[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <9ad41d2b-bbe9-fe55-3aba-6a1281b6aa1b@sberdevices.ru>
Date: Sun, 8 Jan 2023 20:35:18 +0000
From: Arseniy Krasnov <AVKrasnov@...rdevices.ru>
To: Stefano Garzarella <sgarzare@...hat.com>,
"David S. Miller" <davem@...emloft.net>,
"edumazet@...gle.com" <edumazet@...gle.com>,
"Paolo Abeni" <pabeni@...hat.com>, Jakub Kicinski <kuba@...nel.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"virtualization@...ts.linux-foundation.org"
<virtualization@...ts.linux-foundation.org>,
kernel <kernel@...rdevices.ru>,
Bobby Eshleman <bobby.eshleman@...edance.com>,
Krasnov Arseniy <oxffffaa@...il.com>,
Arseniy Krasnov <AVKrasnov@...rdevices.ru>
Subject: [PATCH net-next v6 0/4] vsock: update tools and error handling
Patchset consists of two parts:
1) Kernel patch
One patch from Bobby Eshleman. I took single patch from Bobby:
https://lore.kernel.org/lkml/d81818b868216c774613dd03641fcfe63cc55a45
.1660362668.git.bobby.eshleman@...edance.com/ and use only part for
af_vsock.c, as VMCI and Hyper-V parts were rejected.
I used it, because for SOCK_SEQPACKET big messages handling was broken -
ENOMEM was returned instead of EMSGSIZE. And anyway, current logic which
always replaces any error code returned by transport to ENOMEM looks
strange for me also(for example in EMSGSIZE case it was changed to
ENOMEM).
2) Tool patches
Since there is work on several significant updates for vsock(virtio/
vsock especially): skbuff, DGRAM, zerocopy rx/tx, so I think that this
patchset will be useful.
This patchset updates vsock tests and tools a little bit. First of all
it updates test suite: two new tests are added. One test is reworked
message bound test. Now it is more complex. Instead of sending 1 byte
messages with one MSG_EOR bit, it sends messages of random length(one
half of messages are smaller than page size, second half are bigger)
with random number of MSG_EOR bits set. Receiver also don't know total
number of messages. Message bounds control is maintained by hash sum
of messages length calculation. Second test is for SOCK_SEQPACKET - it
tries to send message with length more than allowed. I think both tests
will be useful for DGRAM support also.
Third thing that this patchset adds is small utility to test vsock
performance for both rx and tx. I think this util could be useful as
'iperf'/'uperf', because:
1) It is small comparing to 'iperf' or 'uperf', so it very easy to add
new mode or feature to it(especially vsock specific).
2) It allows to set SO_RCVLOWAT and SO_VM_SOCKETS_BUFFER_SIZE option.
Whole throughtput depends on both parameters.
3) It is located in the kernel source tree, so it could be updated by
the same patchset which changes related kernel functionality in vsock.
I used this util very often to check performance of my rx zerocopy
support(this tool has rx zerocopy support, but not in this patchset).
Here is comparison of outputs from three utils: 'iperf', 'uperf' and
'vsock_perf'. In all three cases sender was at guest side. rx and
tx buffers were always 64Kb(because by default 'uperf' uses 8K).
iperf:
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 12.8 GBytes 11.0 Gbits/sec sender
[ 5] 0.00-10.00 sec 12.8 GBytes 11.0 Gbits/sec receiver
uperf:
Total 16.27GB / 11.36(s) = 12.30Gb/s 23455op/s
vsock_perf:
tx performance: 12.301529 Gbits/s
rx performance: 12.288011 Gbits/s
Results are almost same in all three cases.
Patchset was rebased and tested on skbuff v9 patch from Bobby Eshleman:
https://lore.kernel.org/netdev/20230107002937.899605-1-bobby.eshleman@bytedance.com/
Changelog:
v5 -> v6:
- RFC -> net-next tag
- vsock_perf:
- forget to update README: Gb/s -> GBits/s
v4 -> v5:
- Kernel patch: update commit message
- vsock_perf:
- Fix typo in commit message
- Use "fprintf(stderr," instead of "printf(" for errors
- More stats for tx: total bytes sent and time in tx loop
- Print throughput in 'gigabits' instead of 'gigabytes'(as in
'iperf' and 'uperf')
- Output comparisons between 'iperf', 'uperf' and 'vsock_perf'
added to CV.
v3 -> v4:
- Kernel patch: update commit message by adding error case description
- Message bounds test:
- Typo fix: s/contols/controls
- Fix error output on 'setsockopt()'s
- vsock_perf:
- Add 'vsock_perf' target to 'all' in Makefile
- Fix error output on 'setsockopt()'s
- Swap sender/receiver roles: now sender does 'connect()' and sends
data, while receiver accepts connection.
- Update arguments names: s/mb/bytes, s/so_rcvlowat/rcvlowat
- Update usage output and description in README
v2 -> v3:
- Patches for VMCI and Hyper-V were removed from patchset(commented by
Vishnu Dasa and Dexuan Cui)
- In message bounds test hash is computed from data buffer with random
content(in v2 it was size only). This approach controls both data
integrity and message bounds.
- vsock_perf:
- grammar fixes
- only long parameters supported(instead of only short)
v1 -> v2:
- Three new patches from Bobby Eshleman to kernel part
- Message bounds test: some refactoring and add comment to describe
hashing purpose
- Big message test: check 'errno' for EMSGSIZE and move new test to
the end of tests array
- vsock_perf:
- update README file
- add simple usage example to commit message
- update '-h' (help) output
- use 'stdout' for output instead of 'stderr'
- use 'strtol' instead of 'atoi'
Bobby Eshleman(1):
vsock: return errors other than -ENOMEM to socket
Arseniy Krasnov(3):
test/vsock: rework message bound test
test/vsock: add big message test
test/vsock: vsock_perf utility
net/vmw_vsock/af_vsock.c | 3 +-
tools/testing/vsock/Makefile | 3 +-
tools/testing/vsock/README | 34 +++
tools/testing/vsock/control.c | 28 +++
tools/testing/vsock/control.h | 2 +
tools/testing/vsock/util.c | 13 ++
tools/testing/vsock/util.h | 1 +
tools/testing/vsock/vsock_perf.c | 441 +++++++++++++++++++++++++++++++++++++++
tools/testing/vsock/vsock_test.c | 197 +++++++++++++++--
9 files changed, 705 insertions(+), 17 deletions(-)
--
2.25.1
Powered by blists - more mailing lists