[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y7v3hgcyGpXdlJcE@aspen.lan>
Date: Mon, 9 Jan 2023 11:16:22 +0000
From: Daniel Thompson <daniel.thompson@...aro.org>
To: Sam Ravnborg <sam@...nborg.org>
Cc: Stephen Kitt <steve@....org>,
Sam Ravnborg via B4 Submission Endpoint
<devnull+sam.ravnborg.org@...nel.org>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
linux-staging@...ts.linux.dev,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-fbdev@...r.kernel.org, dri-devel@...ts.freedesktop.org,
linux-kernel@...r.kernel.org, Paul Mackerras <paulus@...ba.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Helge Deller <deller@....de>, Lee Jones <lee@...nel.org>,
Miguel Ojeda <ojeda@...nel.org>,
Antonino Daplas <adaplas@...il.com>,
linux-omap@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Robin van der Gracht <robin@...tonic.nl>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Jingoo Han <jingoohan1@...il.com>,
linuxppc-dev@...ts.ozlabs.org,
Claudiu Beznea <claudiu.beznea@...rochip.com>
Subject: Re: [PATCH 09/15] staging: fbtft: fb_ssd1351.c: Introduce
backlight_is_blank()
On Sun, Jan 08, 2023 at 09:29:43PM +0100, Sam Ravnborg wrote:
> Hi Stephen,
>
> On Sun, Jan 08, 2023 at 08:28:17PM +0100, Stephen Kitt wrote:
> > On Sat, 07 Jan 2023 19:26:23 +0100, Sam Ravnborg via B4 Submission Endpoint
> > <devnull+sam.ravnborg.org@...nel.org> wrote:
> >
> > > From: Sam Ravnborg <sam@...nborg.org>
> > >
> > > Avoiding direct access to backlight_properties.props.
> > >
> > > Access to the deprecated props.fb_blank replaced by backlight_is_blank().
> > > Access to props.power is dropped - it was only used for debug.
> > >
> > > Signed-off-by: Sam Ravnborg <sam@...nborg.org>
> > > Cc: Stephen Kitt <steve@....org>
> > > Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
> > > Cc: Daniel Thompson <daniel.thompson@...aro.org>
> > > Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
> > > Cc: linux-fbdev@...r.kernel.org
> > > ---
> > > drivers/staging/fbtft/fb_ssd1351.c | 9 +++------
> > > 1 file changed, 3 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/drivers/staging/fbtft/fb_ssd1351.c
> > > b/drivers/staging/fbtft/fb_ssd1351.c index b8d55aa8c5c7..995fbd2f3dc6 100644
> > > --- a/drivers/staging/fbtft/fb_ssd1351.c
> > > +++ b/drivers/staging/fbtft/fb_ssd1351.c
> > > @@ -190,15 +190,12 @@ static struct fbtft_display display = {
> > > static int update_onboard_backlight(struct backlight_device *bd)
> > > {
> > > struct fbtft_par *par = bl_get_data(bd);
> > > - bool on;
> > > + bool blank = backlight_is_blank(bd);
> > >
> > > - fbtft_par_dbg(DEBUG_BACKLIGHT, par,
> > > - "%s: power=%d, fb_blank=%d\n",
> > > - __func__, bd->props.power, bd->props.fb_blank);
> > > + fbtft_par_dbg(DEBUG_BACKLIGHT, par, "%s: blank=%d\n", __func__,
> > > blank);
> > > - on = !backlight_is_blank(bd);
> > > /* Onboard backlight connected to GPIO0 on SSD1351, GPIO1 unused */
> > > - write_reg(par, 0xB5, on ? 0x03 : 0x02);
> > > + write_reg(par, 0xB5, !blank ? 0x03 : 0x02);
> > >
> > > return 0;
> > > }
> > >
> > > --
> > > 2.34.1
> >
> > For debugging purposes here, would there be any point in logging props.state?
> > As in
> >
> > fbtft_par_dbg(DEBUG_BACKLIGHT, par,
> > - "%s: power=%d, fb_blank=%d\n",
> > - __func__, bd->props.power, bd->props.fb_blank);
> > + "%s: power=%d, state=%u\n",
> > + __func__, bd->props.power, bd->props.state);
>
> Thanks for the suggestion - and the reviews!
>
> I was tempted to just remove the debugging.
> If we require debugging, then this could be added in the backlight core,
> thus everyone would benefit from it.
I had the same instinct to remove the debug print here (esp. ones with
__func__ in them) but I think that's probably a much more widely scoped
clean up for fbtft ;-).
On that basis:
Reviewed-by: Daniel Thompson <daniel.thompson@...aro.org>
Daniel.
Powered by blists - more mailing lists