linux-kernel - [PATCH v8 03/17] firmware: arm_scmi: Refactor scmi_wait_for_message

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230118121426.492864-4-cristian.marussi@arm.com>
Date:   Wed, 18 Jan 2023 12:14:12 +0000
From:   Cristian Marussi <cristian.marussi@....com>
To:     linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc:     sudeep.holla@....com, james.quinlan@...adcom.com,
        Jonathan.Cameron@...wei.com, f.fainelli@...il.com,
        etienne.carriere@...aro.org, vincent.guittot@...aro.org,
        souvik.chakravarty@....com, wleavitt@...vell.com,
        peter.hilber@...nsynergy.com, nicola.mazzucato@....com,
        tarek.el-sherbiny@....com, quic_kshivnan@...cinc.com,
        cristian.marussi@....com
Subject: [PATCH v8 03/17] firmware: arm_scmi: Refactor scmi_wait_for_message_response

Refactor scmi_wait_for_message_response() to use a internal helper to
carry out its main duties; while doing that  make it accept directly an
scmi_desc parameter to interact with the configured transport.

No functional change.

Signed-off-by: Cristian Marussi <cristian.marussi@....com>
---
 drivers/firmware/arm_scmi/driver.c | 57 +++++++++++++++++-------------
 1 file changed, 33 insertions(+), 24 deletions(-)

diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index d7f21e81bd11..ce204a77c7f3 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -891,36 +891,18 @@ static bool scmi_xfer_done_no_timeout(struct scmi_chan_info *cinfo,
 	       ktime_after(ktime_get(), stop);
 }
 
-/**
- * scmi_wait_for_message_response  - An helper to group all the possible ways of
- * waiting for a synchronous message response.
- *
- * @cinfo: SCMI channel info
- * @xfer: Reference to the transfer being waited for.
- *
- * Chooses waiting strategy (sleep-waiting vs busy-waiting) depending on
- * configuration flags like xfer->hdr.poll_completion.
- *
- * Return: 0 on Success, error otherwise.
- */
-static int scmi_wait_for_message_response(struct scmi_chan_info *cinfo,
-					  struct scmi_xfer *xfer)
+static int scmi_wait_for_reply(struct device *dev, const struct scmi_desc *desc,
+			       struct scmi_chan_info *cinfo,
+			       struct scmi_xfer *xfer, unsigned int timeout_ms)
 {
-	struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
-	struct device *dev = info->dev;
-	int ret = 0, timeout_ms = info->desc->max_rx_timeout_ms;
-
-	trace_scmi_xfer_response_wait(xfer->transfer_id, xfer->hdr.id,
-				      xfer->hdr.protocol_id, xfer->hdr.seq,
-				      timeout_ms,
-				      xfer->hdr.poll_completion);
+	int ret = 0;
 
 	if (xfer->hdr.poll_completion) {
 		/*
 		 * Real polling is needed only if transport has NOT declared
 		 * itself to support synchronous commands replies.
 		 */
-		if (!info->desc->sync_cmds_completed_on_ret) {
+		if (!desc->sync_cmds_completed_on_ret) {
 			/*
 			 * Poll on xfer using transport provided .poll_done();
 			 * assumes no completion interrupt was available.
@@ -946,7 +928,7 @@ static int scmi_wait_for_message_response(struct scmi_chan_info *cinfo,
 			 */
 			spin_lock_irqsave(&xfer->lock, flags);
 			if (xfer->state == SCMI_XFER_SENT_OK) {
-				info->desc->ops->fetch_response(cinfo, xfer);
+				desc->ops->fetch_response(cinfo, xfer);
 				xfer->state = SCMI_XFER_RESP_OK;
 			}
 			spin_unlock_irqrestore(&xfer->lock, flags);
@@ -970,6 +952,33 @@ static int scmi_wait_for_message_response(struct scmi_chan_info *cinfo,
 	return ret;
 }
 
+/**
+ * scmi_wait_for_message_response  - An helper to group all the possible ways of
+ * waiting for a synchronous message response.
+ *
+ * @cinfo: SCMI channel info
+ * @xfer: Reference to the transfer being waited for.
+ *
+ * Chooses waiting strategy (sleep-waiting vs busy-waiting) depending on
+ * configuration flags like xfer->hdr.poll_completion.
+ *
+ * Return: 0 on Success, error otherwise.
+ */
+static int scmi_wait_for_message_response(struct scmi_chan_info *cinfo,
+					  struct scmi_xfer *xfer)
+{
+	struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+	struct device *dev = info->dev;
+
+	trace_scmi_xfer_response_wait(xfer->transfer_id, xfer->hdr.id,
+				      xfer->hdr.protocol_id, xfer->hdr.seq,
+				      info->desc->max_rx_timeout_ms,
+				      xfer->hdr.poll_completion);
+
+	return scmi_wait_for_reply(dev, info->desc, cinfo, xfer,
+				   info->desc->max_rx_timeout_ms);
+}
+
 /**
  * do_xfer() - Do one transfer
  *
-- 
2.34.1