| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <fcd88dd6-4538-cb35-a4e8-750bef1a6c08@intel.com>
Date: Thu, 5 Jan 2023 23:27:53 +0200
From: Adrian Hunter <adrian.hunter@...el.com>
To: Victor Shih <victorshihgli@...il.com>, ulf.hansson@...aro.org
Cc: linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
benchuanggli@...il.com, HL.Liu@...esyslogic.com.tw,
Greg.tu@...esyslogic.com.tw, takahiro.akashi@...aro.org,
dlunev@...omium.org, Victor Shih <victor.shih@...esyslogic.com.tw>,
Ben Chuang <ben.chuang@...esyslogic.com.tw>
Subject: Re: [PATCH V6 14/24] mmc: sdhci-uhs2: add set_ios()
On 13/12/22 11:00, Victor Shih wrote:
> This is a sdhci version of mmc's set_ios operation.
> It covers both UHS-I and UHS-II.
>
> Signed-off-by: Ben Chuang <ben.chuang@...esyslogic.com.tw>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@...aro.org>
> Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
> ---
> drivers/mmc/host/sdhci-uhs2.c | 96 +++++++++++++++++++++++++++++++++++
> drivers/mmc/host/sdhci-uhs2.h | 1 +
> drivers/mmc/host/sdhci.c | 53 +++++++++++--------
> drivers/mmc/host/sdhci.h | 2 +
> 4 files changed, 131 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> index 00b1b69b49ea..3d52d35a91a5 100644
> --- a/drivers/mmc/host/sdhci-uhs2.c
> +++ b/drivers/mmc/host/sdhci-uhs2.c
> @@ -213,6 +213,68 @@ void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
> }
> EXPORT_SYMBOL_GPL(sdhci_uhs2_set_timeout);
>
> +/**
> + * sdhci_uhs2_clear_set_irqs - set Error Interrupt Status Enable register
> + * @host: SDHCI host
> + * @clear: bit-wise clear mask
> + * @set: bit-wise set mask
> + *
> + * Set/unset bits in UHS-II Error Interrupt Status Enable register
> + */
> +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
> +{
> + u32 ier;
> +
> + ier = sdhci_readl(host, SDHCI_UHS2_INT_STATUS_ENABLE);
> + ier &= ~clear;
> + ier |= set;
> + sdhci_writel(host, ier, SDHCI_UHS2_INT_STATUS_ENABLE);
> + sdhci_writel(host, ier, SDHCI_UHS2_INT_SIGNAL_ENABLE);
> +}
> +EXPORT_SYMBOL_GPL(sdhci_uhs2_clear_set_irqs);
> +
> +static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + u8 cmd_res, dead_lock;
> + u16 ctrl_2;
> +
> + /* UHS2 Timeout Control */
> + sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock);
> +
> + /* change to use calculate value */
> + cmd_res |= FIELD_PREP(SDHCI_UHS2_TIMER_CTRL_DEADLOCK_MASK, dead_lock);
> +
> + sdhci_uhs2_clear_set_irqs(host,
> + SDHCI_UHS2_INT_CMD_TIMEOUT |
> + SDHCI_UHS2_INT_DEADLOCK_TIMEOUT,
> + 0);
> + sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL);
> + sdhci_uhs2_clear_set_irqs(host, 0,
> + SDHCI_UHS2_INT_CMD_TIMEOUT |
> + SDHCI_UHS2_INT_DEADLOCK_TIMEOUT);
> +
> + /* UHS2 timing */
Please extend comment to include:
Note, UHS2 timing is disabled when powering off
> + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> + if (ios->timing == MMC_TIMING_SD_UHS2)
> + ctrl_2 |= SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE;
> + else
> + ctrl_2 &= ~(SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE);
> + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
> +
> + if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
> + sdhci_enable_preset_value(host, true);
> +
> + if (host->ops->set_power)
> + host->ops->set_power(host, ios->power_mode, ios->vdd);
> + else
> + sdhci_uhs2_set_power(host, ios->power_mode, ios->vdd);
sdhci_set_ios_common() already set the power. Are both needed?
> + udelay(100);
Please add a comment for why this delay is here.
> +
> + host->timing = ios->timing;
Please move this up to where the timing change is.
> + sdhci_set_clock(host, host->clock);
> +}
> +
> /*****************************************************************************\
> * *
> * MMC callbacks *
> @@ -234,6 +296,39 @@ static int sdhci_uhs2_start_signal_voltage_switch(struct mmc_host *mmc,
> return sdhci_start_signal_voltage_switch(mmc, ios);
> }
>
> +int sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
Should be static
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> +
> + if (!(host->version >= SDHCI_SPEC_400) ||
> + !(host->mmc->flags & MMC_UHS2_SUPPORT &&
> + host->mmc->caps2 & MMC_CAP2_SD_UHS2)) {
This can be just:
if (!sdhci_uhs2_mode(host)) {
Not sure if this is actually possible?
> + sdhci_set_ios(mmc, ios);
> + return 0;
> + }
> +
> + if (ios->power_mode == MMC_POWER_UNDEFINED)
> + return 0;
> +
> + if (host->flags & SDHCI_DEVICE_DEAD) {
> + if (!IS_ERR(mmc->supply.vmmc) &&
> + ios->power_mode == MMC_POWER_OFF)
> + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> + if (!IS_ERR_OR_NULL(mmc->supply.vmmc2) &&
> + ios->power_mode == MMC_POWER_OFF)
> + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2, 0);
This can be just:
if (ios->power_mode == MMC_POWER_OFF) {
mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc2, 0);
}
> + return -1;
> + }
> +
> + host->timing = ios->timing;
__sdhci_uhs2_set_ios() does this so it is not needed here.
> +
> + sdhci_set_ios_common(mmc, ios);
> +
> + __sdhci_uhs2_set_ios(mmc, ios);
> +
> + return 0;
> +}
> +
> /*****************************************************************************\
> * *
> * Driver init/exit *
> @@ -244,6 +339,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
> {
> host->mmc_host_ops.start_signal_voltage_switch =
> sdhci_uhs2_start_signal_voltage_switch;
> + host->mmc_host_ops.uhs2_set_ios = sdhci_uhs2_set_ios;
>
> return 0;
> }
> diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
> index a58ef19c08aa..184fee80253c 100644
> --- a/drivers/mmc/host/sdhci-uhs2.h
> +++ b/drivers/mmc/host/sdhci-uhs2.h
> @@ -178,5 +178,6 @@ void sdhci_uhs2_dump_regs(struct sdhci_host *host);
> bool sdhci_uhs2_mode(struct sdhci_host *host);
> void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask);
> void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd);
> +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set);
>
> #endif /* __SDHCI_UHS2_H */
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 99633a3ef549..49bbdc155b2b 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -47,8 +47,6 @@
> static unsigned int debug_quirks = 0;
> static unsigned int debug_quirks2;
>
> -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
> -
> static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd);
>
> void sdhci_dumpregs(struct sdhci_host *host)
> @@ -1877,6 +1875,9 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host)
> case MMC_TIMING_MMC_HS400:
> preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400);
> break;
> + case MMC_TIMING_SD_UHS2:
> + preset = sdhci_readw(host, SDHCI_PRESET_FOR_UHS2);
> + break;
> default:
> pr_warn("%s: Invalid UHS-I mode selected\n",
> mmc_hostname(host->mmc));
> @@ -2325,24 +2326,9 @@ static bool sdhci_presetable_values_change(struct sdhci_host *host, struct mmc_i
> (sdhci_preset_needed(host, ios->timing) || host->drv_type != ios->drv_type);
> }
>
> -void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios)
> {
> struct sdhci_host *host = mmc_priv(mmc);
> - bool reinit_uhs = host->reinit_uhs;
> - bool turning_on_clk = false;
> - u8 ctrl;
> -
> - host->reinit_uhs = false;
> -
> - if (ios->power_mode == MMC_POWER_UNDEFINED)
> - return;
> -
> - if (host->flags & SDHCI_DEVICE_DEAD) {
> - if (!IS_ERR(mmc->supply.vmmc) &&
> - ios->power_mode == MMC_POWER_OFF)
> - mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> - return;
> - }
>
> /*
> * Reset the chip on each power off.
> @@ -2359,8 +2345,6 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> sdhci_enable_preset_value(host, false);
>
> if (!ios->clock || ios->clock != host->clock) {
> - turning_on_clk = ios->clock && !host->clock;
> -
> host->ops->set_clock(host, ios->clock);
> host->clock = ios->clock;
>
> @@ -2381,6 +2365,32 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> host->ops->set_power(host, ios->power_mode, ios->vdd);
> else
> sdhci_set_power(host, ios->power_mode, ios->vdd);
> +}
> +EXPORT_SYMBOL_GPL(sdhci_set_ios_common);
> +
> +void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + bool reinit_uhs = host->reinit_uhs;
> + bool turning_on_clk = false;
> + u8 ctrl;
> +
> + host->reinit_uhs = false;
> +
> + if (ios->power_mode == MMC_POWER_UNDEFINED)
> + return;
> +
> + if (host->flags & SDHCI_DEVICE_DEAD) {
> + if (!IS_ERR(mmc->supply.vmmc) &&
> + ios->power_mode == MMC_POWER_OFF)
> + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> + return;
> + }
> +
> + sdhci_set_ios_common(mmc, ios);
> +
> + if (!ios->clock || ios->clock != host->clock)
> + turning_on_clk = ios->clock && !host->clock;
>
> if (host->ops->platform_send_init_74_clocks)
> host->ops->platform_send_init_74_clocks(host, ios->power_mode);
> @@ -2959,7 +2969,7 @@ int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
> }
> EXPORT_SYMBOL_GPL(sdhci_execute_tuning);
>
> -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
> +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
> {
> /* Host Controller v3.00 defines preset value registers */
> if (host->version < SDHCI_SPEC_300)
> @@ -2987,6 +2997,7 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
> host->preset_enabled = enable;
> }
> }
> +EXPORT_SYMBOL_GPL(sdhci_enable_preset_value);
>
> static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
> int err)
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index df7fa0c0ebf8..c2f989dc2361 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -850,6 +850,8 @@ void sdhci_set_bus_width(struct sdhci_host *host, int width);
> void sdhci_reset(struct sdhci_host *host, u8 mask);
> void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
> int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
> +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
> +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios);
> void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
> int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
> struct mmc_ios *ios);
Powered by blists - more mailing lists