-core loopback device at rc-core/virtual) initcall loop_init+0x0/0x229 returned 0 after 6217 usecs calling ch7322_i2c_driver_init+0x0/0x4b @ 1 initcall ch7322_i2c_driver_init+0x0/0x4b returned 0 after 129 usecs calling pulse8_drv_init+0x0/0x50 @ 1 initcall pulse8_drv_init+0x0/0x50 returned 0 after 171 usecs calling rain_drv_init+0x0/0x50 @ 1 initcall rain_drv_init+0x0/0x50 returned 0 after 198 usecs calling w1_init+0x0/0x198 @ 1 Driver for 1-wire Dallas network protocol. initcall w1_init+0x0/0x198 returned 0 after 975 usecs calling ds_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver DS9490R initcall ds_driver_init+0x0/0x50 returned 0 after 840 usecs calling w1_therm_init+0x0/0xf6 @ 1 initcall w1_therm_init+0x0/0xf6 returned 0 after 90 usecs calling w1_smem_init+0x0/0xc0 @ 1 initcall w1_smem_init+0x0/0xc0 returned 0 after 8 usecs calling w1_family_ds2405_init+0x0/0x49 @ 1 initcall w1_family_ds2405_init+0x0/0x49 returned 0 after 5 usecs calling w1_family_3a_init+0x0/0x49 @ 1 initcall w1_family_3a_init+0x0/0x49 returned 0 after 5 usecs calling w1_family_12_init+0x0/0x49 @ 1 initcall w1_family_12_init+0x0/0x49 returned 0 after 5 usecs calling w1_family_1d_init+0x0/0x49 @ 1 initcall w1_family_1d_init+0x0/0x49 returned 0 after 5 usecs calling w1_family_2d_init+0x0/0x49 @ 1 initcall w1_family_2d_init+0x0/0x49 returned 0 after 6 usecs calling w1_family_0d_init+0x0/0x49 @ 1 initcall w1_family_0d_init+0x0/0x49 returned 0 after 6 usecs calling w1_family_23_init+0x0/0x49 @ 1 initcall w1_family_23_init+0x0/0x49 returned 0 after 6 usecs calling w1_ds2438_family_init+0x0/0x49 @ 1 initcall w1_ds2438_family_init+0x0/0x49 returned 0 after 5 usecs calling w1_ds250x_init+0x0/0x170 @ 1 initcall w1_ds250x_init+0x0/0x170 returned 0 after 13 usecs calling w1_ds2780_family_init+0x0/0x49 @ 1 initcall w1_ds2780_family_init+0x0/0x49 returned 0 after 5 usecs calling w1_ds2781_family_init+0x0/0x49 @ 1 initcall w1_ds2781_family_init+0x0/0x49 returned 0 after 6 usecs calling pda_power_pdrv_init+0x0/0x4b @ 1 initcall pda_power_pdrv_init+0x0/0x4b returned 0 after 175 usecs calling ip5xxx_power_driver_init+0x0/0x4b @ 1 initcall ip5xxx_power_driver_init+0x0/0x4b returned 0 after 94 usecs calling wm831x_backup_driver_init+0x0/0x4b @ 1 initcall wm831x_backup_driver_init+0x0/0x4b returned 0 after 106 usecs calling wm831x_power_driver_init+0x0/0x4b @ 1 initcall wm831x_power_driver_init+0x0/0x4b returned 0 after 97 usecs calling adp5061_driver_init+0x0/0x4b @ 1 initcall adp5061_driver_init+0x0/0x4b returned 0 after 91 usecs calling act8945a_charger_driver_init+0x0/0x4b @ 1 initcall act8945a_charger_driver_init+0x0/0x4b returned 0 after 105 usecs calling cw_bat_driver_init+0x0/0x4b @ 1 initcall cw_bat_driver_init+0x0/0x4b returned 0 after 93 usecs calling w1_ds2760_family_init+0x0/0x49 @ 1 initcall w1_ds2760_family_init+0x0/0x49 returned 0 after 8 usecs calling ds2780_battery_driver_init+0x0/0x4b @ 1 initcall ds2780_battery_driver_init+0x0/0x4b returned 0 after 117 usecs calling ds278x_battery_driver_init+0x0/0x4b @ 1 initcall ds278x_battery_driver_init+0x0/0x4b returned 0 after 95 usecs calling goldfish_battery_device_init+0x0/0x4b @ 1 initcall goldfish_battery_device_init+0x0/0x4b returned 0 after 113 usecs calling sbs_battery_driver_init+0x0/0x4b @ 1 initcall sbs_battery_driver_init+0x0/0x4b returned 0 after 114 usecs calling bq27xxx_battery_i2c_driver_init+0x0/0x4b @ 1 initcall bq27xxx_battery_i2c_driver_init+0x0/0x4b returned 0 after 81 usecs calling bq27xxx_battery_hdq_init+0x0/0x76 @ 1 initcall bq27xxx_battery_hdq_init+0x0/0x76 returned -17 after 7 usecs calling da9150_fg_driver_init+0x0/0x4b @ 1 initcall da9150_fg_driver_init+0x0/0x4b returned 0 after 120 usecs calling max17040_i2c_driver_init+0x0/0x4b @ 1 initcall max17040_i2c_driver_init+0x0/0x4b returned 0 after 95 usecs calling max17042_i2c_driver_init+0x0/0x4b @ 1 initcall max17042_i2c_driver_init+0x0/0x4b returned 0 after 83 usecs calling w1_max1721x_family_init+0x0/0x49 @ 1 initcall w1_max1721x_family_init+0x0/0x49 returned -17 after 7 usecs calling rt9455_driver_init+0x0/0x4b @ 1 initcall rt9455_driver_init+0x0/0x4b returned 0 after 98 usecs calling max8903_driver_init+0x0/0x4b @ 1 initcall max8903_driver_init+0x0/0x4b returned 0 after 127 usecs calling lp8727_driver_init+0x0/0x4b @ 1 initcall lp8727_driver_init+0x0/0x4b returned 0 after 98 usecs calling gpio_charger_driver_init+0x0/0x4b @ 1 initcall gpio_charger_driver_init+0x0/0x4b returned 0 after 98 usecs calling lt3651_charger_driver_init+0x0/0x4b @ 1 initcall lt3651_charger_driver_init+0x0/0x4b returned 0 after 111 usecs calling ltc4162l_driver_init+0x0/0x4b @ 1 initcall ltc4162l_driver_init+0x0/0x4b returned 0 after 88 usecs calling max14656_i2c_driver_init+0x0/0x4b @ 1 initcall max14656_i2c_driver_init+0x0/0x4b returned 0 after 86 usecs calling max77693_charger_driver_init+0x0/0x4b @ 1 initcall max77693_charger_driver_init+0x0/0x4b returned 0 after 103 usecs calling mt6360_charger_driver_init+0x0/0x4b @ 1 initcall mt6360_charger_driver_init+0x0/0x4b returned 0 after 97 usecs calling bq24190_driver_init+0x0/0x4b @ 1 initcall bq24190_driver_init+0x0/0x4b returned 0 after 87 usecs calling bq2515x_driver_init+0x0/0x4b @ 1 initcall bq2515x_driver_init+0x0/0x4b returned 0 after 81 usecs calling bq25890_driver_init+0x0/0x4b @ 1 initcall bq25890_driver_init+0x0/0x4b returned 0 after 111 usecs calling bq25980_driver_init+0x0/0x4b @ 1 initcall bq25980_driver_init+0x0/0x4b returned 0 after 71 usecs calling bq256xx_driver_init+0x0/0x4b @ 1 initcall bq256xx_driver_init+0x0/0x4b returned 0 after 74 usecs calling smb347_driver_init+0x0/0x4b @ 1 initcall smb347_driver_init+0x0/0x4b returned 0 after 102 usecs calling tps65217_charger_driver_init+0x0/0x4b @ 1 initcall tps65217_charger_driver_init+0x0/0x4b returned 0 after 107 usecs calling ucs1002_driver_init+0x0/0x4b @ 1 initcall ucs1002_driver_init+0x0/0x4b returned 0 after 88 usecs calling bd9995x_driver_init+0x0/0x4b @ 1 initcall bd9995x_driver_init+0x0/0x4b returned 0 after 81 usecs calling ug3105_i2c_driver_init+0x0/0x4b @ 1 initcall ug3105_i2c_driver_init+0x0/0x4b returned 0 after 78 usecs calling w83773_driver_init+0x0/0x4b @ 1 initcall w83773_driver_init+0x0/0x4b returned 0 after 73 usecs calling w83792d_driver_init+0x0/0x4b @ 1 initcall w83792d_driver_init+0x0/0x4b returned 0 after 8328 usecs calling w83793_driver_init+0x0/0x4b @ 1 initcall w83793_driver_init+0x0/0x4b returned 0 after 8295 usecs calling sensors_w83781d_init+0x0/0x6e @ 1 initcall sensors_w83781d_init+0x0/0x6e returned 0 after 16278 usecs calling w83791d_driver_init+0x0/0x4b @ 1 initcall w83791d_driver_init+0x0/0x4b returned 0 after 8402 usecs calling ad7314_driver_init+0x0/0x4b @ 1 initcall ad7314_driver_init+0x0/0x4b returned 0 after 132 usecs calling ad7414_driver_init+0x0/0x4b @ 1 initcall ad7414_driver_init+0x0/0x4b returned 0 after 102 usecs calling adc128_driver_init+0x0/0x4b @ 1 initcall adc128_driver_init+0x0/0x4b returned 0 after 11873 usecs calling adcxx_driver_init+0x0/0x4b @ 1 initcall adcxx_driver_init+0x0/0x4b returned 0 after 105 usecs calling adm1021_driver_init+0x0/0x4b @ 1 initcall adm1021_driver_init+0x0/0x4b returned 0 after 17561 usecs calling adm1025_driver_init+0x0/0x4b @ 1 initcall adm1025_driver_init+0x0/0x4b returned 0 after 6220 usecs calling adm1026_driver_init+0x0/0x4b @ 1 initcall adm1026_driver_init+0x0/0x4b returned 0 after 6238 usecs calling adm1031_driver_init+0x0/0x4b @ 1 initcall adm1031_driver_init+0x0/0x4b returned 0 after 6210 usecs calling adm1177_driver_init+0x0/0x4b @ 1 initcall adm1177_driver_init+0x0/0x4b returned 0 after 212 usecs calling adm9240_driver_init+0x0/0x4b @ 1 initcall adm9240_driver_init+0x0/0x4b returned 0 after 8300 usecs calling adt7411_driver_init+0x0/0x4b @ 1 initcall adt7411_driver_init+0x0/0x4b returned 0 after 6142 usecs calling adt7475_driver_init+0x0/0x4b @ 1 initcall adt7475_driver_init+0x0/0x4b returned 0 after 6208 usecs calling aht10_driver_init+0x0/0x4b @ 1 initcall aht10_driver_init+0x0/0x4b returned 0 after 207 usecs calling as370_hwmon_driver_init+0x0/0x4b @ 1 initcall as370_hwmon_driver_init+0x0/0x4b returned 0 after 198 usecs calling sm_asc7621_init+0x0/0x26d @ 1 initcall sm_asc7621_init+0x0/0x26d returned 0 after 6274 usecs calling atxp1_driver_init+0x0/0x4b @ 1 initcall atxp1_driver_init+0x0/0x4b returned 0 after 339 usecs calling axi_fan_control_driver_init+0x0/0x4b @ 1 initcall axi_fan_control_driver_init+0x0/0x4b returned 0 after 116 usecs calling coretemp_init+0x0/0x1a2 @ 1 initcall coretemp_init+0x0/0x1a2 returned -19 after 2 usecs calling da9052_hwmon_driver_init+0x0/0x4b @ 1 initcall da9052_hwmon_driver_init+0x0/0x4b returned 0 after 209 usecs calling da9055_hwmon_driver_init+0x0/0x4b @ 1 initcall da9055_hwmon_driver_init+0x0/0x4b returned 0 after 198 usecs calling i8k_init+0x0/0x1e0 @ 1 initcall i8k_init+0x0/0x1e0 returned -19 after 1 usecs calling dme1737_init+0x0/0x262 @ 1 initcall dme1737_init+0x0/0x262 returned 0 after 5693 usecs calling drivetemp_init+0x0/0x49 @ 1 initcall drivetemp_init+0x0/0x49 returned 0 after 324 usecs calling ds620_driver_init+0x0/0x4b @ 1 initcall ds620_driver_init+0x0/0x4b returned 0 after 115 usecs calling emc2103_driver_init+0x0/0x4b @ 1 initcall emc2103_driver_init+0x0/0x4b returned 0 after 1482 usecs calling emc2305_driver_init+0x0/0x4b @ 1 initcall emc2305_driver_init+0x0/0x4b returned 0 after 181 usecs calling f71805f_init+0x0/0x17e @ 1 initcall f71805f_init+0x0/0x17e returned -19 after 64 usecs calling f71882fg_init+0x0/0x167 @ 1 f71882fg: Not a Fintek device f71882fg: Not a Fintek device initcall f71882fg_init+0x0/0x167 returned -19 after 1459 usecs calling fschmd_driver_init+0x0/0x4b @ 1 initcall fschmd_driver_init+0x0/0x4b returned 0 after 2455 usecs calling g760a_driver_init+0x0/0x4b @ 1 initcall g760a_driver_init+0x0/0x4b returned 0 after 110 usecs calling g762_driver_init+0x0/0x4b @ 1 initcall g762_driver_init+0x0/0x4b returned 0 after 95 usecs calling gl518_driver_init+0x0/0x4b @ 1 initcall gl518_driver_init+0x0/0x4b returned 0 after 3631 usecs calling gl520_driver_init+0x0/0x4b @ 1 initcall gl520_driver_init+0x0/0x4b returned 0 after 4258 usecs calling gsc_hwmon_driver_init+0x0/0x4b @ 1 initcall gsc_hwmon_driver_init+0x0/0x4b returned 0 after 216 usecs calling gpio_fan_driver_init+0x0/0x4b @ 1 initcall gpio_fan_driver_init+0x0/0x4b returned 0 after 214 usecs calling i5k_amb_init+0x0/0x15b @ 1 initcall i5k_amb_init+0x0/0x15b returned 0 after 819 usecs calling ina209_driver_init+0x0/0x4b @ 1 initcall ina209_driver_init+0x0/0x4b returned 0 after 108 usecs calling ina2xx_driver_init+0x0/0x4b @ 1 initcall ina2xx_driver_init+0x0/0x4b returned 0 after 91 usecs calling ina238_driver_init+0x0/0x4b @ 1 initcall ina238_driver_init+0x0/0x4b returned 0 after 87 usecs calling sm_it87_init+0x0/0x2df @ 1 initcall sm_it87_init+0x0/0x2df returned -19 after 349 usecs calling jc42_driver_init+0x0/0x4b @ 1 initcall jc42_driver_init+0x0/0x4b returned 0 after 16299 usecs calling pem_driver_init+0x0/0x4b @ 1 initcall pem_driver_init+0x0/0x4b returned 0 after 117 usecs calling lm63_driver_init+0x0/0x4b @ 1 initcall lm63_driver_init+0x0/0x4b returned 0 after 6446 usecs calling lm70_driver_init+0x0/0x4b @ 1 initcall lm70_driver_init+0x0/0x4b returned 0 after 199 usecs calling lm73_driver_init+0x0/0x4b @ 1 initcall lm73_driver_init+0x0/0x4b returned 0 after 12416 usecs calling lm75_driver_init+0x0/0x4b @ 1 initcall lm75_driver_init+0x0/0x4b returned 0 after 16219 usecs calling lm77_driver_init+0x0/0x4b @ 1 initcall lm77_driver_init+0x0/0x4b returned 0 after 8309 usecs calling sm_lm78_init+0x0/0x6e @ 1 initcall sm_lm78_init+0x0/0x6e returned 0 after 16344 usecs calling lm85_driver_init+0x0/0x4b @ 1 initcall lm85_driver_init+0x0/0x4b returned 0 after 6210 usecs calling lm92_driver_init+0x0/0x4b @ 1 initcall lm92_driver_init+0x0/0x4b returned 0 after 8314 usecs calling lm95234_driver_init+0x0/0x4b @ 1 initcall lm95234_driver_init+0x0/0x4b returned 0 after 10261 usecs calling lm95245_driver_init+0x0/0x4b @ 1 initcall lm95245_driver_init+0x0/0x4b returned 0 after 10245 usecs calling ltc2990_i2c_driver_init+0x0/0x4b @ 1 initcall ltc2990_i2c_driver_init+0x0/0x4b returned 0 after 125 usecs calling ltc2992_i2c_driver_init+0x0/0x4b @ 1 initcall ltc2992_i2c_driver_init+0x0/0x4b returned 0 after 140 usecs calling ltc4215_driver_init+0x0/0x4b @ 1 initcall ltc4215_driver_init+0x0/0x4b returned 0 after 97 usecs calling ltc4222_driver_init+0x0/0x4b @ 1 initcall ltc4222_driver_init+0x0/0x4b returned 0 after 92 usecs calling ltc4245_driver_init+0x0/0x4b @ 1 initcall ltc4245_driver_init+0x0/0x4b returned 0 after 88 usecs calling ltc4260_driver_init+0x0/0x4b @ 1 initcall ltc4260_driver_init+0x0/0x4b returned 0 after 111 usecs calling max1111_driver_init+0x0/0x4b @ 1 initcall max1111_driver_init+0x0/0x4b returned 0 after 78 usecs calling max16065_driver_init+0x0/0x4b @ 1 initcall max16065_driver_init+0x0/0x4b returned 0 after 171 usecs calling max1619_driver_init+0x0/0x4b @ 1 initcall max1619_driver_init+0x0/0x4b returned 0 after 18000 usecs calling max1668_driver_init+0x0/0x4b @ 1 initcall max1668_driver_init+0x0/0x4b returned 0 after 18056 usecs calling max197_driver_init+0x0/0x4b @ 1 initcall max197_driver_init+0x0/0x4b returned 0 after 211 usecs calling max31722_driver_init+0x0/0x4b @ 1 initcall max31722_driver_init+0x0/0x4b returned 0 after 113 usecs calling max31730_driver_init+0x0/0x4b @ 1 initcall max31730_driver_init+0x0/0x4b returned 0 after 16020 usecs calling max31760_driver_init+0x0/0x4b @ 1 initcall max31760_driver_init+0x0/0x4b returned 0 after 128 usecs calling max6639_driver_init+0x0/0x4b @ 1 initcall max6639_driver_init+0x0/0x4b returned 0 after 5972 usecs calling max6642_driver_init+0x0/0x4b @ 1 initcall max6642_driver_init+0x0/0x4b returned 0 after 16171 usecs calling max6697_driver_init+0x0/0x4b @ 1 initcall max6697_driver_init+0x0/0x4b returned 0 after 124 usecs calling max31790_driver_init+0x0/0x4b @ 1 initcall max31790_driver_init+0x0/0x4b returned 0 after 174 usecs calling mc13783_adc_driver_init+0x0/0x50 @ 1 initcall mc13783_adc_driver_init+0x0/0x50 returned -19 after 213 usecs calling mcp3021_driver_init+0x0/0x4b @ 1 initcall mcp3021_driver_init+0x0/0x4b returned 0 after 237 usecs calling tc654_driver_init+0x0/0x4b @ 1 initcall tc654_driver_init+0x0/0x4b returned 0 after 86 usecs calling moortec_pvt_driver_init+0x0/0x4b @ 1 initcall moortec_pvt_driver_init+0x0/0x4b returned 0 after 112 usecs calling sensors_nct6683_init+0x0/0x473 @ 1 initcall sensors_nct6683_init+0x0/0x473 returned -19 after 275 usecs calling sensors_nct6775_platform_init+0x0/0x48b @ 1 initcall sensors_nct6775_platform_init+0x0/0x48b returned -19 after 291 usecs calling nct6775_i2c_driver_init+0x0/0x4b @ 1 initcall nct6775_i2c_driver_init+0x0/0x4b returned 0 after 125 usecs calling pc87360_init+0x0/0x232 @ 1 pc87360: PC8736x not detected, module not inserted initcall pc87360_init+0x0/0x232 returned -19 after 831 usecs calling powr1220_driver_init+0x0/0x4b @ 1 initcall powr1220_driver_init+0x0/0x4b returned 0 after 121 usecs calling sht15_driver_init+0x0/0x4b @ 1 initcall sht15_driver_init+0x0/0x4b returned 0 after 115 usecs calling sht21_driver_init+0x0/0x4b @ 1 initcall sht21_driver_init+0x0/0x4b returned 0 after 99 usecs calling sht4x_driver_init+0x0/0x4b @ 1 initcall sht4x_driver_init+0x0/0x4b returned 0 after 89 usecs calling shtc1_i2c_driver_init+0x0/0x4b @ 1 initcall shtc1_i2c_driver_init+0x0/0x4b returned 0 after 107 usecs calling sm_sis5595_init+0x0/0x50 @ 1 initcall sm_sis5595_init+0x0/0x50 returned 0 after 125 usecs calling smm665_driver_init+0x0/0x4b @ 1 initcall smm665_driver_init+0x0/0x4b returned 0 after 93 usecs calling smsc47b397_init+0x0/0xf5 @ 1 initcall smsc47b397_init+0x0/0xf5 returned -19 after 32 usecs calling sy7636a_sensor_driver_init+0x0/0x4b @ 1 initcall sy7636a_sensor_driver_init+0x0/0x4b returned 0 after 124 usecs calling tc74_driver_init+0x0/0x4b @ 1 initcall tc74_driver_init+0x0/0x4b returned 0 after 153 usecs calling thmc50_driver_init+0x0/0x4b @ 1 initcall thmc50_driver_init+0x0/0x4b returned 0 after 5806 usecs calling tmp102_driver_init+0x0/0x4b @ 1 initcall tmp102_driver_init+0x0/0x4b returned 0 after 196 usecs calling tmp103_driver_init+0x0/0x4b @ 1 initcall tmp103_driver_init+0x0/0x4b returned 0 after 96 usecs calling tmp108_driver_init+0x0/0x4b @ 1 initcall tmp108_driver_init+0x0/0x4b returned 0 after 99 usecs calling tmp421_driver_init+0x0/0x4b @ 1 initcall tmp421_driver_init+0x0/0x4b returned 0 after 9455 usecs calling tmp464_driver_init+0x0/0x4b @ 1 initcall tmp464_driver_init+0x0/0x4b returned 0 after 8239 usecs calling tmp51x_driver_init+0x0/0x4b @ 1 initcall tmp51x_driver_init+0x0/0x4b returned 0 after 225 usecs calling via_cputemp_init+0x0/0x12a @ 1 initcall via_cputemp_init+0x0/0x12a returned -19 after 1 usecs calling sm_via686a_init+0x0/0x50 @ 1 initcall sm_via686a_init+0x0/0x50 returned 0 after 143 usecs calling vt1211_init+0x0/0x1f8 @ 1 initcall vt1211_init+0x0/0x1f8 returned -19 after 62 usecs calling sm_vt8231_init+0x0/0x50 @ 1 initcall sm_vt8231_init+0x0/0x50 returned 0 after 163 usecs calling sensors_w83627ehf_init+0x0/0x1a7 @ 1 initcall sensors_w83627ehf_init+0x0/0x1a7 returned -19 after 83 usecs calling w83l785ts_driver_init+0x0/0x4b @ 1 initcall w83l785ts_driver_init+0x0/0x4b returned 0 after 1824 usecs calling w83l786ng_driver_init+0x0/0x4b @ 1 initcall w83l786ng_driver_init+0x0/0x4b returned 0 after 4068 usecs calling pmbus_core_init+0x0/0x81 @ 1 initcall pmbus_core_init+0x0/0x81 returned 0 after 2 usecs calling pmbus_driver_init+0x0/0x4b @ 1 initcall pmbus_driver_init+0x0/0x4b returned 0 after 121 usecs calling adm1266_driver_init+0x0/0x4b @ 1 initcall adm1266_driver_init+0x0/0x4b returned 0 after 100 usecs calling adm1275_driver_init+0x0/0x4b @ 1 initcall adm1275_driver_init+0x0/0x4b returned 0 after 98 usecs calling pfe_pmbus_driver_init+0x0/0x4b @ 1 initcall pfe_pmbus_driver_init+0x0/0x4b returned 0 after 91 usecs calling fsp3y_driver_init+0x0/0x4b @ 1 initcall fsp3y_driver_init+0x0/0x4b returned 0 after 115 usecs calling ibm_cffps_driver_init+0x0/0x4b @ 1 initcall ibm_cffps_driver_init+0x0/0x4b returned 0 after 88 usecs calling dps920ab_driver_init+0x0/0x4b @ 1 initcall dps920ab_driver_init+0x0/0x4b returned 0 after 113 usecs calling ir35221_driver_init+0x0/0x4b @ 1 initcall ir35221_driver_init+0x0/0x4b returned 0 after 91 usecs calling ir36021_driver_init+0x0/0x4b @ 1 initcall ir36021_driver_init+0x0/0x4b returned 0 after 86 usecs calling ir38064_driver_init+0x0/0x4b @ 1 initcall ir38064_driver_init+0x0/0x4b returned 0 after 87 usecs calling isl68137_driver_init+0x0/0x4b @ 1 initcall isl68137_driver_init+0x0/0x4b returned 0 after 82 usecs calling lt7182s_driver_init+0x0/0x4b @ 1 initcall lt7182s_driver_init+0x0/0x4b returned 0 after 88 usecs calling ltc2978_driver_init+0x0/0x4b @ 1 initcall ltc2978_driver_init+0x0/0x4b returned 0 after 106 usecs calling ltc3815_driver_init+0x0/0x4b @ 1 initcall ltc3815_driver_init+0x0/0x4b returned 0 after 93 usecs calling max16064_driver_init+0x0/0x4b @ 1 initcall max16064_driver_init+0x0/0x4b returned 0 after 88 usecs calling max20730_driver_init+0x0/0x4b @ 1 initcall max20730_driver_init+0x0/0x4b returned 0 after 87 usecs calling max20751_driver_init+0x0/0x4b @ 1 initcall max20751_driver_init+0x0/0x4b returned 0 after 263 usecs calling max31785_driver_init+0x0/0x4b @ 1 initcall max31785_driver_init+0x0/0x4b returned 0 after 87 usecs calling mp2888_driver_init+0x0/0x4b @ 1 initcall mp2888_driver_init+0x0/0x4b returned 0 after 107 usecs calling mp2975_driver_init+0x0/0x4b @ 1 initcall mp2975_driver_init+0x0/0x4b returned 0 after 91 usecs calling mp5023_driver_init+0x0/0x4b @ 1 initcall mp5023_driver_init+0x0/0x4b returned 0 after 87 usecs calling pli1209bc_driver_init+0x0/0x4b @ 1 initcall pli1209bc_driver_init+0x0/0x4b returned 0 after 89 usecs calling pm6764tr_driver_init+0x0/0x4b @ 1 initcall pm6764tr_driver_init+0x0/0x4b returned 0 after 85 usecs calling pxe1610_driver_init+0x0/0x4b @ 1 initcall pxe1610_driver_init+0x0/0x4b returned 0 after 87 usecs calling q54sj108a2_driver_init+0x0/0x4b @ 1 initcall q54sj108a2_driver_init+0x0/0x4b returned 0 after 81 usecs calling tps546d24_driver_init+0x0/0x4b @ 1 initcall tps546d24_driver_init+0x0/0x4b returned 0 after 137 usecs calling ucd9000_driver_init+0x0/0x4b @ 1 initcall ucd9000_driver_init+0x0/0x4b returned 0 after 118 usecs calling xdpe122_driver_init+0x0/0x4b @ 1 initcall xdpe122_driver_init+0x0/0x4b returned 0 after 128 usecs calling xdpe152_driver_init+0x0/0x4b @ 1 initcall xdpe152_driver_init+0x0/0x4b returned 0 after 109 usecs calling pim4328_driver_init+0x0/0x4b @ 1 initcall pim4328_driver_init+0x0/0x4b returned 0 after 99 usecs calling powerclamp_init+0x0/0x2bb @ 1 intel_powerclamp: CPU does not support MWAIT initcall powerclamp_init+0x0/0x2bb returned -19 after 813 usecs calling pkg_temp_thermal_init+0x0/0x1e4 @ 1 initcall pkg_temp_thermal_init+0x0/0x1e4 returned -19 after 1 usecs calling intel_quark_thermal_init+0x0/0xfc @ 1 initcall intel_quark_thermal_init+0x0/0xfc returned -19 after 1 usecs calling intel_pch_thermal_driver_init+0x0/0x50 @ 1 initcall intel_pch_thermal_driver_init+0x0/0x50 returned 0 after 195 usecs calling tcc_cooling_init+0x0/0x16e @ 1 initcall tcc_cooling_init+0x0/0x16e returned -19 after 2 usecs calling thermal_throttle_init_device+0x0/0x93 @ 1 initcall thermal_throttle_init_device+0x0/0x93 returned 0 after 1 usecs calling dt_cpufreq_platdrv_init+0x0/0x4b @ 1 initcall dt_cpufreq_platdrv_init+0x0/0x4b returned 0 after 146 usecs calling powernow_k6_init+0x0/0x13b @ 1 initcall powernow_k6_init+0x0/0x13b returned -19 after 1 usecs calling longrun_init+0x0/0x89 @ 1 initcall longrun_init+0x0/0x89 returned -19 after 1 usecs calling speedstep_init+0x0/0x24b @ 1 initcall speedstep_init+0x0/0x24b returned -19 after 1 usecs calling speedstep_init+0x0/0x32d @ 1 initcall speedstep_init+0x0/0x32d returned -19 after 1 usecs calling nforce2_init+0x0/0x119 @ 1 cpufreq_nforce2: No nForce2 chipset initcall nforce2_init+0x0/0x119 returned -19 after 810 usecs calling intel_pstate_init+0x0/0x788 @ 1 intel_pstate: CPU model not supported initcall intel_pstate_init+0x0/0x788 returned -19 after 773 usecs calling haltpoll_init+0x0/0x24d @ 1 initcall haltpoll_init+0x0/0x24d returned -19 after 4 usecs calling memstick_init+0x0/0x136 @ 1 initcall memstick_init+0x0/0x136 returned 0 after 10534 usecs calling msb_init+0x0/0x8f @ 1 initcall msb_init+0x0/0x8f returned 0 after 69 usecs calling mspro_block_init+0x0/0x121 @ 1 initcall mspro_block_init+0x0/0x121 returned 0 after 179 usecs calling tifm_ms_init+0x0/0x49 @ 1 initcall tifm_ms_init+0x0/0x49 returned 0 after 66 usecs calling jmb38x_ms_driver_init+0x0/0x50 @ 1 initcall jmb38x_ms_driver_init+0x0/0x50 returned 0 after 170 usecs calling rtsx_usb_ms_driver_init+0x0/0x4b @ 1 initcall rtsx_usb_ms_driver_init+0x0/0x4b returned 0 after 116 usecs calling an30259a_driver_init+0x0/0x4b @ 1 initcall an30259a_driver_init+0x0/0x4b returned 0 after 111 usecs calling aw2013_driver_init+0x0/0x4b @ 1 initcall aw2013_driver_init+0x0/0x4b returned 0 after 92 usecs calling bcm6328_leds_driver_init+0x0/0x4b @ 1 initcall bcm6328_leds_driver_init+0x0/0x4b returned 0 after 113 usecs calling bd2802_i2c_driver_init+0x0/0x4b @ 1 initcall bd2802_i2c_driver_init+0x0/0x4b returned 0 after 99 usecs calling blinkm_driver_init+0x0/0x4b @ 1 initcall blinkm_driver_init+0x0/0x4b returned 0 after 2431 usecs calling da903x_led_driver_init+0x0/0x4b @ 1 initcall da903x_led_driver_init+0x0/0x4b returned 0 after 215 usecs calling da9052_led_driver_init+0x0/0x4b @ 1 initcall da9052_led_driver_init+0x0/0x4b returned 0 after 212 usecs calling gpio_led_driver_init+0x0/0x4b @ 1 initcall gpio_led_driver_init+0x0/0x4b returned 0 after 183 usecs calling is31fl319x_driver_init+0x0/0x4b @ 1 initcall is31fl319x_driver_init+0x0/0x4b returned 0 after 130 usecs calling is31fl32xx_driver_init+0x0/0x4b @ 1 initcall is31fl32xx_driver_init+0x0/0x4b returned 0 after 104 usecs calling lm3530_i2c_driver_init+0x0/0x4b @ 1 initcall lm3530_i2c_driver_init+0x0/0x4b returned 0 after 197 usecs calling lm3532_i2c_driver_init+0x0/0x4b @ 1 initcall lm3532_i2c_driver_init+0x0/0x4b returned 0 after 180 usecs calling lm3533_led_driver_init+0x0/0x4b @ 1 initcall lm3533_led_driver_init+0x0/0x4b returned 0 after 114 usecs calling lm355x_i2c_driver_init+0x0/0x4b @ 1 initcall lm355x_i2c_driver_init+0x0/0x4b returned 0 after 99 usecs calling lm3642_i2c_driver_init+0x0/0x4b @ 1 initcall lm3642_i2c_driver_init+0x0/0x4b returned 0 after 11370 usecs calling lm3692x_driver_init+0x0/0x4b @ 1 initcall lm3692x_driver_init+0x0/0x4b returned 0 after 111 usecs calling lp3952_i2c_driver_init+0x0/0x4b @ 1 initcall lp3952_i2c_driver_init+0x0/0x4b returned 0 after 102 usecs calling lp50xx_driver_init+0x0/0x4b @ 1 initcall lp50xx_driver_init+0x0/0x4b returned 0 after 97 usecs calling lp5521_driver_init+0x0/0x4b @ 1 initcall lp5521_driver_init+0x0/0x4b returned 0 after 92 usecs calling lp5523_driver_init+0x0/0x4b @ 1 initcall lp5523_driver_init+0x0/0x4b returned 0 after 95 usecs calling lp8501_driver_init+0x0/0x4b @ 1 initcall lp8501_driver_init+0x0/0x4b returned 0 after 94 usecs calling lp8860_driver_init+0x0/0x4b @ 1 initcall lp8860_driver_init+0x0/0x4b returned 0 after 109 usecs calling lt3593_led_driver_init+0x0/0x4b @ 1 initcall lt3593_led_driver_init+0x0/0x4b returned 0 after 140 usecs calling mlxreg_led_driver_init+0x0/0x4b @ 1 initcall mlxreg_led_driver_init+0x0/0x4b returned 0 after 112 usecs calling ot200_led_driver_init+0x0/0x4b @ 1 initcall ot200_led_driver_init+0x0/0x4b returned 0 after 139 usecs calling pca9532_driver_init+0x0/0x4b @ 1 initcall pca9532_driver_init+0x0/0x4b returned 0 after 102 usecs calling pca963x_driver_init+0x0/0x4b @ 1 initcall pca963x_driver_init+0x0/0x4b returned 0 after 93 usecs calling regulator_led_driver_init+0x0/0x4b @ 1 initcall regulator_led_driver_init+0x0/0x4b returned 0 after 113 usecs calling tca6507_driver_init+0x0/0x4b @ 1 initcall tca6507_driver_init+0x0/0x4b returned 0 after 102 usecs calling tlc591xx_driver_init+0x0/0x4b @ 1 initcall tlc591xx_driver_init+0x0/0x4b returned 0 after 102 usecs calling led_driver_init+0x0/0x4b @ 1 initcall led_driver_init+0x0/0x4b returned 0 after 112 usecs calling cr0014114_driver_init+0x0/0x4b @ 1 SPI driver leds_cr0014114 has no spi_device_id for crane,cr0014114 initcall cr0014114_driver_init+0x0/0x4b returned 0 after 1161 usecs calling el15203000_driver_init+0x0/0x4b @ 1 SPI driver leds_el15203000 has no spi_device_id for crane,el15203000 initcall el15203000_driver_init+0x0/0x4b returned 0 after 1162 usecs calling spi_byte_driver_init+0x0/0x4b @ 1 SPI driver leds_spi_byte has no spi_device_id for ubnt,acb-spi-led initcall spi_byte_driver_init+0x0/0x4b returned 0 after 1141 usecs calling mt6360_led_driver_init+0x0/0x4b @ 1 initcall mt6360_led_driver_init+0x0/0x4b returned 0 after 198 usecs calling aat1290_led_driver_init+0x0/0x4b @ 1 initcall aat1290_led_driver_init+0x0/0x4b returned 0 after 112 usecs calling ktd2692_driver_init+0x0/0x4b @ 1 initcall ktd2692_driver_init+0x0/0x4b returned 0 after 100 usecs calling max77693_led_driver_init+0x0/0x4b @ 1 initcall max77693_led_driver_init+0x0/0x4b returned 0 after 101 usecs calling rt4505_driver_init+0x0/0x4b @ 1 initcall rt4505_driver_init+0x0/0x4b returned 0 after 111 usecs calling rt8515_driver_init+0x0/0x4b @ 1 initcall rt8515_driver_init+0x0/0x4b returned 0 after 183 usecs calling intel_sso_led_driver_init+0x0/0x4b @ 1 initcall intel_sso_led_driver_init+0x0/0x4b returned 0 after 106 usecs calling simatic_ipc_led_driver_init+0x0/0x4b @ 1 initcall simatic_ipc_led_driver_init+0x0/0x4b returned 0 after 175 usecs calling simatic_ipc_led_gpio_driver_init+0x0/0x4b @ 1 initcall simatic_ipc_led_gpio_driver_init+0x0/0x4b returned 0 after 10681 usecs calling fw_cfg_sysfs_init+0x0/0xeb @ 1 initcall fw_cfg_sysfs_init+0x0/0xeb returned 0 after 2131 usecs calling sysfb_init+0x0/0x271 @ 1 initcall sysfb_init+0x0/0x271 returned 0 after 5 usecs calling hid_init+0x0/0x12b @ 1 hid: raw HID events driver (C) Jiri Kosina initcall hid_init+0x0/0x12b returned 0 after 953 usecs calling uhid_misc_init+0x0/0x49 @ 1 initcall uhid_misc_init+0x0/0x49 returned 0 after 448 usecs calling hid_generic_init+0x0/0x50 @ 1 initcall hid_generic_init+0x0/0x50 returned 0 after 182 usecs calling a4_driver_init+0x0/0x50 @ 1 initcall a4_driver_init+0x0/0x50 returned 0 after 95 usecs calling alps_driver_init+0x0/0x50 @ 1 initcall alps_driver_init+0x0/0x50 returned 0 after 111 usecs calling apple_driver_init+0x0/0x50 @ 1 initcall apple_driver_init+0x0/0x50 returned 0 after 132 usecs calling creative_sb0540_driver_init+0x0/0x50 @ 1 initcall creative_sb0540_driver_init+0x0/0x50 returned 0 after 95 usecs calling asus_driver_init+0x0/0x50 @ 1 initcall asus_driver_init+0x0/0x50 returned 0 after 88 usecs calling bigben_driver_init+0x0/0x50 @ 1 initcall bigben_driver_init+0x0/0x50 returned 0 after 95 usecs calling ch_driver_init+0x0/0x50 @ 1 initcall ch_driver_init+0x0/0x50 returned 0 after 94 usecs calling ch_driver_init+0x0/0x50 @ 1 initcall ch_driver_init+0x0/0x50 returned 0 after 104 usecs calling cmedia_init+0x0/0xa0 @ 1 initcall cmedia_init+0x0/0xa0 returned 0 after 286 usecs calling cougar_driver_init+0x0/0x50 @ 1 initcall cougar_driver_init+0x0/0x50 returned 0 after 138 usecs calling cp_driver_init+0x0/0x50 @ 1 initcall cp_driver_init+0x0/0x50 returned 0 after 100 usecs calling dr_driver_init+0x0/0x50 @ 1 initcall dr_driver_init+0x0/0x50 returned 0 after 110 usecs calling ems_driver_init+0x0/0x50 @ 1 initcall ems_driver_init+0x0/0x50 returned 0 after 187 usecs calling elan_driver_init+0x0/0x50 @ 1 initcall elan_driver_init+0x0/0x50 returned 0 after 188 usecs calling elecom_driver_init+0x0/0x50 @ 1 initcall elecom_driver_init+0x0/0x50 returned 0 after 188 usecs calling ez_driver_init+0x0/0x50 @ 1 initcall ez_driver_init+0x0/0x50 returned 0 after 219 usecs calling gfrm_driver_init+0x0/0x50 @ 1 initcall gfrm_driver_init+0x0/0x50 returned 0 after 107 usecs calling hid_vivaldi_init+0x0/0x50 @ 1 initcall hid_vivaldi_init+0x0/0x50 returned 0 after 114 usecs calling gt683r_led_driver_init+0x0/0x50 @ 1 initcall gt683r_led_driver_init+0x0/0x50 returned 0 after 117 usecs calling gyration_driver_init+0x0/0x50 @ 1 initcall gyration_driver_init+0x0/0x50 returned 0 after 112 usecs calling holtek_kbd_driver_init+0x0/0x50 @ 1 initcall holtek_kbd_driver_init+0x0/0x50 returned 0 after 186 usecs calling holtek_mouse_driver_init+0x0/0x50 @ 1 initcall holtek_mouse_driver_init+0x0/0x50 returned 0 after 9282 usecs calling holtek_driver_init+0x0/0x50 @ 1 initcall holtek_driver_init+0x0/0x50 returned 0 after 199 usecs calling icade_driver_init+0x0/0x50 @ 1 initcall icade_driver_init+0x0/0x50 returned 0 after 172 usecs calling ite_driver_init+0x0/0x50 @ 1 initcall ite_driver_init+0x0/0x50 returned 0 after 120 usecs calling keytouch_driver_init+0x0/0x50 @ 1 initcall keytouch_driver_init+0x0/0x50 returned 0 after 120 usecs calling kye_driver_init+0x0/0x50 @ 1 initcall kye_driver_init+0x0/0x50 returned 0 after 210 usecs calling ts_driver_init+0x0/0x50 @ 1 initcall ts_driver_init+0x0/0x50 returned 0 after 148 usecs calling lenovo_driver_init+0x0/0x50 @ 1 initcall lenovo_driver_init+0x0/0x50 returned 0 after 126 usecs calling letsketch_driver_init+0x0/0x50 @ 1 initcall letsketch_driver_init+0x0/0x50 returned 0 after 132 usecs calling lg_driver_init+0x0/0x50 @ 1 initcall lg_driver_init+0x0/0x50 returned 0 after 195 usecs calling lg_g15_driver_init+0x0/0x50 @ 1 initcall lg_g15_driver_init+0x0/0x50 returned 0 after 455 usecs calling logi_djreceiver_driver_init+0x0/0x50 @ 1 initcall logi_djreceiver_driver_init+0x0/0x50 returned 0 after 138 usecs calling hidpp_driver_init+0x0/0x50 @ 1 initcall hidpp_driver_init+0x0/0x50 returned 0 after 183 usecs calling maltron_driver_init+0x0/0x50 @ 1 initcall maltron_driver_init+0x0/0x50 returned 0 after 220 usecs calling mf_driver_init+0x0/0x50 @ 1 initcall mf_driver_init+0x0/0x50 returned 0 after 151 usecs calling mwctrl_driver_init+0x0/0x50 @ 1 initcall mwctrl_driver_init+0x0/0x50 returned 0 after 141 usecs calling ms_driver_init+0x0/0x50 @ 1 initcall ms_driver_init+0x0/0x50 returned 0 after 162 usecs calling mt_driver_init+0x0/0x50 @ 1 initcall mt_driver_init+0x0/0x50 returned 0 after 146 usecs calling ortek_driver_init+0x0/0x50 @ 1 initcall ortek_driver_init+0x0/0x50 returned 0 after 137 usecs calling penmount_driver_init+0x0/0x50 @ 1 initcall penmount_driver_init+0x0/0x50 returned 0 after 146 usecs calling pl_driver_init+0x0/0x50 @ 1 initcall pl_driver_init+0x0/0x50 returned 0 after 144 usecs calling picolcd_driver_init+0x0/0x50 @ 1 initcall picolcd_driver_init+0x0/0x50 returned 0 after 137 usecs calling plantronics_driver_init+0x0/0x50 @ 1 initcall plantronics_driver_init+0x0/0x50 returned 0 after 155 usecs calling ps_init+0x0/0x50 @ 1 initcall ps_init+0x0/0x50 returned 0 after 156 usecs calling retrode_driver_init+0x0/0x50 @ 1 initcall retrode_driver_init+0x0/0x50 returned 0 after 177 usecs calling roccat_init+0x0/0x15e @ 1 initcall roccat_init+0x0/0x15e returned 0 after 18 usecs calling arvo_init+0x0/0xdd @ 1 initcall arvo_init+0x0/0xdd returned 0 after 200 usecs calling isku_init+0x0/0xdd @ 1 initcall isku_init+0x0/0xdd returned 0 after 191 usecs calling kone_init+0x0/0xdd @ 1 initcall kone_init+0x0/0xdd returned 0 after 188 usecs calling koneplus_init+0x0/0xdd @ 1 initcall koneplus_init+0x0/0xdd returned 0 after 284 usecs calling konepure_init+0x0/0xdc @ 1 initcall konepure_init+0x0/0xdc returned 0 after 180 usecs calling kovaplus_init+0x0/0xdd @ 1 initcall kovaplus_init+0x0/0xdd returned 0 after 201 usecs calling lua_driver_init+0x0/0x50 @ 1 initcall lua_driver_init+0x0/0x50 returned 0 after 150 usecs calling pyra_init+0x0/0xdc @ 1 initcall pyra_init+0x0/0xdc returned 0 after 180 usecs calling ryos_init+0x0/0xdd @ 1 initcall ryos_init+0x0/0xdd returned 0 after 244 usecs calling savu_init+0x0/0xdd @ 1 initcall savu_init+0x0/0xdd returned 0 after 182 usecs calling saitek_driver_init+0x0/0x50 @ 1 initcall saitek_driver_init+0x0/0x50 returned 0 after 156 usecs calling samsung_driver_init+0x0/0x50 @ 1 initcall samsung_driver_init+0x0/0x50 returned 0 after 153 usecs calling semitek_driver_init+0x0/0x50 @ 1 initcall semitek_driver_init+0x0/0x50 returned 0 after 163 usecs calling sony_init+0x0/0x9f @ 1 initcall sony_init+0x0/0x9f returned 0 after 203 usecs calling sp_driver_init+0x0/0x50 @ 1 initcall sp_driver_init+0x0/0x50 returned 0 after 164 usecs calling ga_driver_init+0x0/0x50 @ 1 initcall ga_driver_init+0x0/0x50 returned 0 after 163 usecs calling tm_driver_init+0x0/0x50 @ 1 initcall tm_driver_init+0x0/0x50 returned 0 after 169 usecs calling thrustmaster_driver_init+0x0/0x50 @ 1 initcall thrustmaster_driver_init+0x0/0x50 returned 0 after 152 usecs calling tivo_driver_init+0x0/0x50 @ 1 initcall tivo_driver_init+0x0/0x50 returned 0 after 240 usecs calling ts_driver_init+0x0/0x50 @ 1 initcall ts_driver_init+0x0/0x50 returned 0 after 182 usecs calling topre_driver_init+0x0/0x50 @ 1 initcall topre_driver_init+0x0/0x50 returned 0 after 197 usecs calling u2fzero_driver_init+0x0/0x50 @ 1 initcall u2fzero_driver_init+0x0/0x50 returned 0 after 153 usecs calling uclogic_driver_init+0x0/0x50 @ 1 initcall uclogic_driver_init+0x0/0x50 returned 0 after 131 usecs calling xiaomi_driver_init+0x0/0x50 @ 1 initcall xiaomi_driver_init+0x0/0x50 returned 0 after 105 usecs calling xinmo_driver_init+0x0/0x50 @ 1 initcall xinmo_driver_init+0x0/0x50 returned 0 after 166 usecs calling zp_driver_init+0x0/0x50 @ 1 initcall zp_driver_init+0x0/0x50 returned 0 after 183 usecs calling zc_driver_init+0x0/0x50 @ 1 initcall zc_driver_init+0x0/0x50 returned 0 after 178 usecs calling viewsonic_driver_init+0x0/0x50 @ 1 initcall viewsonic_driver_init+0x0/0x50 returned 0 after 160 usecs calling vrc2_driver_init+0x0/0x50 @ 1 initcall vrc2_driver_init+0x0/0x50 returned 0 after 124 usecs calling waltop_driver_init+0x0/0x50 @ 1 initcall waltop_driver_init+0x0/0x50 returned 0 after 106 usecs calling wiimote_hid_driver_init+0x0/0x50 @ 1 initcall wiimote_hid_driver_init+0x0/0x50 returned 0 after 177 usecs calling sensor_hub_driver_init+0x0/0x50 @ 1 initcall sensor_hub_driver_init+0x0/0x50 returned 0 after 193 usecs calling hid_sensor_custom_platform_driver_init+0x0/0x4b @ 1 initcall hid_sensor_custom_platform_driver_init+0x0/0x4b returned 0 after 113 usecs calling hid_init+0x0/0xf0 @ 1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver initcall hid_init+0x0/0xf0 returned 0 after 1515 usecs calling elan_i2c_hid_ts_driver_init+0x0/0x4b @ 1 initcall elan_i2c_hid_ts_driver_init+0x0/0x4b returned 0 after 107 usecs calling goodix_i2c_hid_ts_driver_init+0x0/0x4b @ 1 initcall goodix_i2c_hid_ts_driver_init+0x0/0x4b returned 0 after 124 usecs calling bcma_modinit+0x0/0xb8 @ 1 initcall bcma_modinit+0x0/0xb8 returned 0 after 155 usecs calling gb_init+0x0/0x1b3 @ 1 initcall gb_init+0x0/0x1b3 returned 0 after 135 usecs calling es2_ap_driver_init+0x0/0x50 @ 1 usbcore: registered new interface driver es2_ap_driver initcall es2_ap_driver_init+0x0/0x50 returned 0 after 979 usecs calling comedi_pci_init+0x0/0x2e @ 1 initcall comedi_pci_init+0x0/0x2e returned 0 after 1 usecs calling comedi_pcmcia_init+0x0/0x2e @ 1 initcall comedi_pcmcia_init+0x0/0x2e returned 0 after 1 usecs calling comedi_usb_init+0x0/0x2e @ 1 initcall comedi_usb_init+0x0/0x2e returned 0 after 1 usecs calling comedi_init+0x0/0x388 @ 1 comedi: version 0.7.76 - http://www.comedi.org initcall comedi_init+0x0/0x388 returned 0 after 887 usecs calling kcomedilib_module_init+0x0/0x2e @ 1 initcall kcomedilib_module_init+0x0/0x2e returned 0 after 1 usecs calling comedi_8254_module_init+0x0/0x2e @ 1 initcall comedi_8254_module_init+0x0/0x2e returned 0 after 1 usecs calling comedi_isadma_init+0x0/0x2e @ 1 initcall comedi_isadma_init+0x0/0x2e returned 0 after 1 usecs calling bonding_driver_init+0x0/0x49 @ 1 initcall bonding_driver_init+0x0/0x49 returned 0 after 44 usecs calling parport_driver_init+0x0/0x49 @ 1 initcall parport_driver_init+0x0/0x49 returned 0 after 5 usecs calling amplc_dio200_driver_init+0x0/0x49 @ 1 initcall amplc_dio200_driver_init+0x0/0x49 returned 0 after 4 usecs calling amplc_pc236_driver_init+0x0/0x49 @ 1 initcall amplc_pc236_driver_init+0x0/0x49 returned 0 after 4 usecs calling amplc_pc263_driver_init+0x0/0x49 @ 1 initcall amplc_pc263_driver_init+0x0/0x49 returned 0 after 3 usecs calling pcl711_driver_init+0x0/0x49 @ 1 initcall pcl711_driver_init+0x0/0x49 returned 0 after 3 usecs calling pcl724_driver_init+0x0/0x49 @ 1 initcall pcl724_driver_init+0x0/0x49 returned 0 after 3 usecs calling pcl726_driver_init+0x0/0x49 @ 1 initcall pcl726_driver_init+0x0/0x49 returned 0 after 3 usecs calling pcl730_driver_init+0x0/0x49 @ 1 initcall pcl730_driver_init+0x0/0x49 returned 0 after 4 usecs calling pcl812_driver_init+0x0/0x49 @ 1 initcall pcl812_driver_init+0x0/0x49 returned 0 after 3 usecs calling pcl818_driver_init+0x0/0x49 @ 1 initcall pcl818_driver_init+0x0/0x49 returned 0 after 3 usecs calling pcm3724_driver_init+0x0/0x49 @ 1 initcall pcm3724_driver_init+0x0/0x49 returned 0 after 4 usecs calling rti802_driver_init+0x0/0x49 @ 1 initcall rti802_driver_init+0x0/0x49 returned 0 after 3 usecs calling dac02_driver_init+0x0/0x49 @ 1 initcall dac02_driver_init+0x0/0x49 returned 0 after 65 usecs calling das16m1_driver_init+0x0/0x49 @ 1 initcall das16m1_driver_init+0x0/0x49 returned 0 after 4 usecs calling das08_isa_driver_init+0x0/0x49 @ 1 initcall das08_isa_driver_init+0x0/0x49 returned 0 after 2 usecs calling das16_driver_init+0x0/0x49 @ 1 initcall das16_driver_init+0x0/0x49 returned 0 after 3 usecs calling das1800_driver_init+0x0/0x49 @ 1 initcall das1800_driver_init+0x0/0x49 returned 0 after 4 usecs calling das6402_driver_init+0x0/0x49 @ 1 initcall das6402_driver_init+0x0/0x49 returned 0 after 3 usecs calling dt2801_driver_init+0x0/0x49 @ 1 initcall dt2801_driver_init+0x0/0x49 returned 0 after 3 usecs calling dt2814_driver_init+0x0/0x49 @ 1 initcall dt2814_driver_init+0x0/0x49 returned 0 after 3 usecs calling dt282x_driver_init+0x0/0x49 @ 1 initcall dt282x_driver_init+0x0/0x49 returned 0 after 3 usecs calling fl512_driver_init+0x0/0x49 @ 1 initcall fl512_driver_init+0x0/0x49 returned 0 after 3 usecs calling aio_iiro_16_driver_init+0x0/0x49 @ 1 initcall aio_iiro_16_driver_init+0x0/0x49 returned 0 after 3 usecs calling ni_at_ao_driver_init+0x0/0x49 @ 1 initcall ni_at_ao_driver_init+0x0/0x49 returned 0 after 3 usecs calling ni_atmio_driver_init+0x0/0x49 @ 1 initcall ni_atmio_driver_init+0x0/0x49 returned 0 after 3 usecs calling labpc_driver_init+0x0/0x49 @ 1 initcall labpc_driver_init+0x0/0x49 returned 0 after 15 usecs calling pcmad_driver_init+0x0/0x49 @ 1 initcall pcmad_driver_init+0x0/0x49 returned 0 after 4 usecs calling pcmda12_driver_init+0x0/0x49 @ 1 initcall pcmda12_driver_init+0x0/0x49 returned 0 after 3 usecs calling pcmmio_driver_init+0x0/0x49 @ 1 initcall pcmmio_driver_init+0x0/0x49 returned 0 after 3 usecs calling pcmuio_driver_init+0x0/0x49 @ 1 initcall pcmuio_driver_init+0x0/0x49 returned 0 after 4 usecs calling multiq3_driver_init+0x0/0x49 @ 1 initcall multiq3_driver_init+0x0/0x49 returned 0 after 3 usecs calling s526_driver_init+0x0/0x49 @ 1 initcall s526_driver_init+0x0/0x49 returned 0 after 4 usecs calling addi_watchdog_module_init+0x0/0x2e @ 1 initcall addi_watchdog_module_init+0x0/0x2e returned 0 after 1 usecs calling apci1500_driver_init+0x0/0x4e @ 1 initcall apci1500_driver_init+0x0/0x4e returned 0 after 159 usecs calling apci1516_driver_init+0x0/0x4e @ 1 initcall apci1516_driver_init+0x0/0x4e returned 0 after 70 usecs calling apci1564_driver_init+0x0/0x4e @ 1 initcall apci1564_driver_init+0x0/0x4e returned 0 after 64 usecs calling apci2200_driver_init+0x0/0x4e @ 1 initcall apci2200_driver_init+0x0/0x4e returned 0 after 129 usecs calling apci3120_driver_init+0x0/0x4e @ 1 initcall apci3120_driver_init+0x0/0x4e returned 0 after 115 usecs calling apci3xxx_driver_init+0x0/0x4e @ 1 initcall apci3xxx_driver_init+0x0/0x4e returned 0 after 95 usecs calling adl_pci6208_driver_init+0x0/0x4e @ 1 initcall adl_pci6208_driver_init+0x0/0x4e returned 0 after 114 usecs calling adl_pci8164_driver_init+0x0/0x4e @ 1 initcall adl_pci8164_driver_init+0x0/0x4e returned 0 after 136 usecs calling adl_pci9111_driver_init+0x0/0x4e @ 1 initcall adl_pci9111_driver_init+0x0/0x4e returned 0 after 114 usecs calling adl_pci9118_driver_init+0x0/0x4e @ 1 initcall adl_pci9118_driver_init+0x0/0x4e returned 0 after 139 usecs calling adv_pci1710_driver_init+0x0/0x4e @ 1 initcall adv_pci1710_driver_init+0x0/0x4e returned 0 after 122 usecs calling adv_pci1723_driver_init+0x0/0x4e @ 1 initcall adv_pci1723_driver_init+0x0/0x4e returned 0 after 112 usecs calling adv_pci1724_driver_init+0x0/0x4e @ 1 initcall adv_pci1724_driver_init+0x0/0x4e returned 0 after 111 usecs calling pci1760_driver_init+0x0/0x4e @ 1 initcall pci1760_driver_init+0x0/0x4e returned 0 after 136 usecs calling adv_pci_dio_driver_init+0x0/0x4e @ 1 initcall adv_pci_dio_driver_init+0x0/0x4e returned 0 after 120 usecs calling dio200_pci_comedi_driver_init+0x0/0x4e @ 1 initcall dio200_pci_comedi_driver_init+0x0/0x4e returned 0 after 114 usecs calling amplc_pci236_driver_init+0x0/0x4e @ 1 initcall amplc_pci236_driver_init+0x0/0x4e returned 0 after 152 usecs calling amplc_pci263_driver_init+0x0/0x4e @ 1 initcall amplc_pci263_driver_init+0x0/0x4e returned 0 after 113 usecs calling amplc_pci224_driver_init+0x0/0x4e @ 1 initcall amplc_pci224_driver_init+0x0/0x4e returned 0 after 112 usecs calling contec_pci_dio_driver_init+0x0/0x4e @ 1 initcall contec_pci_dio_driver_init+0x0/0x4e returned 0 after 111 usecs calling das08_pci_comedi_driver_init+0x0/0x4e @ 1 initcall das08_pci_comedi_driver_init+0x0/0x4e returned 0 after 141 usecs calling dyna_pci10xx_driver_init+0x0/0x4e @ 1 initcall dyna_pci10xx_driver_init+0x0/0x4e returned 0 after 123 usecs calling gsc_hpdi_driver_init+0x0/0x4e @ 1 initcall gsc_hpdi_driver_init+0x0/0x4e returned 0 after 127 usecs calling icp_multi_driver_init+0x0/0x4e @ 1 initcall icp_multi_driver_init+0x0/0x4e returned 0 after 118 usecs calling db2k_driver_init+0x0/0x4e @ 1 initcall db2k_driver_init+0x0/0x4e returned 0 after 118 usecs calling ke_counter_driver_init+0x0/0x4e @ 1 initcall ke_counter_driver_init+0x0/0x4e returned 0 after 117 usecs calling cb_pcidas64_driver_init+0x0/0x4e @ 1 initcall cb_pcidas64_driver_init+0x0/0x4e returned 0 after 144 usecs calling cb_pcidas_driver_init+0x0/0x4e @ 1 initcall cb_pcidas_driver_init+0x0/0x4e returned 0 after 110 usecs calling cb_pcimdda_driver_init+0x0/0x4e @ 1 initcall cb_pcimdda_driver_init+0x0/0x4e returned 0 after 124 usecs calling me4000_driver_init+0x0/0x4e @ 1 initcall me4000_driver_init+0x0/0x4e returned 0 after 142 usecs calling me_daq_driver_init+0x0/0x4e @ 1 initcall me_daq_driver_init+0x0/0x4e returned 0 after 109 usecs calling ni6527_driver_init+0x0/0x4e @ 1 initcall ni6527_driver_init+0x0/0x4e returned 0 after 125 usecs calling ni_660x_driver_init+0x0/0x4e @ 1 initcall ni_660x_driver_init+0x0/0x4e returned 0 after 111 usecs calling ni_670x_driver_init+0x0/0x4e @ 1 initcall ni_670x_driver_init+0x0/0x4e returned 0 after 123 usecs calling ni_pcidio_driver_init+0x0/0x4e @ 1 initcall ni_pcidio_driver_init+0x0/0x4e returned 0 after 111 usecs calling ni_pcimio_driver_init+0x0/0x4e @ 1 initcall ni_pcimio_driver_init+0x0/0x4e returned 0 after 140 usecs calling rtd520_driver_init+0x0/0x4e @ 1 initcall rtd520_driver_init+0x0/0x4e returned 0 after 103 usecs calling s626_driver_init+0x0/0x4e @ 1 initcall s626_driver_init+0x0/0x4e returned 0 after 111 usecs calling dnp_driver_init+0x0/0x49 @ 1 initcall dnp_driver_init+0x0/0x49 returned 0 after 3 usecs calling driver_das16cs_init+0x0/0x4e @ 1 initcall driver_das16cs_init+0x0/0x4e returned 0 after 89 usecs calling driver_das08_cs_init+0x0/0x4e @ 1 initcall driver_das08_cs_init+0x0/0x4e returned 0 after 95 usecs calling daq700_driver_init+0x0/0x4e @ 1 initcall daq700_driver_init+0x0/0x4e returned 0 after 85 usecs calling driver_dio24_init+0x0/0x4e @ 1 initcall driver_dio24_init+0x0/0x4e returned 0 after 75 usecs calling driver_labpc_cs_init+0x0/0x4e @ 1 initcall driver_labpc_cs_init+0x0/0x4e returned 0 after 97 usecs calling driver_ni_mio_cs_init+0x0/0x4e @ 1 initcall driver_ni_mio_cs_init+0x0/0x4e returned 0 after 82 usecs calling driver_daqp_init+0x0/0x4e @ 1 initcall driver_daqp_init+0x0/0x4e returned 0 after 76 usecs calling dt9812_driver_init+0x0/0x4e @ 1 usbcore: registered new interface driver dt9812 initcall dt9812_driver_init+0x0/0x4e returned 0 after 893 usecs calling ni6501_driver_init+0x0/0x4e @ 1 usbcore: registered new interface driver ni6501 initcall ni6501_driver_init+0x0/0x4e returned 0 after 923 usecs calling usbdux_driver_init+0x0/0x4e @ 1 usbcore: registered new interface driver usbdux initcall usbdux_driver_init+0x0/0x4e returned 0 after 888 usecs calling vmk80xx_driver_init+0x0/0x4e @ 1 usbcore: registered new interface driver vmk80xx initcall vmk80xx_driver_init+0x0/0x4e returned 0 after 930 usecs calling mite_module_init+0x0/0x2e @ 1 initcall mite_module_init+0x0/0x2e returned 0 after 1 usecs calling ni_tio_init_module+0x0/0x2e @ 1 initcall ni_tio_init_module+0x0/0x2e returned 0 after 1 usecs calling ni_tiocmd_init_module+0x0/0x2e @ 1 initcall ni_tiocmd_init_module+0x0/0x2e returned 0 after 1 usecs calling ni_routes_module_init+0x0/0x8d @ 1 initcall ni_routes_module_init+0x0/0x8d returned 0 after 2722 usecs calling labpc_common_init+0x0/0x2e @ 1 initcall labpc_common_init+0x0/0x2e returned 0 after 1 usecs calling ni_labpc_isadma_init_module+0x0/0x2e @ 1 initcall ni_labpc_isadma_init_module+0x0/0x2e returned 0 after 1 usecs calling comedi_8255_module_init+0x0/0x2e @ 1 initcall comedi_8255_module_init+0x0/0x2e returned 0 after 1 usecs calling dev_8255_driver_init+0x0/0x49 @ 1 initcall dev_8255_driver_init+0x0/0x49 returned 0 after 6 usecs calling amplc_dio200_common_init+0x0/0x2e @ 1 initcall amplc_dio200_common_init+0x0/0x2e returned 0 after 1 usecs calling amplc_pc236_common_init+0x0/0x2e @ 1 initcall amplc_pc236_common_init+0x0/0x2e returned 0 after 1 usecs calling das08_init+0x0/0x2e @ 1 initcall das08_init+0x0/0x2e returned 0 after 1 usecs calling tink_board_init+0x0/0x31 @ 1 initcall tink_board_init+0x0/0x31 returned -19 after 1 usecs calling dcdrbu_init+0x0/0x1b2 @ 1 initcall dcdrbu_init+0x0/0x1b2 returned 0 after 650 usecs calling dell_smbios_init+0x0/0x4f @ 1 dell_smbios: Unable to run on non-Dell system initcall dell_smbios_init+0x0/0x4f returned -19 after 788 usecs calling ibm_rtl_init+0x0/0x625 @ 1 initcall ibm_rtl_init+0x0/0x625 returned -19 after 1 usecs calling hdaps_init+0x0/0x69 @ 1 hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! initcall hdaps_init+0x0/0x69 returned -19 after 1317 usecs calling atomisp2_led_init+0x0/0x31 @ 1 initcall atomisp2_led_init+0x0/0x31 returned -19 after 1 usecs calling pmt_class_init+0x0/0x4e @ 1 initcall pmt_class_init+0x0/0x4e returned 0 after 234 usecs calling pmt_crashlog_init+0x0/0x50 @ 1 initcall pmt_crashlog_init+0x0/0x50 returned 0 after 117 usecs calling intel_vsec_pci_driver_init+0x0/0x50 @ 1 initcall intel_vsec_pci_driver_init+0x0/0x50 returned 0 after 126 usecs calling p50_module_init+0x0/0x31 @ 1 initcall p50_module_init+0x0/0x31 returned -19 after 1 usecs calling samsung_init+0x0/0x4fd @ 1 initcall samsung_init+0x0/0x4fd returned -19 after 1 usecs calling intel_scu_pci_driver_init+0x0/0x50 @ 1 initcall intel_scu_pci_driver_init+0x0/0x50 returned 0 after 146 usecs calling ipc_module_init+0x0/0x65 @ 1 initcall ipc_module_init+0x0/0x65 returned 0 after 22 usecs calling simatic_ipc_init_module+0x0/0x2e @ 1 initcall simatic_ipc_init_module+0x0/0x2e returned 0 after 1 usecs calling goldfish_pipe_driver_init+0x0/0x4b @ 1 initcall goldfish_pipe_driver_init+0x0/0x4b returned 0 after 146 usecs calling platform_mhu_driver_init+0x0/0x4b @ 1 initcall platform_mhu_driver_init+0x0/0x4b returned 0 after 101 usecs calling altera_mbox_driver_init+0x0/0x4b @ 1 initcall altera_mbox_driver_init+0x0/0x4b returned 0 after 129 usecs calling rproc_virtio_driver_init+0x0/0x4b @ 1 initcall rproc_virtio_driver_init+0x0/0x4b returned 0 after 112 usecs calling qcom_glink_ssr_driver_init+0x0/0x4b @ 1 initcall qcom_glink_ssr_driver_init+0x0/0x4b returned 0 after 89 usecs calling vmgenid_driver_init+0x0/0x49 @ 1 initcall vmgenid_driver_init+0x0/0x49 returned 0 after 158 usecs calling extcon_class_init+0x0/0x44 @ 1 initcall extcon_class_init+0x0/0x44 returned 0 after 44 usecs calling gpio_extcon_driver_init+0x0/0x4b @ 1 initcall gpio_extcon_driver_init+0x0/0x4b returned 0 after 114 usecs calling max77693_muic_driver_init+0x0/0x4b @ 1 initcall max77693_muic_driver_init+0x0/0x4b returned 0 after 106 usecs calling palmas_usb_driver_init+0x0/0x4b @ 1 initcall palmas_usb_driver_init+0x0/0x4b returned 0 after 93 usecs calling ptn5150_i2c_driver_init+0x0/0x4b @ 1 initcall ptn5150_i2c_driver_init+0x0/0x4b returned 0 after 100 usecs calling usb_extcon_driver_init+0x0/0x4b @ 1 initcall usb_extcon_driver_init+0x0/0x4b returned 0 after 127 usecs calling dfl_emif_driver_init+0x0/0x4b @ 1 Driver 'dfl-emif' was unable to register with bus_type 'dfl' because the bus was not initialized. initcall dfl_emif_driver_init+0x0/0x4b returned -22 after 1279 usecs calling ipack_init+0x0/0x9f @ 1 initcall ipack_init+0x0/0x9f returned 0 after 105 usecs calling ipoctal_init+0x0/0x50 @ 1 initcall ipoctal_init+0x0/0x50 returned 0 after 71 usecs calling tpci200_pci_drv_init+0x0/0x50 @ 1 initcall tpci200_pci_drv_init+0x0/0x50 returned 0 after 172 usecs calling ntb_driver_init+0x0/0x49 @ 1 initcall ntb_driver_init+0x0/0x49 returned 0 after 86 usecs calling idt_pci_driver_init+0x0/0xc9 @ 1 IDT PCI-E Non-Transparent Bridge Driver 2.0 initcall idt_pci_driver_init+0x0/0xc9 returned 0 after 911 usecs calling switchtec_ntb_init+0x0/0x53 @ 1 initcall switchtec_ntb_init+0x0/0x53 returned 0 after 71 usecs calling pp_init+0x0/0xe5 @ 1 initcall pp_init+0x0/0xe5 returned 0 after 80 usecs calling tool_init+0x0/0xe5 @ 1 initcall tool_init+0x0/0xe5 returned 0 after 70 usecs calling intel_rapl_msr_driver_init+0x0/0x4b @ 1 initcall intel_rapl_msr_driver_init+0x0/0x4b returned 0 after 750 usecs calling mcb_lpc_init+0x0/0x31 @ 1 initcall mcb_lpc_init+0x0/0x31 returned -19 after 1 usecs calling rmem_driver_init+0x0/0x4b @ 1 initcall rmem_driver_init+0x0/0x4b returned 0 after 127 usecs calling u_boot_env_driver_init+0x0/0x4b @ 1 initcall u_boot_env_driver_init+0x0/0x4b returned 0 after 150 usecs calling altera_ps_driver_init+0x0/0x4b @ 1 initcall altera_ps_driver_init+0x0/0x4b returned 0 after 112 usecs calling ice40_fpga_driver_init+0x0/0x4b @ 1 initcall ice40_fpga_driver_init+0x0/0x4b returned 0 after 75 usecs calling xilinx_slave_spi_driver_init+0x0/0x4b @ 1 SPI driver xlnx-slave-spi has no spi_device_id for xlnx,fpga-slave-serial initcall xilinx_slave_spi_driver_init+0x0/0x4b returned 0 after 1111 usecs calling mpf_driver_init+0x0/0x4b @ 1 initcall mpf_driver_init+0x0/0x4b returned 0 after 74 usecs calling alt_pr_platform_driver_init+0x0/0x4b @ 1 initcall alt_pr_platform_driver_init+0x0/0x4b returned 0 after 119 usecs calling altera_freeze_br_driver_init+0x0/0x4b @ 1 initcall altera_freeze_br_driver_init+0x0/0x4b returned 0 after 110 usecs calling xlnx_pr_decoupler_driver_init+0x0/0x4b @ 1 initcall xlnx_pr_decoupler_driver_init+0x0/0x4b returned 0 after 105 usecs calling dfl_fpga_init+0x0/0x258 @ 1 initcall dfl_fpga_init+0x0/0x258 returned 0 after 96 usecs calling afu_init+0x0/0xa3 @ 1 initcall afu_init+0x0/0xa3 returned 0 after 173 usecs calling cci_pci_driver_init+0x0/0x50 @ 1 initcall cci_pci_driver_init+0x0/0x50 returned 0 after 156 usecs calling fsi_master_gpio_driver_init+0x0/0x4b @ 1 initcall fsi_master_gpio_driver_init+0x0/0x4b returned 0 after 130 usecs calling sbefifo_init+0x0/0x30 @ 1 initcall sbefifo_init+0x0/0x30 returned 0 after 66 usecs calling adg792a_driver_init+0x0/0x4b @ 1 initcall adg792a_driver_init+0x0/0x4b returned 0 after 127 usecs calling adgs1408_driver_init+0x0/0x4b @ 1 initcall adgs1408_driver_init+0x0/0x4b returned 0 after 71 usecs calling mux_gpio_driver_init+0x0/0x4b @ 1 initcall mux_gpio_driver_init+0x0/0x4b returned 0 after 120 usecs calling mux_mmio_driver_init+0x0/0x4b @ 1 initcall mux_mmio_driver_init+0x0/0x4b returned 0 after 127 usecs calling quad8_driver_init+0x0/0xa1 @ 1 initcall quad8_driver_init+0x0/0xa1 returned -19 after 155 usecs calling interrupt_cnt_driver_init+0x0/0x4b @ 1 initcall interrupt_cnt_driver_init+0x0/0x4b returned 0 after 150 usecs calling mchp_tc_driver_init+0x0/0x4b @ 1 initcall mchp_tc_driver_init+0x0/0x4b returned 0 after 115 usecs calling intel_qep_driver_init+0x0/0x50 @ 1 initcall intel_qep_driver_init+0x0/0x50 returned 0 after 156 usecs calling sock_diag_init+0x0/0x9e @ 1 initcall sock_diag_init+0x0/0x9e returned 0 after 89 usecs calling gre_offload_init+0x0/0xcc @ 1 initcall gre_offload_init+0x0/0xcc returned 0 after 2 usecs calling sysctl_ipv4_init+0x0/0xce @ 1 initcall sysctl_ipv4_init+0x0/0xce returned 0 after 167 usecs calling tunnel4_init+0x0/0xf3 @ 1 initcall tunnel4_init+0x0/0xf3 returned 0 after 1 usecs calling inet_diag_init+0x0/0x13f @ 1 initcall inet_diag_init+0x0/0x13f returned 0 after 85 usecs calling tcp_diag_init+0x0/0x49 @ 1 initcall tcp_diag_init+0x0/0x49 returned 0 after 49 usecs calling cubictcp_register+0x0/0xc5 @ 1 initcall cubictcp_register+0x0/0xc5 returned 0 after 4 usecs calling inet6_init+0x0/0xb56 @ 1 NET: Registered PF_INET6 protocol family Segment Routing with IPv6 In-situ OAM (IOAM) with IPv6 initcall inet6_init+0x0/0xb56 returned 0 after 4334 usecs calling sit_init+0x0/0x1dd @ 1 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver initcall sit_init+0x0/0x1dd returned 0 after 2404 usecs calling packet_init+0x0/0x172 @ 1 NET: Registered PF_PACKET protocol family initcall packet_init+0x0/0x172 returned 0 after 757 usecs calling init_p9+0x0/0x9b @ 1 9pnet: Installing 9P2000 support initcall init_p9+0x0/0x9b returned 0 after 806 usecs calling p9_trans_fd_init+0x0/0x7a @ 1 initcall p9_trans_fd_init+0x0/0x7a returned 0 after 37 usecs calling p9_virtio_init+0x0/0xb5 @ 1 initcall p9_virtio_init+0x0/0xb5 returned 0 after 96 usecs calling plist_test+0x0/0x39c @ 1 start plist test end plist test initcall plist_test+0x0/0x39c returned 0 after 7116 usecs calling mcheck_init_device+0x0/0x28d @ 1 initcall mcheck_init_device+0x0/0x28d returned 0 after 1014 usecs calling kernel_do_mounts_initrd_sysctls_init+0x0/0x54 @ 1 initcall kernel_do_mounts_initrd_sysctls_init+0x0/0x54 returned 0 after 20 usecs calling mcheck_late_init+0x0/0x9c @ 1 initcall mcheck_late_init+0x0/0x9c returned 0 after 3 usecs calling severities_debugfs_init+0x0/0x6d @ 1 initcall severities_debugfs_init+0x0/0x6d returned 0 after 2 usecs calling microcode_init+0x0/0x3c3 @ 1 initcall microcode_init+0x0/0x3c3 returned -22 after 1 usecs calling hpet_insert_resource+0x0/0x77 @ 1 initcall hpet_insert_resource+0x0/0x77 returned 0 after 6 usecs calling start_sync_check_timer+0x0/0xdf @ 1 initcall start_sync_check_timer+0x0/0xdf returned 0 after 1 usecs calling update_mp_table+0x0/0x5ee @ 1 initcall update_mp_table+0x0/0x5ee returned 0 after 1 usecs calling lapic_insert_resource+0x0/0x8a @ 1 initcall lapic_insert_resource+0x0/0x8a returned 0 after 5 usecs calling print_ipi_mode+0x0/0x7f @ 1 IPI shorthand broadcast: enabled initcall print_ipi_mode+0x0/0x7f returned 0 after 628 usecs calling print_ICs+0x0/0x11c @ 1 ... APIC ID: 00000000 (0) ... APIC VERSION: 00050014 0000000000000000000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000001000 number of MP IRQ sources: 15. number of IO-APIC #0 registers: 24. testing the IO APIC....................... IO APIC #0...... .... register #00: 00000000 ....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 17 ....... : PRQ implemented: 0 ....... : IO APIC version: 11 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: IOAPIC 0: pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin01, enabled , edge , high, V(22), IRR(0), S(0), logical , D(0001), M(0) pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(0001), M(0) pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin07, enabled , edge , high, V(21), IRR(0), S(0), logical , D(0001), M(0) pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin09, enabled , level, high, V(21), IRR(0), S(0), logical , D(0002), M(0) pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0c, enabled , edge , high, V(22), IRR(0), S(0), logical , D(0002), M(0) pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. initcall print_ICs+0x0/0x11c returned 0 after 48798 usecs calling setup_efi_kvm_sev_migration+0x0/0x2e @ 1 initcall setup_efi_kvm_sev_migration+0x0/0x2e returned 0 after 1 usecs calling create_tlb_single_page_flush_ceiling+0x0/0x5e @ 1 initcall create_tlb_single_page_flush_ceiling+0x0/0x5e returned 0 after 2 usecs calling aesni_init+0x0/0x170 @ 1 initcall aesni_init+0x0/0x170 returned 0 after 1193 usecs calling kernel_panic_sysctls_init+0x0/0x54 @ 1 initcall kernel_panic_sysctls_init+0x0/0x54 returned 0 after 20 usecs calling reboot_ksysfs_init+0x0/0x10b @ 1 initcall reboot_ksysfs_init+0x0/0x10b returned 0 after 79 usecs calling sched_core_sysctl_init+0x0/0x54 @ 1 initcall sched_core_sysctl_init+0x0/0x54 returned 0 after 14 usecs calling sched_fair_sysctl_init+0x0/0x54 @ 1 initcall sched_fair_sysctl_init+0x0/0x54 returned 0 after 15 usecs calling sched_rt_sysctl_init+0x0/0x54 @ 1 initcall sched_rt_sysctl_init+0x0/0x54 returned 0 after 18 usecs calling sched_dl_sysctl_init+0x0/0x54 @ 1 initcall sched_dl_sysctl_init+0x0/0x54 returned 0 after 16 usecs calling sched_clock_init_late+0x0/0x99 @ 1 sched_clock: Marking stable (19407421062, 43970306)->(19808796044, -357404676) initcall sched_clock_init_late+0x0/0x99 returned 0 after 1122 usecs calling sched_init_debug+0x0/0x27d @ 1 initcall sched_init_debug+0x0/0x27d returned 0 after 10 usecs calling kernel_lockdep_sysctls_init+0x0/0x54 @ 1 initcall kernel_lockdep_sysctls_init+0x0/0x54 returned 0 after 22 usecs calling cpu_latency_qos_init+0x0/0x99 @ 1 initcall cpu_latency_qos_init+0x0/0x99 returned 0 after 426 usecs calling printk_late_init+0x0/0x384 @ 1 initcall printk_late_init+0x0/0x384 returned 0 after 35 usecs calling rcu_verify_early_boot_tests+0x0/0xe0 @ 1 initcall rcu_verify_early_boot_tests+0x0/0xe0 returned 0 after 1 usecs calling rcu_tasks_verify_schedule_work+0x0/0xd0 @ 1 initcall rcu_tasks_verify_schedule_work+0x0/0xd0 returned 0 after 2 usecs calling init_srcu_module_notifier+0x0/0x8d @ 1 initcall init_srcu_module_notifier+0x0/0x8d returned 0 after 6 usecs calling swiotlb_create_default_debugfs+0x0/0xec @ 1 initcall swiotlb_create_default_debugfs+0x0/0xec returned 0 after 2 usecs calling tk_debug_sleep_time_init+0x0/0x5a @ 1 initcall tk_debug_sleep_time_init+0x0/0x5a returned 0 after 2 usecs calling kexec_core_sysctl_init+0x0/0x54 @ 1 initcall kexec_core_sysctl_init+0x0/0x54 returned 0 after 20 usecs calling bpf_rstat_kfunc_init+0x0/0x2e @ 1 initcall bpf_rstat_kfunc_init+0x0/0x2e returned 0 after 1 usecs calling debugfs_kprobe_init+0x0/0xc5 @ 1 initcall debugfs_kprobe_init+0x0/0xc5 returned 0 after 2 usecs calling load_system_certificate_list+0x0/0x76 @ 1 Loading compiled-in X.509 certificates initcall load_system_certificate_list+0x0/0x76 returned 0 after 836 usecs calling load_revocation_certificate_list+0x0/0x98 @ 1 initcall load_revocation_certificate_list+0x0/0x98 returned 0 after 1 usecs calling init_lru_gen+0x0/0xd9 @ 1 initcall init_lru_gen+0x0/0xd9 returned 0 after 40 usecs calling fault_around_debugfs+0x0/0x5a @ 1 initcall fault_around_debugfs+0x0/0x5a returned 0 after 2 usecs calling max_swapfiles_check+0x0/0x2e @ 1 initcall max_swapfiles_check+0x0/0x2e returned 0 after 1 usecs calling pageowner_init+0x0/0xb5 @ 1 initcall pageowner_init+0x0/0xb5 returned 0 after 2 usecs calling check_early_ioremap_leak+0x0/0x115 @ 1 initcall check_early_ioremap_leak+0x0/0x115 returned 0 after 1 usecs calling cma_debugfs_init+0x0/0xc4 @ 1 initcall cma_debugfs_init+0x0/0xc4 returned 0 after 2 usecs calling set_hardened_usercopy+0x0/0x75 @ 1 initcall set_hardened_usercopy+0x0/0x75 returned 1 after 1 usecs calling shrinker_debugfs_init+0x0/0x148 @ 1 initcall shrinker_debugfs_init+0x0/0x148 returned -2 after 1 usecs calling fsverity_init+0x0/0x126 @ 1 fs-verity: Initialized fs-verity initcall fsverity_init+0x0/0x126 returned 0 after 14095 usecs calling ubifs_init+0x0/0x22c @ 1 initcall ubifs_init+0x0/0x22c returned 0 after 4166 usecs calling init_root_keyring+0x0/0x48 @ 1 initcall init_root_keyring+0x0/0x48 returned 0 after 362 usecs calling init_trusted+0x0/0x2e @ 1 initcall init_trusted+0x0/0x2e returned 0 after 1 usecs calling init_encrypted+0x0/0x1cc @ 1 Key type encrypted registered initcall init_encrypted+0x0/0x1cc returned 0 after 23829 usecs calling integrity_fs_init+0x0/0x3b @ 1 initcall integrity_fs_init+0x0/0x3b returned -19 after 1 usecs calling init_evm+0x0/0x199 @ 1 evm: Initialising EVM extended attributes: evm: security.selinux (disabled) evm: security.SMACK64 (disabled) evm: security.SMACK64EXEC (disabled) evm: security.SMACK64TRANSMUTE (disabled) evm: security.SMACK64MMAP (disabled) evm: security.apparmor (disabled) evm: security.ima (disabled) evm: security.capability evm: HMAC attrs: 0x1 evm: Error registering secfs initcall init_evm+0x0/0x199 returned -14 after 7030 usecs calling crypto_algapi_init+0x0/0x58 @ 1 initcall crypto_algapi_init+0x0/0x58 returned 0 after 48894 usecs calling blk_timeout_init+0x0/0x38 @ 1 initcall blk_timeout_init+0x0/0x38 returned 0 after 1 usecs calling init_error_injection+0x0/0x181 @ 1 initcall init_error_injection+0x0/0x181 returned 0 after 1139 usecs calling pci_resource_alignment_sysfs_init+0x0/0x4e @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x4e returned 0 after 23 usecs calling pci_sysfs_init+0x0/0x14d @ 1 initcall pci_sysfs_init+0x0/0x14d returned 0 after 187 usecs calling clk_debug_init+0x0/0x1df @ 1 initcall clk_debug_init+0x0/0x1df returned 0 after 64 usecs calling sync_state_resume_initcall+0x0/0x30 @ 1 initcall sync_state_resume_initcall+0x0/0x30 returned 0 after 5 usecs calling deferred_probe_initcall+0x0/0x110 @ 1 initcall deferred_probe_initcall+0x0/0x110 returned 0 after 4800 usecs calling wl1273_core_init+0x0/0x8f @ 1 initcall wl1273_core_init+0x0/0x8f returned 0 after 127 usecs calling block2mtd_init+0x0/0xd6 @ 1 initcall block2mtd_init+0x0/0xd6 returned 0 after 1 usecs calling ubi_init+0x0/0x4cc @ 1 UBI error: cannot create "ubi" debugfs directory, error -2 UBI error: cannot initialize UBI, error -2 initcall ubi_init+0x0/0x4cc returned -2 after 1828 usecs calling aqc_init+0x0/0x50 @ 1 initcall aqc_init+0x0/0x50 returned 0 after 121 usecs calling kraken2_init+0x0/0x50 @ 1 initcall kraken2_init+0x0/0x50 returned 0 after 112 usecs calling powernow_init+0x0/0x84 @ 1 initcall powernow_init+0x0/0x84 returned -19 after 1 usecs calling centrino_init+0x0/0x89 @ 1 initcall centrino_init+0x0/0x89 returned -19 after 1 usecs calling cpufreq_p4_init+0x0/0xf6 @ 1 initcall cpufreq_p4_init+0x0/0xf6 returned -19 after 1 usecs calling edd_init+0x0/0x2e0 @ 1 initcall edd_init+0x0/0x2e0 returned -19 after 1 usecs calling of_fdt_raw_init+0x0/0xd2 @ 1 initcall of_fdt_raw_init+0x0/0xd2 returned 0 after 1 usecs calling cec_init+0x0/0x247 @ 1 RAS: Correctable Errors collector initialized. initcall cec_init+0x0/0x247 returned 0 after 906 usecs calling tcp_congestion_default+0x0/0x4e @ 1 initcall tcp_congestion_default+0x0/0x4e returned 0 after 3 usecs calling ip_auto_config+0x0/0xa3a @ 1 e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending DHCP requests ., OK IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15 IP-Config: Complete: device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2 host=vm-meta-173, domain=, nis-domain=(none) bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath= nameserver0=10.0.2.3 initcall ip_auto_config+0x0/0xa3a returned 0 after 1019813 usecs calling pci_mmcfg_late_insert_resources+0x0/0xdb @ 1 initcall pci_mmcfg_late_insert_resources+0x0/0xdb returned 0 after 1 usecs calling trace_eval_sync+0x0/0x6d @ 1 initcall trace_eval_sync+0x0/0x6d returned 0 after 176 usecs calling late_trace_init+0x0/0x20d @ 1 initcall late_trace_init+0x0/0x20d returned 0 after 1 usecs calling acpi_gpio_handle_deferred_request_irqs+0x0/0xbc @ 1 initcall acpi_gpio_handle_deferred_request_irqs+0x0/0xbc returned 0 after 601 usecs calling clk_disable_unused+0x0/0x2e3 @ 1 initcall clk_disable_unused+0x0/0x2e3 returned 0 after 52 usecs calling regulator_init_complete+0x0/0xa7 @ 1 initcall regulator_init_complete+0x0/0xa7 returned 0 after 4 usecs calling of_platform_sync_state_init+0x0/0x45 @ 1 initcall of_platform_sync_state_init+0x0/0x45 returned 0 after 33 usecs Freeing unused kernel image (initmem) memory: 2904K Write protecting kernel text and read-only data: 55436k Run /init as init process with arguments: /init with environment: HOME=/ TERM=linux RESULT_ROOT=/result/rcutorture/300s-default-tasks-tracing/vm-snb/debian-11.1-i386-20220923.cgz/i386-randconfig-a012-20221226/gcc-11/0af8489b0216fa1dd83e264bef8063f2632633d7/19 BOOT_IMAGE=/pkg/linux/i386-randconfig-a012-20221226/gcc-11/0af8489b0216fa1dd83e264bef8063f2632633d7/vmlinuz-6.1.0-rc2-00014-g0af8489b0216 branch=linux-next/master job=/lkp/jobs/scheduled/vm-meta-173/rcutorture-300s-default-tasks-tracing-debian-11.1-i386-20220923.cgz-0af8489b0216fa1dd83e264bef8063f2632633d7-20221231-13940-1j3s4jz-4.yaml user=lkp ARCH=i386 kconfig=i386-randconfig-a012-20221226 commit=0af8489b0216fa1dd83e264bef8063f2632633d7 max_uptime=1200 LKP_SERVER=internal-lkp-server selinux=0 softlockup_panic=1 prompt_ramdisk=0 vga=normal systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time. systemd[1]: Failed to find module 'autofs4' Welcome to Debian GNU/Linux 11 (bullseye)! process 162 ((sd-executor)) attempted a POSIX timer syscall while CONFIG_POSIX_TIMERS is not set systemd-getty-g (167) used greatest stack depth: 5828 bytes left systemd-bless-b (163) used greatest stack depth: 5748 bytes left systemd-debug-g (165) used greatest stack depth: 5716 bytes left systemd-veritys (174) used greatest stack depth: 5696 bytes left random: crng init done Created slice system-getty.slice. Created slice system-modprobe.slice. Created slice User and Session Slice. Reached target Local Encrypted Volumes. Reached target Paths. Reached target Slices. Reached target Swap. Listening on RPCbind Server Activation Socket. Listening on Syslog Socket. Listening on initctl Compatibility Named Pipe. Listening on Journal Socket (/dev/log). Listening on Journal Socket. Listening on udev Control Socket. Listening on udev Kernel Socket. Mounting Huge Pages File System... Mounting RPC Pipe File System... Mounting Kernel Trace File System... Starting Load Kernel Module configfs... Starting Load Kernel Module drm... Starting Load Kernel Module fuse... Starting Journal Service... Starting Load Kernel Modules... Starting Remount Root and Kernel File Systems... Starting Coldplug All udev Devices... Mounted Huge Pages File System. Mounted RPC Pipe File System. Mounted Kernel Trace File System. Finished Load Kernel Module configfs. Finished Load Kernel Module drm. Finished Load Kernel Module fuse. Finished Remount Root and Kernel File Systems. Mounting Kernel Configuration File System... Starting Load/Save Random Seed... Starting Create System Users... Finished Load Kernel Modules. Mounted Kernel Configuration File System. Starting Apply Kernel Variables... Finished Load/Save Random Seed. Finished Create System Users. Starting Create Static Device Nodes in /dev... Finished Apply Kernel Variables. systemd-tmpfile (191) used greatest stack depth: 5504 bytes left Finished Create Static Device Nodes in /dev. Reached target Local File Systems (Pre). Reached target Local File Systems. Starting Preprocess NFS configuration... Finished Preprocess NFS configuration. Reached target NFS client services. Started Rule-based Manager for Device Events and Files. Started Journal Service. Starting Flush Journal to Persistent Storage... Finished Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... Finished Create Volatile Files and Directories. Starting RPC bind portmap service... Starting Update UTMP about System Boot/Shutdown... Started RPC bind portmap service. Reached target Remote File Systems (Pre). Reached target Remote File Systems. Reached target RPC Port Mapper. Failed to start Update UTMP about System Boot/Shutdown. See 'systemctl status systemd-update-utmp.service' for details. page:e660911a refcount:0 mapcount:0 mapping:00000000 index:0xedaeef00 pfn:0x2daee page:0946d53a refcount:0 mapcount:0 mapping:00000000 index:0x0 pfn:0x2daec flags: 0x0(zone=0) raw: 00000000 e764d494 e6f205b4 00000000 00000000 00020000 ffffffff 00000000 raw: 00000000 00000000 page dumped because: VM_BUG_ON_FOLIO(!folio_test_large(folio)) page_owner tracks the page as freed page last allocated via order 1, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 208, tgid 208 (systemd-udevd), ts 25780391126, free_ts 25780421356 post_alloc_hook+0x1fa/0x280 get_page_from_freelist+0x226/0x310 __alloc_pages+0xdd/0x360 alloc_slab_page+0x12d/0x200 allocate_slab+0x6a/0x350 new_slab+0x48/0xc0 __slab_alloc_node+0xfb/0x270 kmem_cache_alloc+0x8f/0x4e0 getname_flags+0x33/0x2f0 getname+0x1a/0x30 do_sys_openat2+0xa5/0x1f0 do_sys_open+0x8e/0xe0 __ia32_sys_openat+0x2b/0x40 __do_fast_syscall_32+0x72/0xd0 do_fast_syscall_32+0x32/0x70 do_SYSENTER_32+0x15/0x20 page last free stack trace: free_pcp_prepare+0x34f/0x940 free_unref_page_prepare+0x29/0x210 free_unref_page+0x3a/0x3b0 __free_pages+0x187/0x1f0 __free_slab+0x1fd/0x350 free_slab+0x22/0x70 free_to_partial_list+0x125/0x260 do_slab_free+0x30/0x70 kmem_cache_free+0x171/0x1e0 putname+0x9f/0xf0 do_sys_openat2+0xe2/0x1f0 do_sys_open+0x8e/0xe0 __ia32_sys_openat+0x2b/0x40 __do_fast_syscall_32+0x72/0xd0 do_fast_syscall_32+0x32/0x70 do_SYSENTER_32+0x15/0x20 ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:825! invalid opcode: 0000 [#1] SMP CPU: 0 PID: 214 Comm: udevadm Tainted: G S 6.1.0-rc2-00014-g0af8489b0216 #2 1c4d7707ec0ce574ed62a77e82a8580202758048 EIP: __dump_page.cold+0x282/0x369 Code: ff ff 83 05 e8 5d bb c5 01 ba 4c c4 2f c4 89 f8 83 15 ec 5d bb c5 00 e8 f2 92 ed fd 83 05 f8 5d bb c5 01 83 15 fc 5d bb c5 00 <0f> 0b 83 05 00 5e bb c5 01 b8 ac 85 a3 c4 83 15 04 5e bb c5 00 e8 EAX: 00000000 EBX: e764d530 ECX: 00000003 EDX: 4108888f ESI: e764d4e0 EDI: e764d4e0 EBP: ed89db3c ESP: ed89db00 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00210046 CR0: 80050033 CR2: 00616abc CR3: 2d878000 CR4: 000406d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: dump_page+0x2a/0xc0 ? _raw_spin_lock_irqsave+0x16/0x30 folio_flags+0x23/0x70 get_partial_node+0x89/0x290 __slab_alloc_node+0xbb/0x270 kmem_cache_alloc_lru+0x8d/0x4e0 ? __lock_release+0x3ec/0x410 ? iget_locked+0x78/0x310 alloc_inode+0x93/0x150 iget_locked+0xdd/0x310 ? lock_is_held_type+0x80/0xf0 kernfs_get_inode+0x24/0xb0 kernfs_iop_lookup+0xb5/0x1a0 __lookup_slow+0xd9/0x2a0 lookup_slow+0x50/0x90 walk_component+0x19c/0x2c0 path_lookupat+0xa3/0x270 path_openat+0x307/0x3e0 do_filp_open+0x7c/0x130 do_sys_openat2+0x113/0x1f0 do_sys_open+0x8e/0xe0 __ia32_sys_openat+0x2b/0x40 __do_fast_syscall_32+0x72/0xd0 ? trace_hardirqs_on+0xa2/0x110 ? __fput+0x19f/0x390 ? lockdep_hardirqs_on_prepare+0x242/0x400 ? syscall_exit_to_user_mode+0x5f/0x90 ? __do_fast_syscall_32+0x7c/0xd0 ? lockdep_hardirqs_on_prepare+0x242/0x400 ? syscall_exit_to_user_mode+0x5f/0x90 ? __do_fast_syscall_32+0x7c/0xd0 ? __do_fast_syscall_32+0x7c/0xd0 ? syscall_exit_to_user_mode+0x5f/0x90 ? __do_fast_syscall_32+0x7c/0xd0 ? __do_fast_syscall_32+0x7c/0xd0 ? __do_fast_syscall_32+0x7c/0xd0 ? irqentry_exit_to_user_mode+0x23/0x30 ? irqentry_exit+0x7f/0xc0 do_fast_syscall_32+0x32/0x70 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0xa2/0xfb EIP: 0xb7f8c549 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000006 ECX: 006142a1 EDX: 002a8000 ESI: 00000000 EDI: 00000001 EBP: 00614024 ESP: bff3c4a0 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00200246 Modules linked in: ---[ end trace 0000000000000000 ]--- EIP: __dump_page.cold+0x282/0x369 Code: ff ff 83 05 e8 5d bb c5 01 ba 4c c4 2f c4 89 f8 83 15 ec 5d bb c5 00 e8 f2 92 ed fd 83 05 f8 5d bb c5 01 83 15 fc 5d bb c5 00 <0f> 0b 83 05 00 5e bb c5 01 b8 ac 85 a3 c4 83 15 04 5e bb c5 00 e8 EAX: 00000000 EBX: e764d530 ECX: 00000003 EDX: 4108888f ESI: e764d4e0 EDI: e764d4e0 EBP: ed89db3c ESP: ed89db00 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00210046 CR0: 80050033 CR2: 00616abc CR3: 2d878000 CR4: 000406d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Kboot worker: lkp-worker32 Elapsed time: 60 kvm=( qemu-system-x86_64 -enable-kvm -cpu SandyBridge -kernel $kernel -initrd initrd-vm-meta-173.cgz -m 16384 -smp 2 -device e1000,netdev=net0 -netdev user,id=net0,hostfwd=tcp::32032-:22 -boot order=nc -no-reboot -device i6300esb -watchdog-action debug -rtc base=localtime -serial stdio -display none -monitor null ) append=( ip=::::vm-meta-173::dhcp root=/dev/ram0 RESULT_ROOT=/result/rcutorture/300s-default-tasks-tracing/vm-snb/debian-11.1-i386-20220923.cgz/i386-randconfig-a012-20221226/gcc-11/0af8489b0216fa1dd83e264bef8063f2632633d7/19 BOOT_IMAGE=/pkg/linux/i386-randconfig-a012-20221226/gcc-11/0af8489b0216fa1dd83e264bef8063f2632633d7/vmlinuz-6.1.0-rc2-00014-g0af8489b0216 branch=linux-next/master job=/job-script user=lkp ARCH=i386 kconfig=i386-randconfig-a012-20221226 commit=0af8489b0216fa1dd83e264bef8063f2632633d7 vmalloc=256M initramfs_async=0 page_owner=on initcall_debug mem=4G nmi_watchdog=0 max_uptime=1200 result_service=tmpfs selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw mem=4G rcuperf.shutdown=0 watchdog_thresh=240 ) "${kvm[@]}" -append "${append[*]}"