[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y8hjy8WRpPh8DVvG@linaro.org>
Date: Wed, 18 Jan 2023 23:25:31 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: Johan Hovold <johan@...nel.org>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
"vkoul@...nel.org" <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
devicetree@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 1/8] dt-bindings: phy: Add QMP PCIe PHY comptible for
SM8550
On 23-01-18 17:45:16, Johan Hovold wrote:
> On Wed, Jan 18, 2023 at 02:53:21AM +0200, Abel Vesa wrote:
> > Document the QMP PCIe PHY compatible for SM8550.
> >
> > Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
> > ---
> > .../devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> > index 8a85318d9c92..65f26cfff3fb 100644
> > --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> > @@ -20,6 +20,8 @@ properties:
> > - qcom,sc8280xp-qmp-gen3x2-pcie-phy
> > - qcom,sc8280xp-qmp-gen3x4-pcie-phy
> > - qcom,sm8350-qmp-gen3x1-pcie-phy
> > + - qcom,sm8550-qmp-gen3x2-pcie-phy
> > + - qcom,sm8550-qmp-gen4x2-pcie-phy
> >
> > reg:
> > minItems: 1
>
> I don't think I'll have time to look at this week, but I did notice that
> you fail do describe the clocks, regulators, and resets (as you also
> did for the UFS PHY binding) which are currently different from
> sc8280xp.
Hmm, sorry about that. I will double check against the pcie phy nodes I
have for sm8550.
As for the UFS, if your are referring to the following patchset [1], the phy
node looks exactly the same as on sc8280xp, therefore no other binding
update, other than compatible, was needed.
[1] https://lore.kernel.org/all/20230117224148.1914627-2-abel.vesa@linaro.org/
>
> Please be more careful when adding compatible strings so we get this
> right. You should also double check that the differences are really
> warranted and not just due the vendor using different names for the same
> resource.
>
> At least the reset must be renamed ("pcie_1_nocsr_com_phy_reset", e.g.
> drop 'pcie' and 'reset', maybe more).
>
> Johan
Powered by blists - more mailing lists