lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230119033918.44117-15-blarson@amd.com>
Date:   Wed, 18 Jan 2023 19:39:17 -0800
From:   Brad Larson <brad@...sando.io>
To:     linux-arm-kernel@...ts.infradead.org
Cc:     linux-kernel@...r.kernel.org, linux-mmc@...r.kernel.org,
        linux-spi@...r.kernel.org, adrian.hunter@...el.com,
        alcooperx@...il.com, andy.shevchenko@...il.com, arnd@...db.de,
        brad@...sando.io, blarson@....com, brendan.higgins@...ux.dev,
        briannorris@...omium.org, brijeshkumar.singh@....com,
        catalin.marinas@....com, davidgow@...gle.com, gsomlo@...il.com,
        gerg@...ux-m68k.org, krzk@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, lee@...nel.org,
        lee.jones@...aro.org, broonie@...nel.org,
        yamada.masahiro@...ionext.com, p.zabel@...gutronix.de,
        piotrs@...ence.com, p.yadav@...com, rdunlap@...radead.org,
        robh+dt@...nel.org, samuel@...lland.org, fancer.lancer@...il.com,
        skhan@...uxfoundation.org, suravee.suthikulpanit@....com,
        thomas.lendacky@....com, tonyhuang.sunplus@...il.com,
        ulf.hansson@...aro.org, vaishnav.a@...com, will@...nel.org,
        devicetree@...r.kernel.org
Subject: [PATCH v9 14/15] mmc: sdhci-cadence: Support mmc hardware reset

Add support for mmc hardware reset using a reset-controller
that would need to be enabled in the device tree with
a supporting driver.  The default is disabled for all
existing designs.

Signed-off-by: Brad Larson <blarson@....com>
---

Changes since v6:
- Previously patch 17/17
- Changed delay after reset_control_assert() from 9 to 3 usec
- Renamed sdhci_mmc_hw_reset() to sdhci_cdns_mmc_hw_reset()

---
 drivers/mmc/host/sdhci-cadence.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/mmc/host/sdhci-cadence.c b/drivers/mmc/host/sdhci-cadence.c
index e92aa79a8be2..62321cef41db 100644
--- a/drivers/mmc/host/sdhci-cadence.c
+++ b/drivers/mmc/host/sdhci-cadence.c
@@ -12,6 +12,7 @@
 #include <linux/mmc/mmc.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/reset.h>
 
 #include "sdhci-pltfm.h"
 
@@ -70,6 +71,7 @@ struct sdhci_cdns_priv {
 	spinlock_t wrlock;	/* write lock */
 	bool enhanced_strobe;
 	void (*priv_writel)(struct sdhci_cdns_priv *priv, u32 val, void __iomem *reg);
+	struct reset_control *rst_hw;
 	unsigned int nr_phy_params;
 	struct sdhci_cdns_phy_param phy_params[];
 };
@@ -458,6 +460,24 @@ static void sdhci_cdns_hs400_enhanced_strobe(struct mmc_host *mmc,
 					 SDHCI_CDNS_HRS06_MODE_MMC_HS400);
 }
 
+extern unsigned int sdhci_timeout_val;
+
+static void sdhci_cdns_mmc_hw_reset(struct mmc_host *mmc)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_cdns_priv *priv = sdhci_cdns_priv(host);
+
+	dev_dbg(mmc_dev(host->mmc), "emmc hardware reset\n");
+
+	reset_control_assert(priv->rst_hw);
+	/* For eMMC, minimum is 1us but give it 3us for good measure */
+	udelay(3);
+
+	reset_control_deassert(priv->rst_hw);
+	/* For eMMC, minimum is 200us but give it 300us for good measure */
+	usleep_range(300, 1000);
+}
+
 static int sdhci_cdns_probe(struct platform_device *pdev)
 {
 	struct sdhci_host *host;
@@ -521,6 +541,17 @@ static int sdhci_cdns_probe(struct platform_device *pdev)
 	if (ret)
 		goto free;
 
+	if (host->mmc->caps & MMC_CAP_HW_RESET) {
+		priv->rst_hw = devm_reset_control_get_optional_exclusive(dev, "hw");
+		if (IS_ERR(priv->rst_hw)) {
+			ret = PTR_ERR(priv->rst_hw);
+			if (ret == -ENOENT)
+				priv->rst_hw = NULL;
+		} else {
+			host->mmc_host_ops.card_hw_reset = sdhci_cdns_mmc_hw_reset;
+		}
+	}
+
 	ret = sdhci_add_host(host);
 	if (ret)
 		goto free;
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ