Message-Id: <20230119212317.8324-2-rick.p.edgecombe@intel.com>
Date:   Thu, 19 Jan 2023 13:22:39 -0800
From:   Rick Edgecombe <rick.p.edgecombe@...el.com>
To:     x86@...nel.org, "H . Peter Anvin" <hpa@...or.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Ingo Molnar <mingo@...hat.com>, linux-kernel@...r.kernel.org,
        linux-doc@...r.kernel.org, linux-mm@...ck.org,
        linux-arch@...r.kernel.org, linux-api@...r.kernel.org,
        Arnd Bergmann <arnd@...db.de>,
        Andy Lutomirski <luto@...nel.org>,
        Balbir Singh <bsingharora@...il.com>,
        Borislav Petkov <bp@...en8.de>,
        Cyrill Gorcunov <gorcunov@...il.com>,
        Dave Hansen <dave.hansen@...ux.intel.com>,
        Eugene Syromiatnikov <esyr@...hat.com>,
        Florian Weimer <fweimer@...hat.com>,
        "H . J . Lu" <hjl.tools@...il.com>, Jann Horn <jannh@...gle.com>,
        Jonathan Corbet <corbet@....net>,
        Kees Cook <keescook@...omium.org>,
        Mike Kravetz <mike.kravetz@...cle.com>,
        Nadav Amit <nadav.amit@...il.com>,
        Oleg Nesterov <oleg@...hat.com>, Pavel Machek <pavel@....cz>,
        Peter Zijlstra <peterz@...radead.org>,
        Randy Dunlap <rdunlap@...radead.org>,
        Weijiang Yang <weijiang.yang@...el.com>,
        "Kirill A . Shutemov" <kirill.shutemov@...ux.intel.com>,
        John Allen <john.allen@....com>, kcc@...gle.com,
        eranian@...gle.com, rppt@...nel.org, jamorris@...ux.microsoft.com,
        dethoma@...rosoft.com, akpm@...ux-foundation.org,
        Andrew.Cooper3@...rix.com, christina.schimpe@...el.com
Cc:     rick.p.edgecombe@...el.com, Yu-cheng Yu <yu-cheng.yu@...el.com>
Subject: [PATCH v5 01/39] Documentation/x86: Add CET shadow stack description

From: Yu-cheng Yu <yu-cheng.yu@...el.com>

Introduce a new document on Control-flow Enforcement Technology (CET).

Tested-by: Pengfei Xu <pengfei.xu@...el.com>
Tested-by: John Allen <john.allen@....com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@...el.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@...el.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@...el.com>
Cc: Kees Cook <keescook@...omium.org>
---

v5:
 - Literal format tweaks (Bagas Sanjaya)
 - Update EOPNOTSUPP text due to unification after comment from (Kees)
 - Update 32 bit signal support with new behavior
 - Remove capitalization on shadow stack (Boris)
 - Fix typo

v4:
 - Drop clearcpuid piece (Boris)
 - Add some info about 32 bit

v3:
 - Clarify kernel IBT is supported by the kernel. (Kees, Andrew Cooper)
 - Clarify which arch_prctl's can take multiple bits. (Kees)
 - Describe ASLR characteristics of thread shadow stacks. (Kees)
 - Add exec section. (Andrew Cooper)
 - Fix some capitalization (Bagas Sanjaya)
 - Update new location of enablement status proc.
 - Add info about new user_shstk software capability.
 - Add more info about what the kernel pushes to the shadow stack on
   signal.

v2:
 - Updated to new arch_prctl() API
 - Add bit about new proc status

 Documentation/x86/index.rst |   1 +
 Documentation/x86/shstk.rst | 166 ++++++++++++++++++++++++++++++++++++
 2 files changed, 167 insertions(+)
 create mode 100644 Documentation/x86/shstk.rst

diff --git a/Documentation/x86/index.rst b/Documentation/x86/index.rst
index c73d133fd37c..8ac64d7de4dc 100644
--- a/Documentation/x86/index.rst
+++ b/Documentation/x86/index.rst
@@ -22,6 +22,7 @@ x86-specific Documentation
    mtrr
    pat
    intel-hfi
+   shstk
    iommu
    intel_txt
    amd-memory-encryption
diff --git a/Documentation/x86/shstk.rst b/Documentation/x86/shstk.rst
new file mode 100644
index 000000000000..f2e6f323cf68
--- /dev/null
+++ b/Documentation/x86/shstk.rst
@@ -0,0 +1,166 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================================
+Control-flow Enforcement Technology (CET) Shadow Stack
+======================================================
+
+CET Background
+==============
+
+Control-flow Enforcement Technology (CET) is term referring to several
+related x86 processor features that provides protection against control
+flow hijacking attacks. The HW feature itself can be set up to protect
+both applications and the kernel.
+
+CET introduces shadow stack and indirect branch tracking (IBT). Shadow stack
+is a secondary stack allocated from memory and cannot be directly modified by
+applications. When executing a CALL instruction, the processor pushes the
+return address to both the normal stack and the shadow stack. Upon
+function return, the processor pops the shadow stack copy and compares it
+to the normal stack copy. If the two differ, the processor raises a
+control-protection fault. IBT verifies indirect CALL/JMP targets are intended
+as marked by the compiler with 'ENDBR' opcodes. Not all CPU's have both Shadow
+Stack and Indirect Branch Tracking. Today in the 64-bit kernel, only userspace
+shadow stack and kernel IBT are supported.
+
+Requirements to use Shadow Stack
+================================
+
+To use userspace shadow stack you need HW that supports it, a kernel
+configured with it and userspace libraries compiled with it.
+
+The kernel Kconfig option is X86_USER_SHADOW_STACK, and it can be disabled
+with the kernel parameter: nousershstk.
+
+To build a user shadow stack enabled kernel, Binutils v2.29 or LLVM v6 or later
+are required.
+
+At run time, /proc/cpuinfo shows CET features if the processor supports
+CET. "user_shstk" means that userspace shadow stack is supported on the current
+kernel and HW.
+
+Application Enabling
+====================
+
+An application's CET capability is marked in its ELF note and can be verified
+from readelf/llvm-readelf output::
+
+    readelf -n <application> | grep -a SHSTK
+        properties: x86 feature: SHSTK
+
+The kernel does not process these applications markers directly. Applications
+or loaders must enable CET features using the interface described in section 4.
+Typically this would be done in dynamic loader or static runtime objects, as is
+the case in GLIBC.
+
+Enabling arch_prctl()'s
+=======================
+
+Elf features should be enabled by the loader using the below arch_prctl's. They
+are only supported in 64 bit user applications.
+
+arch_prctl(ARCH_SHSTK_ENABLE, unsigned long feature)
+    Enable a single feature specified in 'feature'. Can only operate on
+    one feature at a time.
+
+arch_prctl(ARCH_SHSTK_DISABLE, unsigned long feature)
+    Disable a single feature specified in 'feature'. Can only operate on
+    one feature at a time.
+
+arch_prctl(ARCH_SHSTK_LOCK, unsigned long features)
+    Lock in features at their current enabled or disabled status. 'features'
+    is a mask of all features to lock. All bits set are processed, unset bits
+    are ignored. The mask is ORed with the existing value. So any feature bits
+    set here cannot be enabled or disabled afterwards.
+
+The return values are as follows. On success, return 0. On error, errno can
+be::
+
+        -EPERM if any of the passed feature are locked.
+        -ENOTSUPP if the feature is not supported by the hardware or
+         kernel.
+        -EINVAL arguments (non existing feature, etc)
+
+The feature's bits supported are::
+
+    ARCH_SHSTK_SHSTK - Shadow stack
+    ARCH_SHSTK_WRSS  - WRSS
+
+Currently shadow stack and WRSS are supported via this interface. WRSS
+can only be enabled with shadow stack, and is automatically disabled
+if shadow stack is disabled.
+
+Proc Status
+===========
+To check if an application is actually running with shadow stack, the
+user can read the /proc/$PID/status. It will report "wrss" or "shstk"
+depending on what is enabled. The lines look like this::
+
+    x86_Thread_features: shstk wrss
+    x86_Thread_features_locked: shstk wrss
+
+Implementation of the Shadow Stack
+==================================
+
+Shadow Stack Size
+-----------------
+
+A task's shadow stack is allocated from memory to a fixed size of
+MIN(RLIMIT_STACK, 4 GB). In other words, the shadow stack is allocated to
+the maximum size of the normal stack, but capped to 4 GB. However,
+a compat-mode application's address space is smaller, each of its thread's
+shadow stack size is MIN(1/4 RLIMIT_STACK, 4 GB).
+
+Signal
+------
+
+By default, the main program and its signal handlers use the same shadow
+stack. Because the shadow stack stores only return addresses, a large
+shadow stack covers the condition that both the program stack and the
+signal alternate stack run out.
+
+When a signal happens, the old pre-signal state is pushed on the stack. When
+shadow stack is enabled, the shadow stack specific state is pushed onto the
+shadow stack. Today this is only the old SSP (shadow stack pointer), pushed
+in a special format with bit 63 set. On sigreturn this old SSP token is
+verified and restored by the kernel. The kernel will also push the normal
+restorer address to the shadow stack to help userspace avoid a shadow stack
+violation on the sigreturn path that goes through the restorer.
+
+So the shadow stack signal frame format is as follows::
+
+    |1...old SSP| - Pointer to old pre-signal ssp in sigframe token format
+                    (bit 63 set to 1)
+    |        ...| - Other state may be added in the future
+
+
+32 bit ABI signals are not supported in shadow stack processes. Linux prevents
+32 bit execution while shadow stack is enabled by the allocating shadow stack's
+outside of the 32 bit address space. When execution enters 32 bit mode, either
+via far call or returning to userspace, a #GP is generated by the hardware
+which, will be delivered to the process as a segfault. When transitioning to
+userspace the register's state will be as if the userspace ip being returned to
+caused the segfault.
+
+Fork
+----
+
+The shadow stack's vma has VM_SHADOW_STACK flag set; its PTEs are required
+to be read-only and dirty. When a shadow stack PTE is not RO and dirty, a
+shadow access triggers a page fault with the shadow stack access bit set
+in the page fault error code.
+
+When a task forks a child, its shadow stack PTEs are copied and both the
+parent's and the child's shadow stack PTEs are cleared of the dirty bit.
+Upon the next shadow stack access, the resulting shadow stack page fault
+is handled by page copy/re-use.
+
+When a pthread child is created, the kernel allocates a new shadow stack
+for the new thread. New shadow stack's behave like mmap() with respect to
+ASLR behavior.
+
+Exec
+----
+
+On exec, shadow stack features are disabled by the kernel. At which point,
+userspace can choose to re-enable, or lock them.
-- 
2.17.1

Powered by blists - more mailing lists