| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230105132457.4125372-7-treapking@chromium.org>
Date: Thu, 5 Jan 2023 21:24:54 +0800
From: Pin-yen Lin <treapking@...omium.org>
To: Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Robert Foss <robert.foss@...aro.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Daniel Scally <djrscally@...il.com>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Rafael J . Wysocki" <rafael@...nel.org>,
Prashant Malani <pmalani@...omium.org>,
Benson Leung <bleung@...omium.org>,
Guenter Roeck <groeck@...omium.org>
Cc: Nícolas F . R . A . Prado
<nfraprado@...labora.com>, Xin Ji <xji@...logixsemi.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Thomas Zimmermann <tzimmermann@...e.de>,
Hsin-Yi Wang <hsinyi@...omium.org>,
linux-kernel@...r.kernel.org, Allen Chen <allen.chen@....com.tw>,
linux-acpi@...r.kernel.org, Lyude Paul <lyude@...hat.com>,
dri-devel@...ts.freedesktop.org, chrome-platform@...ts.linux.dev,
Pin-yen Lin <treapking@...omium.org>,
Javier Martinez Canillas <javierm@...hat.com>,
Marek Vasut <marex@...x.de>, devicetree@...r.kernel.org,
Stephen Boyd <swboyd@...omium.org>
Subject: [PATCH v7 6/9] drm/bridge: anx7625: Register Type C mode switches
Register USB Type-C mode switches when the "mode-switch" property and
relevant port are available in Device Tree. Configure the crosspoint
switch based on the entered alternate mode for a specific Type-C
connector.
Signed-off-by: Pin-yen Lin <treapking@...omium.org>
---
Changes in v7:
- Fixed style issues in anx7625 driver
- Removed DT property validation in anx7625 driver.
- Extracted common codes to another commit.
Changes in v6:
- Squashed to a single patch
drivers/gpu/drm/bridge/analogix/Kconfig | 1 +
drivers/gpu/drm/bridge/analogix/anx7625.c | 88 +++++++++++++++++++++++
drivers/gpu/drm/bridge/analogix/anx7625.h | 13 ++++
3 files changed, 102 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/Kconfig b/drivers/gpu/drm/bridge/analogix/Kconfig
index 173dada218ec..992b43ed1dd7 100644
--- a/drivers/gpu/drm/bridge/analogix/Kconfig
+++ b/drivers/gpu/drm/bridge/analogix/Kconfig
@@ -34,6 +34,7 @@ config DRM_ANALOGIX_ANX7625
tristate "Analogix Anx7625 MIPI to DP interface support"
depends on DRM
depends on OF
+ depends on TYPEC || TYPEC=n
select DRM_DISPLAY_DP_HELPER
select DRM_DISPLAY_HDCP_HELPER
select DRM_DISPLAY_HELPER
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 1cf242130b91..2bb504a8d789 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -15,6 +15,8 @@
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/types.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
#include <linux/workqueue.h>
#include <linux/of_gpio.h>
@@ -2572,6 +2574,86 @@ static void anx7625_runtime_disable(void *data)
pm_runtime_disable(data);
}
+static void anx7625_set_crosspoint_switch(struct anx7625_data *ctx,
+ enum typec_orientation orientation)
+{
+ if (orientation == TYPEC_ORIENTATION_NORMAL) {
+ anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
+ SW_SEL1_SSRX_RX1 | SW_SEL1_DPTX0_RX2);
+ anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
+ SW_SEL2_SSTX_TX1 | SW_SEL2_DPTX1_TX2);
+ } else if (orientation == TYPEC_ORIENTATION_REVERSE) {
+ anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
+ SW_SEL1_SSRX_RX2 | SW_SEL1_DPTX0_RX1);
+ anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
+ SW_SEL2_SSTX_TX2 | SW_SEL2_DPTX1_TX1);
+ }
+}
+
+static void anx7625_typec_two_ports_update(struct anx7625_data *ctx)
+{
+ struct drm_dp_typec_switch_desc switch_desc = ctx->switch_desc;
+ /* Check if both ports available and do nothing to retain the current one */
+ if (switch_desc.typec_ports[0].dp_connected && switch_desc.typec_ports[1].dp_connected)
+ return;
+
+ if (switch_desc.typec_ports[0].dp_connected)
+ anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_NORMAL);
+ else if (switch_desc.typec_ports[1].dp_connected)
+ anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_REVERSE);
+}
+
+static int anx7625_typec_mux_set(struct typec_mux_dev *mux,
+ struct typec_mux_state *state)
+{
+ struct drm_dp_typec_port_data *port_data = typec_mux_get_drvdata(mux);
+ struct anx7625_data *ctx = (struct anx7625_data *) port_data->data;
+ struct device *dev = &ctx->client->dev;
+ struct drm_dp_typec_switch_desc switch_desc = ctx->switch_desc;
+ bool new_dp_connected, old_dp_connected;
+
+ if (switch_desc.num_typec_switches == 1)
+ return 0;
+
+ old_dp_connected = switch_desc.typec_ports[0].dp_connected ||
+ switch_desc.typec_ports[1].dp_connected;
+
+ port_data->dp_connected = state->alt &&
+ state->alt->svid == USB_TYPEC_DP_SID &&
+ state->alt->mode == USB_TYPEC_DP_MODE;
+
+ dev_dbg(dev, "mux_set dp_connected: c0=%d, c1=%d\n",
+ switch_desc.typec_ports[0].dp_connected, switch_desc.typec_ports[1].dp_connected);
+
+ new_dp_connected = switch_desc.typec_ports[0].dp_connected ||
+ switch_desc.typec_ports[1].dp_connected;
+
+ /* dp on, power on first */
+ if (!old_dp_connected && new_dp_connected)
+ pm_runtime_get_sync(dev);
+
+ anx7625_typec_two_ports_update(ctx);
+
+ /* dp off, power off last */
+ if (old_dp_connected && !new_dp_connected)
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+
+static void anx7625_unregister_typec_switches(struct anx7625_data *ctx)
+{
+ drm_dp_unregister_typec_switches(&ctx->switch_desc);
+}
+
+static int anx7625_register_typec_switches(struct device *dev, struct anx7625_data *ctx)
+{
+ struct device_node *port = of_graph_get_port_by_id(dev->of_node, 1);
+
+ return drm_dp_register_typec_switches(dev, port, &ctx->switch_desc,
+ ctx, anx7625_typec_mux_set);
+}
+
static int anx7625_i2c_probe(struct i2c_client *client)
{
struct anx7625_data *platform;
@@ -2679,6 +2761,10 @@ static int anx7625_i2c_probe(struct i2c_client *client)
if (platform->pdata.intp_irq)
queue_work(platform->workqueue, &platform->work);
+ ret = anx7625_register_typec_switches(dev, platform);
+ if (ret && ret != -ENODEV)
+ dev_warn(dev, "Didn't register Type-C switches, err: %d\n", ret);
+
platform->bridge.funcs = &anx7625_bridge_funcs;
platform->bridge.of_node = client->dev.of_node;
if (!anx7625_of_panel_on_aux_bus(&client->dev))
@@ -2730,6 +2816,8 @@ static void anx7625_i2c_remove(struct i2c_client *client)
drm_bridge_remove(&platform->bridge);
+ anx7625_unregister_typec_switches(platform);
+
if (platform->pdata.intp_irq)
destroy_workqueue(platform->workqueue);
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
index 14f33d6be289..38abbd3d6b36 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.h
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
@@ -55,6 +55,18 @@
#define HPD_STATUS_CHANGE 0x80
#define HPD_STATUS 0x80
+#define TCPC_SWITCH_0 0xB4
+#define SW_SEL1_DPTX0_RX2 BIT(0)
+#define SW_SEL1_DPTX0_RX1 BIT(1)
+#define SW_SEL1_SSRX_RX2 BIT(4)
+#define SW_SEL1_SSRX_RX1 BIT(5)
+
+#define TCPC_SWITCH_1 0xB5
+#define SW_SEL2_DPTX1_TX2 BIT(0)
+#define SW_SEL2_DPTX1_TX1 BIT(1)
+#define SW_SEL2_SSTX_TX2 BIT(4)
+#define SW_SEL2_SSTX_TX1 BIT(5)
+
/******** END of I2C Address 0x58 ********/
/***************************************************************/
@@ -479,6 +491,7 @@ struct anx7625_data {
struct drm_connector *connector;
struct mipi_dsi_device *dsi;
struct drm_dp_aux aux;
+ struct drm_dp_typec_switch_desc switch_desc;
};
#endif /* __ANX7625_H__ */
--
2.39.0.314.g84b9a713c41-goog
Powered by blists - more mailing lists