Date:   Sun,  1 Jan 2023 11:45:23 +0200
From:   Mike Rapoport <rppt@...nel.org>
To:     Jonathan Corbet <corbet@....net>
Cc:     Andrew Morton <akpm@...ux-foundation.org>,
        David Hildenbrand <david@...hat.com>,
        Johannes Weiner <hannes@...xchg.org>,
        Lorenzo Stoakes <lstoakes@...il.com>,
        "Matthew Wilcox (Oracle)" <willy@...radead.org>,
        Mel Gorman <mgorman@...e.de>, Michal Hocko <mhocko@...nel.org>,
        Mike Rapoport <rppt@...nel.org>,
        Vlastimil Babka <vbabka@...e.cz>, linux-doc@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-mm@...ck.org
Subject: [PATCH 2/2] docs/mm: Physical Memory: add structure, introduction and nodes description

From: "Mike Rapoport (IBM)" <rppt@...nel.org>

Signed-off-by: Mike Rapoport (IBM) <rppt@...nel.org>
---
 Documentation/mm/physical_memory.rst | 322 +++++++++++++++++++++++++++
 1 file changed, 322 insertions(+)

diff --git a/Documentation/mm/physical_memory.rst b/Documentation/mm/physical_memory.rst
index 2ab7b8c1c863..fcf52f1db16b 100644
--- a/Documentation/mm/physical_memory.rst
+++ b/Documentation/mm/physical_memory.rst
@@ -3,3 +3,325 @@
 ===============
 Physical Memory
 ===============
+
+Linux is available for a wide range of architectures so there is a need for an
+architecture-independent abstraction to represent the physical memory. This
+chapter describes the structures used to manage physical memory in a running
+system.
+
+The first principal concept prevalent in the memory management is
+`Non-Uniform Memory Access (NUMA)
+<https://en.wikipedia.org/wiki/Non-uniform_memory_access>`_.
+With multi-core and multi-socket machines, memory may be arranged into banks
+that incur a different cost to access depending on the “distance” from the
+processor. For example, there might be a bank of memory assigned to each CPU or
+a bank of memory very suitable for DMA near peripheral devices.
+
+Each bank is called a node and the concept is represented under Linux by a
+``struct pglist_data`` even if the architecture is UMA. This structure is
+always referenced to by it's typedef ``pg_data_t``. A pg_data_t structure
+for a particular node can be referenced by ``NODE_DATA(nid)`` macro where
+``nid`` is the ID of that node.
+
+For NUMA architectures, the node structures are allocated by the architecture
+specific code early during boot. Usually, these structures are allocated
+locally on the memory bank they represent. For UMA architectures, only one
+static pg_data_t structure called ``contig_page_data`` is used. Nodes will
+be discussed further in Section :ref:`Nodes <nodes>`
+
+Each node may be divided up into a number of blocks called zones which
+represent ranges within memory. These ranges are usually determined by
+architectural constraints for accessing the physical memory. A zone is
+described by a ``struct zone_struct``, typedeffed to ``zone_t`` and each zone
+has one of the types described below.
+
+`ZONE_DMA` and `ZONE_DMA32`
+  represent memory suitable for DMA by peripheral devices that cannot
+  access all of the addressable memory. Depending on the architecture,
+  either of these zone types or even they both can be disabled at build
+  time using ``CONFIG_ZONE_DMA`` and ``CONFIG_ZONE_DMA32`` configuration
+  options. Some 64-bit platforms may need both zones as they support
+  peripherals with different DMA addressing limitations.
+
+`ZONE_NORMAL`
+  is for normal memory that can be accessed by the kernel all the time. DMA
+  operations can be performed on pages in this zone if the DMA devices support
+  transfers to all addressable memory. ZONE_NORMAL is always enabled.
+
+`ZONE_HIGHMEM`
+  is the part of the physical memory that is not covered by a permanent mapping
+  in the kernel page tables. The memory in this zone is only accessible to the
+  kernel using temporary mappings. This zone is available only some 32-bit
+  architectures and is enabled with ``CONFIG_HIGHMEM``.
+
+`ZONE_MOVABLE`
+  is for normal accessible memory, just like ZONE_NORMAL. The difference is
+  that most pages in ZONE_MOVABLE are movable. That means that while virtual
+  addresses of these pages do not change, their content may move between
+  different physical pages. ZONE_MOVABLE is only enabled when one of
+  `kernelcore`, `movablecore` and `movable_node` parameters is present in the
+  kernel command line. See :ref:`Page migration <page_migration>` for
+  additional details.
+
+`ZONE_DEVICE`
+  represents memory residing on devices such as PMEM and GPU. It has different
+  characteristics than RAM zone types and it exists to provide :ref:`struct
+  page <Pages>` and memory map services for device driver identified physical
+  address ranges. ZONE_DEVICE is enabled with configuration option
+  ``CONFIG_ZONE_DEVICE``.
+
+It is important to note that many kernel operations can only take place using
+ZONE_NORMAL so it is the most performance critical zone. Zones are discussed
+further in Section :ref:`Zones <zones>`.
+
+The relation between node and zone extents is determined by the physical memory
+map reported by the firmware, architectural constraints for memory addressing
+and certain parameters in the kernel command line.
+
+For example, with 32-bit kernel on an x86 UMA machine with 2 Gbytes of RAM the
+entire memory will be on node 0 and there will be three zones: ZONE_DMA,
+ZONE_NORMAL and ZONE_HIGHMEM::
+
+  0                                                            2G
+  +-------------------------------------------------------------+
+  |                            node 0                           |
+  +-------------------------------------------------------------+
+
+  0         16M                    896M                        2G
+  +----------+-----------------------+--------------------------+
+  | ZONE_DMA |      ZONE_NORMAL      |       ZONE_HIGHMEM       |
+  +----------+-----------------------+--------------------------+
+
+
+With a kernel built with ZONE_DMA disabled and ZONE_DMA32 enabled and booted
+with `movablecore=80%` parameter on an arm64 machine with 16 Gbytes of RAM
+equally split between two nodes, there will be ZONE_DMA32, ZONE_NORMAL and
+ZONE_MOVABLE on node 0, and ZONE_NORMAL and ZONE_MOVABLE on node 1::
+
+
+  1G                                9G                         17G
+  +--------------------------------+ +--------------------------+
+  |              node 0            | |          node 1          |
+  +--------------------------------+ +--------------------------+
+
+  1G       4G        4200M          9G          9320M          17G
+  +---------+----------+-----------+ +------------+-------------+
+  |  DMA32  |  NORMAL  |  MOVABLE  | |   NORMAL   |   MOVABLE   |
+  +---------+----------+-----------+ +------------+-------------+
+
+.. _nodes:
+
+Nodes
+=====
+
+As we have mentioned, each node in memory is described by a ``pg_data_t`` which
+is a typedef for a ``struct pglist_data``. When allocating a page, by default
+Linux uses a node-local allocation policy to allocate memory from the node
+closest to the running CPU. As processes tend to run on the same CPU, it is
+likely the memory from the current node will be used. The allocation policy can
+be controlled by users as described in
+`Documentation/admin-guide/mm/numa_memory_policy.rst`.
+
+Most NUMA architectures maintain an array of pointers to the node
+structures. The actual structures are allocated early during boot when
+architecture specific code parses the physical memory map reported by the
+firmware. The bulk of the node initialization happens slightly later in the
+boot process by free_area_init() function, described later in Section
+:ref:`Initialization <initialization>`.
+
+
+Along with the node structures, kernel maintains an array of ``nodemask_t``
+bitmasks called `node_states`. Each bitmask in this array represents a set of
+nodes with particular properties as defined by `enum node_states`:
+
+`N_POSSIBLE`
+  The node could become online at some point.
+`N_ONLINE`
+  The node is online.
+`N_NORMAL_MEMORY`
+  The node has regular memory.
+`N_HIGH_MEMORY`
+  The node has regular or high memory. When ``CONFIG_HIGHMEM`` is disabled
+  aliased to `N_NORMAL_MEMORY`.
+`N_MEMORY`
+  The node has memory(regular, high, movable)
+`N_CPU`
+  The node has one or more CPUs
+
+For each node that has a property described above, the bit corresponding to the
+node ID in the ``node_states[<property>]`` bitmask is set.
+
+For example, for node 2 with normal memory and CPUs, bit 2 will be set in ::
+
+  node_states[N_POSSIBLE]
+  node_states[N_ONLINE]
+  node_states[N_NORMAL_MEMORY]
+  node_states[N_MEMORY]
+  node_states[N_CPU]
+
+For various operations possible with nodemasks please refer to
+`include/linux/nodemask.h
+<https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/nodemask.h>`_.
+
+Among other things, nodemasks are used to provide macros for node traversal,
+namely `for_each_node()` and `for_each_online_node()`.
+
+For instance, to call a function foo() for each online node::
+
+	for_each_online_node(nid) {
+		pg_data_t *pgdat = NODE_DATA(nid);
+
+		foo(pgdat);
+	}
+
+Node structure
+--------------
+
+The struct pglist_data is declared in `include/linux/mmzone.h
+<https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/mmzone.h>`_.
+Here we briefly describe fields of this structure:
+
+General
+~~~~~~~
+
+`node_zones`
+  The zones for this node.  Not all of the zones may be populated, but it is
+  the full list. It is referenced by this node's node_zonelists as well as
+  other node's node_zonelists.
+
+`node_zonelists` The list of all zones in all nodes. This list defines the
+  order of zones that allocations are preferred from. The `node_zonelists` is
+  set up by build_zonelists() in mm/page_alloc.c during the initialization of
+  core memory management structures.
+
+`nr_zones`
+  Number of populated zones in this node.
+
+`node_mem_map`
+  For UMA systems that use FLATMEM memory model the 0's node (and the only)
+  `node_mem_map` is array of struct pages representing each physical frame.
+
+`node_page_ext`
+  For UMA systems that use FLATMEM memory model the 0's (and the only) node
+  `node_mem_map` is array of extensions of struct pages. Available only in the
+  kernels built with ``CONFIG_PAGE_EXTENTION`` enabled.
+
+`node_start_pfn`
+  The page frame number of the starting page frame in this node.
+
+`node_present_pages`
+  Total number of physical pages present in this node.
+
+`node_spanned_pages`
+  Total size of physical page range, including holes.
+
+`node_size_lock`
+  A lock that protects the fields defining the node extents. Only defined when
+  at least one of ``CONFIG_MEMORY_HOTPLUG`` or
+  ``CONFIG_DEFERRED_STRUCT_PAGE_INIT`` configuration options are enabled.
+
+  pgdat_resize_lock() and pgdat_resize_unlock() are provided to manipulate
+  node_size_lock without checking for CONFIG_MEMORY_HOTPLUG or
+  CONFIG_DEFERRED_STRUCT_PAGE_INIT.
+
+`node_id`
+  The Node ID (NID) of the node, starts at 0.
+
+`totalreserve_pages`
+  This is a per~node reserve of pages that are not available to userspace
+  allocations.
+
+`first_deferred_pfn`
+  If memory initialization on large machines is deferred then this is the first
+  PFN that needs to be initialized. Defined only when
+  ``CONFIG_DEFERRED_STRUCT_PAGE_INIT`` is enabled
+
+`deferred_split_queue`
+  Per-node queue of huge pages that their split was deferred. Defined only when ``CONFIG_TRANSPARENT_HUGEPAGE`` is enabled.
+
+`__lruvec`
+  Per-node lruvec holding LRU lists and related parameters. Used only when memory cgroups are disabled. Should not be accessed directly, use mem_cgroup_lruvec() to look up lruvecs instead.
+
+Reclaim control
+~~~~~~~~~~~~~~~
+
+See also :ref:`Page Reclaim <page_reclaim>`.
+
+`kswapd`
+  Per-node instance of kswapd kernel thread.
+
+`kswapd_wait`, `pfmemalloc_wait`, `reclaim_wait`
+  Workqueues used to synchronize memory reclaim tasks
+
+`nr_writeback_throttled`
+  Number of tasks that are throttled waiting on dirty pages to clean.
+
+`nr_reclaim_start`
+  Number of pages written while reclaim is throttled waiting for writeback.
+
+`kswapd_order`
+  Controls the order kswapd tries to reclaim
+
+`kswapd_highest_zoneidx`
+  The highest zone index to be reclaimed by kswapd
+
+`kswapd_failures`
+  Number of runs kswapd was unable to reclaim any pages
+
+`min_unmapped_pages`
+  Minimal number of unmapped file backed pages that cannot be reclaimed. Determined by vm.min_unmapped_ratio sysctl.
+  Only defined when ``CONFIG_NUMA`` is enabled.
+
+`min_slab_pages`
+  Minimal number of SLAB pages that cannot be reclaimed. Determined by vm.min_slab_ratio sysctl.
+  Only defined when ``CONFIG_NUMA`` is enabled
+
+`flags`
+  Flags controlling reclaim behavior.
+
+Compaction control
+~~~~~~~~~~~~~~~~~~
+
+`kcompactd_max_order`
+  Page order that kcompactd should try to achieve.
+
+`kcompactd_highest_zoneidx`
+  The highest zone index to be compacted by kcompactd.
+
+`kcompactd_wait`
+  Workqueue used to synchronizes memory compaction tasks.
+
+`kcompactd`
+  Per-node instance of kcompactd kernel thread.
+
+`proactive_compact_trigger`
+  Determines if proactive compaction is enabled. Controlled by vm.compaction_proactiveness sysctl.
+
+Statistics
+~~~~~~~~~~
+
+`per_cpu_nodestats`
+  Per-CPU VM statistics for the node
+
+`vm_stat`
+  VM statistics for the node.
+
+.. _zones:
+
+Zones
+=====
+
+.. _pages:
+
+Pages
+=====
+
+.. _folios:
+
+Folios
+======
+
+.. _initialization:
+
+Initialization
+==============
-- 
2.35.1

Powered by blists - more mailing lists