linux-kernel - Re: [PATCH v4 1/3] dt-bindings: reset: syscon-reboot: Add priority property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230122112744.vdfho4mzpgm6oucm@pali>
Date:   Sun, 22 Jan 2023 12:27:44 +0100
From:   Pali Rohár <pali@...nel.org>
To:     Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Sebastian Reichel <sre@...nel.org>
Cc:     linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 1/3] dt-bindings: reset: syscon-reboot: Add priority
 property

Reminder: Any plan how to handle these patches?

On Monday 26 December 2022 12:45:11 Pali Rohár wrote:
> This new optional priority property allows to specify custom priority level
> of reset device. Prior this change priority level was hardcoded to 192 and
> not possible to specify or change. Specifying other value is needed for
> some boards. Default level when not specified stays at 192 as before.
> 
> Signed-off-by: Pali Rohár <pali@...nel.org>
> 
> ---
> Changes in v4:
> * Use restart-handler.yaml
> 
> Changes in v3:
> * Add explanation into commit message
> 
> Changes in v2:
> * Change sint32 to int32
> * Add default
> ---
>  .../devicetree/bindings/power/reset/syscon-reboot.yaml      | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> index da2509724812..f721bdf63a98 100644
> --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> @@ -19,6 +19,9 @@ description: |+
>    sub-node of a "syscon", "simple-mfd" node. Though the regmap property
>    pointing to the system controller node is also supported.
>  
> +allOf:
> +  - $ref: restart-handler.yaml#
> +
>  properties:
>    compatible:
>      const: syscon-reboot
> @@ -42,6 +45,9 @@ properties:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      description: The reset value written to the reboot register (32 bit access).
>  
> +  priority:
> +    default: 192
> +
>  required:
>    - compatible
>    - offset
> -- 
> 2.20.1
>