[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y7m0+MQggJrxfYju@lunn.ch>
Date: Sat, 7 Jan 2023 19:07:52 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Piergiorgio Beruto <piergiorgio.beruto@...il.com>
Cc: Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, Oleksij Rempel <o.rempel@...gutronix.de>,
mailhol.vincent@...adoo.fr, sudheer.mogilappagari@...el.com,
sbhatta@...vell.com, linux-doc@...r.kernel.org,
wangjie125@...wei.com, corbet@....net, lkp@...el.com,
gal@...dia.com, gustavoars@...nel.org
Subject: Re: [PATCH v2 net-next 4/5] drivers/net/phy: add helpers to get/set
PLCA configuration
> +/**
> + * genphy_c45_plca_set_cfg - set PLCA configuration using standard registers
> + * @phydev: target phy_device struct
> + * @plca_cfg: structure containing the PLCA configuration. Fields set to -1 are
> + * not to be changed.
> + *
> + * Description: if the PHY complies to the Open Alliance TC14 10BASE-T1S PLCA
> + * Management Registers specifications, this function can be used to modify
> + * the PLCA configuration using the standard registers in MMD 31.
> + */
> +int genphy_c45_plca_set_cfg(struct phy_device *phydev,
> + const struct phy_plca_cfg *plca_cfg)
> +{
> + int ret;
> + u16 val;
> +
> + // PLCA IDVER is read-only
> + if (plca_cfg->version >= 0)
> + return -EINVAL;
> +
> + // first of all, disable PLCA if required
> + if (plca_cfg->enabled == 0) {
> + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
> + MDIO_OATC14_PLCA_CTRL0,
> + MDIO_OATC14_PLCA_EN);
> +
> + if (ret < 0)
> + return ret;
> + }
> +
> + if (plca_cfg->node_cnt >= 0 || plca_cfg->node_id >= 0) {
> + if (plca_cfg->node_cnt < 0 || plca_cfg->node_id < 0) {
I think it would be good to add some comments since this code is not
immediately obvious to me. I had to think about it for a while.
> + if (plca_cfg->burst_cnt >= 0 || plca_cfg->burst_tmr >= 0) {
> + if (plca_cfg->burst_cnt < 0 || plca_cfg->burst_tmr < 0) {
> + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2,
> + MDIO_OATC14_PLCA_BURST);
> +
This follows the same patterns, so maybe comments here as well?
With that, you can add my Reviewed-by.
Andrew
Powered by blists - more mailing lists