[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221213-sm6350-cci-v2-0-15c2c14c34bb@fairphone.com>
Date: Fri, 20 Jan 2023 14:13:43 +0100
From: Luca Weiss <luca.weiss@...rphone.com>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Loic Poulain <loic.poulain@...aro.org>,
Robert Foss <rfoss@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
linux-i2c@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Luca Weiss <luca.weiss@...rphone.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v2 0/4] Add CCI bus support for SM6350
Add the camera clock controller node and CCI nodes to sm6350 dtsi and enable
the i2c busses on Fairphone 4 dts.
This is tested using PM8008 regulator patches from the lists which power the
cameras, and using i2cdetect/i2cget/i2cset reading the sensor ID registers.
Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
---
Changes in v2:
- Correct ordering of attributes in sm6350.dtsi (#*-cells, pinctrl-names,
bias-*)
- Link to v1: https://lore.kernel.org/r/20221213-sm6350-cci-v1-0-e5d0c36e0c4f@fairphone.com
---
Luca Weiss (4):
dt-bindings: i2c: qcom-cci: Document SM6350 compatible
arm64: dts: qcom: sm6350: Add camera clock controller
arm64: dts: qcom: sm6350: Add CCI nodes
arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
.../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 +
arch/arm64/boot/dts/qcom/sm6350.dtsi | 141 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 20 +++
3 files changed, 163 insertions(+)
---
base-commit: 1578f85d549045aac441821064e7953732460e51
change-id: 20221213-sm6350-cci-38baf19ace3b
Best regards,
--
Luca Weiss <luca.weiss@...rphone.com>
Powered by blists - more mailing lists