lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y7cdMyxap2hdPTec@shell.armlinux.org.uk>
Date:   Thu, 5 Jan 2023 18:55:47 +0000
From:   "Russell King (Oracle)" <linux@...linux.org.uk>
To:     Vladimir Oltean <olteanv@...il.com>
Cc:     Sean Anderson <sean.anderson@...o.com>,
        Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>, netdev@...r.kernel.org,
        "David S . Miller" <davem@...emloft.net>,
        Paolo Abeni <pabeni@...hat.com>, linux-kernel@...r.kernel.org,
        Jakub Kicinski <kuba@...nel.org>,
        Eric Dumazet <edumazet@...gle.com>,
        Tim Harvey <tharvey@...eworks.com>
Subject: Re: [PATCH net-next v5 4/4] phy: aquantia: Determine rate adaptation
 support from registers

On Thu, Jan 05, 2023 at 07:52:06PM +0200, Vladimir Oltean wrote:
> On Thu, Jan 05, 2023 at 12:43:47PM -0500, Sean Anderson wrote:
> > Again, this is to comply with the existing API assumptions. The current
> > code is buggy. Of course, another way around this is to modify the API.
> > I have chosen this route because I don't have a situation like you
> > described. But if support for that is important to you, I encourage you
> > to refactor things.
> 
> I don't think I'm aware of a practical situation like that either.
> I remember seeing some S32G boards with Aquantia PHYs which use 2500BASE-X
> for 2.5G and SGMII for <=1G, but that's about it in terms of protocol switching.

88x3310 can dynamically switch between 10GBASE-R, 5GBASE-R, 2500BASE-X
and SGMII if rate adaption is not being used (and the rate adaption
method it supports in non-MACSEC PHYs is only via increasing the IPG on
the MAC... which currently no MAC driver supports.)

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ