Message-ID: <20230119092115.02cbbab3@booty>
Date:   Thu, 19 Jan 2023 09:21:15 +0100
From:   Luca Ceresoli <luca.ceresoli@...tlin.com>
To:     Andy Shevchenko <andriy.shevchenko@...el.com>
Cc:     Tomi Valkeinen <tomi.valkeinen@...asonboard.com>,
        linux-media@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Wolfram Sang <wsa@...nel.org>,
        Matti Vaittinen <Matti.Vaittinen@...rohmeurope.com>,
        Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Peter Rosin <peda@...ntia.se>,
        Liam Girdwood <lgirdwood@...il.com>,
        Mark Brown <broonie@...nel.org>,
        Sakari Ailus <sakari.ailus@...ux.intel.com>,
        Michael Tretter <m.tretter@...gutronix.de>,
        Shawn Tu <shawnx.tu@...el.com>,
        Hans Verkuil <hverkuil@...all.nl>,
        Mike Pagano <mpagano@...too.org>,
        Krzysztof Hałasa <khalasa@...p.pl>,
        Marek Vasut <marex@...x.de>,
        Luca Ceresoli <luca@...aceresoli.net>
Subject: Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support

Hi Andy,

On Wed, 18 Jan 2023 19:39:46 +0200
Andy Shevchenko <andriy.shevchenko@...el.com> wrote:

> On Wed, Jan 18, 2023 at 06:17:53PM +0100, Luca Ceresoli wrote:
> > On Wed, 18 Jan 2023 16:23:53 +0200
> > Andy Shevchenko <andriy.shevchenko@...el.com> wrote:  
> 
> ...
> 
> > > > +A typical example follows.
> > > > +
> > > > +Topology::
> > > > +
> > > > +                      Slave X @ 0x10
> > > > +              .-----.   |
> > > > +  .-----.     |     |---+---- B
> > > > +  | CPU |--A--| ATR |
> > > > +  `-----'     |     |---+---- C
> > > > +              `-----'   |
> > > > +                      Slave Y @ 0x10
> > > > +
> > > > +Alias table:
> > > > +
> > > > +.. table::
> > > > +
> > > > +   ======   =====
> > > > +   Client   Alias
> > > > +   ======   =====
> > > > +   X        0x20
> > > > +   Y        0x30
> > > > +   ======   =====
> > > > +
> > > > +Transaction:
> > > > +
> > > > + - Slave X driver sends a transaction (on adapter B), slave address 0x10
> > > > + - ATR driver rewrites messages with address 0x20, forwards to adapter A
> > > > + - Physical I2C transaction on bus A, slave address 0x20
> > > > + - ATR chip propagates transaction on bus B with address translated to 0x10
> > > > + - Slave X chip replies on bus B
> > > > + - ATR chip forwards reply on bus A
> > > > + - ATR driver rewrites messages with address 0x10
> > > > + - Slave X driver gets back the msgs[], with reply and address 0x10    
> > > 
> > > I'm not sure I got the real / virtual status of the adapters. Are the B and C
> > > virtual ones, while A is the real?  
> > 
> > Let me reply, as I wrote these docs back at the times and thus I feel
> > guilty in case that's unclear. :)
> > 
> > I don't like the word "virtual" in this situation. A, B and C are all
> > physical busses, made of copper and run by electrons on PCBs. B and C
> > are the "remote" or "downstream" busses (w.r.t. the CPU), where the i2c
> > devices are and where transactions happen using the address that the
> > chip responds to. A is the "local" or "upstream" bus that is driven
> > directly by the CPU (*) and where address aliases are used. Using
> > aliases there is necessary because using address 0x10 would be
> > ambiguous as there are two 0x10 chips out there.
> > 
> > (*) There could be more layers of course, but still A is "closer to the
> > CPU than B and C", for the sake of completeness.  
> 
> Can the diagram and/or text be updated to elaborate this?

Let's see whether the text below is better. I haven't changed the
image, I don't think we can do much more in ASCII, but maybe we can
replace it with an SVG [0]?

[0]
https://github.com/lucaceresoli/docs/blob/master/video-serdes-linux/images/i2c-ti.svg

A typical example follows.

Topology::

                      Slave X @ 0x10
              .-----.   |
  .-----.     |     |---+---- B
  | CPU |--A--| ATR |
  `-----'     |     |---+---- C
              `-----'   |
                      Slave Y @ 0x10

Alias table:

A, B and C are three physical I2C busses, electrically independent from
each other. The ATR receives the transactions initiated on bus A and
propagates them on bus B or bus C or none depending on the device address
in the transaction and based on the alias table.

Alias table:

.. table::

   ===============   =====
   Client            Alias
   ===============   =====
   X (bus B, 0x10)   0x20
   Y (bus C, 0x10)   0x30
   ===============   =====

Transaction:

 - Slave X driver sends a transaction (on adapter B), slave address 0x10
 - ATR driver finds slave X is on bus B and has alias 0x20, rewrites
   messages with address 0x20, forwards to adapter A
 - Physical I2C transaction on bus A, slave address 0x20
 - ATR chip detects transaction on address 0x20, finds it in table,
   propagates transaction on bus B with address translated to 0x10,
   keeps clock streched on bus A waiting for reply
 - Slave X chip (on bus B) detects transaction at its own physical
   address 0x10 and replies normally
 - ATR chip stops clock stretching and forwards reply on bus A,
   with address translated back to 0x20
 - ATR driver receives the reply, rewrites messages with address 0x10
   as they were initially
 - Slave X driver gets back the msgs[], with reply and address 0x10

Let me know whether this sounds better. And perhaps Tomi can further
improve it.


> > > > +void i2c_atr_set_driver_data(struct i2c_atr *atr, void *data)
> > > > +{
> > > > +	atr->priv = data;
> > > > +}
> > > > +EXPORT_SYMBOL_NS_GPL(i2c_atr_set_driver_data, I2C_ATR);
> > > > +
> > > > +void *i2c_atr_get_driver_data(struct i2c_atr *atr)
> > > > +{
> > > > +	return atr->priv;
> > > > +}
> > > > +EXPORT_SYMBOL_NS_GPL(i2c_atr_get_driver_data, I2C_ATR);    
> > > 
> > > Just to be sure: Is it really _driver_ data and not _device instance_ data?  
> > 
> > It is device instance data indeed. I don't remember why this got
> > changed, but in v3 it was i2c_atr_set_clientdata().  
> 
> It's me who was and is against calling it clientdata due to possible
> confusion with i2c_set/get_clientdata() that is about *driver data*.
> I missed that time the fact that this is about device instance data.
> I dunno which name would be better in this case, i2c_atr_set/get_client_priv() ?

Not sure I'm following you here. The i2c_atr_set_clientdata() name was
given for similarity with i2c_set_clientdata(). The latter wraps 
dev_set_drvdata(), which sets `struct device`->driver_data. There is
one driver_data per each `struct device` instance, not per each driver.
The same goes for i2c_atr_set_driver_data(): there is one priv pointer
per each `struct i2c_atr` instance.

-- 
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Powered by blists - more mailing lists