lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230112145140.67573-1-andriy.shevchenko@linux.intel.com>
Date:   Thu, 12 Jan 2023 16:51:40 +0200
From:   Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:     Bartosz Golaszewski <bartosz.golaszewski@...aro.org>,
        Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Cc:     Linus Walleij <linus.walleij@...aro.org>,
        Bartosz Golaszewski <brgl@...ev.pl>,
        Rob Herring <robh+dt@...nel.org>,
        Frank Rowand <frowand.list@...il.com>
Subject: [PATCH v1 1/1] gpiolib: of: Move enum of_gpio_flags to its only user

GPIO library for OF is the only user for enum of_gpio_flags.
Move it there.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
 drivers/gpio/gpiolib-of.c | 15 +++++++++++++++
 include/linux/of_gpio.h   | 15 ---------------
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index edc769d2d338..72d8a3da31e3 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -23,6 +23,21 @@
 #include "gpiolib.h"
 #include "gpiolib-of.h"
 
+/*
+ * This is Linux-specific flags. By default controllers' and Linux' mapping
+ * match, but GPIO controllers are free to translate their own flags to
+ * Linux-specific in their .xlate callback. Though, 1:1 mapping is recommended.
+ */
+enum of_gpio_flags {
+	OF_GPIO_ACTIVE_LOW = 0x1,
+	OF_GPIO_SINGLE_ENDED = 0x2,
+	OF_GPIO_OPEN_DRAIN = 0x4,
+	OF_GPIO_TRANSITORY = 0x8,
+	OF_GPIO_PULL_UP = 0x10,
+	OF_GPIO_PULL_DOWN = 0x20,
+	OF_GPIO_PULL_DISABLE = 0x40,
+};
+
 /**
  * of_gpio_named_count() - Count GPIOs for a device
  * @np:		device node to count GPIOs for
diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h
index 935225caf70d..5d58b3b0a97e 100644
--- a/include/linux/of_gpio.h
+++ b/include/linux/of_gpio.h
@@ -17,21 +17,6 @@
 
 struct device_node;
 
-/*
- * This is Linux-specific flags. By default controllers' and Linux' mapping
- * match, but GPIO controllers are free to translate their own flags to
- * Linux-specific in their .xlate callback. Though, 1:1 mapping is recommended.
- */
-enum of_gpio_flags {
-	OF_GPIO_ACTIVE_LOW = 0x1,
-	OF_GPIO_SINGLE_ENDED = 0x2,
-	OF_GPIO_OPEN_DRAIN = 0x4,
-	OF_GPIO_TRANSITORY = 0x8,
-	OF_GPIO_PULL_UP = 0x10,
-	OF_GPIO_PULL_DOWN = 0x20,
-	OF_GPIO_PULL_DISABLE = 0x40,
-};
-
 #ifdef CONFIG_OF_GPIO
 
 #include <linux/container_of.h>
-- 
2.39.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ