| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <60319111-c5a6-d859-d8c7-62ec15c6e206@yadro.com>
Date: Mon, 16 Jan 2023 17:11:43 +0300
From: Evgenii Shatokhin <e.shatokhin@...ro.com>
To: <guoren@...nel.org>
CC: <linux-riscv@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
Guo Ren <guoren@...ux.alibaba.com>, <anup@...infault.org>,
<paul.walmsley@...ive.com>, <palmer@...belt.com>,
<conor.dooley@...rochip.com>, <heiko@...ech.de>,
<rostedt@...dmis.org>, <mhiramat@...nel.org>, <jolsa@...hat.com>,
<bp@...e.de>, <jpoimboe@...nel.org>, <suagrfillet@...il.com>,
<andy.chiu@...ive.com>, <linux@...ro.com>
Subject: Re: [PATCH -next V7 3/7] riscv: ftrace: Reduce the detour code size
to half
Hi,
On 12.01.2023 12:05, guoren@...nel.org wrote:
> From: Guo Ren <guoren@...ux.alibaba.com>
>
> Use a temporary register to reduce the size of detour code from 16 bytes to
> 8 bytes. The previous implementation is from 'commit afc76b8b8011 ("riscv:
> Using PATCHABLE_FUNCTION_ENTRY instead of MCOUNT")'.
>
> Before the patch:
> <func_prolog>:
> 0: REG_S ra, -SZREG(sp)
> 4: auipc ra, ?
> 8: jalr ?(ra)
> 12: REG_L ra, -SZREG(sp)
> (func_boddy)
>
> After the patch:
> <func_prolog>:
> 0: auipc t0, ?
> 4: jalr t0, ?(t0)
> (func_boddy)
>
> This patch not just reduces the size of detour code, but also fixes an
> important issue:
>
> An Ftrace callback registered with FTRACE_OPS_FL_IPMODIFY flag can
> actually change the instruction pointer, e.g. to "replace" the given
> kernel function with a new one, which is needed for livepatching, etc.
>
> In this case, the trampoline (ftrace_regs_caller) would not return to
> <func_prolog+12> but would rather jump to the new function. So, "REG_L
> ra, -SZREG(sp)" would not run and the original return address would not
> be restored. The kernel is likely to hang or crash as a result.
>
> This can be easily demonstrated if one tries to "replace", say,
> cmdline_proc_show() with a new function with the same signature using
> instruction_pointer_set(&fregs->regs, new_func_addr) in the Ftrace
> callback.
>
> Link: https://lore.kernel.org/linux-riscv/20221122075440.1165172-1-suagrfillet@gmail.com/
> Link: https://lore.kernel.org/linux-riscv/d7d5730b-ebef-68e5-5046-e763e1ee6164@yadro.com/
> Co-developed-by: Song Shuai <suagrfillet@...il.com>
> Signed-off-by: Song Shuai <suagrfillet@...il.com>
> Signed-off-by: Guo Ren <guoren@...ux.alibaba.com>
> Signed-off-by: Guo Ren <guoren@...nel.org>
> Cc: Evgenii Shatokhin <e.shatokhin@...ro.com>
> ---
> arch/riscv/Makefile | 4 +-
> arch/riscv/include/asm/ftrace.h | 50 +++++++++++++++++++------
> arch/riscv/kernel/ftrace.c | 65 ++++++++++-----------------------
> arch/riscv/kernel/mcount-dyn.S | 42 ++++++++-------------
> 4 files changed, 75 insertions(+), 86 deletions(-)
>
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index ea5a91da6897..3c9aaf67ed79 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -12,9 +12,9 @@ ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
> LDFLAGS_vmlinux := --no-relax
> KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
> ifeq ($(CONFIG_RISCV_ISA_C),y)
> - CC_FLAGS_FTRACE := -fpatchable-function-entry=8
> -else
> CC_FLAGS_FTRACE := -fpatchable-function-entry=4
> +else
> + CC_FLAGS_FTRACE := -fpatchable-function-entry=2
> endif
> endif
>
> diff --git a/arch/riscv/include/asm/ftrace.h b/arch/riscv/include/asm/ftrace.h
> index 04dad3380041..9e73922e1e2e 100644
> --- a/arch/riscv/include/asm/ftrace.h
> +++ b/arch/riscv/include/asm/ftrace.h
> @@ -42,6 +42,14 @@ struct dyn_arch_ftrace {
> * 2) jalr: setting low-12 offset to ra, jump to ra, and set ra to
> * return address (original pc + 4)
> *
> + *<ftrace enable>:
> + * 0: auipc t0/ra, 0x?
> + * 4: jalr t0/ra, ?(t0/ra)
> + *
> + *<ftrace disable>:
> + * 0: nop
> + * 4: nop
> + *
> * Dynamic ftrace generates probes to call sites, so we must deal with
> * both auipc and jalr at the same time.
> */
> @@ -52,25 +60,43 @@ struct dyn_arch_ftrace {
> #define AUIPC_OFFSET_MASK (0xfffff000)
> #define AUIPC_PAD (0x00001000)
> #define JALR_SHIFT 20
> -#define JALR_BASIC (0x000080e7)
> -#define AUIPC_BASIC (0x00000097)
> +#define JALR_RA (0x000080e7)
> +#define AUIPC_RA (0x00000097)
> +#define JALR_T0 (0x000282e7)
> +#define AUIPC_T0 (0x00000297)
> #define NOP4 (0x00000013)
>
> -#define make_call(caller, callee, call) \
> +#define to_jalr_t0(offset) \
> + (((offset & JALR_OFFSET_MASK) << JALR_SHIFT) | JALR_T0)
> +
> +#define to_auipc_t0(offset) \
> + ((offset & JALR_SIGN_MASK) ? \
> + (((offset & AUIPC_OFFSET_MASK) + AUIPC_PAD) | AUIPC_T0) : \
> + ((offset & AUIPC_OFFSET_MASK) | AUIPC_T0))
> +
> +#define make_call_t0(caller, callee, call) \
> do { \
> - call[0] = to_auipc_insn((unsigned int)((unsigned long)callee - \
> - (unsigned long)caller)); \
> - call[1] = to_jalr_insn((unsigned int)((unsigned long)callee - \
> - (unsigned long)caller)); \
> + unsigned int offset = \
> + (unsigned long) callee - (unsigned long) caller; \
> + call[0] = to_auipc_t0(offset); \
> + call[1] = to_jalr_t0(offset); \
> } while (0)
>
> -#define to_jalr_insn(offset) \
> - (((offset & JALR_OFFSET_MASK) << JALR_SHIFT) | JALR_BASIC)
> +#define to_jalr_ra(offset) \
> + (((offset & JALR_OFFSET_MASK) << JALR_SHIFT) | JALR_RA)
>
> -#define to_auipc_insn(offset) \
> +#define to_auipc_ra(offset) \
> ((offset & JALR_SIGN_MASK) ? \
> - (((offset & AUIPC_OFFSET_MASK) + AUIPC_PAD) | AUIPC_BASIC) : \
> - ((offset & AUIPC_OFFSET_MASK) | AUIPC_BASIC))
> + (((offset & AUIPC_OFFSET_MASK) + AUIPC_PAD) | AUIPC_RA) : \
> + ((offset & AUIPC_OFFSET_MASK) | AUIPC_RA))
> +
> +#define make_call_ra(caller, callee, call) \
> +do { \
> + unsigned int offset = \
> + (unsigned long) callee - (unsigned long) caller; \
> + call[0] = to_auipc_ra(offset); \
> + call[1] = to_jalr_ra(offset); \
> +} while (0)
>
> /*
> * Let auipc+jalr be the basic *mcount unit*, so we make it 8 bytes here.
> diff --git a/arch/riscv/kernel/ftrace.c b/arch/riscv/kernel/ftrace.c
> index 2086f6585773..5bff37af4770 100644
> --- a/arch/riscv/kernel/ftrace.c
> +++ b/arch/riscv/kernel/ftrace.c
> @@ -55,12 +55,15 @@ static int ftrace_check_current_call(unsigned long hook_pos,
> }
>
> static int __ftrace_modify_call(unsigned long hook_pos, unsigned long target,
> - bool enable)
> + bool enable, bool ra)
> {
> unsigned int call[2];
> unsigned int nops[2] = {NOP4, NOP4};
>
> - make_call(hook_pos, target, call);
> + if (ra)
> + make_call_ra(hook_pos, target, call);
> + else
> + make_call_t0(hook_pos, target, call);
>
> /* Replace the auipc-jalr pair at once. Return -EPERM on write error. */
> if (patch_text_nosync
> @@ -70,42 +73,13 @@ static int __ftrace_modify_call(unsigned long hook_pos, unsigned long target,
> return 0;
> }
>
> -/*
> - * Put 5 instructions with 16 bytes at the front of function within
> - * patchable function entry nops' area.
> - *
> - * 0: REG_S ra, -SZREG(sp)
> - * 1: auipc ra, 0x?
> - * 2: jalr -?(ra)
> - * 3: REG_L ra, -SZREG(sp)
> - *
> - * So the opcodes is:
> - * 0: 0xfe113c23 (sd)/0xfe112e23 (sw)
> - * 1: 0x???????? -> auipc
> - * 2: 0x???????? -> jalr
> - * 3: 0xff813083 (ld)/0xffc12083 (lw)
> - */
> -#if __riscv_xlen == 64
> -#define INSN0 0xfe113c23
> -#define INSN3 0xff813083
> -#elif __riscv_xlen == 32
> -#define INSN0 0xfe112e23
> -#define INSN3 0xffc12083
> -#endif
> -
> -#define FUNC_ENTRY_SIZE 16
> -#define FUNC_ENTRY_JMP 4
> -
> int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> {
> - unsigned int call[4] = {INSN0, 0, 0, INSN3};
> - unsigned long target = addr;
> - unsigned long caller = rec->ip + FUNC_ENTRY_JMP;
> + unsigned int call[2];
>
> - call[1] = to_auipc_insn((unsigned int)(target - caller));
> - call[2] = to_jalr_insn((unsigned int)(target - caller));
> + make_call_t0(rec->ip, addr, call);
>
> - if (patch_text_nosync((void *)rec->ip, call, FUNC_ENTRY_SIZE))
> + if (patch_text_nosync((void *)rec->ip, call, MCOUNT_INSN_SIZE))
> return -EPERM;
>
> return 0;
> @@ -114,15 +88,14 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
> unsigned long addr)
> {
> - unsigned int nops[4] = {NOP4, NOP4, NOP4, NOP4};
> + unsigned int nops[2] = {NOP4, NOP4};
>
> - if (patch_text_nosync((void *)rec->ip, nops, FUNC_ENTRY_SIZE))
> + if (patch_text_nosync((void *)rec->ip, nops, MCOUNT_INSN_SIZE))
> return -EPERM;
>
> return 0;
> }
>
> -
> /*
> * This is called early on, and isn't wrapped by
> * ftrace_arch_code_modify_{prepare,post_process}() and therefor doesn't hold
> @@ -144,10 +117,10 @@ int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec)
> int ftrace_update_ftrace_func(ftrace_func_t func)
> {
> int ret = __ftrace_modify_call((unsigned long)&ftrace_call,
> - (unsigned long)func, true);
> + (unsigned long)func, true, true);
> if (!ret) {
> ret = __ftrace_modify_call((unsigned long)&ftrace_regs_call,
> - (unsigned long)func, true);
> + (unsigned long)func, true, true);
> }
>
> return ret;
> @@ -159,16 +132,16 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
> unsigned long addr)
> {
> unsigned int call[2];
> - unsigned long caller = rec->ip + FUNC_ENTRY_JMP;
> + unsigned long caller = rec->ip;
> int ret;
>
> - make_call(caller, old_addr, call);
> + make_call_t0(caller, old_addr, call);
> ret = ftrace_check_current_call(caller, call);
>
> if (ret)
> return ret;
>
> - return __ftrace_modify_call(caller, addr, true);
> + return __ftrace_modify_call(caller, addr, true, false);
> }
> #endif
>
> @@ -203,12 +176,12 @@ int ftrace_enable_ftrace_graph_caller(void)
> int ret;
>
> ret = __ftrace_modify_call((unsigned long)&ftrace_graph_call,
> - (unsigned long)&prepare_ftrace_return, true);
> + (unsigned long)&prepare_ftrace_return, true, true);
> if (ret)
> return ret;
>
> return __ftrace_modify_call((unsigned long)&ftrace_graph_regs_call,
> - (unsigned long)&prepare_ftrace_return, true);
> + (unsigned long)&prepare_ftrace_return, true, true);
> }
>
> int ftrace_disable_ftrace_graph_caller(void)
> @@ -216,12 +189,12 @@ int ftrace_disable_ftrace_graph_caller(void)
> int ret;
>
> ret = __ftrace_modify_call((unsigned long)&ftrace_graph_call,
> - (unsigned long)&prepare_ftrace_return, false);
> + (unsigned long)&prepare_ftrace_return, false, true);
> if (ret)
> return ret;
>
> return __ftrace_modify_call((unsigned long)&ftrace_graph_regs_call,
> - (unsigned long)&prepare_ftrace_return, false);
> + (unsigned long)&prepare_ftrace_return, false, true);
> }
> #endif /* CONFIG_DYNAMIC_FTRACE */
> #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
> diff --git a/arch/riscv/kernel/mcount-dyn.S b/arch/riscv/kernel/mcount-dyn.S
> index d171eca623b6..125de818d1ba 100644
> --- a/arch/riscv/kernel/mcount-dyn.S
> +++ b/arch/riscv/kernel/mcount-dyn.S
> @@ -13,8 +13,8 @@
>
> .text
>
> -#define FENTRY_RA_OFFSET 12
> -#define ABI_SIZE_ON_STACK 72
> +#define FENTRY_RA_OFFSET 8
> +#define ABI_SIZE_ON_STACK 80
> #define ABI_A0 0
> #define ABI_A1 8
> #define ABI_A2 16
> @@ -23,10 +23,10 @@
> #define ABI_A5 40
> #define ABI_A6 48
> #define ABI_A7 56
> -#define ABI_RA 64
> +#define ABI_T0 64
> +#define ABI_RA 72
>
> .macro SAVE_ABI
> - addi sp, sp, -SZREG
> addi sp, sp, -ABI_SIZE_ON_STACK
>
> REG_S a0, ABI_A0(sp)
> @@ -37,6 +37,7 @@
> REG_S a5, ABI_A5(sp)
> REG_S a6, ABI_A6(sp)
> REG_S a7, ABI_A7(sp)
> + REG_S t0, ABI_T0(sp)
> REG_S ra, ABI_RA(sp)
> .endm
>
> @@ -49,24 +50,18 @@
> REG_L a5, ABI_A5(sp)
> REG_L a6, ABI_A6(sp)
> REG_L a7, ABI_A7(sp)
> + REG_L t0, ABI_T0(sp)
> REG_L ra, ABI_RA(sp)
>
> addi sp, sp, ABI_SIZE_ON_STACK
> - addi sp, sp, SZREG
> .endm
>
> #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> .macro SAVE_ALL
> - addi sp, sp, -SZREG
> addi sp, sp, -PT_SIZE_ON_STACK
>
> - REG_S x1, PT_EPC(sp)
> - addi sp, sp, PT_SIZE_ON_STACK
> - REG_L x1, (sp)
> - addi sp, sp, -PT_SIZE_ON_STACK
> + REG_S t0, PT_EPC(sp)
> REG_S x1, PT_RA(sp)
> - REG_L x1, PT_EPC(sp)
> -
> REG_S x2, PT_SP(sp)
> REG_S x3, PT_GP(sp)
> REG_S x4, PT_TP(sp)
> @@ -100,15 +95,11 @@
> .endm
>
> .macro RESTORE_ALL
> + REG_L t0, PT_EPC(sp)
> REG_L x1, PT_RA(sp)
> - addi sp, sp, PT_SIZE_ON_STACK
> - REG_S x1, (sp)
> - addi sp, sp, -PT_SIZE_ON_STACK
> - REG_L x1, PT_EPC(sp)
> REG_L x2, PT_SP(sp)
> REG_L x3, PT_GP(sp)
> REG_L x4, PT_TP(sp)
> - REG_L x5, PT_T0(sp)
> REG_L x6, PT_T1(sp)
> REG_L x7, PT_T2(sp)
> REG_L x8, PT_S0(sp)
> @@ -137,17 +128,16 @@
> REG_L x31, PT_T6(sp)
>
> addi sp, sp, PT_SIZE_ON_STACK
> - addi sp, sp, SZREG
> .endm
> #endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
>
> ENTRY(ftrace_caller)
> SAVE_ABI
>
> - addi a0, ra, -FENTRY_RA_OFFSET
> + addi a0, t0, -FENTRY_RA_OFFSET
> la a1, function_trace_op
> REG_L a2, 0(a1)
> - REG_L a1, ABI_SIZE_ON_STACK(sp)
> + mv a1, ra
> mv a3, sp
>
> ftrace_call:
> @@ -155,8 +145,8 @@ ftrace_call:
> call ftrace_stub
>
> #ifdef CONFIG_FUNCTION_GRAPH_TRACER
> - addi a0, sp, ABI_SIZE_ON_STACK
> - REG_L a1, ABI_RA(sp)
> + addi a0, sp, ABI_RA
> + REG_L a1, ABI_T0(sp)
> addi a1, a1, -FENTRY_RA_OFFSET
> #ifdef HAVE_FUNCTION_GRAPH_FP_TEST
> mv a2, s0
> @@ -166,17 +156,17 @@ ftrace_graph_call:
> call ftrace_stub
> #endif
> RESTORE_ABI
> - ret
> + jr t0
> ENDPROC(ftrace_caller)
>
> #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> ENTRY(ftrace_regs_caller)
> SAVE_ALL
>
> - addi a0, ra, -FENTRY_RA_OFFSET
> + addi a0, t0, -FENTRY_RA_OFFSET
> la a1, function_trace_op
> REG_L a2, 0(a1)
> - REG_L a1, PT_SIZE_ON_STACK(sp)
> + mv a1, ra
> mv a3, sp
>
> ftrace_regs_call:
> @@ -196,6 +186,6 @@ ftrace_graph_regs_call:
> #endif
>
> RESTORE_ALL
> - ret
> + jr t0
> ENDPROC(ftrace_regs_caller)
> #endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
> --
> 2.36.1
>
>
Looks good to me.
I also re-checked if "replacement" of cmdline_proc_show() with a custom
function via Ftrace works in this case - it does. Rollback to the
original cmdline_proc_show() seems to work OK too.
Reviewed-by: Evgenii Shatokhin <e.shatokhin@...ro.com>
Regards,
Evgenii
Powered by blists - more mailing lists