| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CABvJ_xif_nw_Ehbs8OPOjoeh8rfr2jpHak4drkqH-QbOySGC9A@mail.gmail.com>
Date: Tue, 17 Jan 2023 15:09:35 +0800
From: Vincent Chen <vincent.chen@...ive.com>
To: apatel@...tanamicro.com
Cc: Palmer Dabbelt <palmer@...belt.com>,
Paul Walmsley <paul.walmsley@...ive.com>, tglx@...utronix.de,
maz@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
Atish Patra <atishp@...shpatra.org>,
Alistair Francis <Alistair.Francis@....com>,
Anup Patel <anup@...infault.org>,
linux-riscv <linux-riscv@...ts.infradead.org>,
"linux-kernel@...r.kernel.org List" <linux-kernel@...r.kernel.org>,
devicetree@...r.kernel.org, Vincent Chen <vincent.chen@...ive.com>
Subject: Fwd: [PATCH v2 7/9] irqchip: Add RISC-V advanced PLIC driver
> From: Anup Patel <apatel@...tanamicro.com>
> Date: Wed, Jan 4, 2023 at 1:19 AM
> Subject: [PATCH v2 7/9] irqchip: Add RISC-V advanced PLIC driver
> To: Palmer Dabbelt <palmer@...belt.com>, Paul Walmsley <paul.walmsley@...ive.com>, Thomas Gleixner <tglx@...utronix.de>, Marc Zyngier <maz@...nel.org>, Rob Herring <robh+dt@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
> Cc: Atish Patra <atishp@...shpatra.org>, Alistair Francis <Alistair.Francis@....com>, Anup Patel <anup@...infault.org>, <linux-riscv@...ts.infradead.org>, <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>, Anup Patel <apatel@...tanamicro.com>
>
>
> The RISC-V advanced interrupt architecture (AIA) specification defines
> a new interrupt controller for managing wired interrupts on a RISC-V
> platform. This new interrupt controller is referred to as advanced
> platform-level interrupt controller (APLIC) which can forward wired
> interrupts to CPUs (or HARTs) as local interrupts OR as message
> signaled interrupts.
> (For more details refer https://github.com/riscv/riscv-aia)
>
I could not find an appropriate place to post my question, so I posted it here.
I am a little concerned about the current MSI IRQ handling in APLIC.
According to the specification, when domaincfg.DM = 1, the pending bit
is set to one by a low-to-high transition in the rectified input
value. When the APLIC forward this interrupt by MSI, the pending bit
will be cleared regardless of whether the interrupt type is
level-sensitive or edge-trigger. However, the interrupted service
routine may not deal with all requests at a time. When there are
remaining pending requests after leaving the ISR, these requests may
have no chance to be serviced if the IRQ type of this device is
level-sensitive. This is because the rectified value of this interrupt
changes from 0 to 1 only at the beginning. It causes the pending bit
of this interrupt will not to be asserted again, so APLIC will not
send the next MSI for this interrupt. Therefore, the ISR doesn't have
a chance to deal with the remaining requests.
One possible solution to fix this issue is to let the APLIC driver
check if the rectified value of the serviced interrupt is one after
returning from its ISR. When the value is 1, it means this device
still has pending requests. In this case, the APLIC driver can set its
pending bit by the setipnum register or the setip register. It will
let APLIC send the next MSI for this device, and the ISR will have a
chance to deal with the remaining requests.
> This patch adds an irqchip driver for RISC-V APLIC found on RISC-V
> platforms.
>
> Signed-off-by: Anup Patel <apatel@...tanamicro.com>
> ---
> drivers/irqchip/Kconfig | 6 +
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-riscv-aplic.c | 670 ++++++++++++++++++++++++++++
> include/linux/irqchip/riscv-aplic.h | 117 +++++
> 4 files changed, 794 insertions(+)
> create mode 100644 drivers/irqchip/irq-riscv-aplic.c
> create mode 100644 include/linux/irqchip/riscv-aplic.h
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index a1315189a595..936e59fe1f99 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -547,6 +547,12 @@ config SIFIVE_PLIC
> select IRQ_DOMAIN_HIERARCHY
> select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
>
> +config RISCV_APLIC
> + bool
> + depends on RISCV
> + select IRQ_DOMAIN_HIERARCHY
> + select GENERIC_MSI_IRQ_DOMAIN
> +
> config RISCV_IMSIC
> bool
> depends on RISCV
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 22c723cc6ec8..6154e5bc4228 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -96,6 +96,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o
> obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o
> obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
> obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o
> +obj-$(CONFIG_RISCV_APLIC) += irq-riscv-aplic.o
> obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic.o
> obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
> obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
> diff --git a/drivers/irqchip/irq-riscv-aplic.c b/drivers/irqchip/irq-riscv-aplic.c
> new file mode 100644
> index 000000000000..63f20892d7d3
> --- /dev/null
> +++ b/drivers/irqchip/irq-riscv-aplic.c
> @@ -0,0 +1,670 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2021 Western Digital Corporation or its affiliates.
> + * Copyright (C) 2022 Ventana Micro Systems Inc.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/cpu.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/irq.h>
> +#include <linux/irqchip.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqchip/riscv-aplic.h>
> +#include <linux/irqchip/riscv-imsic.h>
> +#include <linux/irqdomain.h>
> +#include <linux/module.h>
> +#include <linux/msi.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/smp.h>
> +
> +#define APLIC_DEFAULT_PRIORITY 1
> +#define APLIC_DISABLE_IDELIVERY 0
> +#define APLIC_ENABLE_IDELIVERY 1
> +#define APLIC_DISABLE_ITHRESHOLD 1
> +#define APLIC_ENABLE_ITHRESHOLD 0
> +
> +struct aplic_msicfg {
> + phys_addr_t base_ppn;
> + u32 hhxs;
> + u32 hhxw;
> + u32 lhxs;
> + u32 lhxw;
> +};
> +
> +struct aplic_idc {
> + unsigned int hart_index;
> + void __iomem *regs;
> + struct aplic_priv *priv;
> +};
> +
> +struct aplic_priv {
> + struct device *dev;
> + u32 nr_irqs;
> + u32 nr_idcs;
> + void __iomem *regs;
> + struct irq_domain *irqdomain;
> + struct aplic_msicfg msicfg;
> + struct cpumask lmask;
> +};
> +
> +static unsigned int aplic_idc_parent_irq;
> +static DEFINE_PER_CPU(struct aplic_idc, aplic_idcs);
> +
> +static void aplic_irq_unmask(struct irq_data *d)
> +{
> + struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
> +
> + writel(d->hwirq, priv->regs + APLIC_SETIENUM);
> +
> + if (!priv->nr_idcs)
> + irq_chip_unmask_parent(d);
> +}
> +
> +static void aplic_irq_mask(struct irq_data *d)
> +{
> + struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
> +
> + writel(d->hwirq, priv->regs + APLIC_CLRIENUM);
> +
> + if (!priv->nr_idcs)
> + irq_chip_mask_parent(d);
> +}
> +
> +static int aplic_set_type(struct irq_data *d, unsigned int type)
> +{
> + u32 val = 0;
> + void __iomem *sourcecfg;
> + struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
> +
> + switch (type) {
> + case IRQ_TYPE_NONE:
> + val = APLIC_SOURCECFG_SM_INACTIVE;
> + break;
> + case IRQ_TYPE_LEVEL_LOW:
> + val = APLIC_SOURCECFG_SM_LEVEL_LOW;
> + break;
> + case IRQ_TYPE_LEVEL_HIGH:
> + val = APLIC_SOURCECFG_SM_LEVEL_HIGH;
> + break;
> + case IRQ_TYPE_EDGE_FALLING:
> + val = APLIC_SOURCECFG_SM_EDGE_FALL;
> + break;
> + case IRQ_TYPE_EDGE_RISING:
> + val = APLIC_SOURCECFG_SM_EDGE_RISE;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + sourcecfg = priv->regs + APLIC_SOURCECFG_BASE;
> + sourcecfg += (d->hwirq - 1) * sizeof(u32);
> + writel(val, sourcecfg);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_SMP
> +static int aplic_set_affinity(struct irq_data *d,
> + const struct cpumask *mask_val, bool force)
> +{
> + struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
> + struct aplic_idc *idc;
> + unsigned int cpu, val;
> + struct cpumask amask;
> + void __iomem *target;
> +
> + if (!priv->nr_idcs)
> + return irq_chip_set_affinity_parent(d, mask_val, force);
> +
> + cpumask_and(&amask, &priv->lmask, mask_val);
> +
> + if (force)
> + cpu = cpumask_first(&amask);
> + else
> + cpu = cpumask_any_and(&amask, cpu_online_mask);
> +
> + if (cpu >= nr_cpu_ids)
> + return -EINVAL;
> +
> + idc = per_cpu_ptr(&aplic_idcs, cpu);
> + target = priv->regs + APLIC_TARGET_BASE;
> + target += (d->hwirq - 1) * sizeof(u32);
> + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK;
> + val <<= APLIC_TARGET_HART_IDX_SHIFT;
> + val |= APLIC_DEFAULT_PRIORITY;
> + writel(val, target);
> +
> + irq_data_update_effective_affinity(d, cpumask_of(cpu));
> +
> + return IRQ_SET_MASK_OK_DONE;
> +}
> +#endif
> +
> +static struct irq_chip aplic_chip = {
> + .name = "RISC-V APLIC",
> + .irq_mask = aplic_irq_mask,
> + .irq_unmask = aplic_irq_unmask,
> + .irq_set_type = aplic_set_type,
> +#ifdef CONFIG_SMP
> + .irq_set_affinity = aplic_set_affinity,
> +#endif
> + .flags = IRQCHIP_SET_TYPE_MASKED |
> + IRQCHIP_SKIP_SET_WAKE |
> + IRQCHIP_MASK_ON_SUSPEND,
> +};
> +
> +static int aplic_irqdomain_translate(struct irq_domain *d,
> + struct irq_fwspec *fwspec,
> + unsigned long *hwirq,
> + unsigned int *type)
> +{
> + if (WARN_ON(fwspec->param_count < 2))
> + return -EINVAL;
> + if (WARN_ON(!fwspec->param[0]))
> + return -EINVAL;
> +
> + *hwirq = fwspec->param[0];
> + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
> +
> + WARN_ON(*type == IRQ_TYPE_NONE);
> +
> + return 0;
> +}
> +
> +static int aplic_irqdomain_msi_alloc(struct irq_domain *domain,
> + unsigned int virq, unsigned int nr_irqs,
> + void *arg)
> +{
> + int i, ret;
> + unsigned int type;
> + irq_hw_number_t hwirq;
> + struct irq_fwspec *fwspec = arg;
> + struct aplic_priv *priv = platform_msi_get_host_data(domain);
> +
> + ret = aplic_irqdomain_translate(domain, fwspec, &hwirq, &type);
> + if (ret)
> + return ret;
> +
> + ret = platform_msi_device_domain_alloc(domain, virq, nr_irqs);
> + if (ret)
> + return ret;
> +
> + for (i = 0; i < nr_irqs; i++)
> + irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
> + &aplic_chip, priv);
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops aplic_irqdomain_msi_ops = {
> + .translate = aplic_irqdomain_translate,
> + .alloc = aplic_irqdomain_msi_alloc,
> + .free = platform_msi_device_domain_free,
> +};
> +
> +static int aplic_irqdomain_idc_alloc(struct irq_domain *domain,
> + unsigned int virq, unsigned int nr_irqs,
> + void *arg)
> +{
> + int i, ret;
> + unsigned int type;
> + irq_hw_number_t hwirq;
> + struct irq_fwspec *fwspec = arg;
> + struct aplic_priv *priv = domain->host_data;
> +
> + ret = aplic_irqdomain_translate(domain, fwspec, &hwirq, &type);
> + if (ret)
> + return ret;
> +
> + for (i = 0; i < nr_irqs; i++) {
> + irq_domain_set_info(domain, virq + i, hwirq + i,
> + &aplic_chip, priv, handle_simple_irq,
> + NULL, NULL);
> + irq_set_affinity(virq + i, &priv->lmask);
> + }
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops aplic_irqdomain_idc_ops = {
> + .translate = aplic_irqdomain_translate,
> + .alloc = aplic_irqdomain_idc_alloc,
> + .free = irq_domain_free_irqs_top,
> +};
> +
> +static void aplic_init_hw_irqs(struct aplic_priv *priv)
> +{
> + int i;
> +
> + /* Disable all interrupts */
> + for (i = 0; i <= priv->nr_irqs; i += 32)
> + writel(-1U, priv->regs + APLIC_CLRIE_BASE +
> + (i / 32) * sizeof(u32));
> +
> + /* Set interrupt type and default priority for all interrupts */
> + for (i = 1; i <= priv->nr_irqs; i++) {
> + writel(0, priv->regs + APLIC_SOURCECFG_BASE +
> + (i - 1) * sizeof(u32));
> + writel(APLIC_DEFAULT_PRIORITY,
> + priv->regs + APLIC_TARGET_BASE +
> + (i - 1) * sizeof(u32));
> + }
> +
> + /* Clear APLIC domaincfg */
> + writel(0, priv->regs + APLIC_DOMAINCFG);
> +}
> +
> +static void aplic_init_hw_global(struct aplic_priv *priv)
> +{
> + u32 val;
> +#ifdef CONFIG_RISCV_M_MODE
> + u32 valH;
> +
> + if (!priv->nr_idcs) {
> + val = priv->msicfg.base_ppn;
> + valH = (priv->msicfg.base_ppn >> 32) &
> + APLIC_xMSICFGADDRH_BAPPN_MASK;
> + valH |= (priv->msicfg.lhxw & APLIC_xMSICFGADDRH_LHXW_MASK)
> + << APLIC_xMSICFGADDRH_LHXW_SHIFT;
> + valH |= (priv->msicfg.hhxw & APLIC_xMSICFGADDRH_HHXW_MASK)
> + << APLIC_xMSICFGADDRH_HHXW_SHIFT;
> + valH |= (priv->msicfg.lhxs & APLIC_xMSICFGADDRH_LHXS_MASK)
> + << APLIC_xMSICFGADDRH_LHXS_SHIFT;
> + valH |= (priv->msicfg.hhxs & APLIC_xMSICFGADDRH_HHXS_MASK)
> + << APLIC_xMSICFGADDRH_HHXS_SHIFT;
> + writel(val, priv->regs + APLIC_xMSICFGADDR);
> + writel(valH, priv->regs + APLIC_xMSICFGADDRH);
> + }
> +#endif
> +
> + /* Setup APLIC domaincfg register */
> + val = readl(priv->regs + APLIC_DOMAINCFG);
> + val |= APLIC_DOMAINCFG_IE;
> + if (!priv->nr_idcs)
> + val |= APLIC_DOMAINCFG_DM;
> + writel(val, priv->regs + APLIC_DOMAINCFG);
> + if (readl(priv->regs + APLIC_DOMAINCFG) != val)
> + dev_warn(priv->dev,
> + "unable to write 0x%x in domaincfg\n", val);
> +}
> +
> +static void aplic_msi_write_msg(struct msi_desc *desc, struct msi_msg *msg)
> +{
> + unsigned int group_index, hart_index, guest_index, val;
> + struct device *dev = msi_desc_to_dev(desc);
> + struct aplic_priv *priv = dev_get_drvdata(dev);
> + struct irq_data *d = irq_get_irq_data(desc->irq);
> + struct aplic_msicfg *mc = &priv->msicfg;
> + phys_addr_t tppn, tbppn, msg_addr;
> + void __iomem *target;
> +
> + /* For zeroed MSI, simply write zero into the target register */
> + if (!msg->address_hi && !msg->address_lo && !msg->data) {
> + target = priv->regs + APLIC_TARGET_BASE;
> + target += (d->hwirq - 1) * sizeof(u32);
> + writel(0, target);
> + return;
> + }
> +
> + /* Sanity check on message data */
> + WARN_ON(msg->data > APLIC_TARGET_EIID_MASK);
> +
> + /* Compute target MSI address */
> + msg_addr = (((u64)msg->address_hi) << 32) | msg->address_lo;
> + tppn = msg_addr >> APLIC_xMSICFGADDR_PPN_SHIFT;
> +
> + /* Compute target HART Base PPN */
> + tbppn = tppn;
> + tbppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs);
> + tbppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs);
> + tbppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs);
> + WARN_ON(tbppn != mc->base_ppn);
> +
> + /* Compute target group and hart indexes */
> + group_index = (tppn >> APLIC_xMSICFGADDR_PPN_HHX_SHIFT(mc->hhxs)) &
> + APLIC_xMSICFGADDR_PPN_HHX_MASK(mc->hhxw);
> + hart_index = (tppn >> APLIC_xMSICFGADDR_PPN_LHX_SHIFT(mc->lhxs)) &
> + APLIC_xMSICFGADDR_PPN_LHX_MASK(mc->lhxw);
> + hart_index |= (group_index << mc->lhxw);
> + WARN_ON(hart_index > APLIC_TARGET_HART_IDX_MASK);
> +
> + /* Compute target guest index */
> + guest_index = tppn & APLIC_xMSICFGADDR_PPN_HART(mc->lhxs);
> + WARN_ON(guest_index > APLIC_TARGET_GUEST_IDX_MASK);
> +
> + /* Update IRQ TARGET register */
> + target = priv->regs + APLIC_TARGET_BASE;
> + target += (d->hwirq - 1) * sizeof(u32);
> + val = (hart_index & APLIC_TARGET_HART_IDX_MASK)
> + << APLIC_TARGET_HART_IDX_SHIFT;
> + val |= (guest_index & APLIC_TARGET_GUEST_IDX_MASK)
> + << APLIC_TARGET_GUEST_IDX_SHIFT;
> + val |= (msg->data & APLIC_TARGET_EIID_MASK);
> + writel(val, target);
> +}
> +
> +static int aplic_setup_msi(struct aplic_priv *priv)
> +{
> + struct device *dev = priv->dev;
> + struct aplic_msicfg *mc = &priv->msicfg;
> + const struct imsic_global_config *imsic_global;
> +
> + /*
> + * The APLIC outgoing MSI config registers assume target MSI
> + * controller to be RISC-V AIA IMSIC controller.
> + */
> + imsic_global = imsic_get_global_config();
> + if (!imsic_global) {
> + dev_err(dev, "IMSIC global config not found\n");
> + return -ENODEV;
> + }
> +
> + /* Find number of guest index bits (LHXS) */
> + mc->lhxs = imsic_global->guest_index_bits;
> + if (APLIC_xMSICFGADDRH_LHXS_MASK < mc->lhxs) {
> + dev_err(dev, "IMSIC guest index bits big for APLIC LHXS\n");
> + return -EINVAL;
> + }
> +
> + /* Find number of HART index bits (LHXW) */
> + mc->lhxw = imsic_global->hart_index_bits;
> + if (APLIC_xMSICFGADDRH_LHXW_MASK < mc->lhxw) {
> + dev_err(dev, "IMSIC hart index bits big for APLIC LHXW\n");
> + return -EINVAL;
> + }
> +
> + /* Find number of group index bits (HHXW) */
> + mc->hhxw = imsic_global->group_index_bits;
> + if (APLIC_xMSICFGADDRH_HHXW_MASK < mc->hhxw) {
> + dev_err(dev, "IMSIC group index bits big for APLIC HHXW\n");
> + return -EINVAL;
> + }
> +
> + /* Find first bit position of group index (HHXS) */
> + mc->hhxs = imsic_global->group_index_shift;
> + if (mc->hhxs < (2 * APLIC_xMSICFGADDR_PPN_SHIFT)) {
> + dev_err(dev, "IMSIC group index shift should be >= %d\n",
> + (2 * APLIC_xMSICFGADDR_PPN_SHIFT));
> + return -EINVAL;
> + }
> + mc->hhxs -= (2 * APLIC_xMSICFGADDR_PPN_SHIFT);
> + if (APLIC_xMSICFGADDRH_HHXS_MASK < mc->hhxs) {
> + dev_err(dev, "IMSIC group index shift big for APLIC HHXS\n");
> + return -EINVAL;
> + }
> +
> + /* Compute PPN base */
> + mc->base_ppn = imsic_global->base_addr >> APLIC_xMSICFGADDR_PPN_SHIFT;
> + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs);
> + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs);
> + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs);
> +
> + /* Use all possible CPUs as lmask */
> + cpumask_copy(&priv->lmask, cpu_possible_mask);
> +
> + return 0;
> +}
> +
> +/*
> + * To handle an APLIC IDC interrupts, we just read the CLAIMI register
> + * which will return highest priority pending interrupt and clear the
> + * pending bit of the interrupt. This process is repeated until CLAIMI
> + * register return zero value.
> + */
> +static void aplic_idc_handle_irq(struct irq_desc *desc)
> +{
> + struct aplic_idc *idc = this_cpu_ptr(&aplic_idcs);
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + irq_hw_number_t hw_irq;
> + int irq;
> +
> + chained_irq_enter(chip, desc);
> +
> + while ((hw_irq = readl(idc->regs + APLIC_IDC_CLAIMI))) {
> + hw_irq = hw_irq >> APLIC_IDC_TOPI_ID_SHIFT;
> + irq = irq_find_mapping(idc->priv->irqdomain, hw_irq);
> +
> + if (unlikely(irq <= 0))
> + pr_warn_ratelimited("hw_irq %lu mapping not found\n",
> + hw_irq);
> + else
> + generic_handle_irq(irq);
> + }
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> +static void aplic_idc_set_delivery(struct aplic_idc *idc, bool en)
> +{
> + u32 de = (en) ? APLIC_ENABLE_IDELIVERY : APLIC_DISABLE_IDELIVERY;
> + u32 th = (en) ? APLIC_ENABLE_ITHRESHOLD : APLIC_DISABLE_ITHRESHOLD;
> +
> + /* Priority must be less than threshold for interrupt triggering */
> + writel(th, idc->regs + APLIC_IDC_ITHRESHOLD);
> +
> + /* Delivery must be set to 1 for interrupt triggering */
> + writel(de, idc->regs + APLIC_IDC_IDELIVERY);
> +}
> +
> +static int aplic_idc_dying_cpu(unsigned int cpu)
> +{
> + if (aplic_idc_parent_irq)
> + disable_percpu_irq(aplic_idc_parent_irq);
> +
> + return 0;
> +}
> +
> +static int aplic_idc_starting_cpu(unsigned int cpu)
> +{
> + if (aplic_idc_parent_irq)
> + enable_percpu_irq(aplic_idc_parent_irq,
> + irq_get_trigger_type(aplic_idc_parent_irq));
> +
> + return 0;
> +}
> +
> +static int aplic_setup_idc(struct aplic_priv *priv)
> +{
> + int i, j, rc, cpu, setup_count = 0;
> + struct device_node *node = priv->dev->of_node;
> + struct device *dev = priv->dev;
> + struct of_phandle_args parent;
> + struct irq_domain *domain;
> + unsigned long hartid;
> + struct aplic_idc *idc;
> + u32 val;
> +
> + /* Setup per-CPU IDC and target CPU mask */
> + for (i = 0; i < priv->nr_idcs; i++) {
> + if (of_irq_parse_one(node, i, &parent)) {
> + dev_err(dev, "failed to parse parent for IDC%d.\n",
> + i);
> + return -EIO;
> + }
> +
> + /* Skip IDCs which do not connect to external interrupts */
> + if (parent.args[0] != RV_IRQ_EXT)
> + continue;
> +
> + rc = riscv_of_parent_hartid(parent.np, &hartid);
> + if (rc) {
> + dev_err(dev, "failed to parse hart ID for IDC%d.\n",
> + i);
> + return rc;
> + }
> +
> + cpu = riscv_hartid_to_cpuid(hartid);
> + if (cpu < 0) {
> + dev_warn(dev, "invalid cpuid for IDC%d\n", i);
> + continue;
> + }
> +
> + cpumask_set_cpu(cpu, &priv->lmask);
> +
> + idc = per_cpu_ptr(&aplic_idcs, cpu);
> + WARN_ON(idc->priv);
> +
> + idc->hart_index = i;
> + idc->regs = priv->regs + APLIC_IDC_BASE + i * APLIC_IDC_SIZE;
> + idc->priv = priv;
> +
> + aplic_idc_set_delivery(idc, true);
> +
> + /*
> + * Boot cpu might not have APLIC hart_index = 0 so check
> + * and update target registers of all interrupts.
> + */
> + if (cpu == smp_processor_id() && idc->hart_index) {
> + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK;
> + val <<= APLIC_TARGET_HART_IDX_SHIFT;
> + val |= APLIC_DEFAULT_PRIORITY;
> + for (j = 1; j <= priv->nr_irqs; j++)
> + writel(val, priv->regs + APLIC_TARGET_BASE +
> + (j - 1) * sizeof(u32));
> + }
> +
> + setup_count++;
> + }
> +
> + /* Find parent domain and register chained handler */
> + domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(),
> + DOMAIN_BUS_ANY);
> + if (!aplic_idc_parent_irq && domain) {
> + aplic_idc_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT);
> + if (aplic_idc_parent_irq) {
> + irq_set_chained_handler(aplic_idc_parent_irq,
> + aplic_idc_handle_irq);
> +
> + /*
> + * Setup CPUHP notifier to enable IDC parent
> + * interrupt on all CPUs
> + */
> + cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
> + "irqchip/riscv/aplic:starting",
> + aplic_idc_starting_cpu,
> + aplic_idc_dying_cpu);
> + }
> + }
> +
> + /* Fail if we were not able to setup IDC for any CPU */
> + return (setup_count) ? 0 : -ENODEV;
> +}
> +
> +static int aplic_probe(struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + struct device *dev = &pdev->dev;
> + struct aplic_priv *priv;
> + struct resource *regs;
> + phys_addr_t pa;
> + int rc;
> +
> + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!regs) {
> + dev_err(dev, "cannot find registers resource\n");
> + return -ENOENT;
> + }
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> + platform_set_drvdata(pdev, priv);
> + priv->dev = dev;
> +
> + priv->regs = devm_ioremap(dev, regs->start, resource_size(regs));
> + if (WARN_ON(!priv->regs)) {
> + dev_err(dev, "failed ioremap registers\n");
> + return -EIO;
> + }
> +
> + of_property_read_u32(node, "riscv,num-sources", &priv->nr_irqs);
> + if (!priv->nr_irqs) {
> + dev_err(dev, "failed to get number of interrupt sources\n");
> + return -EINVAL;
> + }
> +
> + /* Setup initial state APLIC interrupts */
> + aplic_init_hw_irqs(priv);
> +
> + /*
> + * Setup IDCs or MSIs based on parent interrupts in DT node
> + *
> + * If "msi-parent" DT property is present then we ignore the
> + * APLIC IDCs which forces the APLIC driver to use MSI mode.
> + */
> + priv->nr_idcs = of_property_read_bool(node, "msi-parent") ?
> + 0 : of_irq_count(node);
> + if (priv->nr_idcs)
> + rc = aplic_setup_idc(priv);
> + else
> + rc = aplic_setup_msi(priv);
> + if (rc)
> + return rc;
> +
> + /* Setup global config and interrupt delivery */
> + aplic_init_hw_global(priv);
> +
> + /* Create irq domain instance for the APLIC */
> + if (priv->nr_idcs)
> + priv->irqdomain = irq_domain_create_linear(
> + of_node_to_fwnode(node),
> + priv->nr_irqs + 1,
> + &aplic_irqdomain_idc_ops,
> + priv);
> + else
> + priv->irqdomain = platform_msi_create_device_domain(dev,
> + priv->nr_irqs + 1,
> + aplic_msi_write_msg,
> + &aplic_irqdomain_msi_ops,
> + priv);
> + if (!priv->irqdomain) {
> + dev_err(dev, "failed to add irq domain\n");
> + return -ENOMEM;
> + }
> +
> + /* Advertise the interrupt controller */
> + if (priv->nr_idcs) {
> + dev_info(dev, "%d interrupts directly connected to %d CPUs\n",
> + priv->nr_irqs, priv->nr_idcs);
> + } else {
> + pa = priv->msicfg.base_ppn << APLIC_xMSICFGADDR_PPN_SHIFT;
> + dev_info(dev, "%d interrupts forwared to MSI base %pa\n",
> + priv->nr_irqs, &pa);
> + }
> +
> + return 0;
> +}
> +
> +static int aplic_remove(struct platform_device *pdev)
> +{
> + struct aplic_priv *priv = platform_get_drvdata(pdev);
> +
> + irq_domain_remove(priv->irqdomain);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id aplic_match[] = {
> + { .compatible = "riscv,aplic" },
> + {}
> +};
> +
> +static struct platform_driver aplic_driver = {
> + .driver = {
> + .name = "riscv-aplic",
> + .of_match_table = aplic_match,
> + },
> + .probe = aplic_probe,
> + .remove = aplic_remove,
> +};
> +
> +static int __init aplic_init(void)
> +{
> + return platform_driver_register(&aplic_driver);
> +}
> +core_initcall(aplic_init);
> diff --git a/include/linux/irqchip/riscv-aplic.h b/include/linux/irqchip/riscv-aplic.h
> new file mode 100644
> index 000000000000..88177eefd411
> --- /dev/null
> +++ b/include/linux/irqchip/riscv-aplic.h
> @@ -0,0 +1,117 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2021 Western Digital Corporation or its affiliates.
> + * Copyright (C) 2022 Ventana Micro Systems Inc.
> + */
> +#ifndef __LINUX_IRQCHIP_RISCV_APLIC_H
> +#define __LINUX_IRQCHIP_RISCV_APLIC_H
> +
> +#include <linux/bitops.h>
> +
> +#define APLIC_MAX_IDC BIT(14)
> +#define APLIC_MAX_SOURCE 1024
> +
> +#define APLIC_DOMAINCFG 0x0000
> +#define APLIC_DOMAINCFG_RDONLY 0x80000000
> +#define APLIC_DOMAINCFG_IE BIT(8)
> +#define APLIC_DOMAINCFG_DM BIT(2)
> +#define APLIC_DOMAINCFG_BE BIT(0)
> +
> +#define APLIC_SOURCECFG_BASE 0x0004
> +#define APLIC_SOURCECFG_D BIT(10)
> +#define APLIC_SOURCECFG_CHILDIDX_MASK 0x000003ff
> +#define APLIC_SOURCECFG_SM_MASK 0x00000007
> +#define APLIC_SOURCECFG_SM_INACTIVE 0x0
> +#define APLIC_SOURCECFG_SM_DETACH 0x1
> +#define APLIC_SOURCECFG_SM_EDGE_RISE 0x4
> +#define APLIC_SOURCECFG_SM_EDGE_FALL 0x5
> +#define APLIC_SOURCECFG_SM_LEVEL_HIGH 0x6
> +#define APLIC_SOURCECFG_SM_LEVEL_LOW 0x7
> +
> +#define APLIC_MMSICFGADDR 0x1bc0
> +#define APLIC_MMSICFGADDRH 0x1bc4
> +#define APLIC_SMSICFGADDR 0x1bc8
> +#define APLIC_SMSICFGADDRH 0x1bcc
> +
> +#ifdef CONFIG_RISCV_M_MODE
> +#define APLIC_xMSICFGADDR APLIC_MMSICFGADDR
> +#define APLIC_xMSICFGADDRH APLIC_MMSICFGADDRH
> +#else
> +#define APLIC_xMSICFGADDR APLIC_SMSICFGADDR
> +#define APLIC_xMSICFGADDRH APLIC_SMSICFGADDRH
> +#endif
> +
> +#define APLIC_xMSICFGADDRH_L BIT(31)
> +#define APLIC_xMSICFGADDRH_HHXS_MASK 0x1f
> +#define APLIC_xMSICFGADDRH_HHXS_SHIFT 24
> +#define APLIC_xMSICFGADDRH_LHXS_MASK 0x7
> +#define APLIC_xMSICFGADDRH_LHXS_SHIFT 20
> +#define APLIC_xMSICFGADDRH_HHXW_MASK 0x7
> +#define APLIC_xMSICFGADDRH_HHXW_SHIFT 16
> +#define APLIC_xMSICFGADDRH_LHXW_MASK 0xf
> +#define APLIC_xMSICFGADDRH_LHXW_SHIFT 12
> +#define APLIC_xMSICFGADDRH_BAPPN_MASK 0xfff
> +
> +#define APLIC_xMSICFGADDR_PPN_SHIFT 12
> +
> +#define APLIC_xMSICFGADDR_PPN_HART(__lhxs) \
> + (BIT(__lhxs) - 1)
> +
> +#define APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) \
> + (BIT(__lhxw) - 1)
> +#define APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs) \
> + ((__lhxs))
> +#define APLIC_xMSICFGADDR_PPN_LHX(__lhxw, __lhxs) \
> + (APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) << \
> + APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs))
> +
> +#define APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) \
> + (BIT(__hhxw) - 1)
> +#define APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs) \
> + ((__hhxs) + APLIC_xMSICFGADDR_PPN_SHIFT)
> +#define APLIC_xMSICFGADDR_PPN_HHX(__hhxw, __hhxs) \
> + (APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) << \
> + APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs))
> +
> +#define APLIC_SETIP_BASE 0x1c00
> +#define APLIC_SETIPNUM 0x1cdc
> +
> +#define APLIC_CLRIP_BASE 0x1d00
> +#define APLIC_CLRIPNUM 0x1ddc
> +
> +#define APLIC_SETIE_BASE 0x1e00
> +#define APLIC_SETIENUM 0x1edc
> +
> +#define APLIC_CLRIE_BASE 0x1f00
> +#define APLIC_CLRIENUM 0x1fdc
> +
> +#define APLIC_SETIPNUM_LE 0x2000
> +#define APLIC_SETIPNUM_BE 0x2004
> +
> +#define APLIC_GENMSI 0x3000
> +
> +#define APLIC_TARGET_BASE 0x3004
> +#define APLIC_TARGET_HART_IDX_SHIFT 18
> +#define APLIC_TARGET_HART_IDX_MASK 0x3fff
> +#define APLIC_TARGET_GUEST_IDX_SHIFT 12
> +#define APLIC_TARGET_GUEST_IDX_MASK 0x3f
> +#define APLIC_TARGET_IPRIO_MASK 0xff
> +#define APLIC_TARGET_EIID_MASK 0x7ff
> +
> +#define APLIC_IDC_BASE 0x4000
> +#define APLIC_IDC_SIZE 32
> +
> +#define APLIC_IDC_IDELIVERY 0x00
> +
> +#define APLIC_IDC_IFORCE 0x04
> +
> +#define APLIC_IDC_ITHRESHOLD 0x08
> +
> +#define APLIC_IDC_TOPI 0x18
> +#define APLIC_IDC_TOPI_ID_SHIFT 16
> +#define APLIC_IDC_TOPI_ID_MASK 0x3ff
> +#define APLIC_IDC_TOPI_PRIO_MASK 0xff
> +
> +#define APLIC_IDC_CLAIMI 0x1c
> +
> +#endif
> --
> 2.34.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Powered by blists - more mailing lists