| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230104171643.1004054-3-konrad.dybcio@linaro.org>
Date: Wed, 4 Jan 2023 18:16:42 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: linux-arm-msm@...r.kernel.org, andersson@...nel.org,
agross@...nel.org, krzysztof.kozlowski@...aro.org
Cc: marijn.suijten@...ainline.org,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Georgi Djakov <djakov@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Sibi Sankar <quic_sibis@...cinc.com>, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 3/3] arm64: dts: qcom: sm6350: Set up DDR & L3 scaling
Add the CPU OPP tables including core frequency and L3 bus frequency.
The L3 throughput values were chosen by studying the frequencies
available in HW LUT and picking the highest one that's less than the
CPU frequency. DDR clock rates come from the vendor kernel.
Available values from the HW LUT:
300000000
556800000
652800000
806400000
844800000
940800000
1132800000
1209600000
1286400000
1401600000
1459200000
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
v1 -> v2:
Make sure to tag the paths with an ACTIVE moniker, so that the poor
thing doesn't spontaneously decide to vote for 8GiB/s of DDR bandwith
while sleeping..
arch/arm64/boot/dts/qcom/sm6350.dtsi | 140 +++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm7225.dtsi | 19 ++++
2 files changed, 159 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 893a1ffb5e3d..94a6f6cdfdd6 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -10,6 +10,8 @@
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sm6350.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
@@ -49,6 +51,10 @@ CPU0: cpu@0 {
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_0: l2-cache {
compatible = "cache";
@@ -68,6 +74,10 @@ CPU1: cpu@100 {
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_100>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_100: l2-cache {
compatible = "cache";
@@ -84,6 +94,10 @@ CPU2: cpu@200 {
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_200>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_200: l2-cache {
compatible = "cache";
@@ -100,6 +114,10 @@ CPU3: cpu@300 {
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_300>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_300: l2-cache {
compatible = "cache";
@@ -116,6 +134,10 @@ CPU4: cpu@400 {
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_400>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_400: l2-cache {
compatible = "cache";
@@ -132,6 +154,10 @@ CPU5: cpu@500 {
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_500>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_500: l2-cache {
compatible = "cache";
@@ -149,6 +175,10 @@ CPU6: cpu@600 {
dynamic-power-coefficient = <703>;
next-level-cache = <&L2_600>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu6_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_600: l2-cache {
compatible = "cache";
@@ -165,6 +195,10 @@ CPU7: cpu@700 {
dynamic-power-coefficient = <703>;
next-level-cache = <&L2_700>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu6_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_700: l2-cache {
compatible = "cache";
@@ -222,6 +256,112 @@ memory@...00000 {
reg = <0x0 0x80000000 0x0 0x0>;
};
+ cpu0_opp_table: opp-table-cpu0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ /* DDR: 4-wide, 2 channels, double data rate, L3: 16-wide, 2 channels */
+ opp-peak-kBps = <(200000 * 4 * 2 * 2) (300000 * 16 * 2)>;
+ };
+
+ opp-576000000 {
+ opp-hz = /bits/ 64 <576000000>;
+ opp-peak-kBps = <(547000 * 4 * 2 * 2) (556800 * 16 * 2)>;
+ };
+
+ opp-768000000 {
+ opp-hz = /bits/ 64 <768000000>;
+ opp-peak-kBps = <(768000 * 4 * 2 * 2) (652800 * 16 * 2)>;
+ };
+
+ opp-1017600000 {
+ opp-hz = /bits/ 64 <1017600000>;
+ opp-peak-kBps = <(1017000 * 4 * 2 * 2) (940800 * 16 * 2)>;
+ };
+
+ opp-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1209600 * 16 * 2)>;
+ };
+
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1286400 * 16 * 2)>;
+ };
+
+ opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ opp-peak-kBps = <(1353000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+
+ opp-1612800000 {
+ opp-hz = /bits/ 64 <1612800000>;
+ opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+
+ opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+ };
+
+ cpu6_opp_table: opp-table-cpu6 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-peak-kBps = <(200000 * 4 * 2 * 2) (300000 * 16 * 2)>;
+ };
+
+ opp-787200000 {
+ opp-hz = /bits/ 64 <787200000>;
+ opp-peak-kBps = <(768000 * 4 * 2 * 2) (652800 * 16 * 2)>;
+ };
+
+ opp-979200000 {
+ opp-hz = /bits/ 64 <979200000>;
+ opp-peak-kBps = <(768000 * 4 * 2 * 2) (940800 * 16 * 2)>;
+ };
+
+ opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ opp-peak-kBps = <(1017000 * 4 * 2 * 2) (940800 * 16 * 2)>;
+ };
+
+ opp-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1209600 * 16 * 2)>;
+ };
+
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ opp-peak-kBps = <(1353000 * 4 * 2 * 2) (1401600 * 16 * 2)>;
+ };
+
+ opp-1555200000 {
+ opp-hz = /bits/ 64 <1555200000>;
+ opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+
+ opp-1766400000 {
+ opp-hz = /bits/ 64 <1766400000>;
+ opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+
+ opp-1900800000 {
+ opp-hz = /bits/ 64 <1900800000>;
+ opp-peak-kBps = <(1804000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+
+ opp-2073600000 {
+ opp-hz = /bits/ 64 <2073600000>;
+ opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sm7225.dtsi b/arch/arm64/boot/dts/qcom/sm7225.dtsi
index 7b2a002ca7ff..b7b4044e9bb0 100644
--- a/arch/arm64/boot/dts/qcom/sm7225.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm7225.dtsi
@@ -14,3 +14,22 @@
&CPU5 { compatible = "qcom,kryo570"; };
&CPU6 { compatible = "qcom,kryo570"; };
&CPU7 { compatible = "qcom,kryo570"; };
+
+&cpu0_opp_table {
+ opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-peak-kBps = <(1804000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+};
+
+&cpu6_opp_table {
+ opp-2131200000 {
+ opp-hz = /bits/ 64 <2131200000>;
+ opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+
+ opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+ };
+};
--
2.39.0
Powered by blists - more mailing lists