[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230118003834.2330028-2-abel.vesa@linaro.org>
Date: Wed, 18 Jan 2023 02:38:28 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
"vkoul@...nel.org" <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
devicetree@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Johan Hovold <johan@...nel.org>
Subject: [PATCH v2 1/7] phy: qcom-qmp: pcs: Add v6 register offsets
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS offsets in a dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h | 16 ++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 2 ++
2 files changed, 18 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
new file mode 100644
index 000000000000..18c4a3abe590
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V6_H_
+#define QCOM_PHY_QMP_PCS_V6_H_
+
+/* Only for QMP V6 PHY - USB/PCIe PCS registers */
+#define QPHY_V6_PCS_REFGEN_REQ_CONFIG1 0xdc
+#define QPHY_V6_PCS_RX_SIGDET_LVL 0x188
+#define QPHY_V6_PCS_RATE_SLEW_CNTRL1 0x198
+#define QPHY_V6_PCS_EQ_CONFIG2 0x1e0
+#define QPHY_V6_PCS_PCS_TX_RX_CONFIG 0x1d0
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index a63a691b8372..80e3b5c860b6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -38,6 +38,8 @@
#include "phy-qcom-qmp-pcs-v5_20.h"
+#include "phy-qcom-qmp-pcs-v6.h"
+
/* Only for QMP V3 & V4 PHY - DP COM registers */
#define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00
#define QPHY_V3_DP_COM_SW_RESET 0x04
--
2.34.1
Powered by blists - more mailing lists