linux-kernel - [PATCH v6 1/3] remoteproc: k3-r5: Simplify single core config set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230116151906.549384-2-devarsht@ti.com>
Date:   Mon, 16 Jan 2023 20:49:04 +0530
From:   Devarsh Thakkar <devarsht@...com>
To:     <andersson@...nel.org>, <devicetree@...r.kernel.org>,
        <mathieu.poirier@...aro.org>, <p.zabel@...gutronix.de>,
        <linux-remoteproc@...r.kernel.org>, <robh+dt@...nel.org>,
        <linux-kernel@...r.kernel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <s-anna@...com>
CC:     <hnagalla@...com>, <praneeth@...com>, <nm@...com>,
        <vigneshr@...com>, <a-bhatia1@...com>, <j-luthra@...com>,
        <devarsht@...com>
Subject: [PATCH v6 1/3] remoteproc: k3-r5: Simplify single core config set

The config PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE
is set only when cluster mode is set to
CLUSTER_MODE_SINGLECPU and cluster mode
is already configured before setting this config.

So directly check for cluster mode instead of checking
soc_data->single_cpu_mode first and then checking
cluster mode.

Signed-off-by: Devarsh Thakkar <devarsht@...com>
---
V6: No change
---
 drivers/remoteproc/ti_k3_r5_remoteproc.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c b/drivers/remoteproc/ti_k3_r5_remoteproc.c
index 0481926c6975..036c9dc217f3 100644
--- a/drivers/remoteproc/ti_k3_r5_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c
@@ -875,15 +875,14 @@ static int k3_r5_rproc_configure(struct k3_r5_rproc *kproc)
 	boot_vec = 0x0;
 	if (core == core0) {
 		clr_cfg = PROC_BOOT_CFG_FLAG_R5_TEINIT;
-		if (cluster->soc_data->single_cpu_mode) {
-			/*
-			 * Single-CPU configuration bit can only be configured
-			 * on Core0 and system firmware will NACK any requests
-			 * with the bit configured, so program it only on
-			 * permitted cores
-			 */
-			if (cluster->mode == CLUSTER_MODE_SINGLECPU)
-				set_cfg = PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE;
+		/*
+		 * Single-CPU configuration bit can only be configured
+		 * on Core0 and system firmware will NACK any requests
+		 * with the bit configured, so program it only on
+		 * permitted cores
+		 */
+		if (cluster->mode == CLUSTER_MODE_SINGLECPU) {
+			set_cfg = PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE;
 		} else {
 			/*
 			 * LockStep configuration bit is Read-only on Split-mode
-- 
2.34.1