[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230119035136.21603-15-blarson@amd.com>
Date: Wed, 18 Jan 2023 19:51:35 -0800
From: Brad Larson <blarson@....com>
To: <linux-arm-kernel@...ts.infradead.org>
CC: <linux-kernel@...r.kernel.org>, <linux-mmc@...r.kernel.org>,
<linux-spi@...r.kernel.org>, <adrian.hunter@...el.com>,
<alcooperx@...il.com>, <andy.shevchenko@...il.com>,
<arnd@...db.de>, <brad@...sando.io>, <blarson@....com>,
<brendan.higgins@...ux.dev>, <briannorris@...omium.org>,
<brijeshkumar.singh@....com>, <catalin.marinas@....com>,
<davidgow@...gle.com>, <gsomlo@...il.com>, <gerg@...ux-m68k.org>,
<krzk@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<lee@...nel.org>, <lee.jones@...aro.org>, <broonie@...nel.org>,
<yamada.masahiro@...ionext.com>, <p.zabel@...gutronix.de>,
<piotrs@...ence.com>, <p.yadav@...com>, <rdunlap@...radead.org>,
<robh+dt@...nel.org>, <samuel@...lland.org>,
<fancer.lancer@...il.com>, <skhan@...uxfoundation.org>,
<suravee.suthikulpanit@....com>, <thomas.lendacky@....com>,
<tonyhuang.sunplus@...il.com>, <ulf.hansson@...aro.org>,
<vaishnav.a@...com>, <will@...nel.org>,
<devicetree@...r.kernel.org>
Subject: [PATCH v9 14/15] mmc: sdhci-cadence: Support mmc hardware reset
Add support for mmc hardware reset using a reset-controller
that would need to be enabled in the device tree with
a supporting driver. The default is disabled for all
existing designs.
Signed-off-by: Brad Larson <blarson@....com>
---
Changes since v6:
- Previously patch 17/17
- Changed delay after reset_control_assert() from 9 to 3 usec
- Renamed sdhci_mmc_hw_reset() to sdhci_cdns_mmc_hw_reset()
---
drivers/mmc/host/sdhci-cadence.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/mmc/host/sdhci-cadence.c b/drivers/mmc/host/sdhci-cadence.c
index e92aa79a8be2..62321cef41db 100644
--- a/drivers/mmc/host/sdhci-cadence.c
+++ b/drivers/mmc/host/sdhci-cadence.c
@@ -12,6 +12,7 @@
#include <linux/mmc/mmc.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/reset.h>
#include "sdhci-pltfm.h"
@@ -70,6 +71,7 @@ struct sdhci_cdns_priv {
spinlock_t wrlock; /* write lock */
bool enhanced_strobe;
void (*priv_writel)(struct sdhci_cdns_priv *priv, u32 val, void __iomem *reg);
+ struct reset_control *rst_hw;
unsigned int nr_phy_params;
struct sdhci_cdns_phy_param phy_params[];
};
@@ -458,6 +460,24 @@ static void sdhci_cdns_hs400_enhanced_strobe(struct mmc_host *mmc,
SDHCI_CDNS_HRS06_MODE_MMC_HS400);
}
+extern unsigned int sdhci_timeout_val;
+
+static void sdhci_cdns_mmc_hw_reset(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct sdhci_cdns_priv *priv = sdhci_cdns_priv(host);
+
+ dev_dbg(mmc_dev(host->mmc), "emmc hardware reset\n");
+
+ reset_control_assert(priv->rst_hw);
+ /* For eMMC, minimum is 1us but give it 3us for good measure */
+ udelay(3);
+
+ reset_control_deassert(priv->rst_hw);
+ /* For eMMC, minimum is 200us but give it 300us for good measure */
+ usleep_range(300, 1000);
+}
+
static int sdhci_cdns_probe(struct platform_device *pdev)
{
struct sdhci_host *host;
@@ -521,6 +541,17 @@ static int sdhci_cdns_probe(struct platform_device *pdev)
if (ret)
goto free;
+ if (host->mmc->caps & MMC_CAP_HW_RESET) {
+ priv->rst_hw = devm_reset_control_get_optional_exclusive(dev, "hw");
+ if (IS_ERR(priv->rst_hw)) {
+ ret = PTR_ERR(priv->rst_hw);
+ if (ret == -ENOENT)
+ priv->rst_hw = NULL;
+ } else {
+ host->mmc_host_ops.card_hw_reset = sdhci_cdns_mmc_hw_reset;
+ }
+ }
+
ret = sdhci_add_host(host);
if (ret)
goto free;
--
2.17.1
Powered by blists - more mailing lists