linux-kernel - Re: [PATCH net-next 2/2] net: mdio: add amlogic gxl mdio mux support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <Y8dhUwIMb4tTeqWN@lunn.ch>
Date:   Wed, 18 Jan 2023 04:02:43 +0100
From:   Andrew Lunn <andrew@...n.ch>
To:     Jerome Brunet <jbrunet@...libre.com>
Cc:     netdev@...r.kernel.org, "David S. Miller" <davem@...emloft.net>,
        linux-amlogic@...ts.infradead.org,
        Kevin Hilman <khilman@...libre.com>,
        Neil Armstrong <neil.armstrong@...aro.org>,
        Da Xue <da@...sconfused.com>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next 2/2] net: mdio: add amlogic gxl mdio mux support

> +static int gxl_enable_internal_mdio(struct gxl_mdio_mux *priv)
> +{
> +	u32 val;
> +
> + 	/* Setup the internal phy */
> +	val = (REG3_ENH |
> +	       FIELD_PREP(REG3_CFGMODE, 0x7) |
> +	       REG3_AUTOMDIX |
> +	       FIELD_PREP(REG3_PHYADDR, 8) |
> +	       REG3_LEDPOL |
> +	       REG3_PHYMDI |
> +	       REG3_CLKINEN |
> +	       REG3_PHYIP);
> +
> +	writel_relaxed(REG4_PWRUPRSTSIG, priv->regs + ETH_REG4);
> +	writel_relaxed(val, priv->regs + ETH_REG3);
> +	mdelay(10);

Probably the second _relaxed() should not be. You want it guaranteed
to be written out before you do the mdelay().

> +
> +	/* Set the internal phy id */
> +	writel_relaxed(FIELD_PREP(REG2_PHYID, 0x110181),
> +		       priv->regs + ETH_REG2);

So how does this play with what Heiner has been reporting recently?
What is the reset default? Who determined this value?

> +	/* Enable the internal phy */
> +	val |= REG3_PHYEN;
> +	writel_relaxed(val, priv->regs + ETH_REG3);
> +	writel_relaxed(0, priv->regs + ETH_REG4);
> +
> +	/* The phy needs a bit of time to come up */
> +	mdelay(10);

What do you mean by 'come up'? Not link up i assume. But maybe it will
not respond to MDIO requests?

    Andrew