| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230118100410.8834-5-hkelam@marvell.com>
Date: Wed, 18 Jan 2023 15:34:09 +0530
From: Hariprasad Kelam <hkelam@...vell.com>
To: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <kuba@...nel.org>, <davem@...emloft.net>, <pabeni@...hat.com>,
<edumazet@...gle.com>, <sgoutham@...vell.com>,
<lcherian@...vell.com>, <gakula@...vell.com>, <jerinj@...vell.com>,
<sbhatta@...vell.com>, <jhs@...atatu.com>,
<xiyou.wangcong@...il.com>, <jiri@...nulli.us>,
<saeedm@...dia.com>, <richardcochran@...il.com>,
<maximmi@...dia.com>, <tariqt@...dia.com>, <moshet@...dia.com>,
<linux-rdma@...r.kernel.org>, <maxtram95@...il.com>
Subject: [net-next Patch v2 4/5] octeontx2-pf: Add devlink support to configure TL1 RR_PRIO
All VFs and PF netdev shares same TL1 schedular, each interface
PF or VF will have different TL2 schedulars having same parent
TL1. The TL1 RR_PRIO value is static and PF/VFs use the same value
to configure its TL2 node priority in case of DWRR children.
This patch adds support to configure TL1 RR_PRIO value using devlink.
The TL1 RR_PRIO can be configured for each PF. The VFs are not allowed
to configure TL1 RR_PRIO value. The VFs can get the RR_PRIO value from
the mailbox NIX_TXSCH_ALLOC response parameter aggr_lvl_rr_prio.
Signed-off-by: Hariprasad Kelam <hkelam@...vell.com>
---
.../ethernet/marvell/octeontx2/af/common.h | 2 +-
.../net/ethernet/marvell/octeontx2/af/mbox.h | 9 ++-
.../net/ethernet/marvell/octeontx2/af/rvu.c | 15 ++++
.../net/ethernet/marvell/octeontx2/af/rvu.h | 1 +
.../ethernet/marvell/octeontx2/af/rvu_nix.c | 39 +++++++++-
.../marvell/octeontx2/nic/otx2_common.c | 9 ++-
.../marvell/octeontx2/nic/otx2_common.h | 1 +
.../marvell/octeontx2/nic/otx2_devlink.c | 78 +++++++++++++++++++
8 files changed, 147 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/common.h b/drivers/net/ethernet/marvell/octeontx2/af/common.h
index 8931864ee110..f5bf719a6ccf 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/common.h
@@ -142,7 +142,7 @@ enum nix_scheduler {
#define TXSCH_RR_QTM_MAX ((1 << 24) - 1)
#define TXSCH_TL1_DFLT_RR_QTM TXSCH_RR_QTM_MAX
-#define TXSCH_TL1_DFLT_RR_PRIO (0x1ull)
+#define TXSCH_TL1_DFLT_RR_PRIO (0x7ull)
#define CN10K_MAX_DWRR_WEIGHT 16384 /* Weight is 14bit on CN10K */
/* Min/Max packet sizes, excluding FCS */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index 94e743b5b545..6f0199766d5a 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -84,7 +84,7 @@ struct mbox_msghdr {
#define OTX2_MBOX_REQ_SIG (0xdead)
#define OTX2_MBOX_RSP_SIG (0xbeef)
u16 sig; /* Signature, for validating corrupted msgs */
-#define OTX2_MBOX_VERSION (0x000a)
+#define OTX2_MBOX_VERSION (0x000b)
u16 ver; /* Version of msg's structure for this ID */
u16 next_msgoff; /* Offset of next msg within mailbox region */
int rc; /* Msg process'ed response code */
@@ -299,6 +299,7 @@ M(NIX_BANDPROF_GET_HWINFO, 0x801f, nix_bandprof_get_hwinfo, msg_req, \
nix_bandprof_get_hwinfo_rsp) \
M(NIX_READ_INLINE_IPSEC_CFG, 0x8023, nix_read_inline_ipsec_cfg, \
msg_req, nix_inline_ipsec_cfg) \
+M(NIX_TL1_RR_PRIO, 0x8025, nix_tl1_rr_prio, nix_tl1_rr_prio_req, msg_rsp) \
/* MCS mbox IDs (range 0xA000 - 0xBFFF) */ \
M(MCS_ALLOC_RESOURCES, 0xa000, mcs_alloc_resources, mcs_alloc_rsrc_req, \
mcs_alloc_rsrc_rsp) \
@@ -825,6 +826,7 @@ enum nix_af_status {
NIX_AF_ERR_CQ_CTX_WRITE_ERR = -429,
NIX_AF_ERR_AQ_CTX_RETRY_WRITE = -430,
NIX_AF_ERR_LINK_CREDITS = -431,
+ NIX_AF_ERR_TL1_RR_PRIO_PERM_DENIED = -433,
};
/* For NIX RX vtag action */
@@ -1269,6 +1271,11 @@ struct nix_bandprof_get_hwinfo_rsp {
u32 policer_timeunit;
};
+struct nix_tl1_rr_prio_req {
+ struct mbox_msghdr hdr;
+ u8 tl1_rr_prio;
+};
+
/* NPC mbox message structs */
#define NPC_MCAM_ENTRY_INVALID 0xFFFF
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
index 3f5e09b77d4b..7d2230359bf0 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
@@ -808,6 +808,18 @@ static void rvu_setup_pfvf_macaddress(struct rvu *rvu)
}
}
+static void rvu_setup_pfvf_aggr_lvl_rr_prio(struct rvu *rvu)
+{
+ struct rvu_hwinfo *hw = rvu->hw;
+ struct rvu_pfvf *pfvf;
+ int pf;
+
+ for (pf = 0; pf < hw->total_pfs; pf++) {
+ pfvf = &rvu->pf[pf];
+ pfvf->tl1_rr_prio = TXSCH_TL1_DFLT_RR_PRIO;
+ }
+}
+
static int rvu_fwdata_init(struct rvu *rvu)
{
u64 fwdbase;
@@ -1136,6 +1148,9 @@ static int rvu_setup_hw_resources(struct rvu *rvu)
/* Assign MACs for CGX mapped functions */
rvu_setup_pfvf_macaddress(rvu);
+ /* Assign aggr level RR Priority */
+ rvu_setup_pfvf_aggr_lvl_rr_prio(rvu);
+
err = rvu_npa_init(rvu);
if (err) {
dev_err(rvu->dev, "%s: Failed to initialize npa\n", __func__);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index 7f0a64731c67..eec890f98803 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -254,6 +254,7 @@ struct rvu_pfvf {
u64 lmt_map_ent_w1; /* Preseving the word1 of lmtst map table entry*/
unsigned long flags;
struct sdp_node_info *sdp_info;
+ u8 tl1_rr_prio; /* RR PRIORITY set by PF */
};
enum rvu_pfvf_flags {
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index c11859999074..ef9f62aa6e2b 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -2001,6 +2001,7 @@ int rvu_mbox_handler_nix_txsch_alloc(struct rvu *rvu,
{
struct rvu_hwinfo *hw = rvu->hw;
u16 pcifunc = req->hdr.pcifunc;
+ struct rvu_pfvf *parent_pf;
int link, blkaddr, rc = 0;
int lvl, idx, start, end;
struct nix_txsch *txsch;
@@ -2017,6 +2018,8 @@ int rvu_mbox_handler_nix_txsch_alloc(struct rvu *rvu,
if (!nix_hw)
return NIX_AF_ERR_INVALID_NIXBLK;
+ parent_pf = &rvu->pf[rvu_get_pf(pcifunc)];
+
mutex_lock(&rvu->rsrc_lock);
/* Check if request is valid as per HW capabilities
@@ -2076,7 +2079,7 @@ int rvu_mbox_handler_nix_txsch_alloc(struct rvu *rvu,
}
rsp->aggr_level = hw->cap.nix_tx_aggr_lvl;
- rsp->aggr_lvl_rr_prio = TXSCH_TL1_DFLT_RR_PRIO;
+ rsp->aggr_lvl_rr_prio = parent_pf->tl1_rr_prio;
rsp->link_cfg_lvl = rvu_read64(rvu, blkaddr,
NIX_AF_PSE_CHANNEL_LEVEL) & 0x01 ?
NIX_TXSCH_LVL_TL3 : NIX_TXSCH_LVL_TL2;
@@ -2375,7 +2378,9 @@ static bool is_txschq_shaping_valid(struct rvu_hwinfo *hw, int lvl, u64 reg)
static void nix_tl1_default_cfg(struct rvu *rvu, struct nix_hw *nix_hw,
u16 pcifunc, int blkaddr)
{
+ struct rvu_pfvf *parent_pf = &rvu->pf[rvu_get_pf(pcifunc)];
u32 *pfvf_map;
+
int schq;
schq = nix_get_tx_link(rvu, pcifunc);
@@ -2384,7 +2389,7 @@ static void nix_tl1_default_cfg(struct rvu *rvu, struct nix_hw *nix_hw,
if (TXSCH_MAP_FLAGS(pfvf_map[schq]) & NIX_TXSCHQ_CFG_DONE)
return;
rvu_write64(rvu, blkaddr, NIX_AF_TL1X_TOPOLOGY(schq),
- (TXSCH_TL1_DFLT_RR_PRIO << 1));
+ (parent_pf->tl1_rr_prio << 1));
/* On OcteonTx2 the config was in bytes and newer silcons
* it's changed to weight.
@@ -5548,3 +5553,33 @@ int rvu_mbox_handler_nix_bandprof_get_hwinfo(struct rvu *rvu, struct msg_req *re
return 0;
}
+
+int rvu_mbox_handler_nix_tl1_rr_prio(struct rvu *rvu,
+ struct nix_tl1_rr_prio_req *req,
+ struct msg_rsp *rsp)
+{
+ u16 pcifunc = req->hdr.pcifunc;
+ int blkaddr, nixlf, schq, err;
+ struct rvu_pfvf *pfvf;
+ u16 regval;
+
+ err = nix_get_nixlf(rvu, pcifunc, &nixlf, &blkaddr);
+ if (err)
+ return err;
+
+ pfvf = rvu_get_pfvf(rvu, pcifunc);
+ /* Only PF is allowed */
+ if (is_vf(pcifunc))
+ return NIX_AF_ERR_TL1_RR_PRIO_PERM_DENIED;
+
+ pfvf->tl1_rr_prio = req->tl1_rr_prio;
+
+ /* update TL1 topology */
+ schq = nix_get_tx_link(rvu, pcifunc);
+ regval = rvu_read64(rvu, blkaddr, NIX_AF_TL1X_TOPOLOGY(schq));
+ regval &= ~GENMASK_ULL(4, 1);
+ regval |= pfvf->tl1_rr_prio << 1;
+ rvu_write64(rvu, blkaddr, NIX_AF_TL1X_TOPOLOGY(schq), regval);
+
+ return 0;
+}
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
index a4c18565f9f4..96132cfe2141 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
@@ -591,7 +591,7 @@ int otx2_txschq_config(struct otx2_nic *pfvf, int lvl, int prio, bool txschq_for
u16 (*schq_list)[MAX_TXSCHQ_PER_FUNC];
struct otx2_hw *hw = &pfvf->hw;
struct nix_txschq_config *req;
- u64 schq, parent;
+ u16 schq, parent;
u64 dwrr_val;
dwrr_val = mtu_to_dwrr_weight(pfvf, pfvf->tx_max_pktlen);
@@ -654,7 +654,7 @@ int otx2_txschq_config(struct otx2_nic *pfvf, int lvl, int prio, bool txschq_for
req->num_regs++;
req->reg[1] = NIX_AF_TL2X_SCHEDULE(schq);
- req->regval[1] = TXSCH_TL1_DFLT_RR_PRIO << 24 | dwrr_val;
+ req->regval[1] = hw->txschq_aggr_lvl_rr_prio << 24 | dwrr_val;
if (lvl == hw->txschq_link_cfg_lvl) {
req->num_regs++;
@@ -678,7 +678,7 @@ int otx2_txschq_config(struct otx2_nic *pfvf, int lvl, int prio, bool txschq_for
req->num_regs++;
req->reg[1] = NIX_AF_TL1X_TOPOLOGY(schq);
- req->regval[1] = (TXSCH_TL1_DFLT_RR_PRIO << 1);
+ req->regval[1] = hw->txschq_aggr_lvl_rr_prio << 1;
req->num_regs++;
req->reg[2] = NIX_AF_TL1X_CIR(schq);
@@ -742,6 +742,9 @@ int otx2_txsch_alloc(struct otx2_nic *pfvf)
pfvf->hw.txschq_list[lvl][schq] =
rsp->schq_list[lvl][schq];
+ pfvf->hw.txschq_link_cfg_lvl = rsp->link_cfg_lvl;
+ pfvf->hw.txschq_aggr_lvl_rr_prio = rsp->aggr_lvl_rr_prio;
+
return 0;
}
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index b142cc685a28..3e09f52f2dc6 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -208,6 +208,7 @@ struct otx2_hw {
/* NIX */
u8 txschq_link_cfg_lvl;
+ u8 txschq_aggr_lvl_rr_prio;
u16 txschq_list[NIX_TXSCH_LVL_CNT][MAX_TXSCHQ_PER_FUNC];
u16 matchall_ipolicer;
u32 dwrr_mtu;
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.c
index 63ef7c41d18d..b6bb6945f08a 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.c
@@ -64,9 +64,82 @@ static int otx2_dl_mcam_count_get(struct devlink *devlink, u32 id,
return 0;
}
+static int otx2_dl_tl1_rr_prio_validate(struct devlink *devlink, u32 id,
+ union devlink_param_value val,
+ struct netlink_ext_ack *extack)
+{
+ struct otx2_devlink *otx2_dl = devlink_priv(devlink);
+ struct otx2_nic *pf = otx2_dl->pfvf;
+
+ if (is_otx2_vf(pf->pcifunc)) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "TL1RR PRIORITY setting not allowed on VFs");
+ return -EOPNOTSUPP;
+ }
+
+ if (pci_num_vf(pf->pdev)) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "TL1RR PRIORITY setting not allowed as VFs are already attached");
+ return -EOPNOTSUPP;
+ }
+
+ if (val.vu8 > 7) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Valid priority range 0 - 7");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int otx2_dl_tl1_rr_prio_get(struct devlink *devlink, u32 id,
+ struct devlink_param_gset_ctx *ctx)
+{
+ struct otx2_devlink *otx2_dl = devlink_priv(devlink);
+ struct otx2_nic *pfvf = otx2_dl->pfvf;
+
+ ctx->val.vu8 = pfvf->hw.txschq_aggr_lvl_rr_prio;
+
+ return 0;
+}
+
+static int otx2_dl_tl1_rr_prio_set(struct devlink *devlink, u32 id,
+ struct devlink_param_gset_ctx *ctx)
+{
+ struct otx2_devlink *otx2_dl = devlink_priv(devlink);
+ struct otx2_nic *pfvf = otx2_dl->pfvf;
+ struct nix_tl1_rr_prio_req *req;
+ bool if_up;
+ int err;
+
+ if_up = netif_running(pfvf->netdev);
+
+ /* send mailbox to AF */
+ mutex_lock(&pfvf->mbox.lock);
+
+ req = otx2_mbox_alloc_msg_nix_tl1_rr_prio(&pfvf->mbox);
+ if (!req) {
+ mutex_unlock(&pfvf->mbox.lock);
+ return -ENOMEM;
+ }
+
+ req->tl1_rr_prio = ctx->val.vu8;
+ err = otx2_sync_mbox_msg(&pfvf->mbox);
+ mutex_unlock(&pfvf->mbox.lock);
+
+ /* Reconfigure TL1/TL2 DWRR PRIORITY */
+ if (!err && if_up) {
+ otx2_stop(pfvf->netdev);
+ otx2_open(pfvf->netdev);
+ }
+
+ return err;
+}
+
enum otx2_dl_param_id {
OTX2_DEVLINK_PARAM_ID_BASE = DEVLINK_PARAM_GENERIC_ID_MAX,
OTX2_DEVLINK_PARAM_ID_MCAM_COUNT,
+ OTX2_DEVLINK_PARAM_ID_TL1_RR_PRIO,
};
static const struct devlink_param otx2_dl_params[] = {
@@ -75,6 +148,11 @@ static const struct devlink_param otx2_dl_params[] = {
BIT(DEVLINK_PARAM_CMODE_RUNTIME),
otx2_dl_mcam_count_get, otx2_dl_mcam_count_set,
otx2_dl_mcam_count_validate),
+ DEVLINK_PARAM_DRIVER(OTX2_DEVLINK_PARAM_ID_TL1_RR_PRIO,
+ "tl1_rr_prio", DEVLINK_PARAM_TYPE_U8,
+ BIT(DEVLINK_PARAM_CMODE_RUNTIME),
+ otx2_dl_tl1_rr_prio_get, otx2_dl_tl1_rr_prio_set,
+ otx2_dl_tl1_rr_prio_validate),
};
static const struct devlink_ops otx2_devlink_ops = {
--
2.17.1
Powered by blists - more mailing lists