[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <cc820b4b-d3b7-9972-a07f-0c9f94f8d175@linaro.org>
Date: Wed, 18 Jan 2023 18:07:47 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Jan Kiszka <jan.kiszka@...mens.com>, Nishanth Menon <nm@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, Bao Cheng Su <baocheng.su@...mens.com>,
Chao Zeng <chao.zeng@...mens.com>
Subject: Re: [PATCH 3/3] arm64: dts: ti: iot2050: Add support for M.2 variant
On 18/01/2023 17:28, Jan Kiszka wrote:
> From: chao zeng <chao.zeng@...mens.com>
>
> The M.2 variant comes with 2 slots, one B-keyed and another one E-keyed.
> They are configured by the firmware during startup. Also the device tree
> will be adjusted according to the detect or manually configured
> interface mode by the firmware. The kernel only carries a single
> configuration as base device tree. It has to be built with a symbols
> node so that the firmware can apply overlays for the connector modes.
>
> Signed-off-by: chao zeng <chao.zeng@...mens.com>
> [Jan: refactored to a single DT]
> Signed-off-by: Jan Kiszka <jan.kiszka@...mens.com>
> ---
> arch/arm64/boot/dts/ti/Makefile | 3 +
> .../dts/ti/k3-am6548-iot2050-advanced-m2.dts | 122 ++++++++++++++++++
> 2 files changed, 125 insertions(+)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
>
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index cf7c509538a4..13e79bf7e804 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -11,6 +11,9 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
> +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
This does not look like proper order.
> +
> +DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
>
Best regards,
Krzysztof
Powered by blists - more mailing lists