| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <cc97b5eb-3171-6453-4838-75d77f6bc3f8@linaro.org>
Date: Thu, 19 Jan 2023 14:54:19 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Mark Yacoub <markyacoub@...omium.org>, quic_khsieh@...cinc.com,
linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, intel-gfx@...ts.freedesktop.org
Cc: robdclark@...il.com, quic_abhinavk@...cinc.com, sean@...rly.run,
airlied@...il.com, daniel@...ll.ch, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, agross@...nel.org,
andersson@...nel.org, konrad.dybcio@...ainline.org,
jani.nikula@...ux.intel.com, joonas.lahtinen@...ux.intel.com,
rodrigo.vivi@...el.com, tvrtko.ursulin@...ux.intel.com,
tzimmermann@...e.de, ville.syrjala@...ux.intel.com,
stanislav.lisovskiy@...el.com, matthew.d.roper@...el.com,
imre.deak@...el.com, lucas.demarchi@...el.com,
manasi.d.navare@...el.com, swati2.sharma@...el.com,
bhanuprakash.modem@...el.com, javierm@...hat.com,
jose.souza@...el.com, lyude@...hat.com, hbh25y@...il.com,
arun.r.murthy@...el.com, ashutosh.dixit@...el.com,
ankit.k.nautiyal@...el.com, maxime@...no.tech, swboyd@...omium.org,
christophe.jaillet@...adoo.fr, quic_sbillaka@...cinc.com,
johan+linaro@...nel.org, dianders@...omium.org, marex@...x.de,
quic_jesszhan@...cinc.com, bjorn.andersson@...aro.org,
abhinavk@...eaurora.org, seanpaul@...omium.org,
Jani Nikula <jani.nikula@...el.com>
Subject: Re: [PATCH v6 04/10] drm/hdcp: Expand HDCP helper library for
enable/disable/check
On 18/01/2023 21:30, Mark Yacoub wrote:
> From: Sean Paul <seanpaul@...omium.org>
>
> This patch expands upon the HDCP helper library to manage HDCP
> enable, disable, and check.
>
> Previous to this patch, the majority of the state management and sink
> interaction is tucked inside the Intel driver with the understanding
> that once a new platform supported HDCP we could make good decisions
> about what should be centralized. With the addition of HDCP support
> for Qualcomm, it's time to migrate the protocol-specific bits of HDCP
> authentication, key exchange, and link checks to the HDCP helper.
>
> In terms of functionality, this migration is 1:1 with the Intel driver,
> however things are laid out a bit differently than with intel_hdcp.c,
> which is why this is a separate patch from the i915 transition to the
> helper. On i915, the shim vtable is used to account for HDMI vs. DP
> vs. DP-MST differences whereas the helper library uses a LUT to
> account for the register offsets and a remote read function to route
> the messages. On i915, storing the sink information in the source is
> done inline whereas now we use the new drm_hdcp_helper_funcs vtable
> to store and fetch information to/from source hw. Finally, instead of
> calling enable/disable directly from the driver, we'll leave that
> decision to the helper and by calling drm_hdcp_helper_atomic_commit()
> from the driver. All told, this will centralize the protocol and state
> handling in the helper, ensuring we collect all of our bugs^Wlogic
> in one place.
>
> Cc: Abhinav Kumar <abhinavk@...eaurora.org>
> Acked-by: Jani Nikula <jani.nikula@...el.com>
> Reviewed-by: Abhinav Kumar <abhinavk@...eaurora.org>
> Signed-off-by: Sean Paul <seanpaul@...omium.org>
> Signed-off-by: Mark Yacoub <markyacoub@...omium.org>
> Link: https://patchwork.freedesktop.org/patch/msgid/20210913175747.47456-5-sean@poorly.run #v1
> Link: https://patchwork.freedesktop.org/patch/msgid/20210915203834.1439-5-sean@poorly.run #v2
> Link: https://patchwork.freedesktop.org/patch/msgid/20211001151145.55916-5-sean@poorly.run #v3
> Link: https://patchwork.freedesktop.org/patch/msgid/20211105030434.2828845-5-sean@poorly.run #v4
> Link: https://patchwork.freedesktop.org/patch/msgid/20220411204741.1074308-5-sean@poorly.run #v5
>
> Changes in v2:
> -Fixed set-but-unused variable identified by 0-day
> Changes in v3:
> -Fixed uninitialized variable warning identified by 0-day
> Changes in v4:
> -None
> Changes in v5:
> -None
> Changes in v6:
> -Fixed typo in function descriptions
> -Rebased: Moved the new code between drm_hdcp.h and drm_hdcp_helper.c/h
> -Add missing headers. Reported-by: kernel test robot <lkp@...el.com>
>
> ---
> drivers/gpu/drm/display/drm_hdcp_helper.c | 1109 +++++++++++++++++++++
> include/drm/display/drm_hdcp.h | 168 +++-
> include/drm/display/drm_hdcp_helper.h | 30 +-
> 3 files changed, 1305 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/display/drm_hdcp_helper.c b/drivers/gpu/drm/display/drm_hdcp_helper.c
> index ce92f1cac251..de8c006b9cda 100644
> --- a/drivers/gpu/drm/display/drm_hdcp_helper.c
> +++ b/drivers/gpu/drm/display/drm_hdcp_helper.c
> @@ -6,13 +6,18 @@
> * Ramalingam C <ramalingam.c@...el.com>
> */
>
> +#include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/err.h>
> #include <linux/gfp.h>
> +#include <linux/i2c.h>
> +#include <linux/iopoll.h>
> #include <linux/export.h>
> #include <linux/slab.h>
> #include <linux/firmware.h>
> +#include <linux/workqueue.h>
>
> +#include <drm/display/drm_dp_helper.h>
> #include <drm/display/drm_hdcp_helper.h>
> #include <drm/drm_sysfs.h>
> #include <drm/drm_print.h>
> @@ -512,3 +517,1107 @@ bool drm_hdcp_atomic_check(struct drm_connector *connector,
> return old_hdcp != new_hdcp;
> }
> EXPORT_SYMBOL(drm_hdcp_atomic_check);
> +
> +struct drm_hdcp_helper_data {
> + struct mutex mutex;
> + struct mutex *driver_mutex;
> +
> + struct drm_connector *connector;
> + const struct drm_hdcp_helper_funcs *funcs;
> +
> + u64 value;
> + unsigned int enabled_type;
> +
> + struct delayed_work check_work;
> + struct work_struct prop_work;
> +
> + struct drm_dp_aux *aux;
> + const struct drm_hdcp_hdcp1_receiver_reg_lut *hdcp1_lut;
> +};
> +
> +struct drm_hdcp_hdcp1_receiver_reg_lut {
> + unsigned int bksv;
> + unsigned int ri;
> + unsigned int aksv;
> + unsigned int an;
> + unsigned int ainfo;
> + unsigned int v[5];
> + unsigned int bcaps;
> + unsigned int bcaps_mask_repeater_present;
> + unsigned int bstatus;
> +};
> +
> +static const struct drm_hdcp_hdcp1_receiver_reg_lut drm_hdcp_hdcp1_ddc_lut = {
> + .bksv = DRM_HDCP_DDC_BKSV,
> + .ri = DRM_HDCP_DDC_RI_PRIME,
> + .aksv = DRM_HDCP_DDC_AKSV,
> + .an = DRM_HDCP_DDC_AN,
> + .ainfo = DRM_HDCP_DDC_AINFO,
> + .v = { DRM_HDCP_DDC_V_PRIME(0), DRM_HDCP_DDC_V_PRIME(1),
> + DRM_HDCP_DDC_V_PRIME(2), DRM_HDCP_DDC_V_PRIME(3),
> + DRM_HDCP_DDC_V_PRIME(4) },
> + .bcaps = DRM_HDCP_DDC_BCAPS,
> + .bcaps_mask_repeater_present = DRM_HDCP_DDC_BCAPS_REPEATER_PRESENT,
> + .bstatus = DRM_HDCP_DDC_BSTATUS,
> +};
> +
> +static const struct drm_hdcp_hdcp1_receiver_reg_lut drm_hdcp_hdcp1_dpcd_lut = {
> + .bksv = DP_AUX_HDCP_BKSV,
> + .ri = DP_AUX_HDCP_RI_PRIME,
> + .aksv = DP_AUX_HDCP_AKSV,
> + .an = DP_AUX_HDCP_AN,
> + .ainfo = DP_AUX_HDCP_AINFO,
> + .v = { DP_AUX_HDCP_V_PRIME(0), DP_AUX_HDCP_V_PRIME(1),
> + DP_AUX_HDCP_V_PRIME(2), DP_AUX_HDCP_V_PRIME(3),
> + DP_AUX_HDCP_V_PRIME(4) },
> + .bcaps = DP_AUX_HDCP_BCAPS,
> + .bcaps_mask_repeater_present = DP_BCAPS_REPEATER_PRESENT,
> +
> + /*
> + * For some reason the HDMI and DP HDCP specs call this register
> + * definition by different names. In the HDMI spec, it's called BSTATUS,
> + * but in DP it's called BINFO.
> + */
> + .bstatus = DP_AUX_HDCP_BINFO,
> +};
> +
> +static int drm_hdcp_remote_ddc_read(struct i2c_adapter *i2c,
> + unsigned int offset, u8 *value, size_t len)
> +{
> + int ret;
> + u8 start = offset & 0xff;
> + struct i2c_msg msgs[] = { {
> + .addr = DRM_HDCP_DDC_ADDR,
> + .flags = 0,
> + .len = 1,
> + .buf = &start,
> + },
> + { .addr = DRM_HDCP_DDC_ADDR,
> + .flags = I2C_M_RD,
> + .len = len,
> + .buf = value } };
Very strange indentation, I'd say.
> + ret = i2c_transfer(i2c, msgs, ARRAY_SIZE(msgs));
> + if (ret == ARRAY_SIZE(msgs))
> + return 0;
> + return ret >= 0 ? -EIO : ret;
> +}
> +
> +static int drm_hdcp_remote_dpcd_read(struct drm_dp_aux *aux,
> + unsigned int offset, u8 *value, size_t len)
> +{
> + ssize_t ret;
> +
> + ret = drm_dp_dpcd_read(aux, offset, value, len);
> + if (ret != len) {
> + if (ret >= 0)
> + return -EIO;
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int drm_hdcp_remote_read(struct drm_hdcp_helper_data *data,
> + unsigned int offset, u8 *value, u8 len)
> +{
> + if (data->aux)
> + return drm_hdcp_remote_dpcd_read(data->aux, offset, value, len);
> + else
> + return drm_hdcp_remote_ddc_read(data->connector->ddc, offset,
> + value, len);
> +}
> +
> +static int drm_hdcp_remote_ddc_write(struct i2c_adapter *i2c,
> + unsigned int offset, u8 *buffer,
> + size_t size)
> +{
> + int ret;
> + u8 *write_buf;
> + struct i2c_msg msg;
> +
> + write_buf = kzalloc(size + 1, GFP_KERNEL);
> + if (!write_buf)
> + return -ENOMEM;
> +
> + write_buf[0] = offset & 0xff;
> + memcpy(&write_buf[1], buffer, size);
> +
> + msg.addr = DRM_HDCP_DDC_ADDR;
> + msg.flags = 0, msg.len = size + 1, msg.buf = write_buf;
> +
> + ret = i2c_transfer(i2c, &msg, 1);
> + if (ret == 1)
> + ret = 0;
> + else if (ret >= 0)
> + ret = -EIO;
> +
> + kfree(write_buf);
> + return ret;
> +}
> +
> +static int drm_hdcp_remote_dpcd_write(struct drm_dp_aux *aux,
> + unsigned int offset, u8 *value,
> + size_t len)
> +{
> + ssize_t ret;
> +
> + ret = drm_dp_dpcd_write(aux, offset, value, len);
> + if (ret != len) {
> + if (ret >= 0)
> + return -EIO;
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int drm_hdcp_remote_write(struct drm_hdcp_helper_data *data,
> + unsigned int offset, u8 *value, u8 len)
> +{
> + if (data->aux)
> + return drm_hdcp_remote_dpcd_write(data->aux, offset, value,
> + len);
> + else
> + return drm_hdcp_remote_ddc_write(data->connector->ddc, offset,
> + value, len);
> +}
> +
> +static bool drm_hdcp_is_ksv_valid(struct drm_hdcp_ksv *ksv)
> +{
> + /* Valid Ksv has 20 0's and 20 1's */
> + return hweight32(ksv->words[0]) + hweight32(ksv->words[1]) == 20;
> +}
> +
> +static int drm_hdcp_read_valid_bksv(struct drm_hdcp_helper_data *data,
> + struct drm_hdcp_ksv *bksv)
> +{
> + int ret, i, tries = 2;
> +
> + /* HDCP spec states that we must retry the bksv if it is invalid */
> + for (i = 0; i < tries; i++) {
> + ret = drm_hdcp_remote_read(data, data->hdcp1_lut->bksv,
> + bksv->bytes, DRM_HDCP_KSV_LEN);
> + if (ret)
> + return ret;
> +
> + if (drm_hdcp_is_ksv_valid(bksv))
> + break;
> + }
> + if (i == tries) {
> + drm_dbg_kms(data->connector->dev, "Bksv is invalid %*ph\n",
> + DRM_HDCP_KSV_LEN, bksv->bytes);
> + return -ENODEV;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * drm_hdcp_helper_hdcp1_capable - Checks if the sink is capable of HDCP 1.x.
> + *
> + * @data: pointer to the HDCP helper data.
> + * @capable: pointer to a bool which will contain true if the sink is capable.
> + *
> + * Returns:
> + * -errno if the transacation between source and sink fails.
> + */
> +int drm_hdcp_helper_hdcp1_capable(struct drm_hdcp_helper_data *data,
> + bool *capable)
> +{
> + /*
> + * DisplayPort has a dedicated bit for this in DPCD whereas HDMI spec
> + * states that transmitters should use bksv to determine capability.
> + */
> + if (data->aux) {
> + int ret;
> + u8 bcaps;
> +
> + ret = drm_hdcp_remote_read(data, data->hdcp1_lut->bcaps, &bcaps,
> + 1);
> + *capable = !ret && (bcaps & DP_BCAPS_HDCP_CAPABLE);
> + } else {
> + struct drm_hdcp_ksv bksv;
> +
> + *capable = drm_hdcp_read_valid_bksv(data, &bksv) == 0;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_hdcp_helper_hdcp1_capable);
I'd say that all previous code begs to add corresponding callbacks to
the hdcp_helper_data and then just call them instead of manually
multiplexing the code basing on data->aux.
> +
> +static void drm_hdcp_update_value(struct drm_hdcp_helper_data *data, u64 value,
> + bool update_property)
> +{
> + WARN_ON(!mutex_is_locked(&data->mutex));
> +
> + data->value = value;
> + if (update_property) {
> + drm_connector_get(data->connector);
> + schedule_work(&data->prop_work);
> + }
> +}
> +
> +static int
> +drm_hdcp_helper_hdcp1_ksv_fifo_ready(struct drm_hdcp_helper_data *data)
> +{
> + int ret;
> + u8 val, mask;
> +
> + /* KSV FIFO ready bit is stored in different locations on DP v. HDMI */
> + if (data->aux) {
> + ret = drm_hdcp_remote_dpcd_read(data->aux, DP_AUX_HDCP_BSTATUS,
> + &val, 1);
> + mask = DP_BSTATUS_READY;
> + } else {
> + ret = drm_hdcp_remote_ddc_read(data->connector->ddc,
> + DRM_HDCP_DDC_BCAPS, &val, 1);
> + mask = DRM_HDCP_DDC_BCAPS_KSV_FIFO_READY;
> + }
> + if (ret)
> + return ret;
> + if (val & mask)
> + return 0;
> +
> + return -EAGAIN;
> +}
Again, this can go to hdcp-kind ops.
> +
> +static int
> +drm_hdcp_helper_hdcp1_read_ksv_fifo(struct drm_hdcp_helper_data *data, u8 *fifo,
> + u8 num_downstream)
> +{
> + struct drm_device *dev = data->connector->dev;
> + int ret, i;
> +
> + /* Over HDMI, read the whole thing at once */
> + if (data->connector->ddc) {
And here for some reason one choose data->connector->ddc instead of
data->aux, so grepping for data->aux would not return this function.
> + ret = drm_hdcp_remote_ddc_read(
> + data->connector->ddc, DRM_HDCP_DDC_KSV_FIFO, fifo,
> + num_downstream * DRM_HDCP_KSV_LEN);
> + if (ret)
> + drm_err(dev, "DDC ksv fifo read failed (%d)\n", ret);
> + return ret;
> + }
> +
> + /* Over DP, read via 15 byte window (3 entries @ 5 bytes each) */
> + for (i = 0; i < num_downstream; i += 3) {
> + size_t len = min(num_downstream - i, 3) * DRM_HDCP_KSV_LEN;
> + ret = drm_hdcp_remote_dpcd_read(data->aux, DP_AUX_HDCP_KSV_FIFO,
> + fifo + i * DRM_HDCP_KSV_LEN,
> + len);
> + if (ret) {
> + drm_err(dev, "Read ksv[%d] from DP/AUX failed (%d)\n",
> + i, ret);
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int drm_hdcp_helper_hdcp1_read_v_prime(struct drm_hdcp_helper_data *data,
> + u32 *v_prime)
> +{
> + struct drm_device *dev = data->connector->dev;
> + int ret, i;
> +
> + for (i = 0; i < DRM_HDCP_V_PRIME_NUM_PARTS; i++) {
> + ret = drm_hdcp_remote_read(data, data->hdcp1_lut->v[i],
> + (u8 *)&v_prime[i],
> + DRM_HDCP_V_PRIME_PART_LEN);
> + if (ret) {
> + drm_dbg_kms(dev, "Read v'[%d] from failed (%d)\n", i,
> + ret);
> + return ret >= 0 ? -EIO : ret;
> + }
> + }
> + return 0;
> +}
> +
> +static int
> +drm_hdcp_helper_hdcp1_authenticate_downstream(struct drm_hdcp_helper_data *data)
> +{
> + struct drm_connector *connector = data->connector;
> + struct drm_device *dev = connector->dev;
> + u32 v_prime[DRM_HDCP_V_PRIME_NUM_PARTS];
> + u8 bstatus[DRM_HDCP_BSTATUS_LEN];
> + u8 num_downstream, *ksv_fifo;
> + int ret, i, tries = 3;
> +
> + ret = read_poll_timeout(drm_hdcp_helper_hdcp1_ksv_fifo_ready, ret, !ret,
> + 10 * 1000, 5 * 1000 * 1000, false, data);
> + if (ret) {
> + drm_err(dev, "Failed to poll ksv ready, %d\n", ret);
> + return ret;
> + }
> +
> + ret = drm_hdcp_remote_read(data, data->hdcp1_lut->bstatus, bstatus,
> + DRM_HDCP_BSTATUS_LEN);
> + if (ret)
> + return ret;
> +
> + /*
> + * When repeater reports 0 device count, HDCP1.4 spec allows disabling
> + * the HDCP encryption. That implies that repeater can't have its own
> + * display. As there is no consumption of encrypted content in the
> + * repeater with 0 downstream devices, we are failing the
> + * authentication.
> + */
> + num_downstream = DRM_HDCP_NUM_DOWNSTREAM(bstatus[0]);
> + if (num_downstream == 0) {
> + drm_err(dev, "Repeater with zero downstream devices, %*ph\n",
> + DRM_HDCP_BSTATUS_LEN, bstatus);
> + return -EINVAL;
> + }
> +
> + ksv_fifo = kcalloc(DRM_HDCP_KSV_LEN, num_downstream, GFP_KERNEL);
> + if (!ksv_fifo)
> + return -ENOMEM;
> +
> + ret = drm_hdcp_helper_hdcp1_read_ksv_fifo(data, ksv_fifo,
> + num_downstream);
I'd have moved kcalloc into read_ksv_fifo.
> + if (ret) {
> + drm_err(dev, "Failed to read ksv fifo, %d/%d\n", num_downstream,
> + ret);
> + goto out;
> + }
> +
> + if (drm_hdcp_check_ksvs_revoked(dev, ksv_fifo, num_downstream)) {
> + drm_err(dev, "Revoked Ksv(s) in ksv_fifo\n");
> + ret = -EPERM;
> + goto out;
> + }
> +
> + /*
> + * When V prime mismatches, DP Spec mandates re-read of
> + * V prime at least twice.
> + */
> + for (i = 0; i < tries; i++) {
> + ret = drm_hdcp_helper_hdcp1_read_v_prime(data, v_prime);
> + if (ret)
> + continue;
> +
> + ret = data->funcs->hdcp1_store_ksv_fifo(
> + connector, ksv_fifo, num_downstream, bstatus, v_prime);
> + if (!ret)
> + break;
> + }
> + if (ret)
> + drm_err(dev, "Could not validate KSV FIFO with V' %d\n", ret);
> +
> +out:
> + if (!ret)
> + drm_dbg_kms(dev, "HDCP is enabled (%d downstream devices)\n",
> + num_downstream);
> +
> + kfree(ksv_fifo);
> + return ret;
> +}
> +
> +static int drm_hdcp_helper_hdcp1_validate_ri(struct drm_hdcp_helper_data *data)
> +{
> + union {
> + u32 word;
> + u8 bytes[DRM_HDCP_RI_LEN];
> + } ri_prime = { .word = 0 };
> + struct drm_connector *connector = data->connector;
> + struct drm_device *dev = connector->dev;
> + int ret;
> +
> + ret = drm_hdcp_remote_read(data, data->hdcp1_lut->ri, ri_prime.bytes,
> + DRM_HDCP_RI_LEN);
> + if (ret) {
> + drm_err(dev, "Failed to read R0' %d\n", ret);
> + return ret;
> + }
> +
> + return data->funcs->hdcp1_match_ri(connector, ri_prime.word);
> +}
> +
> +static int drm_hdcp_helper_hdcp1_authenticate(struct drm_hdcp_helper_data *data)
> +{
> + union {
> + u32 word;
> + u8 bytes[DRM_HDCP_BSTATUS_LEN];
> + } bstatus;
> + const struct drm_hdcp_helper_funcs *funcs = data->funcs;
> + struct drm_connector *connector = data->connector;
> + struct drm_device *dev = connector->dev;
> + unsigned long r0_prime_timeout, r0_prime_remaining_us = 0, tmp_jiffies;
> + struct drm_hdcp_ksv aksv;
> + struct drm_hdcp_ksv bksv;
> + struct drm_hdcp_an an;
> + bool repeater_present;
> + int ret, i, tries = 3;
> + u8 bcaps;
> +
> + if (funcs->hdcp1_read_an_aksv) {
> + ret = funcs->hdcp1_read_an_aksv(connector, an.words,
> + aksv.words);
> + if (ret) {
> + drm_err(dev, "Failed to read An/Aksv values, %d\n",
> + ret);
> + return ret;
> + }
> +
> + ret = drm_hdcp_remote_write(data, data->hdcp1_lut->an, an.bytes,
> + DRM_HDCP_AN_LEN);
> + if (ret) {
> + drm_err(dev, "Failed to write An to receiver, %d\n",
> + ret);
> + return ret;
> + }
> +
> + ret = drm_hdcp_remote_write(data, data->hdcp1_lut->aksv,
> + aksv.bytes, DRM_HDCP_KSV_LEN);
> + if (ret) {
> + drm_err(dev, "Failed to write Aksv to receiver, %d\n",
> + ret);
> + return ret;
> + }
> + } else {
> + ret = funcs->hdcp1_send_an_aksv(connector);
> + if (ret) {
> + drm_err(dev, "Failed to read An/Aksv values, %d\n",
> + ret);
> + return ret;
> + }
> + }
> +
> + /*
> + * Timeout for R0' to become available. The spec says 100ms from Aksv,
> + * but some monitors can take longer than this. We'll set the timeout at
> + * 300ms just to be sure.
> + */
> + r0_prime_timeout = jiffies + msecs_to_jiffies(300);
> +
> + memset(&bksv, 0, sizeof(bksv));
> +
> + ret = drm_hdcp_read_valid_bksv(data, &bksv);
> + if (ret < 0)
> + return ret;
> +
> + if (drm_hdcp_check_ksvs_revoked(dev, bksv.bytes, 1)) {
> + drm_err(dev, "BKSV is revoked\n");
> + return -EPERM;
> + }
> +
> + ret = drm_hdcp_remote_read(data, data->hdcp1_lut->bcaps, &bcaps, 1);
> + if (ret)
> + return ret;
> +
> + memset(&bstatus, 0, sizeof(bstatus));
> +
> + ret = drm_hdcp_remote_read(data, data->hdcp1_lut->bstatus,
> + bstatus.bytes, DRM_HDCP_BSTATUS_LEN);
> + if (ret)
> + return ret;
> +
> + if (DRM_HDCP_MAX_DEVICE_EXCEEDED(bstatus.bytes[0]) ||
> + DRM_HDCP_MAX_CASCADE_EXCEEDED(bstatus.bytes[1])) {
> + drm_err(dev, "Max Topology Limit Exceeded, bstatus=%*ph\n",
> + DRM_HDCP_BSTATUS_LEN, bstatus.bytes);
> + return -EPERM;
> + }
> +
> + repeater_present = bcaps & data->hdcp1_lut->bcaps_mask_repeater_present;
> +
> + ret = funcs->hdcp1_store_receiver_info(
> + connector, bksv.words, bstatus.word, bcaps, repeater_present);
> + if (ret) {
> + drm_err(dev, "Failed to store bksv, %d\n", ret);
> + return ret;
> + }
> +
> + ret = funcs->hdcp1_enable_encryption(connector);
> + if (ret)
> + return ret;
> +
> + ret = funcs->hdcp1_wait_for_r0(connector);
> + if (ret)
> + return ret;
> +
> + tmp_jiffies = jiffies;
> + if (time_before(tmp_jiffies, r0_prime_timeout))
> + r0_prime_remaining_us =
> + jiffies_to_usecs(r0_prime_timeout - tmp_jiffies);
> +
> + /*
> + * Wait for R0' to become available.
> + *
> + * On DP, there's an R0_READY bit available but no such bit
> + * exists on HDMI. So poll the ready bit for DP and just wait the
> + * remainder of the 300 ms timeout for HDMI.
> + */
> + if (data->aux) {
> + u8 val;
> + ret = read_poll_timeout(
> + drm_hdcp_remote_dpcd_read, ret,
> + !ret && (val & DP_BSTATUS_R0_PRIME_READY), 1000,
> + r0_prime_remaining_us, false, data->aux,
> + DP_AUX_HDCP_BSTATUS, &val, 1);
> + if (ret) {
> + drm_err(dev, "R0' did not become ready %d\n", ret);
> + return ret;
> + }
> + } else {
> + usleep_range(r0_prime_remaining_us,
> + r0_prime_remaining_us + 1000);
> + }
Another hdcp backend function.
> +
> + /*
> + * DP HDCP Spec mandates the two more reattempt to read R0, in case
> + * of R0 mismatch.
> + */
> + for (i = 0; i < tries; i++) {
> + ret = drm_hdcp_helper_hdcp1_validate_ri(data);
> + if (!ret)
> + break;
> + }
> + if (ret) {
> + drm_err(dev, "Failed to match R0/R0', aborting HDCP %d\n", ret);
> + return ret;
> + }
> +
> + if (repeater_present)
> + return drm_hdcp_helper_hdcp1_authenticate_downstream(data);
> +
> + drm_dbg_kms(dev, "HDCP is enabled (no repeater present)\n");
> + return 0;
> +}
> +
> +static int drm_hdcp_helper_hdcp1_enable(struct drm_hdcp_helper_data *data)
> +{
> + struct drm_connector *connector = data->connector;
> + struct drm_device *dev = connector->dev;
> + int i, ret, tries = 3;
> +
> + drm_dbg_kms(dev, "[%s:%d] HDCP is being enabled...\n", connector->name,
> + connector->base.id);
> +
> + /* In case of authentication failures, HDCP spec expects reauth. */
> + for (i = 0; i < tries; i++) {
> + ret = drm_hdcp_helper_hdcp1_authenticate(data);
> + if (!ret)
> + return 0;
> +
> + drm_dbg_kms(dev, "HDCP Auth failure (%d)\n", ret);
> +
> + /* Ensuring HDCP encryption and signalling are stopped. */
> + data->funcs->hdcp1_disable(data->connector);
> + }
> +
> + drm_err(dev, "HDCP authentication failed (%d tries/%d)\n", tries, ret);
> + return ret;
> +}
> +
> +static inline void
> +drm_hdcp_helper_driver_lock(struct drm_hdcp_helper_data *data)
> +{
> + if (data->driver_mutex)
> + mutex_lock(data->driver_mutex);
> +}
> +
> +static inline void
> +drm_hdcp_helper_driver_unlock(struct drm_hdcp_helper_data *data)
> +{
> + if (data->driver_mutex)
> + mutex_unlock(data->driver_mutex);
> +}
> +
> +static int drm_hdcp_helper_enable_hdcp(struct drm_hdcp_helper_data *data,
> + struct drm_atomic_state *state,
> + struct mutex *driver_mutex)
> +{
> + struct drm_connector *connector = data->connector;
> + struct drm_connector_state *conn_state;
> + struct drm_device *dev = connector->dev;
> + unsigned long check_link_interval = DRM_HDCP2_CHECK_PERIOD_MS;
> + bool capable;
> + int ret = 0;
> +
> + conn_state = drm_atomic_get_new_connector_state(state, connector);
> +
> + mutex_lock(&data->mutex);
> +
> + if (data->value == DRM_MODE_CONTENT_PROTECTION_ENABLED) {
> + drm_hdcp_update_value(data, DRM_MODE_CONTENT_PROTECTION_ENABLED,
> + true);
> + goto out_data_mutex;
> + }
> +
> + drm_WARN_ON(dev, data->driver_mutex != NULL);
> + data->driver_mutex = driver_mutex;
> +
> + drm_hdcp_helper_driver_lock(data);
> +
> + if (data->funcs->setup) {
> + ret = data->funcs->setup(connector, state);
> + if (ret) {
> + drm_err(dev, "Failed to setup HDCP %d\n", ret);
> + goto out;
> + }
> + }
> +
> + if (!data->funcs->are_keys_valid ||
> + !data->funcs->are_keys_valid(connector)) {
> + if (data->funcs->load_keys) {
> + ret = data->funcs->load_keys(connector);
> + if (ret) {
> + drm_err(dev, "Failed to load HDCP keys %d\n",
> + ret);
> + goto out;
> + }
> + }
> + }
> +
> + /*
> + * Considering that HDCP2.2 is more secure than HDCP1.4, If the setup
> + * is capable of HDCP2.2, it is preferred to use HDCP2.2.
> + */
> + ret = data->funcs->hdcp2_capable(connector, &capable);
> + if (ret) {
> + drm_err(dev, "HDCP 2.x capability check failed %d\n", ret);
> + goto out;
> + }
> + if (capable) {
> + data->enabled_type = DRM_MODE_HDCP_CONTENT_TYPE1;
> + ret = data->funcs->hdcp2_enable(connector);
> + if (!ret) {
> + check_link_interval = DRM_HDCP2_CHECK_PERIOD_MS;
> + goto out;
> + }
> + }
> +
> + /*
> + * When HDCP2.2 fails and Content Type is not Type1, HDCP1.4 will
> + * be attempted.
> + */
> + ret = drm_hdcp_helper_hdcp1_capable(data, &capable);
> + if (ret) {
> + drm_err(dev, "HDCP 1.x capability check failed %d\n", ret);
> + goto out;
> + }
> + if (capable &&
> + conn_state->content_type != DRM_MODE_HDCP_CONTENT_TYPE1) {
> + data->enabled_type = DRM_MODE_HDCP_CONTENT_TYPE0;
> + ret = drm_hdcp_helper_hdcp1_enable(data);
> + if (!ret)
> + check_link_interval = DRM_HDCP_CHECK_PERIOD_MS;
> + }
> +
> +out:
> + if (!ret) {
> + schedule_delayed_work(&data->check_work, check_link_interval);
> + drm_hdcp_update_value(data, DRM_MODE_CONTENT_PROTECTION_ENABLED,
> + true);
> + }
> +
> + drm_hdcp_helper_driver_unlock(data);
> + if (ret)
> + data->driver_mutex = NULL;
> +
> +out_data_mutex:
> + mutex_unlock(&data->mutex);
> + return ret;
> +}
> +
> +static int drm_hdcp_helper_disable_hdcp(struct drm_hdcp_helper_data *data)
> +{
> + int ret = 0;
> +
> + mutex_lock(&data->mutex);
> + drm_hdcp_helper_driver_lock(data);
> +
> + if (data->value == DRM_MODE_CONTENT_PROTECTION_UNDESIRED)
> + goto out;
> +
> + drm_dbg_kms(data->connector->dev, "[%s:%d] HDCP is being disabled...\n",
> + data->connector->name, data->connector->base.id);
> +
> + drm_hdcp_update_value(data, DRM_MODE_CONTENT_PROTECTION_UNDESIRED,
> + true);
> +
> + if (data->enabled_type == DRM_MODE_HDCP_CONTENT_TYPE1)
> + ret = data->funcs->hdcp2_disable(data->connector);
> + else
> + ret = data->funcs->hdcp1_disable(data->connector);
> +
> + drm_dbg_kms(data->connector->dev, "HDCP is disabled\n");
> +
> +out:
> + drm_hdcp_helper_driver_unlock(data);
> + data->driver_mutex = NULL;
> + mutex_unlock(&data->mutex);
> + cancel_delayed_work_sync(&data->check_work);
> + return ret;
> +}
> +
> +/**
> + * drm_hdcp_helper_atomic_commit - Helper for drivers to call during commit to
> + * enable/disable HDCP
> + *
> + * @data: pointer to the @drm_hdcp_helper_data for the connector
> + * @state: pointer to the atomic state being committed
> + * @driver_mutex: driver-provided lock to be used while interacting with the driver
> + *
> + * This function can be used by display drivers to determine when HDCP should be
> + * enabled or disabled based on the connector state. It should be called during
> + * steady-state commits as well as connector enable/disable. The function will
> + * handle the HDCP authentication/encryption logic, calling back into the driver
> + * when source operations are necessary.
> + *
> + * @driver_mutex will be retained and used for the duration of the HDCP session
> + * since it will be needed for link checks and retries. This mutex is useful if
> + * the driver has shared resources across connectors which must be serialized.
> + * For example, driver_mutex can be used for MST connectors sharing a common
> + * encoder which should not be accessed/changed concurrently. When the
> + * connector's session is torn down, the mutex will be forgotten by the helper
> + * for this connector until the next session.
> + */
> +void drm_hdcp_helper_atomic_commit(struct drm_hdcp_helper_data *data,
> + struct drm_atomic_state *state,
> + struct mutex *driver_mutex)
> +{
> + struct drm_connector *connector = data->connector;
> + struct drm_connector_state *conn_state;
> + bool type_changed;
> +
> + conn_state = drm_atomic_get_new_connector_state(state, connector);
> +
> + type_changed = conn_state->hdcp_content_type != data->enabled_type;
> +
> + if (conn_state->content_protection ==
> + DRM_MODE_CONTENT_PROTECTION_UNDESIRED) {
> + drm_hdcp_helper_disable_hdcp(data);
> + return;
> + }
> +
> + if (!conn_state->crtc) {
> + drm_hdcp_helper_disable_hdcp(data);
> +
> + /* Restore property to DESIRED so it's retried later */
> + if (conn_state->content_protection ==
> + DRM_MODE_CONTENT_PROTECTION_ENABLED) {
> + mutex_lock(&data->mutex);
> + drm_hdcp_update_value(
> + data, DRM_MODE_CONTENT_PROTECTION_DESIRED,
> + true);
> + mutex_unlock(&data->mutex);
> + }
> + return;
> + }
> +
> + /* Already enabled */
> + if (conn_state->content_protection ==
> + DRM_MODE_CONTENT_PROTECTION_ENABLED)
> + return;
> +
> + /* Disable and re-enable HDCP on content type change */
> + if (type_changed)
> + drm_hdcp_helper_disable_hdcp(data);
> +
> + drm_hdcp_helper_enable_hdcp(data, state, driver_mutex);
> +}
> +EXPORT_SYMBOL(drm_hdcp_helper_atomic_commit);
> +
> +static void drm_hdcp_helper_prop_work(struct work_struct *work)
> +{
> + struct drm_hdcp_helper_data *data =
> + container_of(work, struct drm_hdcp_helper_data, prop_work);
> + struct drm_connector *connector = data->connector;
> + struct drm_device *dev = connector->dev;
> +
> + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
> + mutex_lock(&data->mutex);
> +
> + /*
> + * This worker is only used to flip between ENABLED/DESIRED. Either of
> + * those to UNDESIRED is handled by core. If value == UNDESIRED,
> + * we're running just after hdcp has been disabled, so just exit
> + */
> + if (data->value != DRM_MODE_CONTENT_PROTECTION_UNDESIRED)
> + drm_hdcp_update_content_protection(connector, data->value);
> +
> + mutex_unlock(&data->mutex);
> + drm_modeset_unlock(&dev->mode_config.connection_mutex);
> +}
> +
> +static int drm_hdcp_hdcp1_check_link(struct drm_hdcp_helper_data *data)
> +{
> + struct drm_connector *connector = data->connector;
> + struct drm_device *dev = connector->dev;
> + int ret;
> +
> + if (data->funcs->hdcp1_check_link) {
> + ret = data->funcs->hdcp1_check_link(connector);
> + if (ret)
> + goto retry;
> + }
> +
> + /* The link is checked differently for DP and HDMI */
> + if (data->aux) {
> + u8 bstatus;
> + ret = drm_hdcp_remote_dpcd_read(data->aux, DP_AUX_HDCP_BSTATUS,
> + &bstatus, 1);
> + if (ret) {
> + drm_err(dev, "Failed to read dpcd bstatus, %d\n", ret);
> + return ret;
> + }
> + if (bstatus & (DP_BSTATUS_LINK_FAILURE | DP_BSTATUS_REAUTH_REQ))
> + ret = -EINVAL;
> + } else {
> + ret = drm_hdcp_helper_hdcp1_validate_ri(data);
> + if (ret)
> + drm_err(dev, "Ri' mismatch, check failed (%d)\n", ret);
> + }
> + if (!ret)
> + return 0;
> +
> +retry:
> + drm_err(dev, "[%s:%d] HDCP link failed, retrying authentication\n",
> + connector->name, connector->base.id);
> +
> + ret = data->funcs->hdcp1_disable(connector);
> + if (ret) {
> + drm_err(dev, "Failed to disable hdcp (%d)\n", ret);
> + drm_hdcp_update_value(data, DRM_MODE_CONTENT_PROTECTION_DESIRED,
> + true);
> + return ret;
> + }
> +
> + ret = drm_hdcp_helper_hdcp1_enable(data);
> + if (ret) {
> + drm_err(dev, "Failed to enable hdcp (%d)\n", ret);
> + drm_hdcp_update_value(data, DRM_MODE_CONTENT_PROTECTION_DESIRED,
> + true);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int drm_hdcp_hdcp2_check_link(struct drm_hdcp_helper_data *data)
> +{
> + struct drm_connector *connector = data->connector;
> + struct drm_device *dev = connector->dev;
> + int ret;
> +
> + ret = data->funcs->hdcp2_check_link(connector);
> + if (!ret)
> + return 0;
> +
> + drm_err(dev, "[%s:%d] HDCP2 link failed, retrying authentication\n",
> + connector->name, connector->base.id);
> +
> + ret = data->funcs->hdcp2_disable(connector);
> + if (ret) {
> + drm_err(dev, "Failed to disable hdcp2 (%d)\n", ret);
> + drm_hdcp_update_value(data, DRM_MODE_CONTENT_PROTECTION_DESIRED,
> + true);
> + return ret;
> + }
> +
> + ret = data->funcs->hdcp2_enable(connector);
> + if (ret) {
> + drm_err(dev, "Failed to enable hdcp2 (%d)\n", ret);
> + drm_hdcp_update_value(data, DRM_MODE_CONTENT_PROTECTION_DESIRED,
> + true);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void drm_hdcp_helper_check_work(struct work_struct *work)
> +{
> + struct drm_hdcp_helper_data *data = container_of(
> + to_delayed_work(work), struct drm_hdcp_helper_data, check_work);
> + unsigned long check_link_interval;
> +
> + mutex_lock(&data->mutex);
> + if (data->value != DRM_MODE_CONTENT_PROTECTION_ENABLED)
> + goto out_data_mutex;
> +
> + drm_hdcp_helper_driver_lock(data);
> +
> + if (data->enabled_type == DRM_MODE_HDCP_CONTENT_TYPE1) {
> + if (drm_hdcp_hdcp2_check_link(data))
> + goto out;
> + check_link_interval = DRM_HDCP2_CHECK_PERIOD_MS;
> + } else {
> + if (drm_hdcp_hdcp1_check_link(data))
> + goto out;
> + check_link_interval = DRM_HDCP_CHECK_PERIOD_MS;
> + }
> + schedule_delayed_work(&data->check_work, check_link_interval);
> +
> +out:
> + drm_hdcp_helper_driver_unlock(data);
> +out_data_mutex:
> + mutex_unlock(&data->mutex);
> +}
> +
> +/**
> + * drm_hdcp_helper_schedule_hdcp_check - Schedule a check link cycle.
> + *
> + * @data: Pointer to the HDCP helper data.
> + *
> + * This function will kick off a check link cycle on behalf of the caller. This
> + * can be used by DP short hpd interrupt handlers, where the driver must poke
> + * the helper to check the link is still valid.
> + */
> +void drm_hdcp_helper_schedule_hdcp_check(struct drm_hdcp_helper_data *data)
> +{
> + schedule_delayed_work(&data->check_work, 0);
> +}
> +EXPORT_SYMBOL(drm_hdcp_helper_schedule_hdcp_check);
> +
> +static struct drm_hdcp_helper_data *
> +drm_hdcp_helper_initialize(struct drm_connector *connector,
> + const struct drm_hdcp_helper_funcs *funcs,
> + bool attach_content_type_property)
The argument is misnamed. The called function
drm_connector_attach_content_protection_property() uses different name,
better use it instead. Also why would anyone (drm/msm?) not want the
Conent Type propery?
> +{
> + struct drm_hdcp_helper_data *out;
> + int ret;
> +
> + out = kzalloc(sizeof(*out), GFP_KERNEL);
> + if (!out)
> + return ERR_PTR(-ENOMEM);
> +
> + out->connector = connector;
> + out->funcs = funcs;
> +
> + mutex_init(&out->mutex);
> + out->value = DRM_MODE_CONTENT_PROTECTION_UNDESIRED;
> +
> + INIT_DELAYED_WORK(&out->check_work, drm_hdcp_helper_check_work);
> + INIT_WORK(&out->prop_work, drm_hdcp_helper_prop_work);
> +
> + ret = drm_connector_attach_content_protection_property(
> + connector, attach_content_type_property);
> + if (ret) {
> + drm_hdcp_helper_destroy(out);
> + return ERR_PTR(ret);
> + }
> +
> + return out;
> +}
> +
> +/**
> + * drm_hdcp_helper_initialize_dp - Initializes the HDCP helpers for a
> + * DisplayPort connector
> + *
> + * @connector: pointer to the DisplayPort connector.
> + * @funcs: pointer to the vtable of HDCP helper funcs for this connector.
> + * @attach_content_type_property: True if the content_type property should be
> + * attached.
> + *
> + * This function initializes the HDCP helper for the given DisplayPort connector.
> + * This involves creating the Content Protection property as well as the Content
> + * Type property (if desired). Upon success, it will return a pointer to the
> + * HDCP helper data. Ownership of the underlying memory is ttransferredto the
> + * caller and should be freed using drm_hdcp_helper_destroy().
> + *
> + * Returns:
> + * Pointer to newly created HDCP helper data. PTR_ERR on failure.
> + */
> +struct drm_hdcp_helper_data *
> +drm_hdcp_helper_initialize_dp(struct drm_connector *connector,
> + struct drm_dp_aux *aux,
> + const struct drm_hdcp_helper_funcs *funcs,
> + bool attach_content_type_property)
> +{
> + struct drm_hdcp_helper_data *out;
> +
> + out = drm_hdcp_helper_initialize(connector, funcs,
> + attach_content_type_property);
> + if (IS_ERR(out))
> + return out;
> +
> + out->aux = aux;
> + out->hdcp1_lut = &drm_hdcp_hdcp1_dpcd_lut;
> +
> + return out;
> +}
> +EXPORT_SYMBOL(drm_hdcp_helper_initialize_dp);
> +
> +/**
> + * drm_hdcp_helper_initialize_hdmi - Initializes the HDCP helpers for an HDMI
> + * connector
> + *
> + * @connector: pointer to the HDMI connector.
> + * @funcs: pointer to the vtable of HDCP helper funcs for this connector.
> + * @attach_content_type_property: True if the content_type property should be
> + * attached.
> + *
> + * This function initializes the HDCP helper for the given HDMI connector. This
> + * involves creating the Content Protection property as well as the Content Type
> + * property (if desired). Upon success, it will return a pointer to the HDCP
> + * helper data. Ownership of the underlying memory is transferred to the caller
> + * and should be freed using drm_hdcp_helper_destroy().
> + *
> + * Returns:
> + * Pointer to newly created HDCP helper data. PTR_ERR on failure.
> + */
> +struct drm_hdcp_helper_data *
> +drm_hdcp_helper_initialize_hdmi(struct drm_connector *connector,
> + const struct drm_hdcp_helper_funcs *funcs,
> + bool attach_content_type_property)
> +{
> + struct drm_hdcp_helper_data *out;
> +
> + out = drm_hdcp_helper_initialize(connector, funcs,
> + attach_content_type_property);
> + if (IS_ERR(out))
> + return out;
> +
> + out->hdcp1_lut = &drm_hdcp_hdcp1_ddc_lut;
> +
> + return out;
> +}
> +EXPORT_SYMBOL(drm_hdcp_helper_initialize_hdmi);
> +
> +/**
> + * drm_hdcp_helper_destroy - Destroys the given HDCP helper data.
> + *
> + * @data: Pointer to the HDCP helper data.
> + *
> + * This function cleans up and destroys the HDCP helper data created by
> + * drm_hdcp_helper_initialize_dp() or drm_hdcp_helper_initialize_hdmi().
> + */
> +void drm_hdcp_helper_destroy(struct drm_hdcp_helper_data *data)
> +{
> + struct drm_connector *connector;
> +
> + if (!data)
> + return;
> +
> + connector = data->connector;
> +
> + /*
> + * If the connector is registered, it's possible userspace could kick
> + * off another HDCP enable, which would re-spawn the workers.
> + */
> + drm_WARN_ON(connector->dev,
> + connector->registration_state == DRM_CONNECTOR_REGISTERED);
> +
> + /*
> + * Now that the connector is not registered, check_work won't be run,
> + * but cancel any outstanding instances of it
> + */
> + cancel_delayed_work_sync(&data->check_work);
> +
> + /*
> + * We don't cancel prop_work in the same way as check_work since it
> + * requires connection_mutex which could be held while calling this
> + * function. Instead, we rely on the connector references grabbed before
> + * scheduling prop_work to ensure the connector is alive when prop_work
> + * is run. So if we're in the destroy path (which is where this
> + * function should be called), we're "guaranteed" that prop_work is not
> + * active (tl;dr This Should Never Happen).
> + */
> + drm_WARN_ON(connector->dev, work_pending(&data->prop_work));
> +
> + kfree(data);
> +}
> +EXPORT_SYMBOL(drm_hdcp_helper_destroy);
> diff --git a/include/drm/display/drm_hdcp.h b/include/drm/display/drm_hdcp.h
> index 96a99b1377c0..75694baf72d4 100644
> --- a/include/drm/display/drm_hdcp.h
> +++ b/include/drm/display/drm_hdcp.h
> @@ -36,6 +36,7 @@
> #define DRM_HDCP_DDC_BKSV 0x00
> #define DRM_HDCP_DDC_RI_PRIME 0x08
> #define DRM_HDCP_DDC_AKSV 0x10
> +#define DRM_HDCP_DDC_AINFO 0x15
> #define DRM_HDCP_DDC_AN 0x18
> #define DRM_HDCP_DDC_V_PRIME(h) (0x20 + h * 4)
> #define DRM_HDCP_DDC_BCAPS 0x40
> @@ -123,6 +124,19 @@
> #define HDCP_2_2_DEV_COUNT_HI(x) ((x) & BIT(0))
> #define HDCP_2_2_DEPTH(x) (((x) & (0x7 << 1)) >> 1)
>
> +struct drm_hdcp_ksv {
> + union {
> + u32 words[2];
> + u8 bytes[DRM_HDCP_KSV_LEN];
> + };
> +};
> +struct drm_hdcp_an {
> + union {
> + u32 words[2];
> + u8 bytes[DRM_HDCP_AN_LEN];
> + };
> +};
> +
> struct hdcp2_cert_rx {
> u8 receiver_id[HDCP_2_2_RECEIVER_ID_LEN];
> u8 kpub_rx[HDCP_2_2_K_PUB_RX_LEN];
> @@ -295,4 +309,156 @@ struct hdcp_srm_header {
> #define DRM_MODE_HDCP_CONTENT_TYPE0 0
> #define DRM_MODE_HDCP_CONTENT_TYPE1 1
>
> -#endif
> +struct drm_connector;
> +struct drm_atomic_state;
> +
> +/**
> + * struct drm_hdcp_helper_funcs - A vtable of function hooks for the hdcp helper
> + *
> + * These hooks are used by the hdcp helper to call into the driver/connector
> + * code to read/write to hw.
> + */
> +struct drm_hdcp_helper_funcs {
> + /**
> + * @setup - Performs driver-specific setup before hdcp is enabled
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*setup)(struct drm_connector *connector,
> + struct drm_atomic_state *state);
I think all the troubles of the drm/msm code trying to get dp_display
from drm_connector could have been avoided if this API allowed one to
pass private data. This is not the case for Intel, but in drm/msm case
we have a chain of bridges, so establishing a link from connector to the
driver's private data is not an obvious thing.
> +
> + /**
> + * @are_keys_valid - Checks if the HDCP transmitter keys are valid
> + *
> + * Returns: true if the display controller has valid keys loaded
> + */
> + bool (*are_keys_valid)(struct drm_connector *connector);
> +
> + /**
> + * @load_keys - Instructs the driver to load its HDCP transmitter keys
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*load_keys)(struct drm_connector *connector);
> +
> + /**
> + * @hdcp2_capable - Checks if both source and sink support HDCP 2.x
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*hdcp2_capable)(struct drm_connector *connector, bool *capable);
> +
> + /**
> + * @hdcp2_enable - Enables HDCP 2.x on the specified connector
> + *
> + * Since we don't have multiple examples of HDCP 2.x enablement, we
> + * provide the bare minimum support for HDCP 2.x help. Once we have
> + * more examples, perhaps we can be more helpful.
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*hdcp2_enable)(struct drm_connector *connector);
> +
> + /**
> + * @hdcp2_check_link - Checks the HDCP 2.x link on a specified connector
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*hdcp2_check_link)(struct drm_connector *connector);
> +
> + /**
> + * @hdcp2_disable - Disables HDCP 2.x on the specified connector
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*hdcp2_disable)(struct drm_connector *connector);
> +
> + /**
> + * @hdcp1_read_an_aksv - Reads transmitter's An & Aksv from hardware
> + *
> + * Use this function if hardware allows reading the transmitter's An and
> + * Aksv values from the kernel. If your hardware will not allow this,
> + * use hdcp1_send_an_aksv() and implement the transmission in the
> + * driver.
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*hdcp1_read_an_aksv)(struct drm_connector *connector, u32 *an,
> + u32 *aksv);
> +
> + /**
> + * @hdcp1_send_an_aksv - Sends transmitter's An & Aksv to the receiver
> + *
> + * Only implement this on hardware where An or Aksv are not accessible
> + * from the kernel. If these values can be read, use
> + * hdcp1_read_an_aksv() instead.
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*hdcp1_send_an_aksv)(struct drm_connector *connector);
> +
> + /**
> + * @hdcp1_store_receiver_info - Stores the receiver's info in the transmitter
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*hdcp1_store_receiver_info)(struct drm_connector *connector,
> + u32 *ksv, u32 status, u8 caps,
> + bool repeater_present);
> +
> + /**
> + * @hdcp1_enable_encryption - Enables encryption of the outgoing signal
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*hdcp1_enable_encryption)(struct drm_connector *connector);
> +
> + /**
> + * @hdcp1_wait_for_r0 - Wait for transmitter to calculate R0
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*hdcp1_wait_for_r0)(struct drm_connector *connector);
> +
> + /**
> + * @hdcp1_match_ri - Matches the given Ri from the receiver with Ri in
> + * the transmitter
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*hdcp1_match_ri)(struct drm_connector *connector, u32 ri_prime);
> +
> + /**
> + * @hdcp1_post_encryption - Allows the driver to confirm encryption and
> + * perform any post-processing
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*hdcp1_post_encryption)(struct drm_connector *connector);
> +
> + /**
> + * @hdcp1_store_ksv_fifo - Write the receiver's KSV list to transmitter
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*hdcp1_store_ksv_fifo)(struct drm_connector *connector,
> + u8 *ksv_fifo, u8 num_downstream,
> + u8 *bstatus, u32 *vprime);
> +
> + /**
> + * @hdcp1_check_link - Allows the driver to check the HDCP 1.x status
> + * on a specified connector
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*hdcp1_check_link)(struct drm_connector *connector);
> +
> + /**
> + * @hdcp1_disable - Disables HDCP 1.x on the specified connector
> + *
> + * Returns: 0 on success, -errno on failure
> + */
> + int (*hdcp1_disable)(struct drm_connector *connector);
> +};
> +
> +#endif // INCLUDE_DRM_DISPLAY_DRM_HDCP_H_
> diff --git a/include/drm/display/drm_hdcp_helper.h b/include/drm/display/drm_hdcp_helper.h
> index cb2cc5002f65..dbbaced148f2 100644
> --- a/include/drm/display/drm_hdcp_helper.h
> +++ b/include/drm/display/drm_hdcp_helper.h
> @@ -15,11 +15,39 @@ struct drm_atomic_state;
> struct drm_device;
> struct drm_connector;
>
> +struct drm_hdcp_helper_data;
> +struct drm_dp_aux;
> +struct i2c_adapter;
> +struct mutex;
> +
> int drm_hdcp_check_ksvs_revoked(struct drm_device *dev, u8 *ksvs, u32 ksv_count);
> int drm_connector_attach_content_protection_property(struct drm_connector *connector,
> bool hdcp_content_type);
> void drm_hdcp_update_content_protection(struct drm_connector *connector, u64 val);
> bool drm_hdcp_atomic_check(struct drm_connector *connector,
> struct drm_atomic_state *state);
> +void drm_hdcp_atomic_commit(struct drm_atomic_state *state,
> + struct drm_connector *connector);
> +
> +struct drm_hdcp_helper_data *
> +drm_hdcp_helper_initialize_dp(struct drm_connector *connector,
> + struct drm_dp_aux *aux,
> + const struct drm_hdcp_helper_funcs *funcs,
> + bool attach_content_type_property);
> +
> +struct drm_hdcp_helper_data *
> +drm_hdcp_helper_initialize_hdmi(struct drm_connector *connector,
> + const struct drm_hdcp_helper_funcs *funcs,
> + bool attach_content_type_property);
> +
> +void drm_hdcp_helper_destroy(struct drm_hdcp_helper_data *data);
> +
> +int drm_hdcp_helper_hdcp1_capable(struct drm_hdcp_helper_data *data,
> + bool *capable);
> +void drm_hdcp_helper_atomic_commit(struct drm_hdcp_helper_data *data,
> + struct drm_atomic_state *state,
> + struct mutex *driver_mutex);
> +
> +void drm_hdcp_helper_schedule_hdcp_check(struct drm_hdcp_helper_data *data);
>
> -#endif
> +#endif // INCLUDE_DRM_DISPLAY_DRM_HDCP_HELPER_H_"
Not related.
--
With best wishes
Dmitry
Powered by blists - more mailing lists