| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221231160402.16157-3-samuel@sholland.org>
Date: Sat, 31 Dec 2022 10:04:02 -0600
From: Samuel Holland <samuel@...lland.org>
To: Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>
Cc: Samuel Holland <samuel@...lland.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-sunxi@...ts.linux.dev
Subject: [PATCH 2/2] soc: sunxi: Add Allwinner D1 PPU driver
The PPU contains a series of identical MMIO register ranges, one for
each power domain. Each range contains control/status bits for a clock
gate, reset line, output gates, and a power switch. (The clock and reset
are separate from, and in addition to, the bits in the CCU.) It also
contains a hardware power sequence engine to control the other bits.
Signed-off-by: Samuel Holland <samuel@...lland.org>
---
drivers/soc/sunxi/Kconfig | 9 ++
drivers/soc/sunxi/Makefile | 1 +
drivers/soc/sunxi/sun20i-ppu.c | 207 +++++++++++++++++++++++++++++++++
3 files changed, 217 insertions(+)
create mode 100644 drivers/soc/sunxi/sun20i-ppu.c
diff --git a/drivers/soc/sunxi/Kconfig b/drivers/soc/sunxi/Kconfig
index 8aecbc9b1976..5e84cf4b8510 100644
--- a/drivers/soc/sunxi/Kconfig
+++ b/drivers/soc/sunxi/Kconfig
@@ -19,3 +19,12 @@ config SUNXI_SRAM
Say y here to enable the SRAM controller support. This
device is responsible on mapping the SRAM in the sunXi SoCs
whether to the CPU/DMA, or to the devices.
+
+config SUN20I_PPU
+ bool "Allwinner D1 PPU power domain driver"
+ depends on ARCH_SUNXI || COMPILE_TEST
+ select PM_GENERIC_DOMAINS
+ help
+ Say y to enable the PPU power domain driver. This saves power
+ when certain peripherals, such as the video engine, are idle.
+ All power domains are on by default, so this is optional.
diff --git a/drivers/soc/sunxi/Makefile b/drivers/soc/sunxi/Makefile
index 549159571d4f..90ff2ebe7655 100644
--- a/drivers/soc/sunxi/Makefile
+++ b/drivers/soc/sunxi/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_SUNXI_MBUS) += sunxi_mbus.o
obj-$(CONFIG_SUNXI_SRAM) += sunxi_sram.o
+obj-$(CONFIG_SUN20I_PPU) += sun20i-ppu.o
diff --git a/drivers/soc/sunxi/sun20i-ppu.c b/drivers/soc/sunxi/sun20i-ppu.c
new file mode 100644
index 000000000000..98cb41d36560
--- /dev/null
+++ b/drivers/soc/sunxi/sun20i-ppu.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/reset.h>
+
+#define PD_STATE_ON 1
+#define PD_STATE_OFF 2
+
+#define PD_RSTN_REG 0x00
+#define PD_CLK_GATE_REG 0x04
+#define PD_PWROFF_GATE_REG 0x08
+#define PD_PSW_ON_REG 0x0c
+#define PD_PSW_OFF_REG 0x10
+#define PD_PSW_DELAY_REG 0x14
+#define PD_OFF_DELAY_REG 0x18
+#define PD_ON_DELAY_REG 0x1c
+#define PD_COMMAND_REG 0x20
+#define PD_STATUS_REG 0x24
+#define PD_STATUS_COMPLETE BIT(1)
+#define PD_STATUS_BUSY BIT(3)
+#define PD_STATUS_STATE GENMASK(17, 16)
+#define PD_ACTIVE_CTRL_REG 0x2c
+#define PD_GATE_STATUS_REG 0x30
+#define PD_RSTN_STATUS BIT(0)
+#define PD_CLK_GATE_STATUS BIT(1)
+#define PD_PWROFF_GATE_STATUS BIT(2)
+#define PD_PSW_STATUS_REG 0x34
+
+#define PD_REGS_SIZE 0x80
+
+struct sun20i_ppu_desc {
+ const char *const *names;
+ unsigned int num_domains;
+};
+
+struct sun20i_ppu_pd {
+ struct generic_pm_domain genpd;
+ void __iomem *base;
+};
+
+#define to_sun20i_ppu_pd(_genpd) \
+ container_of(_genpd, struct sun20i_ppu_pd, genpd)
+
+static bool sun20i_ppu_pd_is_on(const struct sun20i_ppu_pd *pd)
+{
+ u32 status = readl(pd->base + PD_STATUS_REG);
+
+ return FIELD_GET(PD_STATUS_STATE, status) == PD_STATE_ON;
+}
+
+static int sun20i_ppu_pd_set_power(const struct sun20i_ppu_pd *pd, bool power_on)
+{
+ u32 state, status;
+ int ret;
+
+ if (sun20i_ppu_pd_is_on(pd) == power_on)
+ return 0;
+
+ /* Wait for the power controller to be idle. */
+ ret = readl_poll_timeout(pd->base + PD_STATUS_REG, status,
+ !(status & PD_STATUS_BUSY), 100, 1000);
+ if (ret)
+ return ret;
+
+ state = power_on ? PD_STATE_ON : PD_STATE_OFF;
+ writel(state, pd->base + PD_COMMAND_REG);
+
+ /* Wait for the state transition to complete. */
+ ret = readl_poll_timeout(pd->base + PD_STATUS_REG, status,
+ FIELD_GET(PD_STATUS_STATE, status) == state &&
+ (status & PD_STATUS_COMPLETE), 100, 1000);
+ if (ret)
+ return ret;
+
+ /* Clear the completion flag. */
+ writel(status, pd->base + PD_STATUS_REG);
+
+ return 0;
+}
+
+static int sun20i_ppu_pd_power_on(struct generic_pm_domain *genpd)
+{
+ const struct sun20i_ppu_pd *pd = to_sun20i_ppu_pd(genpd);
+
+ return sun20i_ppu_pd_set_power(pd, true);
+}
+
+static int sun20i_ppu_pd_power_off(struct generic_pm_domain *genpd)
+{
+ const struct sun20i_ppu_pd *pd = to_sun20i_ppu_pd(genpd);
+
+ return sun20i_ppu_pd_set_power(pd, false);
+}
+
+static int sun20i_ppu_probe(struct platform_device *pdev)
+{
+ const struct sun20i_ppu_desc *desc;
+ struct device *dev = &pdev->dev;
+ struct genpd_onecell_data *ppu;
+ struct sun20i_ppu_pd *pds;
+ struct reset_control *rst;
+ void __iomem *base;
+ struct clk *clk;
+ int ret;
+
+ desc = of_device_get_match_data(dev);
+ if (!desc)
+ return -EINVAL;
+
+ pds = devm_kcalloc(dev, desc->num_domains, sizeof(*pds), GFP_KERNEL);
+ if (!pds)
+ return -ENOMEM;
+
+ ppu = devm_kzalloc(dev, sizeof(*ppu), GFP_KERNEL);
+ if (!ppu)
+ return -ENOMEM;
+
+ ppu->domains = devm_kcalloc(dev, desc->num_domains,
+ sizeof(*ppu->domains), GFP_KERNEL);
+ if (!ppu->domains)
+ return -ENOMEM;
+
+ ppu->num_domains = desc->num_domains;
+ platform_set_drvdata(pdev, ppu);
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ clk = devm_clk_get_enabled(dev, NULL);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ rst = devm_reset_control_get_exclusive(dev, NULL);
+ if (IS_ERR(rst))
+ return PTR_ERR(rst);
+
+ ret = reset_control_deassert(rst);
+ if (ret)
+ return ret;
+
+ for (unsigned int i = 0; i < ppu->num_domains; ++i) {
+ struct sun20i_ppu_pd *pd = &pds[i];
+
+ pd->genpd.name = desc->names[i];
+ pd->genpd.power_off = sun20i_ppu_pd_power_off;
+ pd->genpd.power_on = sun20i_ppu_pd_power_on;
+ pd->base = base + PD_REGS_SIZE * i;
+
+ ret = pm_genpd_init(&pd->genpd, NULL, sun20i_ppu_pd_is_on(pd));
+ if (ret) {
+ dev_warn(dev, "Failed to add '%s' domain: %d\n",
+ pd->genpd.name, ret);
+ continue;
+ }
+
+ ppu->domains[i] = &pd->genpd;
+ }
+
+ ret = of_genpd_add_provider_onecell(dev->of_node, ppu);
+ if (ret)
+ dev_warn(dev, "Failed to add provider: %d\n", ret);
+
+ return 0;
+}
+
+static const char *const sun20i_d1_ppu_pd_names[] = {
+ "CPU",
+ "VE",
+ "DSP",
+};
+
+static const struct sun20i_ppu_desc sun20i_d1_ppu_desc = {
+ .names = sun20i_d1_ppu_pd_names,
+ .num_domains = ARRAY_SIZE(sun20i_d1_ppu_pd_names),
+};
+
+static const struct of_device_id sun20i_ppu_of_match[] = {
+ {
+ .compatible = "allwinner,sun20i-d1-ppu",
+ .data = &sun20i_d1_ppu_desc,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sun20i_ppu_of_match);
+
+static struct platform_driver sun20i_ppu_driver = {
+ .probe = sun20i_ppu_probe,
+ .driver = {
+ .name = "sun20i-ppu",
+ .of_match_table = sun20i_ppu_of_match,
+ /* Power domains cannot be removed while they are in use. */
+ .suppress_bind_attrs = true,
+ },
+};
+module_platform_driver(sun20i_ppu_driver);
+
+MODULE_AUTHOR("Samuel Holland <samuel@...lland.org>");
+MODULE_DESCRIPTION("Allwinner D1 PPU power domain driver");
+MODULE_LICENSE("GPL");
--
2.37.4
Powered by blists - more mailing lists