| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 7 Jan 2023 11:36:12 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Nikita Travkin <nikita@...n.ru>, Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Siddharth Manthan <siddharth.manthan@...il.com>,
Jasper Korten <jja2000@...il.com>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht
Subject: Re: [PATCH v2 2/3] arm64: dts: qcom: Add device tree for Samsung
Galaxy Tab A 9.7 (2015)
On 6.01.2023 13:25, Nikita Travkin wrote:
> From: Jasper Korten <jja2000@...il.com>
>
> The Galaxy Tab A 9.7 (2015) is a Snapdragon 410 based tablet.
>
> This commit introduces basic support for the tablet including the
> following features:
> - SDHCI (internal and external storage)
> - USB Device Mode
> - UART
> - Regulators
> - WCNSS (WiFi/BT)
> - GPIO keys
> - Fuel gauge
> - Touchscreen
> - Accelerometer
>
> Part of the DT is split out into a common dtsi since the tablet shares
> majority of the design with another variant having a different screen
> size.
>
> Signed-off-by: Jasper Korten <jja2000@...il.com>
> Co-developed-by: Siddharth Manthan <siddharth.manthan@...il.com>
> Signed-off-by: Siddharth Manthan <siddharth.manthan@...il.com>
> Co-developed-by: Nikita Travkin <nikita@...n.ru>
> Signed-off-by: Nikita Travkin <nikita@...n.ru>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../dts/qcom/msm8916-samsung-gt5-common.dtsi | 300 ++++++++++++++++++
> .../boot/dts/qcom/msm8916-samsung-gt510.dts | 116 +++++++
> 3 files changed, 417 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index b42362c7be1b..70e3b109aeff 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e5.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e7.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandmax.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-gt510.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
> new file mode 100644
> index 000000000000..bb1b1e814d8a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
> @@ -0,0 +1,300 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/dts-v1/;
> +
> +#include "msm8916-pm8916.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + aliases {
> + serial0 = &blsp1_uart2;
> + };
> +
> + chosen {
> + stdout-path = "serial0";
> + };
> +
> + reserved-memory {
> + /* Additional memory used by Samsung firmware modifications */
> + tz-apps@...00000 {
> + reg = <0x0 0x85500000 0x0 0xb00000>;
> + no-map;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + pinctrl-0 = <&gpio_keys_default>;
> + pinctrl-names = "default";
> +
> + label = "GPIO Buttons";
> +
> + volume-up-button {
> + label = "Volume Up";
> + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + };
> +
> + home-button {
> + label = "Home";
> + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_HOMEPAGE>;
> + };
> + };
> +
> + gpio-hall-sensor {
> + compatible = "gpio-keys";
> +
> + pinctrl-0 = <&gpio_hall_sensor_default>;
> + pinctrl-names = "default";
> +
> + label = "GPIO Hall Effect Sensor";
> +
> + hall-sensor-switch {
> + label = "Hall Effect Sensor";
> + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
> + linux,input-type = <EV_SW>;
> + linux,code = <SW_LID>;
> + linux,can-disable;
> + };
> + };
> +};
> +
> +&blsp_i2c4 {
> + status = "okay";
> +
> + fuelgauge@36 {
> + compatible = "maxim,max77849-battery";
> + reg = <0x36>;
> +
> + maxim,rsns-microohm = <10000>;
> + maxim,over-heat-temp = <600>;
> + maxim,over-volt = <4400>;
> +
> + interrupt-parent = <&msmgpio>;
> + interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
> +
> + pinctrl-0 = <&fuelgauge_int_default>;
> + pinctrl-names = "default";
> + };
> +};
> +
> +&blsp_i2c2 {
> + status = "okay";
> +
> + accelerometer@1d {
> + compatible = "st,lis2hh12";
> + reg = <0x1d>;
> +
> + vdd-supply = <&pm8916_l17>;
> + vddio-supply = <&pm8916_l5>;
> +
> + interrupt-parent = <&msmgpio>;
> + interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "INT1";
> +
> + st,drdy-int-pin = <1>;
> + mount-matrix = "0", "1", "0",
> + "-1", "0", "0",
> + "0", "0", "1";
> +
> + pinctrl-0 = <&accel_int_default>;
> + pinctrl-names = "default";
> + };
> +
> + light-sensor@10 {
> + compatible = "capella,cm3323";
> + reg = <0x10>;
> + };
The node at 0x10 should come before the node at 0x1d.
> +};
> +
> +&blsp1_uart2 {
> + status = "okay";
> +};
> +
> +&pm8916_resin {
> + linux,code = <KEY_VOLUMEDOWN>;
> + status = "okay";
> +};
> +
> +/* FIXME: Replace with MAX77849 MUIC when driver is available */
> +&pm8916_usbin {
> + status = "okay";
> +};
> +
> +&pronto {
> + status = "okay";
> +
> + iris {
> + compatible = "qcom,wcn3660b";
> + };
> +};
> +
> +&sdhc_1 {
> + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
> + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> + pinctrl-names = "default", "sleep";
> +
> + status = "okay";
> +};
> +
> +&sdhc_2 {
> + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> + pinctrl-names = "default", "sleep";
> +
> + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
> +
> + status = "okay";
> +};
> +
> +&usb {
> + dr_mode = "peripheral";
> + extcon = <&pm8916_usbin>;
> +
> + status = "okay";
> +};
> +
> +&usb_hs_phy {
> + extcon = <&pm8916_usbin>;
> +};
> +
> +&smd_rpm_regulators {
> + vdd_l1_l2_l3-supply = <&pm8916_s3>;
> + vdd_l4_l5_l6-supply = <&pm8916_s4>;
> + vdd_l7-supply = <&pm8916_s4>;
> +
> + s3 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1300000>;
> + };
> +
> + s4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2100000>;
> + };
> +
> + l1 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + l2 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + l4 {
> + regulator-min-microvolt = <2050000>;
> + regulator-max-microvolt = <2050000>;
> + };
> +
> + l5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l8 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2900000>;
> + };
> +
> + l9 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l10 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + l11 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + regulator-allow-set-load;
> + regulator-system-load = <200000>;
Please reorder the last two properties.
> + };
> +
> + l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + l13 {
> + regulator-min-microvolt = <3075000>;
> + regulator-max-microvolt = <3075000>;
> + };
> +
> + l14 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l15 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l16 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l17 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + l18 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> + };
> +};
> +
> +&msmgpio {
> + accel_int_default: accel-int-default-state {
> + pins = "gpio115";
> + function = "gpio";
> +
Stray newlines, please remove.
Konrad
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + fuelgauge_int_default: fuelgauge-int-default-state {
> + pins = "gpio121";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + gpio_keys_default: gpio-keys-default-state {
> + pins = "gpio107", "gpio109";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + gpio_hall_sensor_default: gpio-hall-sensor-default-state {
> + pins = "gpio52";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
> new file mode 100644
> index 000000000000..6331166d9067
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
> @@ -0,0 +1,116 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/dts-v1/;
> +
> +#include "msm8916-samsung-gt5-common.dtsi"
> +
> +/ {
> + model = "Samsung Galaxy Tab A 9.7 (2015)";
> + compatible = "samsung,gt510", "qcom,msm8916";
> + chassis-type = "tablet";
> +
> + clk_pwm: pwm {
> + compatible = "clk-pwm";
> + #pwm-cells = <2>;
> +
> + clocks = <&gcc GCC_GP2_CLK>;
> +
> + pinctrl-0 = <&motor_pwm_default>;
> + pinctrl-names = "default";
> + };
> +
> + reg_motor_vdd: regulator-motor-vdd {
> + compatible = "regulator-fixed";
> + regulator-name = "motor_vdd";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> +
> + gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-0 = <&motor_en_default>;
> + pinctrl-names = "default";
> + };
> +
> + reg_tsp_1p8v: regulator-tsp-1p8v {
> + compatible = "regulator-fixed";
> + regulator-name = "tsp_1p8v";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-0 = <&tsp_en_default>;
> + pinctrl-names = "default";
> + };
> +
> + reg_tsp_3p3v: regulator-tsp-3p3v {
> + compatible = "regulator-fixed";
> + regulator-name = "tsp_3p3v";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + vibrator {
> + compatible = "pwm-vibrator";
> +
> + pwms = <&clk_pwm 0 100000>;
> + pwm-names = "enable";
> +
> + vcc-supply = <®_motor_vdd>;
> + };
> +};
> +
> +&blsp_i2c5 {
> + status = "okay";
> +
> + touchscreen@4a {
> + compatible = "atmel,maxtouch";
> + reg = <0x4a>;
> + interrupt-parent = <&msmgpio>;
> + interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
> +
> + vdd-supply = <®_tsp_1p8v>;
> + vdda-supply = <®_tsp_3p3v>;
> +
> + reset-gpios = <&msmgpio 114 GPIO_ACTIVE_LOW>;
> +
> + pinctrl-0 = <&tsp_int_rst_default>;
> + pinctrl-names = "default";
> + };
> +};
> +
> +&msmgpio {
> + motor_en_default: motor-en-default-state {
> + pins = "gpio76";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + motor_pwm_default: motor-pwm-default-state {
> + pins = "gpio50";
> + function = "gcc_gp2_clk_a";
> + };
> +
> + tsp_en_default: tsp-en-default-state {
> + pins = "gpio73";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + tsp_int_rst_default: tsp-int-rst-default-state {
> + pins = "gpio13", "gpio114";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +};
Powered by blists - more mailing lists