| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230118205006.3182907-7-kan.liang@linux.intel.com>
Date: Wed, 18 Jan 2023 12:50:05 -0800
From: kan.liang@...ux.intel.com
To: joro@...tes.org, will@...nel.org, baolu.lu@...ux.intel.com,
dwmw2@...radead.org, robin.murphy@....com, robert.moore@...el.com,
rafael.j.wysocki@...el.com, lenb@...nel.org, iommu@...ts.linux.dev,
linux-kernel@...r.kernel.org
Cc: Kan Liang <kan.liang@...ux.intel.com>
Subject: [PATCH V2 6/7] iommu/vt-d: Add IOMMU perfmon overflow handler support
From: Kan Liang <kan.liang@...ux.intel.com>
While enabled to count events and an event occurrence causes the counter
value to increment and roll over to or past zero, this is termed a
counter overflow. The overflow can trigger an interrupt. The IOMMU
perfmon needs to handle the case properly.
New HW IRQs are allocated for each IOMMU device for perfmon. The IRQ IDs
are after the SVM range.
In the overflow handler, the counter is not frozen. It's very unlikely
that the same counter overflows again during the period. But it's
possible that other counters overflow at the same time. Read the
overflow register at the end of the handler and check whether there are
more.
Signed-off-by: Kan Liang <kan.liang@...ux.intel.com>
---
drivers/iommu/intel/dmar.c | 2 +
drivers/iommu/intel/iommu.h | 11 ++++-
drivers/iommu/intel/perfmon.c | 82 +++++++++++++++++++++++++++++++++++
drivers/iommu/intel/svm.c | 2 +-
4 files changed, 95 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c
index 0f3401428d0e..c557c61a28ee 100644
--- a/drivers/iommu/intel/dmar.c
+++ b/drivers/iommu/intel/dmar.c
@@ -1879,6 +1879,8 @@ static inline int dmar_msi_reg(struct intel_iommu *iommu, int irq)
return DMAR_FECTL_REG;
else if (iommu->pr_irq == irq)
return DMAR_PECTL_REG;
+ else if (iommu->perf_irq == irq)
+ return DMAR_PERFINTRCTL_REG;
else
BUG();
}
diff --git a/drivers/iommu/intel/iommu.h b/drivers/iommu/intel/iommu.h
index 839b8d2046e4..c85eff192f7d 100644
--- a/drivers/iommu/intel/iommu.h
+++ b/drivers/iommu/intel/iommu.h
@@ -130,6 +130,8 @@
#define DMAR_PERFCFGOFF_REG 0x310
#define DMAR_PERFOVFOFF_REG 0x318
#define DMAR_PERFCNTROFF_REG 0x31c
+#define DMAR_PERFINTRSTS_REG 0x324
+#define DMAR_PERFINTRCTL_REG 0x328
#define DMAR_PERFEVNTCAP_REG 0x380
#define DMAR_ECMD_REG 0x400
#define DMAR_ECEO_REG 0x408
@@ -357,6 +359,9 @@
#define DMA_VCS_PAS ((u64)1)
+/* PERFINTRSTS_REG */
+#define DMA_PERFINTRSTS_PIS ((u32)1)
+
#define IOMMU_WAIT_OP(iommu, offset, op, cond, sts) \
do { \
cycles_t start_time = get_cycles(); \
@@ -630,8 +635,12 @@ struct iommu_pmu {
struct pmu pmu;
DECLARE_BITMAP(used_mask, IOMMU_PMU_IDX_MAX);
struct perf_event *event_list[IOMMU_PMU_IDX_MAX];
+ unsigned char irq_name[16];
};
+#define IOMMU_IRQ_ID_OFFSET_PRQ (DMAR_UNITS_SUPPORTED)
+#define IOMMU_IRQ_ID_OFFSET_PERF (2 * DMAR_UNITS_SUPPORTED)
+
struct intel_iommu {
void __iomem *reg; /* Pointer to hardware regs, virtual addr */
u64 reg_phys; /* physical address of hw register set */
@@ -645,7 +654,7 @@ struct intel_iommu {
int seq_id; /* sequence id of the iommu */
int agaw; /* agaw of this iommu */
int msagaw; /* max sagaw of this iommu */
- unsigned int irq, pr_irq;
+ unsigned int irq, pr_irq, perf_irq;
u16 segment; /* PCI segment# */
unsigned char name[13]; /* Device Name */
diff --git a/drivers/iommu/intel/perfmon.c b/drivers/iommu/intel/perfmon.c
index ed06bf121b50..9bfbf8dde495 100644
--- a/drivers/iommu/intel/perfmon.c
+++ b/drivers/iommu/intel/perfmon.c
@@ -486,6 +486,49 @@ static void iommu_pmu_disable(struct pmu *pmu)
ecmd_submit_sync(iommu, DMA_ECMD_FREEZE, 0, 0);
}
+static void iommu_pmu_counter_overflow(struct iommu_pmu *iommu_pmu)
+{
+ struct perf_event *event;
+ u64 status;
+ int i;
+
+ /*
+ * Two counters may be overflowed very close. Always check
+ * whether there are more to handle.
+ */
+ while ((status = dmar_readq(iommu_pmu->overflow))) {
+ for_each_set_bit(i, (unsigned long *)&status, iommu_pmu->num_cntr) {
+ /*
+ * Find the assigned event of the counter.
+ * Accumulate the value into the event->count.
+ */
+ event = iommu_pmu->event_list[i];
+ if (!event) {
+ pr_warn_once("Cannot find the assigned event for counter %d\n", i);
+ continue;
+ }
+ iommu_pmu_event_update(event);
+ }
+
+ dmar_writeq(iommu_pmu->overflow, status);
+ }
+}
+
+static irqreturn_t iommu_pmu_irq_handler(int irq, void *dev_id)
+{
+ struct intel_iommu *iommu = dev_id;
+
+ if (!dmar_readl(iommu->reg + DMAR_PERFINTRSTS_REG))
+ return IRQ_NONE;
+
+ iommu_pmu_counter_overflow(iommu->pmu);
+
+ /* Clear the status bit */
+ dmar_writel(iommu->reg + DMAR_PERFINTRSTS_REG, DMA_PERFINTRSTS_PIS);
+
+ return IRQ_HANDLED;
+}
+
static int __iommu_pmu_register(struct intel_iommu *iommu)
{
struct iommu_pmu *iommu_pmu = iommu->pmu;
@@ -681,6 +724,38 @@ void free_iommu_pmu(struct intel_iommu *iommu)
iommu->pmu = NULL;
}
+static int iommu_pmu_set_interrupt(struct intel_iommu *iommu)
+{
+ struct iommu_pmu *iommu_pmu = iommu->pmu;
+ int irq, ret;
+
+ irq = dmar_alloc_hwirq(IOMMU_IRQ_ID_OFFSET_PERF + iommu->seq_id, iommu->node, iommu);
+ if (irq <= 0)
+ return -EINVAL;
+
+ snprintf(iommu_pmu->irq_name, sizeof(iommu_pmu->irq_name), "dmar%d-perf", iommu->seq_id);
+
+ iommu->perf_irq = irq;
+ ret = request_threaded_irq(irq, NULL, iommu_pmu_irq_handler,
+ IRQF_ONESHOT, iommu_pmu->irq_name, iommu);
+ if (ret) {
+ dmar_free_hwirq(irq);
+ iommu->perf_irq = 0;
+ return ret;
+ }
+ return 0;
+}
+
+static void iommu_pmu_unset_interrupt(struct intel_iommu *iommu)
+{
+ if (!iommu->perf_irq)
+ return;
+
+ free_irq(iommu->perf_irq, iommu);
+ dmar_free_hwirq(iommu->perf_irq);
+ iommu->perf_irq = 0;
+}
+
static int iommu_pmu_cpu_online(unsigned int cpu)
{
if (cpumask_empty(&iommu_pmu_cpu_mask))
@@ -757,8 +832,14 @@ void iommu_pmu_register(struct intel_iommu *iommu)
if (iommu_pmu_cpuhp_setup(iommu_pmu))
goto unregister;
+ /* Set interrupt for overflow */
+ if (iommu_pmu_set_interrupt(iommu))
+ goto cpuhp_free;
+
return;
+cpuhp_free:
+ iommu_pmu_cpuhp_free(iommu_pmu);
unregister:
perf_pmu_unregister(&iommu_pmu->pmu);
err:
@@ -773,6 +854,7 @@ void iommu_pmu_unregister(struct intel_iommu *iommu)
if (!iommu_pmu)
return;
+ iommu_pmu_unset_interrupt(iommu);
iommu_pmu_cpuhp_free(iommu_pmu);
perf_pmu_unregister(&iommu_pmu->pmu);
}
diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
index c76b66263467..b6c5edd80d5d 100644
--- a/drivers/iommu/intel/svm.c
+++ b/drivers/iommu/intel/svm.c
@@ -79,7 +79,7 @@ int intel_svm_enable_prq(struct intel_iommu *iommu)
}
iommu->prq = page_address(pages);
- irq = dmar_alloc_hwirq(DMAR_UNITS_SUPPORTED + iommu->seq_id, iommu->node, iommu);
+ irq = dmar_alloc_hwirq(IOMMU_IRQ_ID_OFFSET_PRQ + iommu->seq_id, iommu->node, iommu);
if (irq <= 0) {
pr_err("IOMMU: %s: Failed to create IRQ vector for page request queue\n",
iommu->name);
--
2.35.1
Powered by blists - more mailing lists