Message-ID: <Y8jHtWEz/9MaJwAD@debian>
Date:   Thu, 19 Jan 2023 12:31:49 +0800
From:   Gao Xiang <xiang@...nel.org>
To:     Sandeep Dhavale <dhavale@...gle.com>
Cc:     Nathan Huckleberry <nhuck@...gle.com>,
        Daeho Jeong <daehojeong@...gle.com>,
        Jonathan Corbet <corbet@....net>, linux-doc@...r.kernel.org,
        Lai Jiangshan <jiangshanlai@...il.com>,
        linux-kernel@...r.kernel.org,
        Sami Tolvanen <samitolvanen@...gle.com>,
        Tejun Heo <tj@...nel.org>,
        Gao Xiang <hsiangkao@...ux.alibaba.com>,
        linux-erofs@...ts.ozlabs.org
Subject: Re: [PATCH] workqueue: Add WQ_SCHED_FIFO

On Wed, Jan 18, 2023 at 06:41:26PM -0800, Sandeep Dhavale via Linux-erofs wrote:
> On Sat, Jan 14, 2023 at 1:01 PM Nathan Huckleberry <nhuck@...gle.com> wrote:
> >
> > On Fri, Jan 13, 2023 at 6:20 PM Gao Xiang <hsiangkao@...ux.alibaba.com> wrote:
> > >
> > > Hi Nathan!
> > >
> > > On 2023/1/14 05:07, Nathan Huckleberry wrote:
> > > > Add a WQ flag that allows workqueues to use SCHED_FIFO with the least
> > > > imporant RT priority.  This can reduce scheduler latency for IO
> > > > post-processing when the CPU is under load without impacting other RT
> > > > workloads.  This has been shown to improve app startup time on Android
> > > > [1].
> > >
> > > Thank you all for your effort on this.  Unfortunately I have no time to
> > > setup the test [1] until now.  If it can be addressed as a new workqueue
> > > feature, that would be much helpful to me.  Otherwise, I still need to
> > > find a way to resolve the latest Android + EROFS latency problem.
> > >
> >
> > The above patch and following diff should have equivalent performance
> > to [1], but I have not tested it.
> >
> > diff --git a/fs/erofs/zdata.c b/fs/erofs/zdata.c
> > index ccf7c55d477f..a9c3893ad1d4 100644
> > --- a/fs/erofs/zdata.c
> > +++ b/fs/erofs/zdata.c
> > @@ -201,7 +201,7 @@ static inline int z_erofs_init_workqueue(void)
> >          * scheduling overhead, perhaps per-CPU threads should be better?
> >          */
> >         z_erofs_workqueue = alloc_workqueue("erofs_unzipd",
> > -                                           WQ_UNBOUND | WQ_HIGHPRI,
> > +                                           WQ_SCHED_FIFO,
> >                                             onlinecpus + onlinecpus / 4);
> >         return z_erofs_workqueue ? 0 : -ENOMEM;
> >
> > Thanks,
> > Huck
> >
> >  }
> >
> Hello All,
> With WQ_SCHED_FIFO and erofs patch mentioned above, I see that average
> sched latency improves in the same ballpark as my previous
> work proposed in [1] doing the same experiment (app launch tests) and
> variation is reduced significantly.
> 
> Here is the table
> |--------------+-----------+---------------+---------|
> |              | Workqueue | WQ_SCHED_FIFO | Delta   |
> |--------------+-----------+---------------+---------|
> | Average (us) | 15253     | 3514          | -76.96% |
> |--------------+-----------+---------------+---------|
> | Median (us)  | 14001     | 3450          | -75.36% |
> |--------------+-----------+---------------+---------|
> | Minimum (us) | 3117      | 3097          | -0.64%  |
> |--------------+-----------+---------------+---------|
> | Maximum (us) | 30170     | 4896          | -83.77% |
> |--------------+-----------+---------------+---------|
> | Stdev        | 7166      | 319           |         |
> |--------------+-----------+---------------+---------|

Thanks, Sandeep.  If so, there could be a way forward in
this WQ_SCHED_FIFO way as well?

Anyway, I will seek time working on kthread_worker
alternatively in my Lunar New year vacations since I'd
like to resolve it in some way anyway.

Thanks,
Gao Xiang

> 
> Thanks,
> Sandeep.
> 
> [1] https://lore.kernel.org/linux-erofs/20230106073502.4017276-1-dhavale@google.com/
> 
> >
> > > >
> > > > Scheduler latency affects several drivers as evidenced by [1], [2], [3],
> > > > [4].  Some of these drivers have moved post-processing into IRQ context.
> > > > However, this can cause latency spikes for real-time threads and jitter
> > > > related jank on Android.  Using a workqueue with SCHED_FIFO improves
> > > > scheduler latency without causing latency problems for RT threads.
> > >
> > > softirq context is actually mainly for post-interrupt handling I think.
> > > but considering decompression/verification/decryption all workload are much
> > > complex than that and less important than real post-interrupt handling.
> > > I don't think softirq context is the best place to handle these
> > > CPU-intensive jobs.  Beside, it could cause some important work moving to
> > > softirqd unexpectedly in the extreme cases.  Also such many post-processing
> > > jobs are as complex as they could sleep so that softirq context is
> > > unsuitable as well.
> > >
> > > Anyway, I second this proposal if possible:
> > >
> > > Acked-by: Gao Xiang <hsiangkao@...ux.alibaba.com>
> > >
> > > Thanks,
> > > Gao Xiang
> > >
> > > >
> > > > [1]:
> > > > https://lore.kernel.org/linux-erofs/20230106073502.4017276-1-dhavale@google.com/
> > > > [2]:
> > > > https://lore.kernel.org/linux-f2fs-devel/20220802192437.1895492-1-daeho43@gmail.com/
> > > > [3]:
> > > > https://lore.kernel.org/dm-devel/20220722093823.4158756-4-nhuck@google.com/
> > > > [4]:
> > > > https://lore.kernel.org/dm-crypt/20200706173731.3734-1-ignat@cloudflare.com/
> > > >
> > > > This change has been tested on dm-verity with the following fio config:
> > > >
> > > > [global]
> > > > time_based
> > > > runtime=120
> > > >
> > > > [do-verify]
> > > > ioengine=sync
> > > > filename=/dev/testing
> > > > rw=randread
> > > > direct=1
> > > >
> > > > [burn_8x90%_qsort]
> > > > ioengine=cpuio
> > > > cpuload=90
> > > > numjobs=8
> > > > cpumode=qsort
> > > >
> > > > Before:
> > > > clat (usec): min=13, max=23882, avg=29.56, stdev=113.29 READ:
> > > > bw=122MiB/s (128MB/s), 122MiB/s-122MiB/s (128MB/s-128MB/s), io=14.3GiB
> > > > (15.3GB), run=120001-120001msec
> > > >
> > > > After:
> > > > clat (usec): min=13, max=23137, avg=19.96, stdev=105.71 READ:
> > > > bw=180MiB/s (189MB/s), 180MiB/s-180MiB/s (189MB/s-189MB/s), io=21.1GiB
> > > > (22.7GB), run=120012-120012msec
> > > >
> > > > Cc: Sandeep Dhavale <dhavale@...gle.com>
> > > > Cc: Daeho Jeong <daehojeong@...gle.com>
> > > > Cc: Eric Biggers <ebiggers@...nel.org>
> > > > Cc: Sami Tolvanen <samitolvanen@...gle.com>
> > > > Signed-off-by: Nathan Huckleberry <nhuck@...gle.com>
> > > > ---
> > > >   Documentation/core-api/workqueue.rst | 12 ++++++++++
> > > >   include/linux/workqueue.h            |  9 +++++++
> > > >   kernel/workqueue.c                   | 36 +++++++++++++++++++++-------
> > > >   3 files changed, 48 insertions(+), 9 deletions(-)
> > > >
> > > > diff --git a/Documentation/core-api/workqueue.rst b/Documentation/core-api/workqueue.rst
> > > > index 3b22ed137662..26faf2806c66 100644
> > > > --- a/Documentation/core-api/workqueue.rst
> > > > +++ b/Documentation/core-api/workqueue.rst
> > > > @@ -216,6 +216,18 @@ resources, scheduled and executed.
> > > >
> > > >     This flag is meaningless for unbound wq.
> > > >
> > > > +``WQ_SCHED_FIFO``
> > > > +  Work items of a fifo wq are queued to the fifo
> > > > +  worker-pool of the target cpu.  Fifo worker-pools are
> > > > +  served by worker threads with scheduler policy SCHED_FIFO and
> > > > +  the least important real-time priority.  This can be useful
> > > > +  for workloads where low latency is imporant.
> > > > +
> > > > +  A workqueue cannot be both high-priority and fifo.
> > > > +
> > > > +  Note that normal and fifo worker-pools don't interact with
> > > > +  each other.  Each maintains its separate pool of workers and
> > > > +  implements concurrency management among its workers.
> > > >
> > > >   ``max_active``
> > > >   --------------
> > > > diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
> > > > index ac551b8ee7d9..43a4eeaf8ff4 100644
> > > > --- a/include/linux/workqueue.h
> > > > +++ b/include/linux/workqueue.h
> > > > @@ -134,6 +134,10 @@ struct workqueue_attrs {
> > > >        * @nice: nice level
> > > >        */
> > > >       int nice;
> > > > +     /**
> > > > +      * @sched_fifo: is using SCHED_FIFO
> > > > +      */
> > > > +     bool sched_fifo;
> > > >
> > > >       /**
> > > >        * @cpumask: allowed CPUs
> > > > @@ -334,6 +338,11 @@ enum {
> > > >        * http://thread.gmane.org/gmane.linux.kernel/1480396
> > > >        */
> > > >       WQ_POWER_EFFICIENT      = 1 << 7,
> > > > +     /*
> > > > +      * Low real-time priority workqueues can reduce scheduler latency
> > > > +      * for latency sensitive workloads like IO post-processing.
> > > > +      */
> > > > +     WQ_SCHED_FIFO           = 1 << 8,
> > > >
> > > >       __WQ_DESTROYING         = 1 << 15, /* internal: workqueue is destroying */
> > > >       __WQ_DRAINING           = 1 << 16, /* internal: workqueue is draining */
> > > > diff --git a/kernel/workqueue.c b/kernel/workqueue.c
> > > > index 5dc67aa9d696..99c5e0a3dc28 100644
> > > > --- a/kernel/workqueue.c
> > > > +++ b/kernel/workqueue.c
> > > > @@ -85,7 +85,7 @@ enum {
> > > >       WORKER_NOT_RUNNING      = WORKER_PREP | WORKER_CPU_INTENSIVE |
> > > >                                 WORKER_UNBOUND | WORKER_REBOUND,
> > > >
> > > > -     NR_STD_WORKER_POOLS     = 2,            /* # standard pools per cpu */
> > > > +     NR_STD_WORKER_POOLS     = 3,            /* # standard pools per cpu */
> > > >
> > > >       UNBOUND_POOL_HASH_ORDER = 6,            /* hashed by pool->attrs */
> > > >       BUSY_WORKER_HASH_ORDER  = 6,            /* 64 pointers */
> > > > @@ -1949,7 +1949,8 @@ static struct worker *create_worker(struct worker_pool *pool)
> > > >
> > > >       if (pool->cpu >= 0)
> > > >               snprintf(id_buf, sizeof(id_buf), "%d:%d%s", pool->cpu, id,
> > > > -                      pool->attrs->nice < 0  ? "H" : "");
> > > > +                      pool->attrs->sched_fifo ? "F" :
> > > > +                      (pool->attrs->nice < 0  ? "H" : ""));
> > > >       else
> > > >               snprintf(id_buf, sizeof(id_buf), "u%d:%d", pool->id, id);
> > > >
> > > > @@ -1958,7 +1959,11 @@ static struct worker *create_worker(struct worker_pool *pool)
> > > >       if (IS_ERR(worker->task))
> > > >               goto fail;
> > > >
> > > > -     set_user_nice(worker->task, pool->attrs->nice);
> > > > +     if (pool->attrs->sched_fifo)
> > > > +             sched_set_fifo_low(worker->task);
> > > > +     else
> > > > +             set_user_nice(worker->task, pool->attrs->nice);
> > > > +
> > > >       kthread_bind_mask(worker->task, pool->attrs->cpumask);
> > > >
> > > >       /* successful, attach the worker to the pool */
> > > > @@ -4323,9 +4328,17 @@ static void wq_update_unbound_numa(struct workqueue_struct *wq, int cpu,
> > > >
> > > >   static int alloc_and_link_pwqs(struct workqueue_struct *wq)
> > > >   {
> > > > -     bool highpri = wq->flags & WQ_HIGHPRI;
> > > > +     int pool_index = 0;
> > > >       int cpu, ret;
> > > >
> > > > +     if (wq->flags & WQ_HIGHPRI && wq->flags & WQ_SCHED_FIFO)
> > > > +             return -EINVAL;
> > > > +
> > > > +     if (wq->flags & WQ_HIGHPRI)
> > > > +             pool_index = 1;
> > > > +     if (wq->flags & WQ_SCHED_FIFO)
> > > > +             pool_index = 2;
> > > > +
> > > >       if (!(wq->flags & WQ_UNBOUND)) {
> > > >               wq->cpu_pwqs = alloc_percpu(struct pool_workqueue);
> > > >               if (!wq->cpu_pwqs)
> > > > @@ -4337,7 +4350,7 @@ static int alloc_and_link_pwqs(struct workqueue_struct *wq)
> > > >                       struct worker_pool *cpu_pools =
> > > >                               per_cpu(cpu_worker_pools, cpu);
> > > >
> > > > -                     init_pwq(pwq, wq, &cpu_pools[highpri]);
> > > > +                     init_pwq(pwq, wq, &cpu_pools[pool_index]);
> > > >
> > > >                       mutex_lock(&wq->mutex);
> > > >                       link_pwq(pwq);
> > > > @@ -4348,13 +4361,13 @@ static int alloc_and_link_pwqs(struct workqueue_struct *wq)
> > > >
> > > >       cpus_read_lock();
> > > >       if (wq->flags & __WQ_ORDERED) {
> > > > -             ret = apply_workqueue_attrs(wq, ordered_wq_attrs[highpri]);
> > > > +             ret = apply_workqueue_attrs(wq, ordered_wq_attrs[pool_index]);
> > > >               /* there should only be single pwq for ordering guarantee */
> > > >               WARN(!ret && (wq->pwqs.next != &wq->dfl_pwq->pwqs_node ||
> > > >                             wq->pwqs.prev != &wq->dfl_pwq->pwqs_node),
> > > >                    "ordering guarantee broken for workqueue %s\n", wq->name);
> > > >       } else {
> > > > -             ret = apply_workqueue_attrs(wq, unbound_std_wq_attrs[highpri]);
> > > > +             ret = apply_workqueue_attrs(wq, unbound_std_wq_attrs[pool_index]);
> > > >       }
> > > >       cpus_read_unlock();
> > > >
> > > > @@ -6138,7 +6151,8 @@ static void __init wq_numa_init(void)
> > > >    */
> > > >   void __init workqueue_init_early(void)
> > > >   {
> > > > -     int std_nice[NR_STD_WORKER_POOLS] = { 0, HIGHPRI_NICE_LEVEL };
> > > > +     int std_nice[NR_STD_WORKER_POOLS] = { 0, HIGHPRI_NICE_LEVEL, 0 };
> > > > +     bool std_sched_fifo[NR_STD_WORKER_POOLS] = { false, false, true };
> > > >       int i, cpu;
> > > >
> > > >       BUILD_BUG_ON(__alignof__(struct pool_workqueue) < __alignof__(long long));
> > > > @@ -6158,8 +6172,10 @@ void __init workqueue_init_early(void)
> > > >                       BUG_ON(init_worker_pool(pool));
> > > >                       pool->cpu = cpu;
> > > >                       cpumask_copy(pool->attrs->cpumask, cpumask_of(cpu));
> > > > -                     pool->attrs->nice = std_nice[i++];
> > > > +                     pool->attrs->nice = std_nice[i];
> > > > +                     pool->attrs->sched_fifo = std_sched_fifo[i];
> > > >                       pool->node = cpu_to_node(cpu);
> > > > +                     i++;
> > > >
> > > >                       /* alloc pool ID */
> > > >                       mutex_lock(&wq_pool_mutex);
> > > > @@ -6174,6 +6190,7 @@ void __init workqueue_init_early(void)
> > > >
> > > >               BUG_ON(!(attrs = alloc_workqueue_attrs()));
> > > >               attrs->nice = std_nice[i];
> > > > +             attrs->sched_fifo = std_sched_fifo[i];
> > > >               unbound_std_wq_attrs[i] = attrs;
> > > >
> > > >               /*
> > > > @@ -6183,6 +6200,7 @@ void __init workqueue_init_early(void)
> > > >                */
> > > >               BUG_ON(!(attrs = alloc_workqueue_attrs()));
> > > >               attrs->nice = std_nice[i];
> > > > +             attrs->sched_fifo = std_sched_fifo[i];
> > > >               attrs->no_numa = true;
> > > >               ordered_wq_attrs[i] = attrs;
> > > >       }

Powered by blists - more mailing lists