| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <853cbc6e-ae49-b2be-fb64-43f5171b74e8@linaro.org>
Date: Mon, 2 Jan 2023 10:30:58 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Marijn Suijten <marijn.suijten@...ainline.org>,
phone-devel@...r.kernel.org,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
~postmarketos/upstreaming@...ts.sr.ht,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>,
Martin Botka <martin.botka@...ainline.org>,
Jami Kettunen <jami.kettunen@...ainline.org>,
Rob Clark <robdclark@...il.com>, Sean Paul <sean@...rly.run>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Stephen Boyd <swboyd@...omium.org>,
Vinod Koul <vkoul@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Kuogee Hsieh <quic_khsieh@...cinc.com>,
Jessica Zhang <quic_jesszhan@...cinc.com>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Loic Poulain <loic.poulain@...aro.org>,
Vinod Polimera <quic_vpolimer@...cinc.com>,
Adam Skladowski <a39.skl@...il.com>,
linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
Kalyan Thota <quic_kalyant@...cinc.com>
Subject: Re: [RFC PATCH 3/7] drm/msm/dpu: Disable MDP vsync source selection
on DPU 5.0.0 and above
On 31.12.2022 22:52, Marijn Suijten wrote:
> On 2022-12-31 22:50:02, Marijn Suijten wrote:
>> Since hardware revision 5.0.0 the TE configuration moved out of the
>> PINGPONG block into the INTF block, including vsync source selection
>> that was previously part of MDP top. Writing to the MDP_VSYNC_SEL
>> register has no effect anymore and is omitted downstream via the
>> DPU/SDE_MDP_VSYNC_SEL feature flag. This flag is only added to INTF
>> blocks used by hardware prior to 5.0.0.
>>
>> The code that writes to these registers in the INTF block will follow in
>> subsequent patches.
>>
>> Signed-off-by: Marijn Suijten <marijn.suijten@...ainline.org>
>> ---
>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 33 ++++++++++--
>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c | 52 +++++++++++++------
>> 3 files changed, 66 insertions(+), 20 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> index 39d4b293710c..1cfe94494135 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> @@ -407,7 +407,7 @@ static const struct dpu_mdp_cfg msm8998_mdp[] = {
>> {
>> .name = "top_0", .id = MDP_TOP,
>> .base = 0x0, .len = 0x458,
>> - .features = 0,
>> + .features = BIT(DPU_MDP_VSYNC_SEL),
>> .highest_bank_bit = 0x2,
>> .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
>> .reg_off = 0x2AC, .bit_off = 0},
>> @@ -436,7 +436,7 @@ static const struct dpu_mdp_cfg sdm845_mdp[] = {
>> {
>> .name = "top_0", .id = MDP_TOP,
>> .base = 0x0, .len = 0x45C,
>> - .features = BIT(DPU_MDP_AUDIO_SELECT),
>> + .features = BIT(DPU_MDP_AUDIO_SELECT) | BIT(DPU_MDP_VSYNC_SEL),
>> .highest_bank_bit = 0x2,
>> .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
>> .reg_off = 0x2AC, .bit_off = 0},
>> @@ -512,6 +512,31 @@ static const struct dpu_mdp_cfg sm6115_mdp[] = {
>> },
>> };
>>
>> +static const struct dpu_mdp_cfg sdm8150_mdp[] = {
>
> Sometimes it is only possible to spot such things _after_ sending,
> probably the thing that makes us human :)
>
> sm8150_mdp*, not sdm.
>
> - Marijn
>
>> + {
>> + .name = "top_0", .id = MDP_TOP,
>> + .base = 0x0, .len = 0x45C,
>> + .features = BIT(DPU_MDP_AUDIO_SELECT),
>> + .highest_bank_bit = 0x2,
>> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
>> + .reg_off = 0x2AC, .bit_off = 0},
Keeping the hex values lowercase would be nice.
Konrad
>> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
>> + .reg_off = 0x2B4, .bit_off = 0},
>> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
>> + .reg_off = 0x2BC, .bit_off = 0},
>> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
>> + .reg_off = 0x2C4, .bit_off = 0},
>> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
>> + .reg_off = 0x2AC, .bit_off = 8},
>> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
>> + .reg_off = 0x2B4, .bit_off = 8},
>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
>> + .reg_off = 0x2BC, .bit_off = 8},
>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
>> + .reg_off = 0x2C4, .bit_off = 8},
>> + },
>> +};
>> +
>> static const struct dpu_mdp_cfg sm8250_mdp[] = {
>> {
>> .name = "top_0", .id = MDP_TOP,
>> @@ -1901,8 +1926,8 @@ static const struct dpu_mdss_cfg sm6115_dpu_cfg = {
>>
>> static const struct dpu_mdss_cfg sm8150_dpu_cfg = {
>> .caps = &sm8150_dpu_caps,
>> - .mdp_count = ARRAY_SIZE(sdm845_mdp),
>> - .mdp = sdm845_mdp,
>> + .mdp_count = ARRAY_SIZE(sdm8150_mdp),
>> + .mdp = sdm8150_mdp,
>> .ctl_count = ARRAY_SIZE(sm8150_ctl),
>> .ctl = sm8150_ctl,
>> .sspp_count = ARRAY_SIZE(sdm845_sspp),
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> index 3b645d5aa9aa..e0e153889ab7 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> @@ -93,6 +93,7 @@ enum {
>> DPU_MDP_UBWC_1_0,
>> DPU_MDP_UBWC_1_5,
>> DPU_MDP_AUDIO_SELECT,
>> + DPU_MDP_VSYNC_SEL,
>> DPU_MDP_MAX
>> };
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>> index c3110a25a30d..2e699c9ad13c 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>> @@ -151,28 +151,16 @@ static void dpu_hw_get_danger_status(struct dpu_hw_mdp *mdp,
>> status->sspp[SSPP_CURSOR1] = (value >> 26) & 0x3;
>> }
>>
>> -static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
>> +static void dpu_hw_setup_vsync_source_v1(struct dpu_hw_mdp *mdp,
>> struct dpu_vsync_source_cfg *cfg)
>> {
>> struct dpu_hw_blk_reg_map *c;
>> - u32 reg, wd_load_value, wd_ctl, wd_ctl2, i;
>> - static const u32 pp_offset[PINGPONG_MAX] = {0xC, 0x8, 0x4, 0x13, 0x18};
>> + u32 reg, wd_load_value, wd_ctl, wd_ctl2;
>>
>> - if (!mdp || !cfg || (cfg->pp_count > ARRAY_SIZE(cfg->ppnumber)))
>> + if (!mdp || !cfg)
>> return;
>>
>> c = &mdp->hw;
>> - reg = DPU_REG_READ(c, MDP_VSYNC_SEL);
>> - for (i = 0; i < cfg->pp_count; i++) {
>> - int pp_idx = cfg->ppnumber[i] - PINGPONG_0;
>> -
>> - if (pp_idx >= ARRAY_SIZE(pp_offset))
>> - continue;
>> -
>> - reg &= ~(0xf << pp_offset[pp_idx]);
>> - reg |= (cfg->vsync_source & 0xf) << pp_offset[pp_idx];
>> - }
>> - DPU_REG_WRITE(c, MDP_VSYNC_SEL, reg);
>>
>> if (cfg->vsync_source >= DPU_VSYNC_SOURCE_WD_TIMER_4 &&
>> cfg->vsync_source <= DPU_VSYNC_SOURCE_WD_TIMER_0) {
>> @@ -219,6 +207,33 @@ static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
>> }
>> }
>>
>> +static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
>> + struct dpu_vsync_source_cfg *cfg)
>> +{
>> + struct dpu_hw_blk_reg_map *c;
>> + u32 reg, i;
>> + static const u32 pp_offset[PINGPONG_MAX] = {0xC, 0x8, 0x4, 0x13, 0x18};
>> +
>> + if (!mdp || !cfg || (cfg->pp_count > ARRAY_SIZE(cfg->ppnumber)))
>> + return;
>> +
>> + c = &mdp->hw;
>> +
>> + reg = DPU_REG_READ(c, MDP_VSYNC_SEL);
>> + for (i = 0; i < cfg->pp_count; i++) {
>> + int pp_idx = cfg->ppnumber[i] - PINGPONG_0;
>> +
>> + if (pp_idx >= ARRAY_SIZE(pp_offset))
>> + continue;
>> +
>> + reg &= ~(0xf << pp_offset[pp_idx]);
>> + reg |= (cfg->vsync_source & 0xf) << pp_offset[pp_idx];
>> + }
>> + DPU_REG_WRITE(c, MDP_VSYNC_SEL, reg);
>> +
>> + dpu_hw_setup_vsync_source_v1(mdp, cfg);
>> +}
>> +
>> static void dpu_hw_get_safe_status(struct dpu_hw_mdp *mdp,
>> struct dpu_danger_safe_status *status)
>> {
>> @@ -266,7 +281,12 @@ static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
>> ops->setup_split_pipe = dpu_hw_setup_split_pipe;
>> ops->setup_clk_force_ctrl = dpu_hw_setup_clk_force_ctrl;
>> ops->get_danger_status = dpu_hw_get_danger_status;
>> - ops->setup_vsync_source = dpu_hw_setup_vsync_source;
>> +
>> + if (cap & BIT(DPU_MDP_VSYNC_SEL))
>> + ops->setup_vsync_source = dpu_hw_setup_vsync_source;
>> + else
>> + ops->setup_vsync_source = dpu_hw_setup_vsync_source_v1;
>> +
>> ops->get_safe_status = dpu_hw_get_safe_status;
>>
>> if (cap & BIT(DPU_MDP_AUDIO_SELECT))
>> --
>> 2.39.0
>>
Powered by blists - more mailing lists