| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Y7cLJpgnP50JzHps@fedora>
Date: Thu, 5 Jan 2023 18:38:46 +0100
From: José Expósito <jose.exposito89@...il.com>
To: Joshua Goins <josh@...strate.com>
Cc: linux-input@...r.kernel.org, kernel test robot <lkp@...el.com>,
Dan Carpenter <error27@...il.com>,
Jiri Kosina <jikos@...nel.org>,
Benjamin Tissoires <benjamin.tissoires@...hat.com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] HID: uclogic: Add support for XP-PEN Artist 22R Pro
On Mon, Jan 02, 2023 at 02:49:10PM -0500, Joshua Goins wrote:
> Adds support for the XP-PEN Artist 22R Pro, including stylus, tablet frame
> and pen pressure.
>
> The tablet has 20 buttons, but need to be remapped in order since the
> device reports invalid keycodes. Existing tablet functionality should
> not be inhibited, as BTN0-8 is still used.
>
> New initialization functions are added since the device differs slightly
> from other UGEE v2 devices.
>
> Reported-by: kernel test robot <lkp@...el.com>
> Reported-by: Dan Carpenter <error27@...il.com>
> Reported-by: José Expósito <jose.exposito89@...il.com>
> Signed-off-by: Joshua Goins <josh@...strate.com>
> ---
> v2 changes:
> - rewrote initialization code to be more concise, and less error-prone, thanks
> Dan Carpenter & José Expósito for pointers!
> - less struct duplication, it now uses compatiable UGEE v2 ones.
> - uclogic_extra_input_mapping is now static, thanks José again!
> - straightened out dial transformation, now there's just the two cases and
> they're decimal.
> - fixed the patch formatting, it should be easier to apply now.
> - rebased onto 6.2-rc2
>
> I kept the new initialization functions seperate, please review and tell me if
> they are better suited being merged into their UGEE v2 counterparts (which would
> involve a lot of branching). I don't have another UGEE v2 tablet to test, so I
> won't be able to test for regressions for those devices myself, so I refrained
> from those changes in this patch.
>
> Original message:
> I did not do the research for this hardware, or the original patch - that work
> has been done by Aren Villanueva. For some reason they decided not to merge
> it. My changes include remapping the stupid amount of tablet frame buttons,
> cleaning up the code to match kernel style, and other small stuff.
>
> The tablet is (almost) fully functional even when uclogic doesn't handle it.
> Without initialization, the tablet has some sort of "basic driverless mode"
> that allows the tablet frame buttons to have some default keys associated with
> them (CTRL-S, CTRL-Z, that kind of stuff), but unfortunately the stylus pen
> semi-works. While pressure sensitivity works, only one stylus button functions
> correctly. Since the initialization process differs for Pro series tablets, the
> new function uclogic_params_init_ugee_xppen_pro had to be introduced. I also
> added USB HID IDs for this tablet too, but it's classified under the UGEE
> vendor ID.
>
> One of the more strange things I had to do is figure out a way to remap the
> buttons since there are 20 of them in total, and of course there are more
> buttons than there are BTN constants defined for us. When running without
> uclogic, it starts at BTN_0, ends at BTN_8 and the tablet starts reporting
> nonsensical keycodes so just leaving it alone isn't an option. I'm testing
> this under a libinput system, which has a list of buttons it considers "tablet
> pad buttons" which are notably BTN_0, BTN_1, so on and some
> gamepad/joystick buttons. So I created a new array called
> uclogic_extra_input_mapping for 20 working inputs.
>
> Another weird feature of this tablet is the second dial, which the original
> patchset introduced a new uclogic_frame param to handle since it seems it
> throws both dials values into one byte. The left wheel is considered EV_WHEEL
> and the other, EV_HWHEEL which seems fine to me. I also added the new param to
> the debug messages too.
>
>
> drivers/hid/hid-ids.h | 1 +
> drivers/hid/hid-uclogic-core.c | 66 +++++++++++-
> drivers/hid/hid-uclogic-params.c | 180 +++++++++++++++++++++++++++++++
> drivers/hid/hid-uclogic-params.h | 5 +
> drivers/hid/hid-uclogic-rdesc.c | 50 +++++++++
> drivers/hid/hid-uclogic-rdesc.h | 9 ++
> 6 files changed, 307 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> index 82713ef3aaa6..81d04054229a 100644
> --- a/drivers/hid/hid-ids.h
> +++ b/drivers/hid/hid-ids.h
> @@ -1298,6 +1298,7 @@
> #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L 0x0935
> #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S 0x0909
> #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_STAR06 0x0078
> +#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_22R_PRO 0x091b
> #define USB_DEVICE_ID_UGEE_TABLET_G5 0x0074
> #define USB_DEVICE_ID_UGEE_TABLET_EX07S 0x0071
> #define USB_DEVICE_ID_UGEE_TABLET_RAINBOW_CV720 0x0055
> diff --git a/drivers/hid/hid-uclogic-core.c b/drivers/hid/hid-uclogic-core.c
> index 7fa6fe04f1b2..8d92e984f984 100644
> --- a/drivers/hid/hid-uclogic-core.c
> +++ b/drivers/hid/hid-uclogic-core.c
> @@ -81,6 +81,30 @@ static __u8 *uclogic_report_fixup(struct hid_device *hdev, __u8 *rdesc,
> return rdesc;
> }
>
> +/* Buttons considered valid tablet pad inputs. */
> +static const unsigned int uclogic_extra_input_mapping[] = {
> + BTN_0,
> + BTN_1,
> + BTN_2,
> + BTN_3,
> + BTN_4,
> + BTN_5,
> + BTN_6,
> + BTN_7,
> + BTN_8,
I see this event codes in a test device mock in libinput, but I wonder
if we could/should use BTN_9 instead of skiping a few IDs here.
Honestly, I don't now what should be the right approach in this case,
let's see if someone else comments on this topic.
> + BTN_RIGHT,
> + BTN_MIDDLE,
> + BTN_SIDE,
> + BTN_EXTRA,
> + BTN_FORWARD,
> + BTN_BACK,
> + BTN_B,
> + BTN_A,
> + BTN_BASE,
> + BTN_BASE2,
> + BTN_X
> +};
> +
> static int uclogic_input_mapping(struct hid_device *hdev,
> struct hid_input *hi,
> struct hid_field *field,
> @@ -91,9 +115,27 @@ static int uclogic_input_mapping(struct hid_device *hdev,
> struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev);
> struct uclogic_params *params = &drvdata->params;
>
> - /* Discard invalid pen usages */
> - if (params->pen.usage_invalid && (field->application == HID_DG_PEN))
> - return -1;
> + if (field->application == HID_GD_KEYPAD) {
> + /*
> + * Remap input buttons to sensible ones that are not invalid.
> + * This only affects previous behavior for devices with more than ten or so buttons.
> + */
> + const int key = (usage->hid & HID_USAGE) - 1;
> +
> + if (key > 0 && key < ARRAY_SIZE(uclogic_extra_input_mapping)) {
> + hid_map_usage(hi,
> + usage,
> + bit,
> + max,
> + EV_KEY,
> + uclogic_extra_input_mapping[key]);
> + return 1;
> + }
> + } else if (field->application == HID_DG_PEN) {
> + /* Discard invalid pen usages */
> + if (params->pen.usage_invalid)
> + return -1;
> + }
>
> /* Let hid-core decide what to do */
> return 0;
> @@ -403,8 +445,22 @@ static int uclogic_raw_event_frame(
>
> /* If need to, and can, transform the bitmap dial reports */
> if (frame->bitmap_dial_byte > 0 && frame->bitmap_dial_byte < size) {
> - if (data[frame->bitmap_dial_byte] == 2)
> + switch (data[frame->bitmap_dial_byte]) {
> + case 2:
> data[frame->bitmap_dial_byte] = -1;
> + break;
> +
> + /* Everything below here is for tablets that shove multiple dials into 1 byte */
> + case 16:
> + data[frame->bitmap_dial_byte] = 0;
> + data[frame->bitmap_second_dial_destination_byte] = 1;
> + break;
> +
> + case 32:
> + data[frame->bitmap_dial_byte] = 0;
> + data[frame->bitmap_second_dial_destination_byte] = -1;
> + break;
> + }
> }
>
> return 0;
> @@ -531,6 +587,8 @@ static const struct hid_device_id uclogic_devices[] = {
> USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S) },
> { HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
> USB_DEVICE_ID_UGEE_XPPEN_TABLET_STAR06) },
> + { HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
> + USB_DEVICE_ID_UGEE_XPPEN_TABLET_22R_PRO) },
> { }
> };
> MODULE_DEVICE_TABLE(hid, uclogic_devices);
> diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
> index cd1233d7e253..d53c464a1b15 100644
> --- a/drivers/hid/hid-uclogic-params.c
> +++ b/drivers/hid/hid-uclogic-params.c
> @@ -103,6 +103,8 @@ static void uclogic_params_frame_hid_dbg(
> frame->touch_flip_at);
> hid_dbg(hdev, "\t\t.bitmap_dial_byte = %u\n",
> frame->bitmap_dial_byte);
> + hid_dbg(hdev, "\t\t.bitmap_second_dial_destination_byte = %u\n",
> + frame->bitmap_second_dial_destination_byte);
> }
>
> /**
> @@ -1418,6 +1420,174 @@ static int uclogic_params_ugee_v2_init(struct uclogic_params *params,
> return rc;
> }
>
> +/**
> + * uclogic_params_parse_ugee_xppen_pro_desc - parse the string descriptor
> + * containing pen and frame parameters returned by XP-PEN Pro devices.
> + *
> + * @str_desc: String descriptor, cannot be NULL.
> + * @str_desc_size: Size of the string descriptor.
> + * @desc_params: Output description params list.
> + * @desc_params_size: Size of the output description params list.
> + *
> + * Returns:
> + * Zero, if successful. A negative errno code on error.
> + */
> +static int uclogic_params_parse_ugee_xppen_pro_desc(const __u8 *str_desc,
I think that you could use uclogic_params_parse_ugee_v2_desc() and
change the number of buttons in the template afterwards. It'd avoid
some code duplication.
> + size_t str_desc_size,
> + s32 *desc_params,
> + size_t desc_params_size)
> +{
> + s32 pen_x_lm, pen_y_lm;
> + s32 pen_x_pm, pen_y_pm;
> + s32 pen_pressure_lm;
> + s32 resolution;
> +
> + /* Minimum descriptor length required, maximum seen so far is 14 */
> + const int min_str_desc_size = 12;
> +
> + if (!str_desc || str_desc_size < min_str_desc_size)
> + return -EINVAL;
> +
> + if (desc_params_size != UCLOGIC_RDESC_PH_ID_NUM)
> + return -EINVAL;
> +
> + pen_x_lm = get_unaligned_le16(str_desc + 2);
> + pen_y_lm = get_unaligned_le16(str_desc + 4);
> + pen_pressure_lm = get_unaligned_le16(str_desc + 8);
> +
> + resolution = get_unaligned_le16(str_desc + 10);
> + if (resolution == 0) {
> + pen_x_pm = 0;
> + pen_y_pm = 0;
> + } else {
> + pen_x_pm = pen_x_lm * 1000 / resolution;
> + pen_y_pm = pen_y_lm * 1000 / resolution;
> + }
> +
> + desc_params[UCLOGIC_RDESC_PEN_PH_ID_X_LM] = pen_x_lm;
> + desc_params[UCLOGIC_RDESC_PEN_PH_ID_X_PM] = pen_x_pm;
> + desc_params[UCLOGIC_RDESC_PEN_PH_ID_Y_LM] = pen_y_lm;
> + desc_params[UCLOGIC_RDESC_PEN_PH_ID_Y_PM] = pen_y_pm;
> + desc_params[UCLOGIC_RDESC_PEN_PH_ID_PRESSURE_LM] = pen_pressure_lm;
> +
> + return 0;
> +}
> +
> +/*
> + * uclogic_params_init_ugee_xppen_pro() - Initializes a UGEE XP-Pen Pro tablet device.
> + *
> + * @hdev: The HID device of the tablet interface to initialize and get
> + * parameters from. Cannot be NULL.
> + * @params: Parameters to fill in (to be cleaned with
> + * uclogic_params_cleanup()). Not modified in case of error.
> + * Cannot be NULL.
> + *
> + * Returns:
> + * Zero, if successful. A negative errno code on error.
> + */
> +static int uclogic_params_init_ugee_xppen_pro(struct uclogic_params *params,
There are some XP-Pen PRO devices handled by the other init function.
Maybe we could rename this function to something more specific to your
device.
> + struct hid_device *hdev,
> + const u8 rdesc_frame_arr[],
> + const size_t rdesc_frame_size)
> +{
> + int rc = 0;
> + struct usb_interface *iface;
> + __u8 bInterfaceNumber;
> + const int str_desc_len = 12;
> + u8 *str_desc = NULL;
> + __u8 *rdesc_pen = NULL;
> + s32 desc_params[UCLOGIC_RDESC_PH_ID_NUM];
> + /* The resulting parameters (noop) */
> + struct uclogic_params p = {0, };
> +
> + if (!hdev || !params) {
> + rc = -EINVAL;
> + goto cleanup;
> + }
> +
> + iface = to_usb_interface(hdev->dev.parent);
> + bInterfaceNumber = iface->cur_altsetting->desc.bInterfaceNumber;
> +
> + /* Ignore non-pen interfaces */
> + if (bInterfaceNumber != 2) {
> + uclogic_params_init_invalid(&p);
> + goto output;
> + }
> +
> + /*
> + * Initialize the interface by sending magic data.
> + * This magic data is the same as other UGEE v2 tablets.
> + */
> + rc = uclogic_probe_interface(hdev,
> + uclogic_ugee_v2_probe_arr,
> + uclogic_ugee_v2_probe_size,
> + 0x03);
You can use "uclogic_ugee_v2_probe_endpoint" here.
> + if (rc) {
> + uclogic_params_init_invalid(&p);
> + goto output;
> + }
> +
> + /**
> + * Read the string descriptor containing pen and frame parameters.
> + * These are slightly different than typical UGEE v2 devices.
> + */
> + rc = uclogic_params_get_str_desc(&str_desc, hdev, 100, str_desc_len);
> + if (rc != str_desc_len) {
> + hid_err(hdev, "failed retrieving pen and frame parameters: %d\n", rc);
> + uclogic_params_init_invalid(&p);
> + goto output;
> + }
> +
> + rc = uclogic_params_parse_ugee_xppen_pro_desc(str_desc, str_desc_len,
> + desc_params,
> + ARRAY_SIZE(desc_params));
> + if (rc)
> + goto cleanup;
> +
> + kfree(str_desc);
> + str_desc = NULL;
> +
> + /* Initialize the pen interface */
> + rdesc_pen = uclogic_rdesc_template_apply(
> + uclogic_rdesc_ugee_v2_pen_template_arr,
> + uclogic_rdesc_ugee_v2_pen_template_size,
> + desc_params, ARRAY_SIZE(desc_params));
> + if (!rdesc_pen) {
> + rc = -ENOMEM;
> + goto cleanup;
> + }
> +
> + p.pen.desc_ptr = rdesc_pen;
> + p.pen.desc_size = uclogic_rdesc_ugee_v2_pen_template_size;
> + p.pen.id = 0x02;
> + p.pen.subreport_list[0].value = 0xf0;
> + p.pen.subreport_list[0].id = UCLOGIC_RDESC_V1_FRAME_ID;
> +
> + /* Initialize the frame interface */
> + rc = uclogic_params_frame_init_with_desc(
> + &p.frame_list[0],
> + rdesc_frame_arr,
> + rdesc_frame_size,
> + UCLOGIC_RDESC_V1_FRAME_ID);
> + if (rc < 0) {
> + hid_err(hdev, "initializing frame params failed: %d\n", rc);
> + goto output;
> + }
> +
> + p.frame_list[0].bitmap_dial_byte = 7;
> + p.frame_list[0].bitmap_second_dial_destination_byte = 8;
> +
> +output:
> + /* Output parameters */
> + memcpy(params, &p, sizeof(*params));
> + memset(&p, 0, sizeof(p));
> + rc = 0;
> +cleanup:
> + kfree(str_desc);
> + uclogic_params_cleanup(&p);
> + return rc;
> +}
> +
> /**
> * uclogic_params_init() - initialize a tablet interface and discover its
> * parameters.
> @@ -1728,6 +1898,16 @@ int uclogic_params_init(struct uclogic_params *params,
> uclogic_params_init_invalid(&p);
> }
>
> + break;
> + case VID_PID(USB_VENDOR_ID_UGEE,
> + USB_DEVICE_ID_UGEE_XPPEN_TABLET_22R_PRO):
> + rc = uclogic_params_init_ugee_xppen_pro(&p,
> + hdev,
> + uclogic_rdesc_xppen_artist_22r_pro_frame_arr,
> + uclogic_rdesc_xppen_artist_22r_pro_frame_size);
> + if (rc != 0)
> + goto cleanup;
> +
> break;
> }
>
> diff --git a/drivers/hid/hid-uclogic-params.h b/drivers/hid/hid-uclogic-params.h
> index a97477c02ff8..6621a75a4b1a 100644
> --- a/drivers/hid/hid-uclogic-params.h
> +++ b/drivers/hid/hid-uclogic-params.h
> @@ -171,6 +171,11 @@ struct uclogic_params_frame {
> * counterclockwise, as opposed to the normal 1 and -1.
> */
> unsigned int bitmap_dial_byte;
> + /*
> + * Destination offset for the second bitmap dial byte, if the tablet
> + * supports a second dial at all.
> + */
> + unsigned int bitmap_second_dial_destination_byte;
> };
>
> /*
> diff --git a/drivers/hid/hid-uclogic-rdesc.c b/drivers/hid/hid-uclogic-rdesc.c
> index fb40775f5f5b..86293ae8c995 100644
> --- a/drivers/hid/hid-uclogic-rdesc.c
> +++ b/drivers/hid/hid-uclogic-rdesc.c
> @@ -859,6 +859,12 @@ const __u8 uclogic_rdesc_v2_frame_dial_arr[] = {
> const size_t uclogic_rdesc_v2_frame_dial_size =
> sizeof(uclogic_rdesc_v2_frame_dial_arr);
>
> +const __u8 uclogic_ugee_v2_probe_arr[] = {
> + 0x02, 0xb0, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
> +};
> +const size_t uclogic_ugee_v2_probe_size = sizeof(uclogic_ugee_v2_probe_arr);
> +const int uclogic_ugee_v2_probe_endpoint = 0x03;
> +
> /* Fixed report descriptor template for UGEE v2 pen reports */
> const __u8 uclogic_rdesc_ugee_v2_pen_template_arr[] = {
> 0x05, 0x0d, /* Usage Page (Digitizers), */
> @@ -1185,6 +1191,50 @@ const __u8 uclogic_rdesc_xppen_deco01_frame_arr[] = {
> const size_t uclogic_rdesc_xppen_deco01_frame_size =
> sizeof(uclogic_rdesc_xppen_deco01_frame_arr);
>
> +/* Fixed report descriptor for XP-Pen Arist 22R Pro frame */
> +const __u8 uclogic_rdesc_xppen_artist_22r_pro_frame_arr[] = {
User-space lacks support for dials, but, with this descriptor, would it
be possible to differenciate between the 2 dials to, for example,
assign them different actions? Or would them be exposed as the same
dial?
I have no idea how would user-space see this, but it'd interesting to
see how libinput handles it.
> + 0x05, 0x01, /* Usage Page (Desktop), */
> + 0x09, 0x07, /* Usage (Keypad), */
> + 0xA1, 0x01, /* Collection (Application), */
> + 0x85, UCLOGIC_RDESC_V1_FRAME_ID,
> + /* Report ID (Virtual report), */
> + 0x05, 0x0D, /* Usage Page (Digitizer), */
> + 0x09, 0x39, /* Usage (Tablet Function Keys), */
> + 0xA0, /* Collection (Physical), */
> + 0x14, /* Logical Minimum (0), */
> + 0x25, 0x01, /* Logical Maximum (1), */
> + 0x75, 0x01, /* Report Size (1), */
> + 0x95, 0x08, /* Report Count (8), */
> + 0x81, 0x01, /* Input (Constant), */
> + 0x05, 0x09, /* Usage Page (Button), */
> + 0x19, 0x01, /* Usage Minimum (01h), */
> + 0x29, 0x14, /* Usage Maximum (14h), */
> + 0x95, 0x14, /* Report Count (20), */
> + 0x81, 0x02, /* Input (Variable), */
> + 0x95, 0x14, /* Report Count (20), */
> + 0x81, 0x01, /* Input (Constant), */
> + 0x05, 0x01, /* Usage Page (Desktop), */
> + 0x09, 0x38, /* Usage (Wheel), */
> + 0x75, 0x08, /* Report Size (8), */
> + 0x95, 0x01, /* Report Count (1), */
> + 0x15, 0xFF, /* Logical Minimum (-1), */
> + 0x25, 0x08, /* Logical Maximum (8), */
> + 0x81, 0x06, /* Input (Variable, Relative), */
> + 0x05, 0x0C, /* Usage Page (Consumer Devices), */
> + 0x0A, 0x38, 0x02, /* Usage (AC PAN), */
> + 0x95, 0x01, /* Report Count (1), */
> + 0x81, 0x06, /* Input (Variable, Relative), */
> + 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
> + 0x75, 0x08, /* Report Size (8), */
> + 0x95, 0x01, /* Report Count (1), */
> + 0x81, 0x02, /* Input (Variable), */
> + 0xC0, /* End Collection */
> + 0xC0, /* End Collection */
> +};
> +
> +const size_t uclogic_rdesc_xppen_artist_22r_pro_frame_size =
> + sizeof(uclogic_rdesc_xppen_artist_22r_pro_frame_arr);
> +
> /**
> * uclogic_rdesc_template_apply() - apply report descriptor parameters to a
> * report descriptor template, creating a report descriptor. Copies the
> diff --git a/drivers/hid/hid-uclogic-rdesc.h b/drivers/hid/hid-uclogic-rdesc.h
> index a1f78c07293f..c3cb2c75dda5 100644
> --- a/drivers/hid/hid-uclogic-rdesc.h
> +++ b/drivers/hid/hid-uclogic-rdesc.h
> @@ -164,6 +164,11 @@ extern const size_t uclogic_rdesc_v2_frame_dial_size;
> /* Report ID for tweaked UGEE v2 battery reports */
> #define UCLOGIC_RDESC_UGEE_V2_BATTERY_ID 0xba
>
> +/* Magic data expected by UGEEv2 devices on probe */
> +extern const __u8 uclogic_ugee_v2_probe_arr[];
> +extern const size_t uclogic_ugee_v2_probe_size;
> +extern const int uclogic_ugee_v2_probe_endpoint;
> +
You can cherry-pick my patch refactoring this variables and send it as
part of your series. I think that it might help maintainers with the
merge and it'd also fix the problem reported by the test robot.
> /* Fixed report descriptor template for UGEE v2 pen reports */
> extern const __u8 uclogic_rdesc_ugee_v2_pen_template_arr[];
> extern const size_t uclogic_rdesc_ugee_v2_pen_template_size;
> @@ -205,4 +210,8 @@ extern const size_t uclogic_rdesc_ugee_g5_frame_size;
> /* Least-significant bit of Ugee G5 frame rotary encoder state */
> #define UCLOGIC_RDESC_UGEE_G5_FRAME_RE_LSB 38
>
> +/* Fixed report descriptor for XP-Pen Arist 22R Pro frame */
> +extern const __u8 uclogic_rdesc_xppen_artist_22r_pro_frame_arr[];
> +extern const size_t uclogic_rdesc_xppen_artist_22r_pro_frame_size;
> +
> #endif /* _HID_UCLOGIC_RDESC_H */
>
> base-commit: 88603b6dc419445847923fcb7fe5080067a30f98
> --
> 2.38.2
>
Powered by blists - more mailing lists