| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Y8aM4kTCphTfEszc@kuha.fi.intel.com>
Date: Tue, 17 Jan 2023 13:56:18 +0200
From: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
To: Bjorn Andersson <quic_bjorande@...cinc.com>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Bjorn Andersson <andersson@...nel.org>,
linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/2] usb: typec: mux: Introduce GPIO-based SBU mux
On Thu, Jan 12, 2023 at 08:11:15PM -0800, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@...aro.org>
>
> A design found in various Qualcomm-based boards is to use a USB switch,
> controlled through a pair of GPIO lines to connect, disconnect and
> switch the orientation of the SBU lines in USB Type-C applications.
>
> This introduces a generic driver, which implements the typec_switch and
> typec_mux interfaces to perform these operations.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
> ---
>
> Changes since v1:
> - Fixed "swapped" being uninitialized for TYPEC_ORIENTATION_NONE in switch_set
>
> drivers/usb/typec/mux/Kconfig | 6 +
> drivers/usb/typec/mux/Makefile | 1 +
> drivers/usb/typec/mux/gpio-sbu-mux.c | 172 +++++++++++++++++++++++++++
> 3 files changed, 179 insertions(+)
> create mode 100644 drivers/usb/typec/mux/gpio-sbu-mux.c
>
> diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
> index 5eb2c17d72c1..c46fa4f9d3df 100644
> --- a/drivers/usb/typec/mux/Kconfig
> +++ b/drivers/usb/typec/mux/Kconfig
> @@ -12,6 +12,12 @@ config TYPEC_MUX_FSA4480
> common USB Type-C connector.
> If compiled as a module, the module will be named fsa4480.
>
> +config TYPEC_MUX_GPIO_SBU
> + tristate "Generic GPIO based SBU mux for USB Type-C applications"
> + help
> + Say Y or M if your system uses a GPIO based mux for managing the
> + connected state and the swapping of the SBU lines in a Type-C port.
> +
> config TYPEC_MUX_PI3USB30532
> tristate "Pericom PI3USB30532 Type-C cross switch driver"
> depends on I2C
> diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile
> index e52a56c16bfb..dda67e19b58b 100644
> --- a/drivers/usb/typec/mux/Makefile
> +++ b/drivers/usb/typec/mux/Makefile
> @@ -1,5 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0
>
> obj-$(CONFIG_TYPEC_MUX_FSA4480) += fsa4480.o
> +obj-$(CONFIG_TYPEC_MUX_GPIO_SBU) += gpio-sbu-mux.o
> obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o
> obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o
> diff --git a/drivers/usb/typec/mux/gpio-sbu-mux.c b/drivers/usb/typec/mux/gpio-sbu-mux.c
> new file mode 100644
> index 000000000000..f62516dafe8f
> --- /dev/null
> +++ b/drivers/usb/typec/mux/gpio-sbu-mux.c
> @@ -0,0 +1,172 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2022 Linaro Ltd.
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/usb/typec_dp.h>
> +#include <linux/usb/typec_mux.h>
> +
> +struct gpio_sbu_mux {
> + struct gpio_desc *enable_gpio;
> + struct gpio_desc *select_gpio;
> +
> + struct typec_switch_dev *sw;
> + struct typec_mux_dev *mux;
> +
> + struct mutex lock; /* protect enabled and swapped */
> + bool enabled;
> + bool swapped;
> +};
> +
> +static int gpio_sbu_switch_set(struct typec_switch_dev *sw,
> + enum typec_orientation orientation)
> +{
> + struct gpio_sbu_mux *sbu_mux = typec_switch_get_drvdata(sw);
> + bool enabled;
> + bool swapped;
> +
> + mutex_lock(&sbu_mux->lock);
> +
> + enabled = sbu_mux->enabled;
> + swapped = sbu_mux->swapped;
> +
> + switch (orientation) {
> + case TYPEC_ORIENTATION_NONE:
> + enabled = false;
> + break;
> + case TYPEC_ORIENTATION_NORMAL:
> + swapped = false;
> + break;
> + case TYPEC_ORIENTATION_REVERSE:
> + swapped = true;
> + break;
> + }
> +
> + if (enabled != sbu_mux->enabled)
> + gpiod_set_value(sbu_mux->enable_gpio, enabled);
> +
> + if (swapped != sbu_mux->swapped)
> + gpiod_set_value(sbu_mux->select_gpio, swapped);
> +
> + sbu_mux->enabled = enabled;
> + sbu_mux->swapped = swapped;
> +
> + mutex_unlock(&sbu_mux->lock);
> +
> + return 0;
> +}
> +
> +static int gpio_sbu_mux_set(struct typec_mux_dev *mux,
> + struct typec_mux_state *state)
> +{
> + struct gpio_sbu_mux *sbu_mux = typec_mux_get_drvdata(mux);
> +
> + mutex_lock(&sbu_mux->lock);
> +
> + switch (state->mode) {
> + case TYPEC_STATE_SAFE:
> + case TYPEC_STATE_USB:
> + sbu_mux->enabled = false;
> + break;
> + case TYPEC_DP_STATE_C:
> + case TYPEC_DP_STATE_D:
> + case TYPEC_DP_STATE_E:
> + sbu_mux->enabled = true;
> + break;
> + default:
> + break;
> + }
> +
> + gpiod_set_value(sbu_mux->enable_gpio, sbu_mux->enabled);
> +
> + mutex_unlock(&sbu_mux->lock);
> +
> + return 0;
> +}
> +
> +static int gpio_sbu_mux_probe(struct platform_device *pdev)
> +{
> + struct typec_switch_desc sw_desc = { };
> + struct typec_mux_desc mux_desc = { };
> + struct device *dev = &pdev->dev;
> + struct gpio_sbu_mux *sbu_mux;
> +
> + sbu_mux = devm_kzalloc(dev, sizeof(*sbu_mux), GFP_KERNEL);
> + if (!sbu_mux)
> + return -ENOMEM;
> +
> + mutex_init(&sbu_mux->lock);
> +
> + sbu_mux->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(sbu_mux->enable_gpio))
> + return dev_err_probe(dev, PTR_ERR(sbu_mux->enable_gpio),
> + "unable to acquire enable gpio\n");
> +
> + sbu_mux->select_gpio = devm_gpiod_get(dev, "select", GPIOD_OUT_LOW);
> + if (IS_ERR(sbu_mux->select_gpio))
> + return dev_err_probe(dev, PTR_ERR(sbu_mux->select_gpio),
> + "unable to acquire select gpio\n");
> +
> + sw_desc.drvdata = sbu_mux;
> + sw_desc.fwnode = dev_fwnode(dev);
> + sw_desc.set = gpio_sbu_switch_set;
> +
> + sbu_mux->sw = typec_switch_register(dev, &sw_desc);
> + if (IS_ERR(sbu_mux->sw))
> + return dev_err_probe(dev, PTR_ERR(sbu_mux->sw),
> + "failed to register typec switch\n");
> +
> + mux_desc.drvdata = sbu_mux;
> + mux_desc.fwnode = dev_fwnode(dev);
> + mux_desc.set = gpio_sbu_mux_set;
> +
> + sbu_mux->mux = typec_mux_register(dev, &mux_desc);
> + if (IS_ERR(sbu_mux->mux)) {
> + typec_switch_unregister(sbu_mux->sw);
> + return dev_err_probe(dev, PTR_ERR(sbu_mux->mux),
> + "failed to register typec mux\n");
> + }
> +
> + platform_set_drvdata(pdev, sbu_mux);
> +
> + return 0;
> +}
> +
> +static int gpio_sbu_mux_remove(struct platform_device *pdev)
> +{
> + struct gpio_sbu_mux *sbu_mux = platform_get_drvdata(pdev);
> +
> + gpiod_set_value(sbu_mux->enable_gpio, 0);
> +
> + typec_mux_unregister(sbu_mux->mux);
> + typec_switch_unregister(sbu_mux->sw);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id gpio_sbu_mux_match[] = {
> + { .compatible = "gpio-sbu-mux", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, gpio_sbu_mux_match);
> +
> +static struct platform_driver gpio_sbu_mux_driver = {
> + .probe = gpio_sbu_mux_probe,
> + .remove = gpio_sbu_mux_remove,
> + .driver = {
> + .name = "gpio_sbu_mux",
> + .of_match_table = gpio_sbu_mux_match,
> + },
> +};
> +module_platform_driver(gpio_sbu_mux_driver);
> +
> +MODULE_DESCRIPTION("GPIO based SBU mux driver");
> +MODULE_LICENSE("GPL");
> --
> 2.37.3
--
heikki
Powered by blists - more mailing lists