[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJhJPsX-c_05bzA6cvN5b5wubS=cJCcXvRcQNTqR2RUa6Y3ZFw@mail.gmail.com>
Date: Tue, 17 Jan 2023 18:54:00 +0800
From: Kelvin Cheung <keguang.zhang@...il.com>
To: Rob Herring <robh@...nel.org>
Cc: Michael Turquette <mturquette@...libre.com>,
linux-mips@...r.kernel.org, linux-clk@...r.kernel.org,
Stephen Boyd <sboyd@...nel.org>, linux-kernel@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Subject: Re: [PATCH 1/2] dt-bindings: clock: Add binding for Loongson-1 clock driver
Rob Herring <robh@...nel.org> 于2023年1月13日周五 23:26写道:
>
>
> On Fri, 13 Jan 2023 19:07:37 +0800, Keguang Zhang wrote:
> > Add devicetree binding document for the Loongson-1 clock driver.
> >
> > Signed-off-by: Keguang Zhang <keguang.zhang@...il.com>
> > ---
> > .../bindings/clock/loongson,ls1x-clk.yaml | 81 +++++++++++++++++++
> > 1 file changed, 81 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/clock/loongson,ls1x-clk.yaml
> >
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/clock/loongson,ls1x-clk.example.dts:36.39-41.15: Warning (unique_unit_address_if_enabled): /example-0/clocks/cpu_clk@...78034: duplicate unit-address (also used in node /example-0/clocks/ahb_clk@...78034)
I did notice this warning.
But my situation is the cpu_clk and ahb_clk share the same registers.
May I have your suggestion?
Thanks!
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230113110738.1505973-2-keguang.zhang@gmail.com
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
>
--
Best regards,
Kelvin Cheung
Powered by blists - more mailing lists