[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <202301061647338189934@zte.com.cn>
Date: Fri, 6 Jan 2023 16:47:33 +0800 (CST)
From: <guo.ziliang@....com.cn>
To: <bhelgaas@...gle.com>
Cc: <linux-pci@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<chen.lin5@....com.cn>, <guo.ziliang@....com.cn>
Subject: [PATCH] PCI: of: Warn if bridge base/limit region overlaps with system ram region
From: Chen Lin <chen.lin5@....com.cn>
bridge base/limit(memory behind in lspci info, outbound pcie address/size)
region is used to route outbound mem read/write transaction to ep. This
base/limit region also may filter out inbound transactions which will
result in inbound(eg: dma) transaction fail.
For example, if bridge base/limit is [0x20000000, 0x203fffff], system ram
is [0x20000000, 0x27ffffff]. The inbound mapping is usually 1:1 equal
mapping. When allocated system ram for inbound tansaction is 0x20004000
(any in bridge base/limit), this inbound transactions will be filter out.
AER may report 'UnsupReq' on inbound mem read/write transactions if address
is in this base/limit region, but not all pcie AER enabled or work well. We
warn it also in host bridge pci address detection phase.
Signed-off-by: Chen Lin <chen.lin5@....com.cn>
---
drivers/pci/of.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index 196834ed44fe..82e09af6c638 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -314,6 +314,8 @@ static int devm_of_pci_get_host_bridge_resources(struct device *dev,
dev_dbg(dev, "Parsing ranges property...\n");
for_each_of_pci_range(&parser, &range) {
+ int is_ram;
+
/* Read next ranges element */
if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO)
range_type = "IO";
@@ -332,6 +334,18 @@ static int devm_of_pci_get_host_bridge_resources(struct device *dev,
if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
continue;
+ /*
+ * bridge base/limit(memory behind) region may filter out inbound
+ * transactions which will result in inbound(eg:dma) fail of ep.
+ * AER may report it if enabled, we warn it also.
+ */
+ is_ram = region_intersects(range.pci_addr, range.size,
+ IORESOURCE_SYSTEM_RAM, IORES_DESC_NONE);
+ if (is_ram == REGION_INTERSECTS) {
+ dev_warn(dev, "%#012llx..%#012llx bridge base/limit region overlaps with system ram, may result in inbound fail\n",
+ range.pci_addr, range.pci_addr + range.size - 1);
+ }
+
err = of_pci_range_to_resource(&range, dev_node, &tmp_res);
if (err)
continue;
--
2.15.2
Powered by blists - more mailing lists