Message-ID: <CAJuCfpHZuKq45FL1gs+=rx5s2AOaZ9TPC1bdAWjYzfkrOABTOw@mail.gmail.com>
Date:   Wed, 18 Jan 2023 11:01:08 -0800
From:   Suren Baghdasaryan <surenb@...gle.com>
To:     paulmck@...nel.org
Cc:     Michal Hocko <mhocko@...e.com>, akpm@...ux-foundation.org,
        michel@...pinasse.org, jglisse@...gle.com, vbabka@...e.cz,
        hannes@...xchg.org, mgorman@...hsingularity.net, dave@...olabs.net,
        willy@...radead.org, liam.howlett@...cle.com, peterz@...radead.org,
        ldufour@...ux.ibm.com, laurent.dufour@...ibm.com, luto@...nel.org,
        songliubraving@...com, peterx@...hat.com, david@...hat.com,
        dhowells@...hat.com, hughd@...gle.com, bigeasy@...utronix.de,
        kent.overstreet@...ux.dev, punit.agrawal@...edance.com,
        lstoakes@...il.com, peterjung1337@...il.com, rientjes@...gle.com,
        axelrasmussen@...gle.com, joelaf@...gle.com, minchan@...gle.com,
        jannh@...gle.com, shakeelb@...gle.com, tatashin@...gle.com,
        edumazet@...gle.com, gthelen@...gle.com, gurua@...gle.com,
        arjunroy@...gle.com, soheil@...gle.com, hughlynch@...gle.com,
        leewalsh@...gle.com, posk@...gle.com, linux-mm@...ck.org,
        linux-arm-kernel@...ts.infradead.org,
        linuxppc-dev@...ts.ozlabs.org, x86@...nel.org,
        linux-kernel@...r.kernel.org, kernel-team@...roid.com
Subject: Re: [PATCH 39/41] kernel/fork: throttle call_rcu() calls in vm_area_free

On Wed, Jan 18, 2023 at 10:34 AM Paul E. McKenney <paulmck@...nel.org> wrote:
>
> On Wed, Jan 18, 2023 at 10:04:39AM -0800, Suren Baghdasaryan wrote:
> > On Wed, Jan 18, 2023 at 1:49 AM Michal Hocko <mhocko@...e.com> wrote:
> > >
> > > On Tue 17-01-23 17:19:46, Suren Baghdasaryan wrote:
> > > > On Tue, Jan 17, 2023 at 7:57 AM Michal Hocko <mhocko@...e.com> wrote:
> > > > >
> > > > > On Mon 09-01-23 12:53:34, Suren Baghdasaryan wrote:
> > > > > > call_rcu() can take a long time when callback offloading is enabled.
> > > > > > Its use in the vm_area_free can cause regressions in the exit path when
> > > > > > multiple VMAs are being freed.
> > > > >
> > > > > What kind of regressions.
> > > > >
> > > > > > To minimize that impact, place VMAs into
> > > > > > a list and free them in groups using one call_rcu() call per group.
> > > > >
> > > > > Please add some data to justify this additional complexity.
> > > >
> > > > Sorry, should have done that in the first place. A 4.3% regression was
> > > > noticed when running execl test from unixbench suite. spawn test also
> > > > showed 1.6% regression. Profiling revealed that vma freeing was taking
> > > > longer due to call_rcu() which is slow when RCU callback offloading is
> > > > enabled.
> > >
> > > Could you be more specific? vma freeing is async with the RCU so how
> > > come this has resulted in a regression? Is there any heavy
> > > rcu_synchronize in the exec path? That would be an interesting
> > > information.
> >
> > No, there is no heavy rcu_synchronize() or any other additional
> > synchronous load in the exit path. It's the call_rcu() which can block
> > the caller if CONFIG_RCU_NOCB_CPU is enabled and there are lots of
> > other call_rcu()'s going on in parallel. Note that call_rcu() calls
> > rcu_nocb_try_bypass() if CONFIG_RCU_NOCB_CPU is enabled and profiling
> > revealed that this function was taking multiple ms (don't recall the
> > actual number, sorry). Paul's explanation implied that this happens
> > due to contention on the locks taken in this function. For more
> > in-depth details I'll have to ask Paul for help :) This code is quite
> > complex and I don't know all the details of RCU implementation.
>
> There are a couple of possibilities here.
>
> First, if I am remembering correctly, the time between the call_rcu()
> and invocation of the corresponding callback was taking multiple seconds,
> but that was because the kernel was built with CONFIG_LAZY_RCU=y in
> order to save power by batching RCU work over multiple call_rcu()
> invocations.  If this is causing a problem for a given call site, the
> shiny new call_rcu_hurry() can be used instead.  Doing this gets back
> to the old-school non-laziness, but can of course consume more power.

That would not be the case because CONFIG_LAZY_RCU was not an option
at the time I was profiling this issue.
Laxy RCU would be a great option to replace this patch but
unfortunately it's not the default behavior, so I would still have to
implement this batching in case lazy RCU is not enabled.

>
> Second, there is a much shorter one-jiffy delay between the call_rcu()
> and the invocation of the corresponding callback in kernels built with
> either CONFIG_NO_HZ_FULL=y (but only on CPUs mentioned in the nohz_full
> or rcu_nocbs kernel boot parameters) or CONFIG_RCU_NOCB_CPU=y (but only
> on CPUs mentioned in the rcu_nocbs kernel boot parameters).  The purpose
> of this delay is to avoid lock contention, and so this delay is incurred
> only on CPUs that are queuing callbacks at a rate exceeding 16K/second.
> This is reduced to a per-jiffy limit, so on a HZ=1000 system, a CPU
> invoking call_rcu() at least 16 times within a given jiffy will incur
> the added delay.  The reason for this delay is the use of a separate
> ->nocb_bypass list.  As Suren says, this bypass list is used to reduce
> lock contention on the main ->cblist.  This is not needed in old-school
> kernels built without either CONFIG_NO_HZ_FULL=y or CONFIG_RCU_NOCB_CPU=y
> (including most datacenter kernels) because in that case the callbacks
> enqueued by call_rcu() are touched only by the corresponding CPU, so
> that there is no need for locks.

I believe this is the reason in my profiled case.

>
> Third, if you are instead seeing multiple milliseconds of CPU consumed by
> call_rcu() in the common case (for example, without the aid of interrupts,
> NMIs, or SMIs), please do let me know.  That sounds to me like a bug.

I don't think I've seen such a case.
Thanks for clarifications, Paul!

>
> Or have I lost track of some other slow case?
>
>                                                         Thanx, Paul

Powered by blists - more mailing lists