[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230110103420.2430518-1-daniel.lezcano@kernel.org>
Date: Tue, 10 Jan 2023 11:34:20 +0100
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: daniel.lezcano@...aro.org, rafael@...nel.org,
dmitry.baryshkov@...aro.org
Cc: andersson@...nel.org, konrad.dybcio@...aro.org,
linux-pm@...r.kernel.org, linux-arm-msm@...r.kernel.org,
Amit Kucheria <amitk@...nel.org>,
Thara Gopinath <thara.gopinath@...il.com>,
Andy Gross <agross@...nel.org>,
Zhang Rui <rui.zhang@...el.com>,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH] thermal/drivers/qcom: Remove duplicate set next trip point interrupt code
From: Daniel Lezcano <daniel.lezcano@...aro.org>
The tsens driver reprogram the next trip points in the irq
handler. This function then call thermal_zone_device_update().
However, thermal_zone_device_update() calls thermal_zone_set_trips()
and from there it calls the backend 'set_trips' ops. This one in turn
reprogram the next trip points (low/high).
Consequently, the code setting the next trip points interrupt in the
interrupt handle is not needed and could be removed.
Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@...nel.org>
---
drivers/thermal/qcom/tsens.c | 46 +-----------------------------------
1 file changed, 1 insertion(+), 45 deletions(-)
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index b5b136ff323f..58693ee8c430 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -472,52 +472,8 @@ static irqreturn_t tsens_irq_thread(int irq, void *data)
continue;
if (!tsens_threshold_violated(priv, hw_id, &d))
continue;
- ret = get_temp_tsens_valid(s, &temp);
- if (ret) {
- dev_err(priv->dev, "[%u] %s: error reading sensor\n",
- hw_id, __func__);
- continue;
- }
- spin_lock_irqsave(&priv->ul_lock, flags);
-
- tsens_read_irq_state(priv, hw_id, s, &d);
-
- if (d.up_viol &&
- !masked_irq(hw_id, d.up_irq_mask, tsens_version(priv))) {
- tsens_set_interrupt(priv, hw_id, UPPER, disable);
- if (d.up_thresh > temp) {
- dev_dbg(priv->dev, "[%u] %s: re-arm upper\n",
- hw_id, __func__);
- tsens_set_interrupt(priv, hw_id, UPPER, enable);
- } else {
- trigger = true;
- /* Keep irq masked */
- }
- } else if (d.low_viol &&
- !masked_irq(hw_id, d.low_irq_mask, tsens_version(priv))) {
- tsens_set_interrupt(priv, hw_id, LOWER, disable);
- if (d.low_thresh < temp) {
- dev_dbg(priv->dev, "[%u] %s: re-arm low\n",
- hw_id, __func__);
- tsens_set_interrupt(priv, hw_id, LOWER, enable);
- } else {
- trigger = true;
- /* Keep irq masked */
- }
- }
-
- spin_unlock_irqrestore(&priv->ul_lock, flags);
-
- if (trigger) {
- dev_dbg(priv->dev, "[%u] %s: TZ update trigger (%d mC)\n",
- hw_id, __func__, temp);
- thermal_zone_device_update(s->tzd,
- THERMAL_EVENT_UNSPECIFIED);
- } else {
- dev_dbg(priv->dev, "[%u] %s: no violation: %d\n",
- hw_id, __func__, temp);
- }
+ thermal_zone_device_update(s->tzd, THERMAL_EVENT_UNSPECIFIED);
if (tsens_version(priv) < VER_0_1) {
/* Constraint: There is only 1 interrupt control register for all
--
2.34.1
Powered by blists - more mailing lists