[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230119140453.3942340-8-abel.vesa@linaro.org>
Date: Thu, 19 Jan 2023 16:04:48 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Rob Herring <robh@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
"vkoul@...nel.org" <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: [PATCH v4 07/12] phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new lane shared PCIE specific offsets in a dedicated
header file.
Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
This patchset relies on the following patchset:
https://lore.kernel.org/all/20230117224148.1914627-1-abel.vesa@linaro.org/
The v3 of this patchset is:
https://lore.kernel.org/all/20230118005328.2378792-1-abel.vesa@linaro.org/
Changes since v3:
* none
Changes since v2:
* none
Changes since v1:
* split all the offsets into separate patches, like Vinod suggested
.../phy-qcom-qmp-qserdes-ln-shrd-v6.h | 32 +++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 1 +
2 files changed, 33 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
new file mode 100644
index 000000000000..86d7d796d5d7
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_
+#define QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_
+
+#define QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL 0xa0
+#define QSERDES_V6_LN_SHRD_RX_Q_EN_RATES 0xb0
+#define QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1 0xb4
+#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1 0xc4
+#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2 0xc8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0 0xd4
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1 0xd8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2 0xdc
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3 0xe0
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4 0xe4
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B5 0xe8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B6 0xec
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE210 0xf0
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE3 0xf4
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE210 0xf8
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE3 0xfc
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE210 0x100
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE3 0x104
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH4_RATE3 0x10c
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH5_RATE3 0x114
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH6_RATE3 0x11c
+#define QSERDES_V6_LN_SHRD_RX_SUMMER_CAL_SPD_MODE 0x128
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index e5974e6caf51..148663ee713a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -24,6 +24,7 @@
#include "phy-qcom-qmp-qserdes-com-v6.h"
#include "phy-qcom-qmp-qserdes-txrx-v6.h"
#include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
+#include "phy-qcom-qmp-qserdes-ln-shrd-v6.h"
#include "phy-qcom-qmp-qserdes-pll.h"
--
2.34.1
Powered by blists - more mailing lists